Driver Cooling & Hydration

Chillout Systems Hose Connectors (Pair) Designed to withstand wear, these military-grade cooling adapters improve the reliability of the Chillout Quantum Cooler by latching securely and enabling coolant formula to cycle through the system with no leakage. This ultra-durable design allows thousands of dry connections and disconnections. Sold in pairs

Stilo Helmet Hydration Kit Upgrade your racing experience with the Stilo Hydration Kit, designed to keep you hydrated during intense competitions. Designed specifically for Stilo ST5 and ST6 helmets, this kit includes three essential components: the Bite Valve (YA0601), Silicone Tubing (YA0602), and Straight Male Coupling End (YA0603).1 Engineered to seamlessly integrate into the helmet and run behind the cheek pad, the quick-release connector allows for easy attachment to a variety of drink devices found on the market. Whether you're driving the ST5/ST6 FN or GT model, this hydration system ensures convenient access to refreshment without compromising performance. With the ability to fit snugly into the ST5/ST6 GT side ports or front vent of the ST5 FN helmet, this kit offers versatility and comfort. Stay focused on the track while staying hydrated with the Stilo Hydration Kit. Stilo Helmet Hydration Kit Includes (1) Male hydration connector (YA0603) (1) Hydration tube (YA0602) (1) Bite valve (YA0601) 1 Note: YA0604 female hydration connector is sold separately.

Stilo ST5 Helmet Hydration Kit Connectors Male and female Stilo hydration kit quick-connectors priced individually to help you customize your drink-it installation to your needs.

Chillout Systems Carbon Fiber Air Duct Plenum Forcing fresh air to your cooler is the most efficient way to increase cooling performance and reduce amp draw from your electrical system. This plenum fits perfectly to the intake side of your Quantum Cooler, allowing much cooler air to be forced through the system via any three-inch duct (cooler, ducting, and intake scoop not included). A minimum Uber3 blower (sold separately) should be used in conjunction with the plenum in order to cool properly. This carbon fiber plenum attaches via automotive-grade adhesive tape, creating a firm seal to keep the cooler pressurized with incoming cool air. This forces cool air all the way through the system and back out the exhaust side of the cooler, the most efficient way to reach maximum cooling capacity. Coupling the Chillout Systems Air Duct Plenum with your Quantum Cooler ensures no cool air is wasted, maximizing the effectiveness of the system.  

Paragon Blower Air Filter Screen Paragon’s Blower Air Filter Screen is a metal screen perfectly sized for the Paragon 240 CFM blower . The Blower Air Filter Screen helps keep large debris from entering the blower. The Paragon Blower Air Filter Screen slots perfectly into the intake side of your Paragon blower with no appreciable effect on airflow.

Paragon Defense Solution 16 Oz. Paragon Defense Solution enhances cooler, garment, and hose performance in your driver cooling system by defending against mold and bacteria growth. Paragon Defense Solution is formulated to safeguard your cooling investments against mold, mildew, and harmful bacteria that cause reduced water flow and musty odors. Paragon Defense Solution is non-toxic, biodegradable, and environmentally friendly. It's also compatible with non-Paragon ice water-based coolers. This non-toxic, biodegradable solution contains a fungicide that is safe to use in all Paragon cooling systems. Regular use of Paragon Defense Solution will not only help keep your system clean, it will also improve the performance and life of your system's fluid pump. Use 2 oz. of additive every time your driver cooling system is used (or 6 oz. for the large, multi-person pit cooling systems).

Paragon O-Ring Pack The Paragon O-Ring Pack contains six new O-rings to replace a dry, cracked, or torn O-ring on any Paragon male connector.

Paragon Everlast Ice Paragon’s Everlast Ice allows for longer cooling periods when added to ice and water in any Paragon cooler or Paragon cooler bag. Paragon Everlast Ice should be kept in a freezer until you're ready to use it. Compatible with non-Paragon coolers. Paragon Everlast Ice is the perfect solution for keeping the water in your Paragon Viking cooler ice-cold at the track. No more running to the store for more ice! Paragon Everlast Ice Details Manufacturer: Paragon Weight: 1 lb. Reusable and economical Leakproof, non-toxic gel Long lasting cold Efficient transfer of energy

Paragon Ignite Pro FR SFI 3.3 Rated Cooling Shirt The Paragon Ignite Pro FR is the long-sleeve, amped-up version of Paragon’s Ignite cooling top and includes double the tubing compared to the Paragon Ignite top. The Paragon Ignite Pro FR cooling top is the premier choice when prioritizing cooling capacity over ice retention. The garment is a 4.8 oz Modacrylic and FR Rayon blend with intense quick-drying qualities and ample tubing to cover your core. Keep Cool With SFI 3.3 Rated Protection The Paragon Ignite Pro FR long sleeve cooling top meets SFI 3.3 specifications. Available in sizes Small through XXL with a true-to-size fit and right- or left-exit tubing. Paragon also offers the unique option of adding tubing to the sleeves of the Ignite Pro FR when cooling more than just the core is needed. Compatible with the full line of Paragon cooling systems and accessories. If you have ever wanted more cooling, the Paragon Ignite Pro FR series is for you. Paragon Ignite Pro FR Cooling Shirt Details Manufacturer: Paragon Flame resistance rating: SFI 3.3 certified Tubing exit: choose left- or right-exit Construction: Modacrylic/FR Rayon blend for superior moisture wicking Anti-microbial: Ag47 protection Double the tubing of standard cooling shirt Won’t shrink, pick, or fade Extra length Clean seams for all-day comfort Machine wash, machine dry

Paragon Viking Pro Air & Water Cooler The Paragon’s Viking Pro Cooler is the amped-up version of the Viking Cooler. The Viking Pro Cooler is built to be durable and efficient with its 12-volt pump providing constant circulation of cold water through Paragon cooling garments. The addition of a u-shaped aluminum air tube inside the cooler, designed specifically for helmet cooling, when connected to a blower system, is what makes this Paragon’s Pro version. The side exit Guardian bulkhead connectors are Paragon’s emergency release option allowing an easy disconnect when a quick pull motion is applied to the connected hose set or garment. The Viking Pro Cooler is available in a 12L or 18L option and works seamlessly with most cool suit brands. Click here for installation instructions. Paragon Pro Air & Water Cooler Dimensions 12 Liter: 10 lbs, 19" x 13" x 13" 18 Liter: 10 lbs, 19" x 13" x 13" Paragon cooling garments sold separately.

Paragon Guardian Female Hose PARAGON GUARDIAN CONNECTOR FEATURES 1/4" or 5/16" connector that work with your Paragon Viking system as well as others. Sold individually, you'll need two to adapt a garment properly. SYSTEM COMPATIBILITY (Paragon/Coolshirt/Momo/F.A.S.T.): Paragon’s Guardian Connector is offered as a replacement for existing 1/4” or 5/16" Guardian Connectors used on non-Paragon branded hose sets, as well as all Paragon Hose Sets. The Guardian Connectors are Paragon’s emergency release option allowing an easy disconnect when a quick pull motion is applied to the connected garment.

Paragon Complete Viking System All-In-One Kit Discovery Parts assembled this kit putting everything you need to reduce fatigue, reaction time, and dehydration all in one place! Anyone who uses a Paragon system will tell you, once you race with one you'll never race without it. Our Complete Viking System All-In-One Kit makes it easy to assemble everything you need, and you save money versus buying the pieces separately! Viking coolers have been seriously upgraded in recent years, with new encapsulated pumps rated for an incredible 25,000 hours of continuous operation. Each Paragon Complete Viking System Kit includes the following: Your choice of a 12- or 18-liter Paragon Viking system cooler A Paragon cooler mounting tray 16 oz. of Defense Solution Maintenance Additive to keep you system sanitary A Paragon Guardian 8-foot insulated water supply/return hose The Paragon Complete Viking System is the preferred choice for racers at all levels of the motorsport. Whether you race with NASA, PCA, SCCA, IMCA, Chump Car, LeMons, WRL or any other organization, this system's ease of use and unparalleled quality will keep you performing at your peak. Paragon Cooling Water Shirts (Sold Separately) A variety of Paragon cooling shirts are available separately to create a complete driver cooling package customized to your needs! The Paragon Cooling Water Shirt contains about 50 feet of medical-grade capillary tubing securely stitched on the front and back of the shirt, covering up to 40% of the body. It connects to the cooler via insulated hose with dry quick-disconnects. You can upgrade to the Paragon Pro Cooling Shirt with double the tubing of the standard Paragon Short Sleeve shirt. This provides even more efficient heat transfer, keeping your core temperature stable for longer. Or combine cooling with fire protection by adding Paragons's newest SFI 3.3 Rated Ignite Pro FR shirt with the same double-tubing sewn into a long-sleeve SFI 3.3 flame-resistant shirt. Paragon Viking Cooler Details: 12-liter: 7 lbs, 16" x 10" x 12" 18-liter: 9 lbs, 17" x 11" x 14"

Paragon Viking Extreme Max 110V Team Cooler Paragon’s 61L Viking Extreme Max multi-person 110V cooler is an absolutely amazing multi-person cooling option for racers with access to 110-volt power. In fact, keeping cool with the Viking Extreme Max is so fantastic on those sweltering afternoons in the paddock or pits, we would get a generator just to plug in an Extreme Max cooler. The 61L capacity Paragon Viking Extreme Max cooler is built in the USA to be durable enough to stand up to race weekends, and ultra-efficient with its 110-volt fluid pump providing strong, constant circulation of chilled water through several Paragon cooling garments at the same time. This large-capacity cooler works exclusively with Paragon cooling garments. American Made Race Team Cooling Perfection The American-made Paragon Viking Extreme Max Cooler keeps you and your team cool, comfortable, and alert so everyone can perform at their best in the heat of competition. Heat fatigue is a big factor in loss of focus and concentration. Now everyone can stay cool waiting in the pits for each fuel stop or driver change. Paragon Viking Extreme Max Cooler Details Manufacturer: Paragon Manufacturer part no.: 80-23100 Cooler capacity: 61 liters Operating voltage: 110V Dimensions (external): 30.5"L x 17.25"W x 17"H Weight (dry): 34 lbs Cooling garment connections: 6 outlets/inlets

Paragon Viking Pro Air & Water Cooling Bundle The Paragon Viking Pro Air & Water Bundle can be used with any Paragon cooling garment. It effectively sends temperature-controlled cooling water through the garment along with blower-enhanced, cooled, HEPA-4 filtered air to your helmet.  The Paragon Viking Pro Air & Water Bundle provides 300 Watts (1,023 BTU) of continuous cooling per hour. Its 240 CFM blower and 12- or 18-Liter cooler unit with internal pump deliver temperature-controlled cool water to your Paragon cooling garment (sold separately) and chilled air to your helmet. Eight feet of double-insulated water hose, complete with dry quick-disconnects and an automatic shutoff, attach your cooling shirt to the unit. Paragon Viking Pro Air & Water Bundle Details Manufacturer: Paragon Paragon 12- or 18-liter cooler with internal 12V fluid pump Cooler mounting tray with two straps 8-foot insulated Guardian water supply hose with dry-break disconnects 240 CFM air blower 10 foot x 1.25" air hose 5 foot x 3.0" air hose 1.25" hose end fittings (2) Angled helmet fitting 4" blower hose fitting 4" blower filter housing fitting Blower air filter Blower air filter screen Everlast Ice cool pack Defense Solution (16 oz.) Paragon cooling garments sold separately.