Helmet Shields

Stilo Anti-Fog/Anti-Scratch Short Visor for the ST5 Helmet Stilo ST5 short visors fit all Stilo SA2020, SA2015, FIA 8859/8860 non-ABP model helmets. Stilo visors are available in over 4 different colors in different levels of gradient to make sure you have the perfect shield for every race condition. From the Stilo dark smoke to a selection of multiple iridiums, Stilo ST5 visors are a great way to ensure your best vision and lap time. Stilo ST5 GT Visor Part Number Chart: YA0854 ST5 Mirror dark visor YA0836 ST5 Iridium blue dark visor YA0837.2 ST5 Iridium red dark visor YA0838 ST5 Iridium yellow dark visor - Not FIA Certified High quality, Anti-fog visors shaped for the Stilo ST5 GT helmets. The Stilo ST5 series is unique in that the shield lock is located in the center position of the shield. The shield lock is released by squeezing the outboard sides together and that will then release it from the mount stud that is located in the center of the helmet. The reason for this is to "clean-up" the sides of the helmet where a side impact in a head containment seat may grab parts of the helmet. All Stilo ST5 shilds have the center release mechanism installed on it.All Stilo ST5 shields are treated with an anti-fog treatment and they do require special care. The best result we have by far is the Stilo Visor cleaner. Liberally spray the outside of the visor with the cleaner, and wipe in a single swipe with a micro fiber towel until clean and dry. If fingerprints or dirt remain, repeat as needed. A back and forth wiping motion will tend to leave lint from the rag on the visor, so the single pass works best. Repeat if necessary, but usually one pass works great.Stilo Visor Care: Do not use Windex or any glass cleaner containing ammonia, as this can harm the anti-scratch coating on the outside of the visor, and the anti-fog coating on the inside of the visor. This is the official Stilo Visor Cleaner.

Stilo ST5 Thin 2mil Perimeter Seal Tearoff Pack qty 30 (3 Sleeves of 10) Protect Your Stilo ST5 Helmet Shield From Rocks, Dirt, and Debris with these 2 mil thick tearoffs. Measuring 2 mil thickness (the most popular thickness for dirt track racers), it is intended for road racing and/or dirt track use. The perimeter seal system used in these tearoffs provides a tighter fit against the visor, blocking out dirt, dust, and water from getting between the visor and tearoff stack. This package of 2 mil tear-offs are in 3 stacks of 10 per package (30 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo ST5 2mm Perimeter Seal Tearoff Pack Quantity 30 (3 Sleeves of 10) Details: Manufacturer: Stilo Manufacturer part numbers:10259CP Thickness each: 2 mil Gradient: Clear Fits All Stilo ST5 Helmets: Yes Fits All Stilo ST4F and Stilo ST4W Helmets: No 3 Stacks of 10 tear-offs glued together Note: This is the thinner of tearoffs (2 mil) for your Stilo ST5 series helmets. It is used primarily in Dirt Track Racing where you need more pulls in a race

Stilo ST5 Carbon Peak Visors Introducing the Stilo ST5 8860 Carbon Peak, the perfect accessory to enhance your racing experience. Designed as an optional extra for FIA8860 ST5 helmets, this peak is FIA approved and offers both style and functionality on the track.  Similar to the bill of a ball cap, the ST5 Peak Visor by Stilo is effective at blocking the sunlight from your eyes. The peak visor can be adjusted to the angle of the sun throughout the day. Fitted for the SA2020 Stilo ST5 models, the ST5 peak is the perfect visor for keeping the sun out of your eyes.    Stilo ST5 Peak Visors Details: Manufacturer: Stilo Fits Stilo ST5: Yes Stilo SKU YA0862 Gloss Carbon Fiber (FIA 8859 weave) Stilo SKU YA0863 Gloss Carbon Fiber (FIA 8860 weave)

Stilo ST5 Thick 4mil Perimeter Seal Tearoff Pack qty 9 (3 Sleeves of 3) Protect Your Stilo ST5 Helmet Shield from rocks, dirt, and debris with these 4 mil thick tearoffs. Measuring 4 mil thickness (the most popular thickness for open cockpit and harsh environment racers), it is intended for road racing and/or dirt track use. The perimeter seal system used in these tearoffs provides a tighter fit against the visor, blocking out dirt, dust, and water from getting between the visor and tearoff stack. This package of 4 mil tear-offs are in 3 stacks of 3 per package (9 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo 4 mil Perimeter Seal Tearoff Pack Quantity 9 (3 Sleeves of 3) Details: Manufacturer: Stilo Manufacturer part numbers: 3459CP Thickness each: 4 mil Gradient: Clear Fits All Stilo ST5 Helmets: Yes Fits All Stilo ST4F and Stilo ST4W Helmets: No 3 Stacks of 3 each Note: This is the thicker of tearoffs (4 mil) for your Stilo ST5 series helmets. It is used primarily in Road Racing Open Cockpit or other harsh environment race tracks

Stilo ST5 Thin 2mil Tearoff Pack qty 30 (3 Sleeves of 10) Protect Your Stilo ST5 Helmet Shield From Rocks, Dirt, and Debris with these 2 mil thick tearoffs. Measuring 2 mil thickness (the most popular thickness for dirt track racers), it is intended for road racing and/or dirt track use. This package of 2 mil tear-offs are in 3 stacks of 10 per package (30 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo ST5 2mm Tearoff Pack Quantity 30 (3 Sleeves of 10) Details: Manufacturer: Stilo Manufacturer part numbers:10259C Thickness each: 2 mil Gradient: Clear Fits All Stilo ST5 Helmets: Yes Fits All Stilo ST4F and Stilo ST4W Helmets: No 3 Stacks of 10 tear-offs glued together Note: This is the thinner of tearoffs (2 mil) for your Stilo ST5 series helmets. It is used primarily in Dirt Track Racing where you need more pulls in a race

Racing Optics (X-Stack) - Impact Helmet Shields Racing Optics has the most optically advanced tear-off technology. 10 layer "distortion free" laminated tear-off system for many Impact helmets. Protect your Impact Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches. Racing Optics is a laminated tear-off solution for dirt and pavement forms of racing eliminating the need to apply individual tear-offs. Racing Optics has the most optically advanced tear-off technology. 10 layer "distortion free" laminated tear-off system for many Impact shields. Protect your Impact Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches. For racers who prefer thinner tear-offs, Racing Optics is available in X Stack (10 per stack) 2 mil with patterns specific to many Impact helmets. Each sleeve comes with three stacks of 10 Racing Optics. (total of 30) Racing Optics (X-Stack) - Impact Helmets Details: Qty in one stack: 10 Thickness: 2 mil Stacks in one package: 3 Post centers: 12 1/8" Shape: Banana Racing Optics (X-Stack) - Impact Helmets Fitment Guide: Bell RS7 Bell HP7 SKU: 10237C

Stilo Venti WRX Dirt Visor – See the Track Like Never Before When you’re hitting the track, you need crystal-clear vision, style that turns heads, and gear that’s as reliable as your ride. Enter the Stilo Venti WRX Dirt Visor, the ultimate upgrade for racers who take their performance (and their looks) seriously. Designed to meet the latest FIA homologation standards, this visor isn’t just an accessory – it’s your secret weapon for peak performance and style. Features & Benefits – Why You'll Love It Unparalleled Visibility:Equipped with an internal anti-fog treatment so advanced, even Mother Nature can’t compete. Rain? Fog? Heat? Bring it on – your visor stays crystal-clear in every condition. Vibrant Style:Choose from a range of tints and colors to make your helmet as bold or stealthy as your racing strategy. Match your team, car, or just your mood. Track-Ready Design:3mm thick for ultimate durability, this visor shrugs off debris and keeps you focused. Tear-off posts are pre-installed, so you’re ready to rip (literally). Secure and Convenient:A central locking clasp ensures effortless visor adjustments mid-race – because fumbling with your gear at 150mph isn’t an option. Universal Fit:Compatible with all ST5 racing helmets, and if you’re rocking an ST5 GT, pair it with the Visor Locking Pin Kit (sold separately) for max stability. Got an ABP helmet? We’ve got specialized visors for you too. All-Weather Options:Race in the cold or wet? Check out our double-glazed non-anti-fog options – no more battling fogged-up visors when conditions are against you. Product Specifications: Material: Durable 3mm polycarbonate Anti-Fog Coating: Yes (internal) Tear-Off Compatibility: Pre-installed posts Color Options: Vibrant tints available Fitment: ST5 helmets (ABP-specific visors sold separately) Additional Accessories: Optional locking pin kit for GT models FAQs – Your Questions, Answered Q: Will this fit my Stilo ST5 GT helmet?A: Absolutely! For extra security, we recommend pairing it with the ST5 Visor Locking Pin Kit. Q: Do you offer non-anti-fog options?A: Yes! Our double-glazed visors are perfect for cold or wet conditions. Q: How do I know if I need an ABP-specific visor?A: If you’re using an ABP helmet, look for visors labeled specifically for ABP compatibility to ensure a proper fit. Ready to Take the Lead? Don’t let your visor be the weak link in your racing setup. Upgrade to the Stilo Venti WRX Dirt Visor today and experience unparalleled clarity, style, and performance. Whether you’re chasing podiums or perfecting your lap times, this visor is your ultimate racing companion. Click "Add to Cart" now and make every turn, overtake, and finish-line photo count!

Bell SE07 3mm Helmet Shield | Fits RS7-K & KC7 Bell Racing SE07 Shield Fits These Helmets: Bell RS7-K (all) Bell KC7 (all) Bell SE07 3mm Helmet Shields are designed to handle the rigors of competition, giving you a clear view of the track ahead. Available in a variety of tints and colors, an SE07 shield also makes your Bell helmet stand out from a crowded field. Available with either an anti-fog coating or a true Double-Screen Anti-Fog (DSAF) interior fog-free lens. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. Tear-offs are sold separately. Bell SE07 Helmet Shield Tint Colors Clear (no tint) Light Smoke Dark Smoke Yellow Silver Mirror Blue Mirror Rainbow Iridium Mirror Multi-Layer Blue Multi-Layer Red

Stilo ST5 Helmet Visors Colorful Anti-Fog/Anti-Scratch Shields For Your Stilo Helmet These Stilo visors are a great way to add some color to your racing life! Stilo offers a wide variety of shield options including many popular iridium colors. All Stilo shields have an anti-fog and anti-scratch coating and are made for a perfect fit on your Stilo ST5 helmet (both the GT and N "naked" versions). A Note on Cleaning Anti-Fog/Anti-Scratch Shield Anti-scratch/anti-fog shields require special care in order to preserve the coatings on the inside of the shield. Only use Acrysol Shield Cleaner to clean your shield, inside and out. Do not use glass cleaner containing ammonia (like Windex) as this can harm both the anti-scratch coating on the outside of the visor and the anti-fog coating on the inside. In a pinch, you're better off using water and a clean microfiber cloth to gently clean your Stilo shield.

Sparco Helmet Shields (Stealth RF) The Sparco Helmet Shields (Stealth RF) are designed to give you optimal clarity, visibility, and protection on track. Engineered from high-grade optical materials, these visors ensure minimal distortion while offering advanced anti-fog and anti-scratch coatings. Whether you’re running under blazing sun or in evening sessions, the Stealth RF shield keeps your vision sharp and your focus locked on the apex. High-Performance Clarity for Racing Precision Developed for Sparco’s premium racing helmet lineup, the Stealth RF visor delivers exceptional light management and UV defense. It’s built to handle everything from bright daylight to low-light endurance conditions, ensuring peak optical performance in all environments. The aerodynamic curvature minimizes wind resistance while maintaining a sleek, professional look for serious racers. Features • Compatible with Sparco full-face helmets (RF series)• Optically correct for distortion-free vision• Advanced anti-fog and anti-scratch coatings• UV-resistant for maximum eye protection• Available in multiple tints for varying light conditions• Easy tool-free installation and replacement• Lightweight and impact-resistant construction Sparco Helmet Shields (Stealth RF) FAQs: Are these shields compatible with all Sparco helmets? The Stealth RF shields are specifically designed for Sparco RF-series helmets, ensuring a perfect fit and seal. Do the STEALTH RF shields come in different tints? Yes. They’re available in clear, light smoke, dark smoke, mirrored, and iridium finishes for various lighting conditions. How do I clean my Sparco helmet shield? Use mild soap and water with a microfiber cloth. Avoid harsh cleaners that can damage the anti-fog coating. Can I use this shield for night racing? Absolutely. The clear or light smoke variants are ideal for low-light or night track sessions. Does this shield fit older Sparco models? It’s compatible with most recent RF-series helmets but not older GP or WTX models. Check your helmet’s model number before purchasing. Upgrade your vision and protection with the Sparco Helmet Shields (Stealth RF) — engineered for racers who demand uncompromising clarity and performance on every lap.

Stilo ST5 Helmet Visors (For Anti-Ballistic ABP Helmets Only) Colorful Anti-Fog/Anti-Scratch Shields for Your Stilo ST5 These Stilo visors are a great way to add some color to your racing life! Stilo offers a wide variety of shield options including many popular iridium colors. All Stilo shields have an anti-fog and anti-scratch coating and are made for a perfect fit on your Stilo ST5 FN Carbon Fiber ABP helmet only A Note on Cleaning Anti-Fog/Anti-Scratch Shield Anti-scratch/anti-fog shields require special care in order to preserve the coatings on the inside of the shield. Only use Acrysol Shield Cleaner to clean your shield, inside and out. Do not use glass cleaner containing ammonia (like Windex) as this can harm both the anti-scratch coating on the outside of the visor and the anti-fog coating on the inside. In a pinch, you're better off using water and a clean microfiber cloth to gently clean your Stilo shield.  

Racing Optics (X-Stack) 2mm Laminated Tearoffs X-Stack™ 10 (Clear) for Stilo ST6 The XStack™ 10 is a stack of 10 laminated Tearoffs that are 2 mil thick each. The laminated technology creates a distortion-free optical lens. Each package contains 3 stacks of 10 Tearoffs for a total of 30 Tearoffs. Clear. 10265C Fits: Stilo ST6

Arai GPV-R Helmet Shields Fresh Vision for Your Arai A scratched, pitted, or beat-up shield has no business getting between you and the next braking zone. Arai GPV-R Helmet Shields are the correct replacement shields for Arai GPV-R and SKV-R helmets, restoring the crisp, unobstructed visibility you expect from an Arai. Available in Clear, Semi-Tint, and Dark Tint, you can choose the right shield for the conditions—or keep a couple in your gear bag so you're ready when the weather and light change. Choose Your Arai GPV-R Shield Clear The most versatile option and the one you'll want when maximum light transmission matters. Clear is ideal for overcast conditions, low-light sessions, night racing, endurance events, or simply as an all-purpose shield. Semi-Tint A great middle ground for racers who want some glare reduction without going all the way to a dark shield. Semi-Tint works especially well for variable conditions, partly cloudy days, and sessions that may run from bright sunlight into lower light. Dark Tint Made for bright, sunny track days when glare can become a distraction. Dark Tint reduces incoming light and gives your helmet that unmistakable race-ready look while keeping your eyes more comfortable in bright conditions. Arai GPV-R Helmet Shield Details Fits Arai GPV-R auto racing helmets Fits Arai SKV-R karting helmets Available in Clear, Semi-Tint, and Dark Tint Direct replacement for scratched, damaged, or worn shields Excellent spare to keep in your helmet or track gear bag Designed for proper fit and operation with compatible Arai helmets Be Ready for Changing Conditions Track conditions don't stay the same all day. Bright morning sun can turn into cloud cover—or an endurance race can carry you straight into darkness. Keeping more than one shield in your gear bag makes it easy to match your visibility to the conditions instead of being stuck behind the wrong tint. Important Installation Note Do not remove the latch from the shield. Removing the latch may affect shield operation and proper fitment. Install the shield according to Arai instructions and verify smooth, secure operation before heading onto the track.

Schuberth EVO SDL High Contrast Visors For SP1/SK1 The Schuberth EVO SDL High Contrast Visors are designed for the new SP1 Carbon Evo and SK1 Carbon Evo helmets. These dual-locking shields use Schuberth’s SDL system to improve both safety and ventilation while delivering the sharper color separation of High Contrast lens technology. High Contrast visibility with Schuberth’s dual-locking SDL system Schuberth’s High Contrast visor technology is built to improve visual clarity by helping separate overlapping color wavelengths, making track details, braking markers, and surrounding traffic easier to read at speed. The SDL locking system retains a two-stage opening design: the first stage allows a small amount of airflow while the visor stays securely locked, and the second stage creates a firm seal to help keep out fine dust. Features Designed for the new Schuberth SP1 Carbon Evo and SK1 Carbon Evo helmets Will not fit outgoing SP1 or SK1 helmet models Injected visor construction derived from Schuberth F1 expertise High Contrast lens technology improves sharpness, color definition, and vibrancy SDL dual-locking system supports secure airflow and a tighter sealed position Available in clear, mirrored, smoke, and rain-focused High Contrast options Rain visor includes adhesive fog-resistant lens, rubber trim, clear tear-off buttons, and clear locking lever Available Visor Colors Clear Clear Red Clear Blue Light Red Dark Red Light Blue Clear Rain Schuberth EVO SDL High Contrast Visors FAQs: Which helmets do these visors fit? These High Contrast Dual Locking Visors are made for the new Schuberth SP1 Carbon Evo and SK1 Carbon Evo helmets. Will these fit the older SP1 or SK1 helmets? No. HMS specifically notes that these dual-locking EVO SDL visors do not fit outgoing SP1 or SK1 helmet models. What does High Contrast visor technology do? It helps isolate color wavelengths more effectively, increasing sharpness and visual clarity so drivers can identify track details faster. How does the SDL dual-locking system work? The first stage permits limited airflow while the visor remains locked, while the second stage creates a more secure seal that helps reduce dust intrusion. What is different about the Clear Rain visor? The Rain visor is equipped with an adhesive fog-resistant lens, rubber trim, clear tear-off buttons, and a clear locking lever for wet-weather use. Choose the Schuberth EVO SDL High Contrast visor that best matches your visibility needs and complete your SP1 Carbon Evo or SK1 Carbon Evo helmet setup.

Schuberth Visors For SF4/SP1/SK1 with Legacy Latch These Schuberth Visors for SF4, SP1, and SK1 helmets are 3mm thick, 3D-injected replacement shields developed from Schuberth’s top-level motorsport experience. Available in twelve color and finish options, these legacy-latch visors let drivers tailor visibility for clear daylight, changing light, wet-weather use, or a more aggressive mirrored race look. Premium Replacement Visors Each standard visor is equipped with a Pinlock 120 fog-resistant lens, clear tear-off buttons, and a clear locking lever. The Clear Rain version uses an adhesive fog-resistant lens instead. Every visor also includes a soft visor pouch to help protect the lens when it is not mounted on the helmet. Features Fits Schuberth SF4, SP1, and SK1 helmets with the legacy latch visor system 3mm thick, 3D-injected visor construction Developed from Schuberth motorsport and F1 expertise Twelve visor color and coating options available Standard visors include Pinlock 120 fog-resistant lens Standard visors include clear tear-off buttons and clear locking lever Clear Rain visor uses an adhesive fog-resistant lens Soft visor pouch included with each visor Available Visor Colors Clear Clear Red Clear Blue Clear Silver Light Red Dark Red Light Blue Dark Blue Light Smoke Dark Smoke Clear Rain Light Silver Schuberth Visor FAQs: Which Schuberth helmets do these visors fit? These visors are listed for Schuberth SF4, SP1, and SK1 helmets using the legacy latch visor system. Do the visors include anti-fog protection? Yes. Standard visor options include a Pinlock 120 fog-resistant lens. The Clear Rain visor instead uses an adhesive fog-resistant lens. Are tear-off buttons included? Yes. HMS specifies clear tear-off buttons and a clear locking lever on the standard visor versions. What is the difference between the Clear Rain visor and the standard Clear visor? The Clear Rain visor is built for wet-weather use and uses an adhesive fog-resistant lens, while the standard clear visor uses the Pinlock 120 setup. Does each visor come with storage protection? Yes. Each visor includes a soft visor pouch to help protect it when not in use. Refresh your Schuberth helmet with a visor color and tint that matches your race-day visibility needs.