New products

A1-102 Girodisc 2pc Front Brake Rotors FITMENT: Ferrari 430 Challenge, Front is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement1 for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair. 1 Note: These Girodisc rotors have a different annulus (pad swept area) than the OEM CCM rotors, to maintain their light weight. A brake pad with an annulus of 66mm or less must be used with these Girodisc rotors. The necessary pad shape is very common, found on the Nissan GT-R, Cadillac CTS-V, and most AMG Mercedes equipped with six-piston calipers. If there's a specific pad and/or compound you're after please, contact us at (844) 438-7244 and we'll get you what you need!

D1-015 GiroDisc Replacement Rotors FITS: FERRARI 360 CHALLENGE REPLACEMENT ROTOR DISC ONLY, DOES NOT INCLUDE ALUMINUM HAT. is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

FITS: FERRARI 360 CHALLENGE REPLACEMENT ROTOR DISC ONLY, DOES NOT INCLUDE ALUMINUM HAT. is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

D1-001 GiroDisc Replacement Rotors Fitment: Ferrari F430 REPLACEMENT ROTOR DISC ONLY, DOES NOT INCLUDE ALUMINUM HAT. Need new rings for the Girodisc two-piece rotors on your Ferrai F430 or 360 Modena?  We've got them.  Rings come complete with all-new hardware and full instructions for re-assembly.Sold/priced per pair.

FITS: Ferrari 360 Challenge   is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline.   The GiroDisc system is an upgrade to a 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc.  The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly.  By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency.  The Giro Disc rotors are lighter than OEM pieces.  The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.   When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum.  The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations.  The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.     The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.   The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.   Sold/Priced per pair.

A1-015 Girodisc 2pc Front Brake Rotors Ferrari 360 Challenge FITS: Ferrari 360 Challenge (front) is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or next business day to ensure we meet your delivery deadline. This Girodisc system upgrades the OEM brakes to a two-piece steel disc and aluminum hat. This two-piece floating rotor is designed to bolt directly to the Ferrari 360 Challenge front and work flawlessly with the OEM calipers. Upgrading your brakes to lightweight, high-performance Girodisc rotors, you maintain the factory brake bias and ABS effectiveness. Much lighter than the OEM rotors, Girodisc rotors reduce rotational and unsprung mass giving you stronger braking and faster suspension response. Combined with Pagid or PFC performance brake pads and RF-1 brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked, warped rotors that result from high-performance driving. The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc. The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors. This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs. Sold/priced per pair.

Trac-Com V4 Dual Intercom System   What’s different about this version? The V4 is an entirely new design, offering improved functionality in a more streamlined package. We have even included a lanyard to hang it around your neck without holding it.  Volume levels and sound quality have been dramatically increased, making it easier than ever to hear in loud environments. Individual volume inputs can now be adjusted using glove-sized low-profile textured buttons on the front of the device.  The V4 also incorporates a low-power backlit LCD screen that displays each user's volume and the device's battery status.  Speaking of batteries, we’ve completely rethought how the Trac-Com V4 is powered. For the first time, we’re incorporating a Dual Battery System with a built-in Li-Ion rechargeable battery and a compartment for a removable 9V battery. The lightweight internal battery can be used exclusively to power the V4, providing several hours of use and reducing operating costs.  Don’t have time to charge it? Insert a 9V battery, and you’ll add hours of use and never be without power again. If a 9V battery is installed in a fully charged (internal battery) Trac-Com V4, the device will favor the removable 9V, reserving the internal battery for later use.  Although the device is entirely new, we haven’t forgotten about our longtime Trac-Com users. The Trac-Com V4 uses the same 5-pin headset connectors customers have relied on for years, making this new version fully backward compatible with previous headsets and adapter cables.  The Trac-Com Dual Intercom System is the ultimate solution for driver-passenger communication. This state-of-the-art intercom system, created by RaceCom, offers superior sound and reliability in a flexible package. RaceCom has been providing top-quality racing communication solutions since 1995, making them a trusted name in the industry.Say goodbye to years of frustration with other in-helmet intercom systems, and experience the convenience and quality of Trac-Com. Designed and manufactured in the USA, Trac-Com is the premier choice for racing intercoms and driver/passenger communication. With its adaptable design, it can be used in a variety of applications. The Trac-Com Dual Intercom System includes one R TC INTERCOMV4 base unit and two R TC HS BOOMV2 boom mic/speaker headsets.  Say goodbye to years of frustration with inferior in-helmet intercom systems, and experience the convenience, quality, and reliability of Trac-Com. Don't settle for subpar communication on the track or on the road - upgrade to Trac-Com and experience the difference for yourself. Trac-Com Dual Intercom System Includes: (1) Trac-Com Intercom Base Unit V4 (2) Trac-Com boom mics (R TC HS BOOMV2) (1) internal battery (1) tether

A1-001 Girodisc 2pc Front or Rear Brake Rotors (Ferrari F430 & 360) FITS THE FOLLOWING CARS: Ferrari F430 (front and rear) Ferrari 360 Modena (front and rear) is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or next business day to ensure we meet your delivery deadline.This Girodisc system upgrades the OEM brakes to a two-piece steel disc and aluminum hat. This two-piece "floating rotor" design will bolt directly to the Ferrari F430 or 360, front or rear, and work flawlessly with the OEM calipers. Upgrading your brakes to lightweight, high-performance Girodisc rotors, you maintain the factory brake bias and ABS effectiveness. Much lighter than the OEM rotors, Girodisc rotors reduce rotational and unsprung mass giving you stronger braking and faster suspension response. Combined with Pagid or PFC performance brake pads and RF-1 brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked, warped rotors that result from high-performance driving. The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc. The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors.This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs. Sold/priced per pair.

FITS: Ferrari 355 CHALLENGE is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc system is an upgrade to a 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc.  The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly.  By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency.  The Giro Disc rotors are lighter than OEM pieces.  The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum.  The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations.  The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

D1-002 GiroDisc Replacement Rotors FITS: FERRARI 348/355 REPLACEMENT ROTOR DISC ONLY, DOES NOT INCLUDE ALUMINUM HAT. is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.   >The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

A1-054 Girodisc 2pc Front Brake Rotors FITS: Ferrari 355 Challenge front is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or next business day to ensure we meet your delivery deadline. This Girodisc system upgrades the OEM brakes to a two-piece steel disc and aluminum hat. This two-piece "floating rotor" design will bolt directly to your Ferrari 355 Challenge front and work flawlessly with the OEM calipers. Upgrading your brakes to lightweight, high-performance Girodisc rotors, you maintain the factory racing-brake bias and ABS effectiveness. Quite a bit lighter than the original rotors, these Girodisc rotors reduce both rotational and unsprung mass giving you stronger braking and faster suspension response. Combined with Pagid or PFC performance brake pads and RF-1 racing brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked, warped rotors that result from high-performance driving. The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc. The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors. This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs. Sold/priced per pair.

A1-002 Girodisc 2pc Front Brake Rotors Engineered to Stop Harder, Last Longer, and Shred Weight The A1-002 Girodisc 2pc Front Brake Rotors is a track-proven upgrade for serious drivers who demand fade-free performance, reduced unsprung weight, and race-ready reliability. Designed to replace the OEM rotor while retaining factory calipers, this 2-piece GiroDisc rotor brings you shorter stopping distances, better heat dissipation, and quicker acceleration off the corners. GiroDisc Rotor Features: Two-Piece Floating Design: Reduces rotational mass and improves heat management — perfect for repeated high-speed braking. High Carbon Alloy Rotor Ring: Manufactured in the USA, GiroDisc rotor rings use a proprietary alloy for long life and consistent performance under track conditions. CNC-Machined 6061-T6 Aluminum Hat: Lightweight, anodized hats reduce unsprung weight and help with temperature management. Direct Bolt-On Replacement: Installs with no modifications; works with factory calipers and hardware. A1-002 Girodisc 2pc Front Brake Rotors FAQs: Will this rotor fit my OEM calipers? Yes, GiroDisc 2-piece rotors are designed as a direct bolt-on upgrade for use with your factory calipers. Are the rotor rings replaceable? Absolutely — GiroDisc rotors are designed with serviceable hardware, allowing you to replace just the rings and reuse the hats. Is this rotor suitable for track use? 100%. GiroDisc rotors are engineered with motorsport in mind and are trusted by amateur and professional drivers alike. What’s the benefit of a floating rotor? Floating rotors allow for axial movement to reduce thermal stress and maintain pad contact during hard braking. Upgrade your stopping power with the precision and performance of GiroDisc. Whether you're shaving lap times or enhancing your street car, this rotor delivers where it matters most.

Call us any time at 888-748-7223 for Discovery Parts-Exclusive Forgeline pricing you won't find anywhere else! Discovery Parts offers FREE SHIPPING on all Forgeline Wheel Orders! FORGELINE GZ3R (5 LUG) Priced per Wheel (ask about our special wheel and tire package pricing) CONTACT ONE OF OUR SPECIALISTS TODAY TO CREATE YOUR CUSTOM FORGED WHEEL SET. BECAUSE WE USE FORGELINES ON OUR OWN CARS, WE KNOW WHAT WORKS FOR YOURS! After over 20 years of involvement with teams of virtually every sports car racing organization in the world, we have learned what it takes to produce a racing wheel that can withstand the fierce conditions of the sport. This knowledge has been applied to our latest competition wheel - the GZ3R.An updated version of the incredibly popular ZX3R, the Forgeline GZ3R is an attractive contemporary premium 3-piece performance racing wheel featuring our "I-beamed" spoke technology to reduce weight while adding strength and rigidity. It uses hidden ARP stainless steel assembly hardware for a smooth clean appearance and faster/easier wheel cleaning. Plus the design of the center allows plenty of room for caliper clearance and extreme brake fitment. Visible through-bolts are an option on this wheel, for those who prefer the look of the assembly hardware. The GZ3R is designed for racing. It is engineered with a 1900 lb. street-tire load rating to ensure strength and integrity, even when subjected to the massive loads encountered when used with the stickiest race tires. The GZ3R is produced using our traditional forging method utilizing 6061-T6 aluminum with heat-treated rim shells. And just like any Forgeline wheel, the GZ3R offers fully-customizable fitment and finish, including center-lock applications. 3-Piece Performance Wheel Stepped-Lip Design I-Beamed Spoke Technology Hidden ARP Fasteners Generous Brake Clearance Forged 6061-T6 Aluminum Heat-Treated Rim Shells 1900 lb. Street-Tire Load Rating Customizable Fitment and Finish Options

Call us any time at 888-748-7223 for Discovery Parts-Exclusive Forgeline pricing you won't find anywhere else! Discovery Parts offers FREE SHIPPING on all Forgeline Wheel Orders! FORGELINE GW3R (5 LUG) Priced per Wheel (ask about our special wheel and tire package pricing) CONTACT ONE OF OUR SPECIALISTS TODAY TO CREATE YOUR CUSTOM FORGED WHEEL SET. BECAUSE WE USE FORGELINES ON OUR OWN CARS, WE KNOW WHAT WORKS FOR YOURS! After over 20 years of involvement with teams of virtually every sports car racing organization in the world, we have learned what it takes to produce a racing wheel that can withstand the fierce conditions of the sport. This knowledge has been applied to our latest competition wheel - the GW3R.The Forgeline GW3R is an attractive contemporary premium 3-piece performance racing wheel featuring our "I-Beamed" spoke technology to reduce weight while adding strength and rigidity. It uses hidden ARP stainless steel assembly hardware for a smooth clean appearance and faster/easier wheel cleaning. Plus the design of the center allows plenty of room for caliper clearance and extreme brake fitment. Visible through-bolts are an option on this wheel, for those who prefer the look of the assembly hardware. The GW3R is designed for racing. It is engineered with a 1900 lb. street-tire load rating to ensure strength and integrity, even when subjected to the massive loads encountered when used with the stickiest race tires. The GW3R is produced using our traditional forging method utilizing 6061-T6 aluminum with heat-treated rim shells. And just like any Forgeline wheel, the GW3R offers fully-customizable fitment and finish, including center-lock applications. 3-Piece Performance Wheel Stepped-Lip Design I-Beamed Spoke Technology Hidden ARP Fasteners Generous Brake Clearance Forged 6061-T6 Aluminum Heat-Treated Rim Shells 1900 lb. Street-Tire Load Rating Customizable Fitment and Finish Options

Call us any time at 888-748-7223 for Discovery Parts-Exclusive Forgeline pricing you won't find anywhere else! Discovery Parts offers FREE SHIPPING on all Forgeline Wheel Orders! FORGELINE GA3R CL (PORSCHE CENTERLOCK) Priced per Wheel (ask about our special wheel and tire package pricing) CONTACT ONE OF OUR SPECIALISTS TODAY TO CREATE YOUR CUSTOM FORGED WHEEL SET. BECAUSE WE USE FORGELINES ON OUR OWN CARS, WE KNOW WHAT WORKS FOR YOURS! After over 20 years of involvement with teams of virtually every sports car racing organization in the world, Forgeline has learned what it takes to produce a lightweight racing wheel that can withstand the fierce conditions of the sport. This knowledge has been applied to their latest and greatest - the best three-piece wheel that they have ever made - the GA3R. This version, the GA3R CL, is engineered specifically for Porsche Center Lock applications.Their signature "I-beamed" spoke technology reduces weight and applies additional strength and rigidity within the spokes of the wheel. The hidden titanium assembly hardware delivers a smooth clean look and makes wheel cleaning faster and easier. The design of the GA3R's center allows plenty of room for caliper clearance and extreme brake fitment. And Forgeline employed a new, proprietary fast-drying super-strength sealer that is highly resistant to leaks and allows for quick and easy repairs.The GA3R CL is truly designed for racing. It is engineered with a 2100-lb. street-tire load rating to ensure strength and integrity, even when subjected to the massive loads encountered on the stickiest race tires. And it is the only wheel that is actually warranted for use in racing applications!The GA3R CL is produced using Forgeline's traditional forging method, machined from 6061-T6 aluminum billets with heat-treated rim-shells. And just like any Forgeline wheel, the GA3R CL is fully customizable in fitment and finish.Now available in 18-inch, 19-inch, and 20-inch sizes in virtually any width and offset. Extremely Lightweight and Very Strong 3-Piece Competition Wheel Stepped-Lip Design I-Beamed Spoke Technology Lightweight Titanium Fasteners Hidden Fasteners Generous Brake Clearance Forged 6061-T6 Aluminum Heat-Treated Rim Shells 2100-lb. Street-Tire Load Rating Warranted for Racing! Unlimited Customizable Fitment and Finish Options

Call us any time at 888-748-7223 for Discovery Parts-Exclusive Forgeline pricing you won't find anywhere else! Discovery Parts offers FREE SHIPPING on all Forgeline Wheel Orders! FORGELINE GA3R (5 LUG) Contact one of our wheel specialists today at 888-748-7223 to discuss your custom Forgeline wheel package. We can help you with sizing, offset, finish selection, and features. Plus, they are racing tire specialists who can put together the perfect wheel-and-tire package to suit your needs! After over 20 years of involvement with teams in virtually every sports car racing series in the world, Forgeline knows what it takes to produce a lightweight racing wheel that can withstand the fierce conditions of the sport. This knowledge has been applied to their latest and greatest, the best three-piece wheel that they have ever made: the GA3R.Forgeline's signature I-Beamed Spoke technology reduces weight and adds strength and rigidity to the spokes of the wheel. The hidden titanium assembly hardware delivers a smooth, clean look, making wheel cleaning faster and easier. The design of the GA3R's center allows plenty of room for caliper clearance and extreme brake fitment. Forgeline employs a proprietary fast-drying, super-strength sealer that is highly resistant to leaks and allows for quick and easy repairs.The Forgeline GA3R is truly designed for racing. Each wheel is engineered with a 2100-lb. load rating to ensure strength and integrity when subjected to the massive forces encountered on the stickiest race tires. It is the only wheel actually warranted for use in racing applications!The GA3R is produced using Forgeline's traditional forging method, milled from a 6061-T6 aluminum billet with heat-treated rim shells. Like any Forgeline wheel, the GA3R is fully customizable in fitment and finish, including center lock applications. It is available in 17-, 18-, 19-, and 20-inch sizes in virtually any width and offset. FEATURES: Extremely Lightweight and Very Strong Forged 6061-T6 Aluminum Three-Piece Competition Wheel Stepped-Lip Design I-Beamed Spoke Technology Hidden, Lightweight Titanium Fasteners Generous Brake Clearance Heat-Treated Rim Shells 2100-lb. Street-Tire Load Rating Warranted for Racing Unlimited Customizable Fitment and Finish Options