New products

A2-032 Girodisc 2pc REAR Brake Rotors (OEM PCCB) The Girodisc system is an upgrade to a 350mm two-piece steel rotor and aluminum hat combination, a direct replacement for the OEM PCCB brake discs. The two-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance iron replacements, you can eliminate the risk of cracking or breaking your expensive PCCB rotors at the race track. When used with Pagid or PFC performance brake pads and RF1 racing brake fluid (also available from ), you have an amazing solution to overheating, cracking rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured in the USA from cast iron, made to the same specification and with the same material used by professional racing organizations. The rotor's curved-vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from braking while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise typically associated with floating rotors. The two-piece Girodisc design allows for rotor-ring only replacement to minimize future replacement costs. Priced per pair Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

A1-203 Girodisc 2pc Front Brake Rotors for Porsche 718 S, 991.2, 992 (350mm) FITMENT: Porsche Cayman S & GTS (718) 2.5L, Front Porsche Boxster S & GTS (718) 2.5L, Front Porsche 991.2 Carrera, Front Porsche 992 Carrera, Front The Girodisc system is a direct replacement for the OEM Porsche front rotors on your Cayman S, Boxster S, or GTS (718). Using the provided billet aluminum caliper spacers and bolts, these 20mm larger rotors will work perfectly with your OEM front brake calipers. The Girodisc rotors are larger than the OEM rotors at 350mm versus 330mm, providing marked increase in braking force, stopping power, and cooling capacity. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads and CMS RF-1 brake fluid (available from ), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

A1-032 Girodisc 2pc Front Brake Rotors (OEM PCCB) FITS THE FOLLOWING CARS: Porsche 981 Boxster/Cayman (w/ OEM PCCB) Porsche 991 Carrera (w/ OEM PCCB) is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or next business day to ensure we meet your delivery deadline. This Girodisc system upgrades your Porsche 981 or 991 equipped with factory PCCB brakes to a 350mm two-piece steel disc and aluminum hat. This two-piece floating rotor design will bolt directly to your Porsche front and work flawlessly with the OEM calipers. Upgrading your brakes to lightweight, high-performance Girodisc rotors, you maintain the factory brake bias and ABS effectiveness. Girodisc rotors maintain the low rotational and unsprung mass of your PCCB rotors while being far more durable -- particularly when swapping wheels on and off at the race track. Combined with Pagid or PFC performance brake pads and RF-1 racing brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked, warped rotors that result from high-performance driving. The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc. The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors. This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs. Sold/priced per pair. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

AiM Sports KA 50 psi Boost/Vacuum (Absolute Pressure) Sensor This "absolute pressure" sensor is ideal for measuring vapor (gas) pressures, such as intake boost and crankcase pressure. The 50 psi pressure range is based on perfect vacuum (i.e., from 15 psi below atmospheric pressure to 35 psi above). This sensor is marked "0-50psiA" to differentiate it from the standard 0-50 psi sensor (marked "0-50psiSG"), which does not measure vacuum. KA pressure sensors are more robust than VDO-style pressure sensors, but they should still be isolated from engine heat and vibration whenever possible. Features 1/8" NPT male threads.Kart  The AiM KA 50 is compatible with these AiM products: MyChron5 MXL MXL 2 MXG MXS MXM EVO3 EVO4

Stilo Cheek Pads Replacement cheek pads for Stilo ST5 / ST5.1 helmets help you customize your helmet to provide the perfect fit!

Stilo Helmet Hydration Kit Upgrade your racing experience with the Stilo Hydration Kit, designed to keep you hydrated during intense competitions. Designed specifically for Stilo ST5 and ST6 helmets, this kit includes three essential components: the Bite Valve (YA0601), Silicone Tubing (YA0602), and Straight Male Coupling End (YA0603).1 Engineered to seamlessly integrate into the helmet and run behind the cheek pad, the quick-release connector allows for easy attachment to a variety of drink devices found on the market. Whether you're driving the ST5/ST6 FN or GT model, this hydration system ensures convenient access to refreshment without compromising performance. With the ability to fit snugly into the ST5/ST6 GT side ports or front vent of the ST5 FN helmet, this kit offers versatility and comfort. Stay focused on the track while staying hydrated with the Stilo Hydration Kit. Stilo Helmet Hydration Kit Includes (1) Male hydration connector (YA0603) (1) Hydration tube (YA0602) (1) Bite valve (YA0601) 1 Note: YA0604 female hydration connector is sold separately.

Garmin Catalyst Driving Performance Optimizer The Garmin Catalyst Driving Performance Optimizer is a robust driver data and video system aimed at making driver improvement easier than ever before. Garmin has been the leader in GPS-based active sport recording for decades, and they've taken that experience and expertise and crossed it over into the automotive performance data field with the Garmin Catalyst Driving Performance Optimizer. GARMIN CATALYST DRIVING PERFORMANCE OPTIMIZER DETAILS Manufacturer: Garmin Manufacturer part no: 010-02345-00 Dimensions: 7.8" x 4.8" x 0.9" Display size: 6.0" x 3.5" Touch screen: yes Weight: 15 oz. Battery: rechargeable lithium-ion Battery life: up to 2 hours Internal memory: 16GB Expandable memory: up to 256GB via dual SD card slots Includes one 32GB MicroSD card Includes mount: yes GPS: yes GLONASS: yes 10Hz multi-GNSS positioning: yes Garmin Connect compatible: yes Remote camera: yes Camera resolution: 1080p Camera field-of-view: 140º Camera frame rate: 30 fps Software & track database updates included Bluetooth connectivity: yes DISCOVER YOUR FULL TRACK DRIVING POTENTIAL This device is an industry-first, providing virtual coaching in real time and showing a calculated optimal lap. Real time coaching tells you how to go faster in each corner, with audio instructions, so you can keep your eyes up at all times. This is a stark contrast to existing systems which only provide feedback after a corner or after your session. The Catalyst uses your measured optimal lap to guide you to your personal maximum performance, rather than the performance of a professional racing driver. Overview Garmin Catalyst uses accelerometers, GPS, video, and the most sophisticated algorithms to evaluate your driving performance and then suggest ways to improve (just like a human coach). Through the display and audio, Catalyst provides a real-time assessment of performance using both gentle suggestions and positive reinforcement. No, it won't clap when you get it right but it does use real-world phrases and encouragement - such as "brake less", "apex later", or "keep pushing". Catalyst is perpetually evaluating and assessing your performance so it can optimize your lap and get you in line. After your session, review track maps showing opportunities for improvement as well as "heat map" displays of deceleration, acceleration, apexes, and speeds. Display & Audio Catalyst uses a 6.95" super wide view LCD IPS screen with vivid TFT colors. The LCD is a touchscreen, able to control functions without the need for a remote control, app, or a laptop. Coaching or playback audio is available via 3.5mm headphone jack or Bluetooth(TM) to your headset or car stereo. The on-screen layout is not programmable.CameraThis is more than just a camera - the remote pod includes the accelerometers. It records up to 30fps in 1080p HD in a 140 field-of-view. It must be mounted facing forward, high up, and centered on your windshield. An on-screen guide will help you align it. The camera contains the accelerometers and very powerful processing software integrates the video into Catalyst's coaching and data. Playback is available on the Catalyst screen with speed and lap times already in sync. Coaching To unlock all of the coaching features and data you will need to select the Advanced setting. There is also a Basic setting that does not provide as much feedback. During your session, the real-time display is referencing current session data only. However, post-session review can include data from multiple sessions. Catalyst is looking for patterns in your driving to map out where you were fast and opportunities to try a different line, brake less, or carry more speed. The only voice currently available is a Siri-like female voice. Lap time differential is displayed as either red (slower), green (faster), or black (no change). From a student/novice perspective you may want to have an advanced driver/instructor set baselines in your car first. Then overlay that data with your own driving. This way Catalyst can see the full potential and make recommendations. It's important not to "chase" a lap time but to know what is capable and make incremental improvements to get there. Catalyst will never make a recommendation that hasn't been previously successful. Analysis & Review Catalyst compiles all of its data to form a True Optimal Lap. This is your best possible lap using all of the data you provided in your sessions. True Optimal Lap is determined not just by lap and sector times but by analyzing your best lines through corners and sectors and using the camera feed to identify track limits. Catalyst retains your track data over a 4-day period so you can pack in a full weekend of driving with progressive coaching and analysis. Post-session data is reviewed through the screen or through the Garmin Connect(TM) smartphone app, including video. Export of data or video files to a laptop is not currently supported nor is it needed. Everything you need is self-contained in the tablet. Catalyst works best when used as a standalone tool to review performance and make adjustments while at the track. Garmin Catalyst Performance Features Tracks Your Racing Line Real-Time Audio Cues/Coaching True Optimal Lap w/ Video Built-In Accelerometers Displays Best Lap Time Displays Adaptive Delta Time Displays Lap Count & Total Session Time Preloaded Global Track Database Session Comparisons Driving Performance Scores Automatically Identifies Areas of Biggest Time Gain Supports Multiple Users & Multiple Cars Stores History of On-Track Performance Current Weather Plus Forecast via Wi-Fi Segment Analysis (racing line, speed, & accel/decel) In the Box with your Garmin Catalyst Garmin Catalyst 32GB microSD pre-installed in covered compartment (auxiliary card slot on the side of the Catalyst device is externally accessible for memory expansion) Remote Cam with polarized lens cover Remote Cam 3.5 meter cable Heavy-duty vehicle suction cup Powered magnetic mount Two 1” connecting arms 1” arm connector Cable clips 12V socket power cable Documentation Included Accessories with your Garmin Catalyst One-inch ball adapter screw down mount USB data cable 12V bare wire vehicle power cable Additional Remote Cam adhesive Continue reading to see how and why the Garmin Catalyst Driving Performance Optimizer is unlike anything you've ever experienced. Heck... it's unlike anything you've ever even thought possible!

Sparco Pit Stop Crew Shoes The Sparco Pit Stop shoe was designed specifically for pit crew use but it can also be used for racing where a durable and thicker sole is preferred such as off-road. The Pit Stop shoe is SFI approved for racing or “over the wall” crew use. The Pit Stop has a suede upper with a perforated tongue and heel for added breathability and it has leather panels on the toe box and heel for extra durability. The anti-static, fuel- and oil-resistant rubber sole was designed for maximum grip, with a toe cap designed to protect the toe area when in the kneeling position. Internal lace system to help protect from snagging. The Pit Stop has an extra padded collar area with a Velcro closure which gives extra support. The internal foot bed has a special cushioned insole that gives maximum comfort. The Sparco Pit Stop shoe is available in black in US sizes 7-1/2 to 15. FEATURES & TECHNOLOGY Padded collar and adjustable strap Pre-shaped anatomic insole Perforated breathable upper Anti-static, fuel- and oil-resistant sole Internal lacing system SFI 3.3/5 approved

Alpinestars Youth Neck Support Alpinestars Youth Neck Support is optimized for track-day performance with reliable cooling, lightweight construction, and race-ready durability. Kart Racing Neck Brace for Young Champions Protect your young driver like the pros. The Alpinestars Youth Neck Support delivers premium head and neck protection for karting’s next generation. Whether your child is chasing victory at local kart tracks or gaining seat time in race go karts, this karting brace is engineered to reduce the risk of serious neck injuries by minimizing helmet roll and sudden impact forces. Designed for junior racers, it offers the same commitment to safety, performance, and comfort trusted by world-class athletes—scaled for youth-sized competitors. Crafted with lightweight, high-density foam and ergonomic shaping, this Kart Racing neck support ensures consistent comfort and freedom of movement during long stints behind the wheel. The easy-to-use rear fastener and compatibility with most karting suits and helmets make it ideal for serious kart racing. From weekend warriors to rising stars, give your young driver the confidence to push harder, knowing they’re protected by a brand synonymous with motorsport excellence. Highlights Lightweight karting neck brace for junior drivers with ergonomic, race-ready fit Designed to reduce axial load and rotational forces in kart crashes Durable high-density core foam with soft liner for comfort and sweat absorption Compatible with most youth karting helmets and suits Alpinestars Youth Neck Support give kart racers the grip, response, and comfort they need to perform at their best. Built to handle the rigors of competition, they deliver control and style in every lap. Features New compact and easy to use lightweight neck protection to fit kids from 8 to 14 yrs. Ergonomic designed and engineered shape for perfect fitment and engagement with A-5s and Youth Bionic Action Jacket Left and right rigid frames made from a polymer compound in combination with the internal smooth edged soft injected EVA provide a perfect fit and stable positioning. Overall frame construction dissipates energy loads by transmitting them across the back. Flexible back connector between the left and the right frames allows the Neck Support to follow the body movement when riding.

Forgeline Track Package For McLaren 19" FRONTS AND 20" REARS We've sold hundreds of Forgeline Motorsport Series wheels to customers taking their supercars to the next level, both on the street and at the track. From this experience, we have optimized wheel sizes, offsets, brake and fender clearance, tire sizes, etc., so you get the pinnacle of forged-wheel performance and a customized look while taking the guesswork out of getting everything right. Forgeline's GS1R and GTD1 are the two most popular designs with our McLaren customers, but if you have another Forgeline style in mind give our wheel experts a call at 888-748-7223 and we'll customize a package to your needs. Whether you're upgrading to R-compound street tires, or moving up to Hoosier's incredible R7 track-day tires, we have you covered! Choose your wheel style, select your color, add TPMS and tires if you like, and we'll get your custom Forgeline package started*. It's that easy! BASE PRICES INCLUDE: Two front 19-inch and two rear 20-inch Forgeline wheels, optimized for your McLaren, finished in any standard color, and shipped to your door. ("McLaren" logo machined aluminum center caps are optional.) CALL ANYTIME Of course, if you prefer to talk to one of our Forgeline specialists about options, specs, or with any question you have, just give us a call at 888-748-7223 and we'll help you make the perfect choice! FORGELINE GS1R FOR MCLAREN Originally designed for professional racing teams competing in the IMSA Continental Tire SportsCar Challenge Grand Sport (GS) class, the Forgeline GS1R exemplifies the latest in advanced wheel technology, including one-piece forged monoblock construction, motorsport engineered design, and I-beamed spokes. It's engineered to withstand the rigors of top-level endurance racing with a 2100 lb. street tire load rating and exceptional deflection stiffness. The GS1R features an open-lug center area for up to a pound in additional weight reduction and improved access to the lugs. Combined with a chamfered outer lip, this enables faster wheel changes. FORGELINE GTD1 FOR MCLAREN The Forgeline GTD1 five-lug is a 10-spoke derivative of Forgeline's race-winning centerlock GTD1 wheel. This wheel features the latest in advanced wheel technology, including one-piece forged monoblock construction, motorsport engineered design, I-beamed spokes and channelled spoke spans. The GTD1 is engineered to withstand the rigors of top-level endurance racing, delivering uncompromised strength and exceptional deflection stiffness. Made from the same forgings and similar design as Forgeline's centerlock GTD1, the GTD1 five-lug wheel has been re-engineered with 10 spokes and features an open lug center to reduce mass and enable easy access to your lug nuts. The GTD1 five-lug is machined from a single forging of 6061-T6 aluminum. And just like any Forgeline wheel, it is available with fully customizable finish options.   * Forgeline Competition Series wheels are custom made to order. Lead time is typically three to five weeks from order to shipment.  

Forgeline Track Package For McLaren We Make Buying Forgelines Easy and Save You Over $1,000 We've sold hundreds of Forgeline Motorsport Series wheels to customers taking their supercars to the next level, both on the street and at the track. From this experience, we have optimized wheel sizes, offsets, brake and fender clearance, tire sizes, etc., so you get the pinnacle of forged-wheel performance and a customized look while taking the guesswork out of getting everything right. Forgeline's GS1R and GTD1 are the two most popular designs with our McLaren customers, but if you have another Forgeline style in mind give our wheel experts a call at 888-748-7223 and we'll customize a package to your needs. Whether you're upgrading to R-compound street tires or moving up to Hoosier's incredible R7 track-day tires, we have you covered! Choose your wheel style, select your color, add TPMS and tires if you like, and we'll get your custom Forgeline package started*. It's that easy! BASE PRICES INCLUDE: Two front 19-inch and two rear 19-inch Forgeline wheels, optimized for your McLaren, finished in any standard color, and shipped to your door. ("McLaren" logo machined aluminum center caps are optional.) CALL ANYTIME Of course, if you prefer to talk to one of our Forgeline specialists about wheel options & specs, tire selection, or any other question you have, give us a call at 888-748-7223 and we'll help you make a well-informed choice! FORGELINE GS1R FOR MCLAREN Originally designed for professional racing teams competing in the IMSA Continental Tire SportsCar Challenge Grand Sport (GS) class, the Forgeline GS1R exemplifies the latest in advanced wheel technology, including one-piece forged monoblock construction, motorsport engineered design, and I-beamed spokes. It's engineered to withstand the rigors of top-level endurance racing with a 2100 lb. street tire load rating and exceptional deflection stiffness. The GS1R features an open-lug center area for up to a pound in additional weight reduction and improved access to the lugs. Combined with a chamfered outer lip, this enables faster wheel changes. FORGELINE GTD1 FOR MCLAREN The Forgeline GTD1 five-lug is a 10-spoke derivative of Forgeline's race-winning centerlock GTD1 wheel. This wheel features the latest in advanced wheel technology, including one-piece forged monoblock construction, motorsport engineered design, I-beamed spokes and channelled spoke spans. The GTD1 is engineered to withstand the rigors of top-level endurance racing, delivering uncompromised strength and exceptional deflection stiffness. Made from the same forgings and similar design as Forgeline's centerlock GTD1, the GTD1 five-lug wheel has been re-engineered with 10 spokes and features an open lug center to reduce mass and enable easy access to your lug nuts. The GTD1 five-lug is machined from a single forging of 6061-T6 aluminum. And just like any Forgeline wheel, it is available with fully customizable finish options.   * Forgeline Motorsport Series wheels are custom made to order. Lead time is typically three to five weeks from order to shipment.  

Replacement Rotor Rings (Does Not Include Hats) FITMENT (FRONT): Audi 8S TTRS (2014-Present) Discovery Parts is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products same or next business day to ensure we meet your delivery deadline. These rotor rings include all necessary hardware to install on your original Girodisc aluminum hats (do not re-use the old hardware). Sold/priced per pair.

HJC H70 Top Air Auto Racing Helmet   Whether you're navigating the sand dunes of Baja or on the bank turns of the Nurburgring, HJC Motorsports has you covered with the release of its most versatile helmet to date: the all-new H70. Designed with a straightforward approach, the HJC H70 is at home in nearly any driving conditions with the help of a few key attachments already in the box: a rear spoiler for open-cockpit driving and a top forced-air kit for vehicles outfitted with filtered air systems. Complete with factory installed M6 terminals for your favorite head and neck restraint, the HJC H70 helmet will have you ready to take on your favorite race track anywhere in the world. HJC H70 TOP AIR HELMET FEATURES: Snell SA2020 and FIA 8859-2015 approved Advanced Fiberglass Composite Shell (with two shell sizes, XS-M and L-XXL) Advanced Air Circulation System: two front intakes and eight top vents Fire resistant moisture-wicking removable and washable cheek pads and head liner Polycarbonate anti-fog shield with tear-off posts Double D-ring retention system Pre-installed M6 terminals for head and neck restraints Optional shields available: Amber, Dark Smoke, Dark Blue, Fire Red, and Black Chrome Sizes: XS - XXL HJC H70 TOP AIR INCLUDED ACCESSORIES: Vent Plugs (8 pcs) Lower Vent Cover Top Forced Air Rear Spoiler  

Stilo Carbon Curva Kart Rib Protector Ultra-Light Carbon Rib Protection for Serious Kart Racers The Stilo Carbon Karting Curva Rib Protector is designed for kart racers seeking exceptional protection, comfort, and freedom of movement. Utilizing Stilo's patented Carbon Curva technology, it combines rigid carbon fiber protection with strategically engineered flexibility to create a rib protector that conforms naturally to the driver's body while providing outstanding impact protection. Unlike traditional rigid rib protectors, the Carbon Curva's anatomical design minimizes movement during driving, improving both comfort and protection. Its ultra-lightweight carbon fiber construction reduces fatigue during long race weekends, while the adjustable shoulder and waist straps provide a secure, personalized fit. Available in Small, Medium, and Large sizes, the Carbon Curva is an excellent choice for competitive kart racers looking for premium protection without unnecessary bulk. Stilo Carbon Curva Kart Rib Protector Features Patented Carbon Curva technology for exceptional fit and comfort Ultra-lightweight carbon fiber construction Anatomically curved design minimizes movement while driving Excellent rib protection with outstanding driver mobility Adjustable shoulder and waist straps for a secure, customized fit Available in Small, Medium, and Large sizes Designed specifically for sprint, shifter, and endurance kart racing Stilo Carbon Curva Rib Protector Size Chart Frequently Asked Questions Is the Stilo Carbon Curva FIA 8870-2018 homologated?No. The standard Carbon Curva Rib Protector is not FIA 8870-2018 certified. Drivers requiring FIA 8870-2018 homologation should choose the Stilo Carbon Curva 8870 Rib Protector. What makes the Carbon Curva different from traditional rib protectors?Its patented Carbon Curva construction combines lightweight carbon fiber protection with engineered flexibility, creating a more anatomical fit that improves comfort while reducing movement inside the protector. Who is the Carbon Curva designed for?The Carbon Curva is ideal for club racers, national competitors, and serious karting enthusiasts looking for premium lightweight rib protection. Can junior drivers wear the Carbon Curva?Yes. With multiple size options available, many younger drivers can achieve an excellent fit. Always consult the official sizing chart before purchasing. Will it fit under a modern kart suit?Yes. Its low-profile ergonomic design fits comfortably beneath virtually all modern karting suits while allowing excellent freedom of movement. How does it compare to the Carbon Curva 8870?The Carbon Curva shares the same focus on lightweight comfort and ergonomic fit, while the Carbon Curva 8870 adds FIA 8870-2018 homologation for competition where that certification is required.

Arai GP-7 Anti-Fog Helmet Shields Available in a variety of colors and tints, these replacement shields fit all versions of the Arai GP-7 SA2020 helmet.   The GP-7 series actually fits two different Arai helmet models. The GP-7, and of course the Arai every auto racer wants, the Arai GP-7SRC. All Arai shields we offer at DiscoveryParts.com are Genuine Arai in standard, Anti-Fog, Dual Pane, and with the Arai Visor Tint Strip ontop You know how well your helmet was crafted when it was built and the same care and exacting standards are used in your new Arai GP-7 shields.

Arai GP-7 SA2020 Auto Racing Helmet Racers, you’ve heard tales whispered in the pits, haven’t you? About that one helmet, the game-changer, the track day’s pièce de résistance? Enter the Arai GP7. This isn't just any auto racing helmet – it's like strapping a penthouse suite onto your noggin. With features so slick, it's like Arai peeked into our racetrack dreams! Born from racing DNA, the GP-7 comes fully loaded with Arai’s super-secret PBcLc (no, it's not a misplaced bingo callout, it stands for Peripherally Belted Complex Laminate!) shell construction. Yes, folks, that's the same stellar shell shape flaunted by the Formula 1 grade GP-7SRC model. Feel that? It's the sensation of your racing cred skyrocketing. And while we're on the topic of field of view, the wider eye port is an absolute game-changer, optimizing your peripheral vision. It's kinda like giving your eyes their own luxury box seats at the Grand Prix. Plus, the upgraded ventilation doesn’t just whisper cool breezes – it belts out Arctic gales. Those cheek pads? Like laying your face on a cloud that went to finishing school. And we've got three robust intake vents paired with two exhaust behemoths to ensure you’re the coolest cat on the track. Here's a sweet nugget for the safety-conscious speed demons out there: the ARAI GP-7 is all prepped with that glorious Snell SA2020 certification and comes factory-installed with M6 washers/nuts, ready for you to attach your Head and Neck Restraint system using a 6mm bolt. Plus, there’s that fancy FIA-8859-2015 certification sticker on the interior liner – it's like a little nod from the big leagues saying, "You've got this!" So, are you ready to elevate your racing experience and give your head the luxury treatment it deserves? Maybe it's time to stop flirting with the idea and seal the deal. Shift into gear, hit ‘Add to Cart’, and let the Arai GP-7 be the wingman your head's always dreamed of!  A driver favorite, the Arai GP-7 SA2020 helmet combines the most popular Arai features with new, improved upgrades. The GP-7 is constructed with Arai own PBcLc (Peripherally Belted Complex Laminate) shell construction and the same shell shape as the Formula 1 grade GP-7SRC model. New ventilation, a soft EPS liner, and a wider eye port for optimized peripheral vision are part of this new shell which gives the driver notable strength and flexibility. Replaceable cheek pads make racing comfortable for any driver, as do the three larger, closeable intake vents and two larger exhaust vents on the ventilation system. The ARAI GP-7 helmet is Snell SA2020 certified with factory-installed M6 washers/nuts. Drivers of any skill level can install their own Head and Neck Restraint system using a 6mm bolt. The FIA-8859-2015 certification sticker is applied to the interior liner of the helmet. POSITIVE SHIELD LATCH Simple yet effective, the positive latch mechanism on the GP-7 SA2020 helmet gives the driver solid shield latching, but is seamlessly integrated into the standard shield system for ease of use. NEW SHIELD PIVOT HARDWARE The GP-7 SA2020 features new shield pivot hardware with improved aerodynamics based on the updated track slider design. An increased peripheral field of view is featured on the 6 series, which surpasses the 5 series in visibility. The wider eye port, shield, and pivot hardware were all developed on the RC and adapted to the GP-7 SA2020 helmet. VENTILATION Increased airflow is key to the GP-7 SA2020 helmet design. This includes bigger, closeable intake vents with large 10mm holes in both front and rear. Larger rear vents also provide better airflow. M6 ANCHORS Drivers of all skill levels will appreciate the integrated, pre-installed M6 threaded washer/nut with 6mm threads which accepts a range of Head and Neck Restraint devices. A flat surface area around the mounting nut will let the anchor post base to rest flush along the surface of the helmet and around the full perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material. NEW CHINBAR The GP-7 SA2020 new, ergonomic chinbar and ridge at the bottom edge of the shell lowers the center of gravity and increases the structural integrity of the helmet. Additional improvements include a rise in the shell above the shoulders for increased clearance. EJECT READY CROWN PAD Arai's optional Eject system can be easily accommodated via a pre-cut pocket under the helmet crown pad. An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements to make sure you have the largest one. The ARAI GP-7 helmet will ship to you with signature required for delivery. ARAI GP-7 AUTO RACING HELMET FREQUENTLY ASKED QUESTIONS (FAQ): Remember that safety is paramount in auto racing, and choosing the right helmet and maintaining it properly is essential for your protection on the track. Always consult with the professionals at Discovery Parts and refer to the manufacturer's guidelines for specific questions about your racing helmet. Why do I need a racing helmet? Auto racing helmets are designed to protect drivers from head injuries and fire during high-speed races and crashes. They are a crucial safety component in motorsports. How do I choose the right size Arai GP-7 Auto Racing helmet? You should measure your head's circumference using a flexible tape measure, then refer to the manufacturer's sizing chart to select the appropriate size helmet. Please review our blog posting on how to properly fit your new auto racing helmet from Discovery Parts. What safety standards should I look for in a racing helmet? Look for helmets that meet safety standards like Snell and FIA depending on your racing discipline. These standards ensure the helmet's safety and quality. DOT helmets are designed for street use and not for racing and track use. What's the difference between full-face and open-face, and helmets? Full-face helmets provide the most protection with a complete face shield, while open-face helmets cover the top and sides of the head. Can I use a motorcycle helmet for auto racing? No, motorcycle helmets do not provide the same level of protection as auto racing helmets, as they are designed for different purposes. It's recommended to use a helmet specifically designed for auto racing which includes fire protection in addition to impact protection. How often should I replace my Arai GP-7 auto racing helmet? Auto racing helmets should be replaced every 5-10 years, depending on the manufacturer's recommendations and usage. If the helmet is involved in a crash, it should be replaced immediately. Are expensive racing helmets safer than budget ones? Safety standards dictate the minimum safety requirements, so even budget-friendly helmets can offer protection. However it’s important to consider how lower-priced helmets are meeting the required testing standards. More expensive helmets are lighter, smaller, are constructed of superior materials, and often come with additional features then less expensive helmets. How do I maintain and clean my Arai GP-7 Auto racing helmet? Follow the manufacturer's instructions for cleaning and maintenance. You should clean the exterior, interior and shield with the Molecule Helmet Care Kit. Do I need to wear a balaclava under my Arai GP-7 Auto racing helmet? Balaclavas are typically not required for Driver's Education events, however they make wearing a helmet much, much more comfortable. Balaclavas will provide fire protection (if fire rated), help keep your helmet lining clean and order free by absorbing the majority of sweat while using it, and additionally balaclavas make putting your helmet on and taking it off by protecting your ears and keeping from from folding over when you helmet is worn. Discovery Parts recommends balaclavas from Alpinestars, OMP, Sabelt, Sparco, and Stand21. If you are entering sanctioned auto racing events, balaclavas will be required for fire protection. Is the SNELL SA Rating important? The Snell SA2020 certification is a safety standard established by the Snell Memorial Foundation for auto racing helmets. It sets the criteria and requirements that helmets must meet to be considered safe and suitable for use in motorsport events. Snell SA2020 certification is highly regarded in the motorsports industry and is often required or recommended by racing organizations and events. It signifies that a helmet has passed rigorous testing to provide maximum safety for drivers in various motorsport disciplines, including road racing, NASCAR, Formula 1, drag racing, and more. It's essential for drivers to check the specific safety standards required by the racing organizations they participate in to ensure compliance. Is the FIA helmet certification important? Yes, FIA (Fédération Internationale de l'Automobile) certification is crucial for auto racing helmets, especially in the context of international motorsport events and many national and regional racing series in the USA. The FIA 8859-2015 standard is commonly associated with racing helmets used in various motorsport disciplines. Helmets certified to FIA 8859-2015 met the safety requirements set by the FIA and were widely accepted in many racing series Which helmet certification is the most stringent and the hardest to meet? The FIA 8860-2018 certification is considered the most stringent and advanced helmet certifications available for auto racing helmets, and it is often associated with top-tier motorsport categories like Formula 1. It's important to note that the FIA 8860-2018 helmets offer a high level of protection and their use is mandatory in many racing series. Drivers should always check the regulations of the racing series they intend to participate in to ensure compliance with helmet certification standards. Can I wear glasses with my Arai GP-7 Auto Racing helmet? Most helmets have provisions for wearing glasses or goggles, but check the design to be sure. Most manufacturers feature helmet models with wider eye ports to better accommodate eye glasses. Are carbon fiber helmets better? Carbon fiber helmets are lightweight and strong, a top choice for racers. But remember, certification matters most. Can I use a used helmet for racing? It's best to buy a new helmet. Used helmets may have unseen damage or be out of date on safety standards. Can I buy replacement parts for my Arai GP-7 Auto Racing helmet, like visors or padding? Many manufacturers offer replacement parts, including visors and padding, to extend your helmet's lifespan. How can I prevent Arai GP-7 Auto Racing helmet fogging during races? Anti-fog sprays and inserts are available to help keep your visor clear during races. What's the importance of proper helmet ventilation? Proper ventilation helps keep you cool and comfortable during races, reducing the risk of heat exhaustion. How do I store my Arai GP-7 Auto Racing helmet between races? Keep it in a cool, dry place away from direct sunlight and chemicals in a bag designed to store your auto racing helmet, like the Discovery Parts Evo Helmet Bag. Where can I buy a certified racing helmet? You should only buy from a professional authorized dealer who has sold thousands of helmets. You can find all the best brands at Discovery Parts online at www.discoveryparts.com or visit our retail store at Atlanta Motorsports park or at one of the hundreds of race and track day events we attend and support. Remember, safety should always come first in auto racing. Choose a certified helmet that meets the necessary standards to protect yourself on the track. We take immense pride in offering a wide selection of Arai auto racing helmets, designed to meet the demands of professional racers and motorsports enthusiasts alike. Arai has been at the forefront of helmet innovation and safety for decades, earning a reputation as a top-tier brand in the racing world. Key Features of Arai Racing Helmets: Unparalleled Safety: Arai racing helmets are engineered to the highest safety standards, including certifications like Snell and DOT approval, ensuring your head is well-protected in high-speed racing conditions. Premium Materials: Crafted with precision, Arai helmets feature carbon fiber construction, making them lightweight yet incredibly strong for maximum protection. Comfort and Fit: Arai's commitment to comfort is evident in the design of their helmets. They offer a range of sizes, and many models have customizable padding to ensure a snug fit. Aerodynamic Design: Arai helmets are designed with aerodynamics in mind, reducing wind resistance and enhancing performance on the track. Our Extensive Bell Auto Racing Helmet Collection: Arai GP-7SRC ABP 8860-2018 Carbon Fiber Helmet Arai GP-7SRC 8860-2018 Carbon Fiber Helmet ARAI GP-7 SA2020 Helmet ARAI GP-5W SA2020 Helmet Frequently Asked Questions About Arai Helmets: Where are Arai helmets made? Arai helmets are proudly manufactured in Japan, maintaining the highest quality standards. Is Arai a good helmet brand? Yes, Arai is renowned for its commitment to safety, innovation, and performance, making it a trusted choice among professional racers and enthusiasts. Are Arai helmets Snell approved? Yes, many Arai helmets are Snell approved, meeting rigorous safety standards. Are Arai helmets FIA approved? Absolutely, several Arai helmets are FIA 8860-2018 certified, ensuring they meet the most stringent safety requirements. Do Arai helmets run small? Arai offers a variety of sizes and often provides sizing charts to help you choose the right fit. It's important to measure your head and refer to their guidelines for a proper fit. For racers who demand the best in safety and performance, Arai auto racing helmets are the ultimate choice. Explore our extensive collection to find the perfect helmet for your racing needs. Arai Racing Helmets: Arai Racing Helmets are renowned for their exceptional quality and safety features. With a wide range of models to choose from, you can find the perfect Arai Racing Helmet to suit your racing needs. Arai Racing Helmet: Each Arai Racing Helmet is a product of meticulous craftsmanship and cutting-edge technology. When you wear a Arai Racing Helmet, you're choosing a helmet that prioritizes your safety and performance on the track. Arai Race Helmets: Arai Race Helmets come in various styles and designs to cater to different types of motorsports. Whether you're into karting, open-wheel racing, or stock car racing, Arai has race helmets tailored for your specific discipline. Arai Race Helmet: Your Arai Race Helmet is more than just protective gear; it's a crucial part of your racing ensemble. The aerodynamic design of a Arai  Race Helmet helps reduce wind resistance, giving you a competitive edge. Arai Helmet: A Arai Helmet is a symbol of trust in motorsports. Professional racers and amateurs alike rely on the comfort, safety, and durability that Bell Helmets provide during intense racing conditions. Arai Helmets: Arai Helmets have a rich history of innovation and excellence. The extensive range of Arai Helmets ensures that there's a model suitable for every racer, whether you're a seasoned pro or just starting in the sport. Arai Carbon Fiber Helmet: Arai Carbon Fiber Helmets combine the lightweight properties of carbon fiber with advanced safety features. These helmets are a top choice for racers seeking the ultimate in protection without sacrificing comfort. Race Car Helmet: A race car helmet is a fundamental piece of safety gear for any racer. Arai's race car helmets are engineered to meet the rigorous demands of motorsports, ensuring you stay safe on the track. Racing Helmet: Your racing helmet is your shield against potential accidents. Arai Racing Helmets are designed to offer superior impact protection while maintaining optimal visibility and ventilation. Racing Helmets: Racing helmets are a racer's best friend. Arai Racing Helmets, with their reputation for quality and safety, are the go-to choice for many professionals and enthusiasts in the racing community. Arai Racing: Arai Racing is synonymous with excellence in the motorsports industry. Their commitment to research, development, and testing has solidified their position as a leader in racing helmet technology. Auto Racing Helmet: When it comes to auto racing, your helmet is your first line of defense. Arai Auto Racing Helmets are engineered to withstand the rigors of high-speed racing, ensuring your head is protected. Auto Racing Helmets: Auto racing helmets from Arai are designed to provide optimal head protection while maintaining lightweight and aerodynamic qualities, allowing you to perform at your best.