Porsche Carbon Fiber

GT2 RS Style Wing End Plates for the GT3 RS FITS: 991.1 & 991.2 Porsche GT3 RS C3 Carbon has created a GT2-Style, 100% dry carbon fiber rear-wing end plates that bolt directly to the factory GT3 RS wing! The OEM GT2 RS end plates use a completely different attachment system (adhesive) than the OEM GT3 RS end plates (bolt-on). But we love the look of the GT2 RS wing ends. So we married the two, giving our customers the look of the GT2 RS on their GT3 RS! The C3 Carbon end plates precisely match the uncompromising look, fitment, and finish of the factory Porsche carbon rear wing. They attach in exactly the same way as the OEM GT3RS end plates; no drilling, modifying, etc. required. Just bolt them up and go. C3 starts with 3D laser scanning to make an ultra-precise, CNC-machined aluminum billet mould for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. The look and finish are truly amazing! The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. Available in either high-gloss or matte/satin automotive urethane clear coat, or satin black automotive coating. FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing Gloss clear, satin clear, or satin black finish available OEM-perfect fit Installs in minutes without any modification using original hardware Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Installation Instructions Here Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Porsche GT2 RS / GT3 RS Front Brake NACA Ducts FITS: 991.2 Porsche GT2 RS and GT3 RS C3 Carbon offers this GT2 RS / GT3 RS 100% carbon fiber front NACA brake duct kit, giving you the uncompromising look, fitment, and finish to match your Porsche's factory carbon perfectly. You get replacements for the two NACA ducts on the exterior (top) of your front trunk bonnet and two replacements for the interior ducts on the bottom side. The NACA ducts match the 2x2 carbon weave on your Porsche's factory carbon, finished with either a high-gloss or smooth satin automotive urethane top coat. The interior ducts are matched to the weave and matte finish of the bonnet's underside. All four pieces are pure dry carbon fiber, no overlays. INCLUDES: Two NACA ducts (top side of bonnet) Two interior ducts (bottom side of bonnet) 3M VHB double-sided trim adhesive FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon Clear-coated with durable automotive urethane OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

Carbon Fiber Wing End Plates For Porsche GT3 RS FITS: 991.1 and 991.2 Porsche GT3 RS C3 Carbon 100% carbon fiber rear-wing end plates with the look, fitment, and finish that matches your GT3 RS carbon rear wing perfectly. C3 uses 3D laser scanning to make an ultra-precise mold CNC-machined into an aluminum billet for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. There's no modification, drilling, etc. needed -- the C3 Carbon parts are ready to bolt on. The look, however, is pure carbon fiber! These really are the pieces Porsche should have put on the GT3 RS in the first place. The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. The high-gloss automotive urethane top coat is hand-applied and polished to a smooth mirror finish. FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Easy bolt-on, no modifications required Installs in minutes without any modification using original hardware Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Installation Instructions Here Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Porsche GT2 RS Wing End Plates FITS: 991.2 Porsche GT2 RS C3 Carbon GT2 RS 100% carbon fiber rear-wing end plates offer the uncompromising look, fitment, and finish to match the GT2 RS carbon rear wing perfectly. C3 uses 3D laser scanning to make an ultra-precise mold CNC-machined into an aluminum billet for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. The look and finish are simply glorious. These really are the pieces Porsche should have put on the GT2 RS in the first place. The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. Available in high-gloss or matte/satin clear automotive urethane top coat, or satin black top coat. FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing Available in gloss or matte/satin clear, or satin black top coat OEM-perfect fit Installs in minutes without any modification using original hardware Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Installation Instructions Here Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

Silver Rocket GT4 RS Dry Carbon Fiber 3" Wing Risers This product fits the following car: Porsche 718 GT4 RS (2022+) The Silver Rocket GT4 RS Dry Carbon Fiber 3-inch Wing Riser is the only carbon fiber riser available on the market that is 100% customized for the Porsche 718 GT4 RS model. It is the upgraded version of our best-selling Silver Rocket GT4 RS 3-inch wing riser (OEM AlSi7Mg casting). The Silver Rocket 3" Dry Carbon Fiber Wing Riser raises the Porsche 718 GT4 RS rear wing up 3 inches into the cleaner air flowing over the top of the car, adding downforce and improving rearward visibility from within the cockpit. Silver Rocket 3" CF Wing Riser Highlights Lightest Wing Riser: weighing in at only 3.3 lbs (1493g), the Silver Rocket 3" Dry Carbon Fiber Wing Riser is 2.4 lbs (1089g) lighter than the stock Porsche wing brackets, making it the lightest wing riser for the GT4 RS. Track-tested Quality: Silver Rocket uses 100% racing-grade dry carbon fiber in the making of this wing riser to ensure its superior quality. The riser has been rigorously tested both in the lab and on track, exhibiting great strength and stability under extreme conditions during lap time record tests. It can withstand over 500 lbs. of downforce even with the Porsche Clubsport Rear Wing, while maintaining extreme stability. Improved Rear Visibility: the Silver Rocket 3" Dry Carbon Fiber WIng Risers also provide added visibility benefits. See clearly through the rear mirror, crucial for high-speed racing safety. Enhanced Downforce: by extending the factory wing 3 inches higher, these Silver Rocket risers enhance rear downforce, delivering exceptional performance on both the track and street. Sleek Full Carbon Aesthetics: with its 100% dry carbon fiber construction, sleek design, and attention to detail, this wing riser elevates the overall appearance of your GT4 RS to a whole new level. Hassle-Free Installation: it is designed to be 100% OEM compatible, seamlessly integrating with your Porsche 718 GT4 RS. No need for drilling additional holes or complex modifications. Install with ease and get ready to experience the difference. The SR GT4 RS Dry Carbon Fiber 3-inch Wing Riser optimizes rear wing downforce by raising the factory wing 3 inches, further improving the car's aerodynamic performance. Additionally, it improves rear-view visibility to ensure that the driver's overall rear vision, particularly in high-pressure track environments, is not obstructed by the wing, significantly enhancing driving safety.

Silver Rocket Dry Carbon Fiber Air Intake Scoops (Left & Right) Applications: Porsche 718 Cayman GT4/GT4 RS/Clubsport Porsche 981 Cayman GT4 Increase Air Intake Volume, Velocity, and Performance The new Silver Rocket Dry Carbon Fiber High-Flow Air Intake Scoops increase air intake by 22% and optimize dynamic performance. These race-inspired intakes also give the Porsche 718 or 981 GT4 a more sporty air intake sound. Made of racing-grade dry carbon fiber, they provide a more track-like exterior aesthetics. Easy to install, these are a must-have for track-bound Porsche GT4, GT4 RS, or Clubsports. Not applicable for models with Weissach package. Priced for two intake scoops (one left & one right).

Silver Rocket Dry Carbon Fiber Gurney Flap Applications: Porsche 718 GT4 Porsche 718 GT4 RS Porsche 718 GT4 Clubsport Unleash The Aero Efficiency Of Your GT4 RS Inspired by Porsche racing cars, the Silver Rocket Dry Carbon Fiber Rear Ducktail Gurney Flap increases the rear downforce, decreasing aerodynamic drag while maintaining the original street car style. Made of racing-grade dry carbon fiber, the Silver Rocket Gurney Flap also provides a more track-like exterior aesthetic.

Silver Rocket Dry Carbon Fiber Gurney Flap Applications: Porsche 718 (all models, street or race car) Pipe A/C Right Into Your Helmet On The Track The Silver Rocket Enduro Forced Air Adapter was originally designed for maximum driver cooling in the Silver Rocket Racing Porsche 718 GT4 Clubsport during endurance races. Silver Rocket then refined the design to serve as the ideal cooling solution for any 718 model on hot, intense track days. The adapter easily connects to your car's A/C vent, directing cool, dry air straight into your helmet and providing a refreshing breeze on every lap. Silver Rocket Enduro Forced Air Adapter Highlights Proven on-track through real endurance racing Crafted from 100% aerospace-grade dry carbon fiber Custom fit for all Porsche 718 models Dual outlet design: the adapter fits both the middle and side vents, allowing for two adapters - one for helmet cooling and one for seat cooling!