Driver Cooling & Hydration

Paragon Guardian Water Hose Set Paragon’s innovative Guardian Water Supply/Return Hose Set is designed for efficiency and durability. The Guardian Hose is insulated to keep your cooling garment supplied with icy cold water from a Paragon Viking or Arctic Fox cooler. The supply side of the Paragon Guardian Water Supply Hose delivers cooling water to the tubing inlet of your garment, while the return side of the hose set returns water warmed by body heat back to the cooler to be re-chilled and recirculated. Foam insulation acts as a thermal barrier to properly maintain the temperature of the water being supplied to your cooling garment. Paragon Guardian connectors on the hose set are designed for emergency release, allowing you to easily disconnect with a quick pull on the hose set or garment. Paragon Guardian Supply Hose Lengths 4 feet (2 lbs.) 8 feet (2 lbs.) 12 feet (3 lbs.) 20 feet (4 lbs.)

Paragon 1.5" Air Supply Hose (10 Feet) Paragon’s 1.5” diameter x 10’ length Air Hose is designed to work with Paragon Viking Pro coolers, Viking Pro Bundles, and Air Blower Bundles. At 1.5” diameter, the Paragon Air Hose is small and flexible enough to route to your helmet without any necessary weight, giving you great head cooling while aiding in keeping fog off your visor. Paragon 1.5" Air Supply Hose Details Manufacturer: Paragon Manufacturer part no.: 02-45000 Hose OD: 1.5" Hose length: 10 feet Weight: 2 lbs.

Paragon 4.4AH Li-Ion Arctic Wolf/Fox Battery Paragon’s Wolf/Fox Battery Charger is designed for use with the Paragon Arctic Wolf/Fox Li-Ion Battery. The Arctic Wolf/Fox Battery Charger has an indicator light that illuminates bright green when your battery is fully charged. Plugs into any standard US 110-120V electrical outlet. Paragon Arctic Wolf/Fox Battery Charger Details Manufacturer: Paragon Manufacturer part no.: 03-29400 Input voltage: 110-120V Battery included: no Weight: 1 lb.

Paragon Drain Kit Paragon’s Drain Kit is the ultimate accessory for draining water from Paragon cooling garments, hose sets, coolers, and bags. The Paragon Drain Kit includes two male connectors and two female connectors.

Paragon 3.0" Air Supply Hose (5 Feet) Paragon’s 3” diameter x 5’ length Air Hose is designed to work with most NACA ducts on the market, channeling fresh air from outside the car to feed your Paragon 240 CFM blower. When connected to a Viking Pro Cooler, this provides optimized cool air flow into your helmet for excellent head cooling. Paragon 3.0" Air Supply Hose Details Manufacturer: Paragon Manufacturer part no.: 03-45000 Hose OD: 3.0" Hose length: 5 feet Weight: 2 lbs.

Paragon 4.0" Blower Filter Housing Fitting Paragon’s 4” Blower Filter Housing Fitting is custom made for connecting Paragon’s 3” Air Hose to the 4" inlet of Paragon’s 240 CFM Air Blower. The Paragon 4” Blower Filter Housing Fitting is made to house Paragon’s Blower Air Filter Screen and Paragon’s Blower Air Filter. Each sold separately

Paragon 4.0" Blower Hose Fitting Paragon’s 4” Blower Hose Fitting is custom made for connecting the Paragon 1.25” Air Hose to Paragon’s 240 CFM Air Blower.

Paragon Guardian Female Bulkhead Connector Paragon’s Guardian Female Bulkhead Connector is available as a replacement for a damaged female Guardian Bulkhead Connector on any Paragon Viking, Viking Pro, or Viking Pro Dual cooler, as well as Arctic Wolf, Arctic Wolf Pro, Arctic Fox and Arctic Fox Pro cooler bags. The Guardian Female Bulkhead Connector is Paragon’s emergency release connector option, allowing easy disconnection from your cooling system with a quick pull on the connected hose set or cooling garment. Priced/sold individually. Paragon Guardian Female Bulkhead Connector Details Manufacturer: Paragon Emergency release: yes Replaces broken fitting on your Paragon Viking cooler or cooler bag Sold individually

Paragon Arctic Wolf/Fox Pro Battery Pigtail Paragon’s Arctic Wolf/Fox Battery Pigtail is available as a replacement for the factory-installed pigtail on any Arctic Wolf Pro or Arctic Fox Pro cooler bag. Paragon Arctic Wolf/Fox Pro Battery Pigtail Details Manufacturer: Paragon Manufacturer part no.: 04-29400 Length: 10 inches Weight: 1 lbs.

Paragon 1.25" Angled Helmet Fitting Paragon’s Angled Helmet Fitting is custom-made for connecting Paragon’s 1.25” Air Hose to your helmet's air-inlet with a diameter of 1.3”. The fitting's 45° angle helps keep overall height to a minimum, avoiding overhead obstructions like roll cage bars to help maintain your range of movement.

Paragon 1.5" Hose End Fitting Paragon’s 1.5” Hose End Fitting is custom made for connecting Paragon 1.5” Air Hose to the PVC inlet of your Paragon Viking Pro or Viking Pro Dual cooler.

Paragon Viking Cooler Mounting Tray Strap Paragon’s Viking Tray Strap is designed exclusively for use with Paragon’s Viking Coolers and Viking Mounting Trays. The Paragon Viking Tray Strap's unique design allows access to the interior of the cooler without having to remove the cooler from the mounting tray. Two straps are needed per Viking Cooler/Viking Tray. Fits either the 12L or 18L Paragon Viking cooler mounting tray.

Paragon Laundry Bag Paragon’s Laundry Bag is the perfect accessory for any Paragon cooling garment. The nylon Paragon Laundry Bag comes in white or black, and protects your Paragon cooling garment investment during repeated laundering. Paragon Laundry Bag Details Manufacturer: Paragon Manufacturer part no.: 01-59000 (black), 02-59000 (white) Colors: black or white Dimensions: 10" x 6" x 1" Weight: 1 lbs.

Paragon Guardian Hose Connector Paragon’s Guardian Male Connector is a replacement for any existing 1/4” or 5/16" Guardian Connector used on Paragon cooling garments and Guardian water hose sets. The Guardian Male Connector functions as a dry-break emergency release, allowing you to easily disconnect from your cooling system with a quick pull on your water hose set or connected garment. Compatible With Paragon, Coolshirt, Momo, and F.A.S.T. The Paragon Guardian Male Connector is compatible with female connectors used by Paragon, Coolshirt, Momo, and F.A.S.T. This means that, no matter what brand of driver cooling system you have, a Paragon cooling shirt will work with it because the shirt has two Paragon Guardian Male Connectors (inlet/supply and outlet/return) If you own a Momo or F.A.S.T. cooling shirt and want to use it with a Paragon system, simply purchase two of these Guardian male connectors, snip off the connectors on your shirt, and replace them with the Guardians. That's it! Paragon Guardian Male Connector Details Manufacturer: Paragon Connector type: male Barbed-end size: regular 1/4" (6mm) or large 5/16" (8mm) Universal dry-break connector Priced/sold individually