Carbotech Brakes
Carbotech CTFRP3116 AP Racing CP8350 D50 Brake Pads 20mm
from $175.00
Carbotech Brake Pads
How To Properly Bed In Carbotech Racing Brake Pads
Carbotech AP Racing CP8350 D50 Fepth Brake Pads 20mm Details:
Manufacturer: Carbotech
Manufacturer part number: CTFRP3116
Fits: AP Racing CP8350 D50 Center Arc. 20mm Thickness Calipers
Hawk Interchange: HB521.800
Carbotech Interchange: CTFRP3116
Circo Interchange: MB2660
Endless Interchange: RCP106
AP Racing CP8350 D50 Center Acr. 20mm thick Carbotech Brake Pads are available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds.
Carbotech Brake Compounds
Carbotechâ 1521â
The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use.
Carbotechâ AX6â
The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications.
Carbotechâ XP8â
A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers.
Carbotechâ XP10â
When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP12â
Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP20â
The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP24â
XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotechâ RP2â
The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ 913 Kelated Metallicâ
A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
Carbotech AP Racing CP8350 D50 Brake Pads 20mm Cross Refenence:
Carbotech: CTFRP3116
Circo: MB2660
Endless: RCP106
Ferodo: FRP3116
[img-12152-left-large_default]
Carbotech Brakes
Carbotech CT1793 2015+ Mustang GT (S550) Rear Race Pads
from $175.00
Carbotech CT1793 2015+ Mustang GT (S550) Rear Race Pads
Carbotech CT1793 Race Pads For 2015+ Ford Mustang GT Rear. Available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds.
Carbotech CT1793 2015+ Mustang GT (S550) Race Pads Details
Manufacturer: Carbotech
Manufacturer Part Number: CT1793
How To Properly Bed In Carbotech Racing Brake Pads
BRAKE COMPOUNDS
Carbotech 1521
The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800 F (426 C+). 1521 is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech 1521 is NOT recommended for ANY track use.
Carbotech AX6
The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6 for street driving as well, even though Carbotech doesn't recommend street driving with AX6 due to possible elevated levels of dust and noise. AX6 is NOT recommended as a race compound in most applications.
Carbotech XP8
A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotech XP8 is a great compound on the front & rear of most open wheel and sports racers.
Carbotech XP10
When Carbotech unleashed the XP10 to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10 has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10 still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech compounds so successful. Carbotech XP10 is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotech XP12
Another highly successful XPâseries compound with an excellent initial bite, torque and fade resistance over and above the XP10 compound. XP12 has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12 is more rotor aggressive than XP10 , but compared to the competition the XP12 is still very rotor friendly. XP12 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech XP20
The latest iteration of the highly successful XP series of compounds. XP20 is a step up from the highly successful XP16 compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20 is another major step in progression of the highly successful XP series line of compounds from Carbotech . XP20 has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotech XP20 maintains our tradition of having the outstanding release and modulation that has made all other Carbotech compounds so successful. Carbotech XP20 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech XP24
XP24 is the pinnacle compound of the extremely successful XP Series of compounds engineered by Carbotech . This compound is based on the same fundamentals that exist in all other Carbotech formulations. XP24 has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24 has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotech XP24 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotech RP2
The RP2 compound was engineered for endurance racing based on our highly successful XP Series formulations. RP2 has strong initial bite, a little less modulation than our XP12 , but still maintains the rotor friendliness of our XP series compounds. RP2 has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2 is as rotor friendly as our XP series compounds. Carbotech RP2 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech 913 Kelated Metallic
A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
Carbotech Brakes
Carbotech CT528 Brake Pads - Toyota Rear
from $174.00
Carbotech CT528 Brake Pads - Toyota Rear
Fitting many Toyota rear axle applications, the Carbotech CT528 are available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds.
How To Properly Bed In Carbotech Racing Brake Pads
Carbotech AP Racing CP8350 D50 Fepth Brake Pads 18mm Details:
Manufacturer: Carbotech
Manufacturer part number: CT528
Fits: Toyota Rear
Hawk Interchange: Unknown
Carbotech Interchange: CT528
[img-15516-left-large_default]
Carbotech Brake Compounds
Carbotechâ 1521â
The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use.
Carbotechâ AX6â
The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications.
Carbotechâ XP8â
A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers.
Carbotechâ XP10â
When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP12â
Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP20â
The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP24â
XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotechâ RP2â
The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ 913 Kelated Metallicâ
A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
[img-15516-left-large_default]
Carbotech Brakes
Carbotech CT525 1.6L Miata Front 1990-1993
from $174.00
Carbotech Brake Pads
Carbotech 1.6L Miata Front Brake Pads for 1990-1993 Mazda Miata. 1st Generation Miata front brake pads in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. Carbotech makes many different compounds for your NA 1.6L Miata and for the track, the most popular set-up is XP10 Front and XP8 rear. This seems to balance out the Hoosier Spec tire to the suspension nicely. If you run a stickier tire, you want to start with XP10/XP8 and maybe go to XP12 after you determine you can handle the increased torque without getting into the ABS.
How To Properly Bed In Carbotech Racing Brake Pads
Manufacturer: Carbotech
Manufacturer Part Number: CT525
Thickness: .560" (14mm)
Hawk equivalant: HB148_.
Brake Compounds
Carbotechâ 1521â
The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use.
Carbotechâ AX6â
The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications.
Carbotechâ XP8â
A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers.
Carbotechâ XP10â
When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP12â
Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP20â
The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP24â
XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotechâ RP2â
The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ 913 Kelated Metallicâ
A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
Carbotech Brakes
Carbotech Race Pads Mustang Shelby GT350 2016+ Rear
from $173.00
CARBOTECH BRAKE PADS
Carbotech Race Pads For 2016+ Ford Mustang Shelby GT350 Rear. Available in Carbotech AX6, XP8, XP10, XP12, and XP20 compounds, When running the factory Cup 2 tires and stock or mild suspension, XP12 Front and XP10 Rear is the most popular.
How To Properly Bed In Carbotech Racing Brake Pads
Manufacturer: Carbotech
Manufacturer part number: CT1854
[img-12034-left-large_default]
BRAKE COMPOUNDS
Carbotechâ 1521â
The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use.
Carbotechâ AX6â
The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications.
Carbotechâ XP8â
A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers.
Carbotechâ XP10â
When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP12â
Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP20â
The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP24â
XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotechâ RP2â
The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ 913 Kelated Metallicâ
A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
[img-12034-left-large_default]
Carbotech Brakes
Carbotech 2014-17 C7 Stingray & 2015-2017 Z06 Rear Brake Pad Set
from $173.00
Carbotech Brake Pads
Carbotech 2014-17 C7 Stingray & 2015-2017 Z06 Rear Brake Pad Set
How To Properly Bed In Carbotech Racing Brake Pads
Manufacturer: Carbotech
Manufacturer Part Number: CT1718
Material thickness of pad material and backing plate: .592" (15mm)
FMSI Number: D1718
Hawk interchange: HB727
[img-12147-left-large_default]
CARBOTECH BRAKE COMPOUNDS
Carbotechâ 1521â
The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use.
Carbotechâ AX6â
The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications.
Carbotechâ XP8â
A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers.
Carbotechâ XP10â
When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP12â
Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP20â
The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP24â
XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotechâ RP2â
The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ 913 Kelated Metallicâ
A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
The Carbotech 1718 is a popular pad used on many Corvette Models:
2014 CHEVROLET CORVETTE STING RAY WITH STANDARD JL9 BRAKE PACKAGE (2014)
2014 CHEVROLET CORVETTE STING RAY Z51 - J55 BRAKE PACKAGE - OE DESIGNED CO-CAST BRAKE ROTORS (2014)
2014 CHEVROLET CORVETTE STING RAY Z51 - J55 BRAKE PACKAGE - RE-DESIGNED FULL CAST BRAKE ROTORS FOR IMPROVED COOLING (2014)
2015 CHEVROLET CORVETTE STING RAY Z51 - J55 BRAKE PACKAGE - OE DESIGNED CO-CAST BRAKE ROTORS (2015)
2015 CHEVROLET CORVETTE STING RAY Z51 - J55 BRAKE PACKAGE - RE-DESIGNED FULL CAST BRAKE ROTORS FOR IMPROVED COOLING (2015)
2015 CHEVROLET CORVETTE HEAVY DUTY (2015)
2015 CHEVROLET CORVETTE NO SUBMODEL (2015)
2015 CHEVROLET CORVETTE Z06 (2015)
2016 CHEVROLET CORVETTE NO SUBMODEL (2016)
2016 CHEVROLET CORVETTE Z06 (2016)
2017 CHEVROLET CORVETTE NO SUBMODEL (2017)
2017 CHEVROLET CORVETTE Z06 (2017)
[img-12147-left-large_default]
Carbotech Brakes
Carbotech CT473 Brake Pads Ford & Mazda Front
from $172.00
Carbotech CT473 Brake Pads Ford & Mazda Front
Carbotech CT473 fits many Ford Escort, ZX2 and Mercury Tracers on the front axle. Available in Carbotech 1521, AX6, XP8, XP10 and XP12 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced.
How To Properly Bed In Carbotech Racing Brake Pads
Carbotech CT473 Brake Pads Ford & Mazda Front Details:
Manufacturer: Carbotech
Manufacturer Part Number: CT473
Material thickness of pad material and backing plate: .567" (14mm)
Hawk cross reference: HB246_567
CARBOTECH BRAKE COMPOUNDS
Carbotech 1521
The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use.
Carbotech AX6
The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications.
Carbotech XP8
A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers.
Carbotech XP10
When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotech XP12
Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech CT473 Brake Pads Ford & Mazda Front Axle Fitment:2003 FORD ZX2
2003 FORD Escort
2002 FORD ZX2
2002 FORD Escort
2001 FORD ZX2
2001 FORD Escort
2000 FORD ZX2
2000 FORD Escort
1999 MERCURY Tracer
1999 FORD ZX2
1999 FORD Escort
1998 MERCURY Tracer
1998 FORD ZX2
1998 FORD Escort
1997 MERCURY Tracer
1997 FORD Escort
1996 MERCURY Tracer
1996 MAZDA MX-3
1996 FORD Escort
1995 MERCURY Tracer
1995 MAZDA MX-3
1995 FORD Escort
1994 MERCURY Tracer
1994 MAZDA MX-3
1994 FORD Escort
1993 MAZDA MX-3
1992 MERCURY Tracer Rear Disc Brakes
1992 MAZDA MX-3
Carbotech Brakes
Carbotech CT817 Brake Pads - Toyota Celica - Scion tC
from $172.00
Carbotech CT817 Brake Pads
Carbotech CT817 brake pads are available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, and XP24 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced.
How To Properly Bed In Carbotech Racing Brake Pads
Carbotech CT817 Brake Pad Details:
Manufacturer: Carbotech
Manufacturer Part Number: CT817
Hawk cross reference: HB328_.685
Material thickness of friction material and backing plate: 17mm
Material thickness of friction material and backing plate: .685"
Carbotech Brake Compounds
Carbotechâ 1521â
The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use.
Carbotechâ AX6â
The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications.
Carbotechâ XP8â
A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers.
Carbotechâ XP10â
When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP12â
Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP20â
The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP24â
XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotechâ RP2â
The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ 913 Kelated Metallicâ
A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
Carbotech CT817 Front Brake Pad Fitment:
2010 Scion tC
2009 Scion tC
2008 Scion TC Spec
2008 Scion tC
2007 Scion TC Spec
2007 Scion tC
2006 Scion tC
2005 Toyota Celica Rear Drum Models
2005 Toyota Celica Rear Disc Models
2005 Toyota Celica GTS
2005 Toyota Celica GT
2005 Scion tC
2004 Toyota Celica Rear Drum Models
2004 Toyota Celica Rear Disc Models
2004 Toyota Celica GTS
2004 Toyota Celica GT
2003 Toyota Celica Rear Drum Models
2003 Toyota Celica Rear Disc Models
2003 Toyota Celica GTS
2003 Toyota Celica GT
2002 Toyota Celica Rear Drum Models
2002 Toyota Celica Rear Disc Models
2002 Toyota Celica GTS
2002 Toyota Celica GT
2001 Toyota Celica Rear Drum Models
2001 Toyota Celica Rear Disc Models
2001 Toyota Celica GTS
2000 Toyota Celica Rear Disc Models
Carbotech Brakes
Carbotech Mazda RX8 Front Brake Pads CT1009
from $172.00
Carbotech Mazda RX8 Front Brake Pads
Carbotech Race and Track Pads CT 1009 is a popular Mazda RX8 front Axle brake pad. Measuring 15mm thick and available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds
How To Properly Bed In Carbotech Racing Brake Pads
Carbotech Mazda RX8 Front Brake Pad Details:
Manufacturer: Carbotech
Manufacturer part number: CT1009
Most popular track combination: R10 Front, R8 Rear
G-Loc cross reference: GP1009
Hawk brake cross reference: HB470_.643
Material thickness of pad of backing plate and pad material: .643"
Material thickness of pad of backing plate and pad material: 16mm
[img-12160-left-large_default]
Carbotech Brake Compounds
Carbotechâ 1521â
The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use.
Carbotechâ AX6â
The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications.
Carbotechâ XP8â
A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers.
Carbotechâ XP10â
When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP12â
Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP20â
The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP24â
XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotechâ RP2â
The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ 913 Kelated Metallicâ
A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
Carbotech Mazda RX8 Front Brake Pads Fitment:
2004 MAZDA RX-8 WITH SPORT SUSPENSION (2004)
2004 MAZDA RX-8 WITH SPORT SUSPENSION #N/A (2004)
2004 MAZDA RX-8 WITHOUT SPORT SUSPENSION (2004)
2004 MAZDA RX-8 WITHOUT SPORT SUSPENSION #N/A (2004)
2005 MAZDA RX-8 WITH SPORT SUSPENSION (2005)
2005 MAZDA RX-8 WITH SPORT SUSPENSION #N/A (2005)
2005 MAZDA RX-8 WITHOUT SPORT SUSPENSION (2005)
2005 MAZDA RX-8 WITHOUT SPORT SUSPENSION #N/A (2005)
2006 MAZDA RX-8 WITH SPORT SUSPENSION (2006)
2006 MAZDA RX-8 WITH SPORT SUSPENSION #N/A (2006)
2006 MAZDA RX-8 WITHOUT SPORT SUSPENSION (2006)
2006 MAZDA RX-8 WITHOUT SPORT SUSPENSION #N/A (2006)
2007 MAZDA RX-8 WITH SPORT SUSPENSION (2007)
2007 MAZDA RX-8 WITH SPORT SUSPENSION #N/A (2007)
2007 MAZDA RX-8 WITHOUT SPORT SUSPENSION (2007)
2007 MAZDA RX-8 WITHOUT SPORT SUSPENSION #N/A (2007)
2008 MAZDA RX-8 WITH SPORT SUSPENSION (2008)
2008 MAZDA RX-8 WITH SPORT SUSPENSION #N/A (2008)
2008 MAZDA RX-8 WITHOUT SPORT SUSPENSION (2008)
2008 MAZDA RX-8 WITHOUT SPORT SUSPENSION #N/A (2008)
2009 MAZDA RX-8 NO SUBMODEL (2009)
2009 MAZDA RX-8 NO SUBMODEL #N/A (2009)
2010 MAZDA RX-8 NO SUBMODEL (2010)
2010 MAZDA RX-8 NO SUBMODEL #N/A (2010)
2011 MAZDA RX-8 NO SUBMODEL (2011)
2011 MAZDA RX-8 NO SUBMODEL #N/A (2011)
[img-12160-left-large_default]
Carbotech Brakes
Carbotech CT787 Brake Pads - Honda & Acura Front
from $172.00
Carbotech Brake Pads
How To Properly Bed In Carbotech Racing Brake Pads
Manufacturer: Carbotech
Manufacturer part number: CT787
Fits: Honda Applications from 1999-2014
Honda Accord and other front pads. Carbotech Brake Pads are available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds.
[img-12121-left-large_default]
Carbotech Brake Compounds
Carbotechâ 1521â
The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use.
Carbotechâ AX6â
The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications.
Carbotechâ XP8â
A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers.
Carbotechâ XP10â
When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP12â
Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP20â
The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP24â
XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotechâ RP2â
The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ 913 Kelated Metallicâ
A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
[img-7276-left-large_default]
Carbotech CT787 Brake Pads | Honda & Acura Fitment Guide:
1999 ACURA RL NO SUBMODEL (1999, 1999)
1999 ACURA RL NO SUBMODEL ALL (1999, 1999)
1999 ACURA TL NO SUBMODEL ALL (1999, 1999)
2000 ACURA RL NO SUBMODEL (2000, 2000)
2000 ACURA RL NO SUBMODEL ALL (2000, 2000)
2000 ACURA TL NO SUBMODEL ALL (2000, 2000)
2001 ACURA CL NO SUBMODEL ALL (2001, 2001)
2001 ACURA CL TYPE-S ALL (2001, 2001)
2001 ACURA RL NO SUBMODEL (2001, 2001)
2001 ACURA RL NO SUBMODEL ALL (2001, 2001)
2001 ACURA TL NO SUBMODEL ALL (2001, 2001)
2002 ACURA CL 45022S0KA11 (2002, 2002)
2002 ACURA RL NO SUBMODEL (2002, 2002)
2002 ACURA RL NO SUBMODEL ALL (2002, 2002)
2002 ACURA TL NO SUBMODEL ALL (2002, 2002)
2002 ACURA TL TYPE-S ALL (2002, 2002)
2003 ACURA CL 45022S0KA11 (2003, 2003)
2003 ACURA RL NO SUBMODEL (2003, 2003)
2003 ACURA RL NO SUBMODEL ALL (2003, 2003)
2003 ACURA TL NO SUBMODEL ALL (2003, 2003)
2003 ACURA TL TYPE-S ALL (2003, 2003)
2003 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2003, 2003)
2003 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2003, 2003)
2003 HONDA ACCORD SEDAN 6 CYLINDER (2003, 2003)
2004 ACURA RL NO SUBMODEL (2004, 2004)
2004 ACURA RL NO SUBMODEL ALL (2004, 2004)
2004 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2004, 2004)
2004 ACURA TSX NO SUBMODEL (2004, 2004)
2004 ACURA TSX NO SUBMODEL ALL (2004, 2004)
2004 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2004, 2004)
2004 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2004, 2004)
2004 HONDA ACCORD SEDAN 6 CYLINDER (2004, 2004)
2005 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2005, 2005)
2005 ACURA TSX NO SUBMODEL (2005, 2005)
2005 ACURA TSX NO SUBMODEL ALL (2005, 2005)
2005 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2005, 2005)
2005 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2005, 2005)
2005 HONDA ACCORD SEDAN 6 CYLINDER; EXCEPT HYBRID (2005, 2005)
2006 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2006, 2006)
2006 ACURA TSX NO SUBMODEL (2006, 2006)
2006 ACURA TSX NO SUBMODEL ALL (2006, 2006)
2006 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2006, 2006)
2006 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2006, 2006)
2006 HONDA ACCORD HYBRID V6 HYBRID (2006, 2006)
2006 HONDA ACCORD HYBRID, SEDAN 3.0L (2006, 2006)
2006 HONDA ACCORD SEDAN 6 CYLINDER; EXCEPT HYBRID (2006, 2006)
2006 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2006, 2006)
2007 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2007, 2007)
2007 ACURA TSX NO SUBMODEL (2007, 2007)
2007 ACURA TSX NO SUBMODEL ALL (2007, 2007)
2007 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2007, 2007)
2007 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2007, 2007)
2007 HONDA ACCORD HYBRID V6 HYBRID (2007, 2007)
2007 HONDA ACCORD HYBRID, SEDAN 3.0L (2007, 2007)
2007 HONDA ACCORD SEDAN 6 CYL; EXCEPT HYBRID (2007, 2007)
2007 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2007, 2007)
2008 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2008, 2008)
2008 ACURA TSX NO SUBMODEL (2008, 2008)
2008 ACURA TSX NO SUBMODEL ALL (2008, 2008)
2008 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2008, 2008)
2008 HONDA ACCORD EX, COUPE 2.4L (2008, 2008)
2008 HONDA ACCORD EX, COUPE 3.5L (2008, 2008)
2008 HONDA ACCORD EX, SEDAN 2.4L (2008, 2008)
2008 HONDA ACCORD EX, SEDAN 3.5L (2008, 2008)
2008 HONDA ACCORD SEDAN EX, EX-L (2008, 2008)
2008 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2008, 2008)
2009 ACURA TSX NO SUBMODEL ALL (2009, 2009)
2009 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2009, 2009)
2009 HONDA ACCORD EX, COUPE 2.4L (2009, 2009)
2009 HONDA ACCORD EX, COUPE 3.5L (2009, 2009)
2009 HONDA ACCORD EX, SEDAN 2.4L (2009, 2009)
2009 HONDA ACCORD EX, SEDAN 3.5L (2009, 2009)
2009 HONDA ACCORD SEDAN EX, EX-L (2009, 2009)
2009 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2009, 2009)
2010 ACURA TSX NO SUBMODEL ALL (2010, 2010)
2010 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2010, 2010)
2010 HONDA ACCORD EX, COUPE 2.4L (2010, 2010)
2010 HONDA ACCORD EX, COUPE 3.5L (2010, 2010)
2010 HONDA ACCORD EX, SEDAN 2.4L (2010, 2010)
2010 HONDA ACCORD EX, SEDAN 3.5L (2010, 2010)
2010 HONDA ACCORD SEDAN EX, EX-L (2010, 2010)
2010 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2010, 2010)
2011 ACURA TSX NO SUBMODEL ALL (2011, 2011)
2011 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2011, 2011)
2011 HONDA ACCORD EX, COUPE 2.4L (2011, 2011)
2011 HONDA ACCORD EX, COUPE 3.5L (2011, 2011)
2011 HONDA ACCORD EX, SEDAN 2.4L (2011, 2011)
2011 HONDA ACCORD EX, SEDAN 3.5L (2011, 2011)
2011 HONDA ACCORD SEDAN EX, EX-L (2011, 2011)
2011 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2011, 2011)
2012 ACURA TSX NO SUBMODEL ALL (2012, 2012)
2012 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2012, 2012)
2012 HONDA ACCORD EX, COUPE 2.4L (2012, 2012)
2012 HONDA ACCORD EX, COUPE 3.5L (2012, 2012)
2012 HONDA ACCORD EX, SEDAN 2.4L (2012, 2012)
2012 HONDA ACCORD EX, SEDAN 3.5L (2012, 2012)
2012 HONDA ACCORD SEDAN EX, EX-L (2012, 2012)
2013 ACURA TSX NO SUBMODEL ALL (2013, 2013)
2014 ACURA TSX NO SUBMODEL ALL (2014, 2014)
[img-12121-left-large_default]
Carbotech Brakes
Carbotech 1999-2001 Subaru Impreza RS Front Pads
from $172.00
Carbotech Brake Pads
How To Properly Bed In Carbotech Racing Brake Pads
Manufacturer: Carbotech
Manufacturer part number: CT721
Fits: 1999-2001 Subaru Impreza RS
Does NOT Fit: Subaru Impreza base or other then trim level, this is a special RS pad
Brake Compounds
Carbotechâ 1521â
The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use.
Carbotechâ AX6â
The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications.
Carbotechâ XP8â
A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers.
Carbotechâ XP10â
When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP12â
Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP20â
The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP24â
XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotechâ RP2â
The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ 913 Kelated Metallicâ
A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
Carbotech Brakes
Carbotech CT240 Rear Brake Pad - 82-85 Toyota Celica GTS
from $172.00
Carbotech Brake Pads
1982-1985 Toyota Celica GTS Rear Axle Carbotech Brake Pads, the Carbotech CT240 available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. Front. AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds.
How To Properly Bed In Carbotech Racing Brake Pads
Manufacturer: Carbotech
Manufacturer part number: CT240
Brake Compounds
Carbotechâ 1521â
The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use.
Carbotechâ AX6â
The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications.
Carbotechâ XP8â
A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers.
Carbotechâ XP10â
When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP12â
Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP20â
The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP24â
XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotechâ RP2â
The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ 913 Kelated Metallicâ
A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
Carbotech Brakes
Carbotech CT245 Front Brake Pad - 82-85 Toyota Celica
from $172.00
Carbotech Brake Pads
1982-1985 Toyota Celica Front Axle Carbotech Brake Pads, CT245 available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. Front. AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds.
[img-12094-left-large_default]
How To Properly Bed In Carbotech Racing Brake Pads
Manufacturer: Carbotech
Manufacturer part number: CT245
[img-12094-left-large_default]
Brake Compounds
Carbotechâ 1521â
The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use.
Carbotechâ AX6â
The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications.
Carbotechâ XP8â
A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers.
Carbotechâ XP10â
When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP12â
Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP20â
The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP24â
XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotechâ RP2â
The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ 913 Kelated Metallicâ
A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
[img-12094-left-large_default]
Carbotech Brakes
Carbotech CT460 Front Brake Pad Set
from $170.00
Carbotech CT460 Subaru Front Brake Pad Set
Fitting many Subaru front axle applications, the Carbotech CT460 brake pad set is available in AX6, XP8, XP10, XP12, and RP2 compounds to be ready for every type of driving, from spirited daily driving to the deepest of braking at Road Atlanta turn 10.
Carbotech CT460 Subaru Front Brake Pad Set Details:
Manufacturer: Carbotech
Manufacturer part number: CT460
Compounds available: 1521, XP6, XP8, XP10, XP12, XP20, XP24, RP2
Carbotechâ 1521â
The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use.
Carbotechâ AX6â
The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications.
Carbotechâ XP8â
A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers.
Carbotechâ XP10â
When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP12â
Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP20â
The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP24â
XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotechâ RP2â
The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech Brakes
Carbotech CT430 Nissan 350Z, Sentra SE-R, Spec-V Front Pad Set
from $170.00
Carbotech CT430 Nissan 350Z, Sentra SE-R, Spec-V Front Pad Set
Carbotech Nissan 2002-2005 350Z with standard (non-Brembo) brakes, Sentra SE-R, Spec-V Front Pad Set pads in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds.
How To Properly Bed In Carbotech Racing Brake Pads
Manufacturer: Carbotech
Manufacturer Part Number: CT430
Carbotech Brake Compounds
Carbotechâ 1521â
The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use.
Carbotechâ AX6â
The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications.
Carbotechâ XP8â
A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers.
Carbotechâ XP10â
When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP12â
Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP20â
The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ XP24â
XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotechâ RP2â
The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotechâ 913 Kelated Metallicâ
A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
Carbotech CT430 Nissan 350Z, Sentra SE-R, Spec-V Front Pad Set Fitment:
1989 NISSAN MAXIMA NO SUBMODEL (1989)
1989 NISSAN MAXIMA NO SUBMODEL #N/A (1989)
1989 NISSAN MAXIMA NO SUBMODEL ALL (1989)
1989 NISSAN SKYLINE GTS R32 ALL (1989)
1990 NISSAN MAXIMA NO SUBMODEL (1990)
1990 NISSAN MAXIMA NO SUBMODEL #N/A (1990)
1990 NISSAN MAXIMA NO SUBMODEL ALL (1990)
1990 NISSAN SKYLINE GTS R32 ALL (1990)
1991 NISSAN MAXIMA NO SUBMODEL (1991)
1991 NISSAN MAXIMA NO SUBMODEL #N/A (1991)
1991 NISSAN MAXIMA SE ALL (1991)
1991 NISSAN SKYLINE GTS R32 ALL (1991)
1992 NISSAN MAXIMA GXE ALL (1992)
1992 NISSAN MAXIMA NO SUBMODEL (1992)
1992 NISSAN MAXIMA NO SUBMODEL #N/A (1992)
1992 NISSAN MAXIMA SE ALL (1992)
1992 NISSAN SKYLINE GTS R32 ALL (1992)
1993 NISSAN ALTIMA GLE 2.4L (1993)
1993 NISSAN ALTIMA GXE 2.4L (1993)
1993 NISSAN ALTIMA NO SUBMODEL (1993)
1993 NISSAN ALTIMA NO SUBMODEL #N/A (1993)
1993 NISSAN ALTIMA SE 2.4L (1993)
1993 NISSAN ALTIMA XE 2.4L (1993)
1993 NISSAN MAXIMA GXE ALL (1993)
1993 NISSAN MAXIMA NO SUBMODEL (1993)
1993 NISSAN MAXIMA NO SUBMODEL #N/A (1993)
1993 NISSAN MAXIMA SE ALL (1993)
1993 NISSAN SKYLINE GTS R32 ALL (1993)
1994 NISSAN ALTIMA GLE 2.4L (1994)
1994 NISSAN ALTIMA GXE 2.4L (1994)
1994 NISSAN ALTIMA NO SUBMODEL (1994)
1994 NISSAN ALTIMA NO SUBMODEL #N/A (1994)
1994 NISSAN ALTIMA SE 2.4L (1994)
1994 NISSAN ALTIMA XE 2.4L (1994)
1994 NISSAN MAXIMA GXE ALL (1994)
1994 NISSAN MAXIMA NO SUBMODEL (1994)
1994 NISSAN MAXIMA NO SUBMODEL #N/A (1994)
1994 NISSAN MAXIMA SE ALL (1994)
1994 NISSAN SKYLINE GTS R32 ALL (1994)
1995 NISSAN ALTIMA GLE 2.4L (1995)
1995 NISSAN ALTIMA GXE 2.4L (1995)
1995 NISSAN ALTIMA NO SUBMODEL (1995)
1995 NISSAN ALTIMA NO SUBMODEL #N/A (1995)
1995 NISSAN ALTIMA SE 2.4L (1995)
1995 NISSAN ALTIMA XE 2.4L (1995)
1995 NISSAN MAXIMA GLE ALL (1995)
1995 NISSAN MAXIMA GXE ALL (1995)
1995 NISSAN MAXIMA NO SUBMODEL (1995)
1995 NISSAN MAXIMA NO SUBMODEL #N/A (1995)
1995 NISSAN MAXIMA SE ALL (1995)
1995 NISSAN SKYLINE GTS R32 ALL (1995)
1996 INFINITI I30 NO SUBMODEL (1996)
1996 INFINITI I30 NO SUBMODEL #N/A (1996)
1996 NISSAN ALTIMA GLE 2.4L (1996)
1996 NISSAN ALTIMA GXE 2.4L (1996)
1996 NISSAN ALTIMA NO SUBMODEL (1996)
1996 NISSAN ALTIMA NO SUBMODEL #N/A (1996)
1996 NISSAN ALTIMA SE 2.4L (1996)
1996 NISSAN ALTIMA XE 2.4L (1996)
1996 NISSAN MAXIMA GLE ALL (1996)
1996 NISSAN MAXIMA GXE ALL (1996)
1996 NISSAN MAXIMA NO SUBMODEL (1996)
1996 NISSAN MAXIMA NO SUBMODEL #N/A (1996)
1996 NISSAN MAXIMA SE ALL (1996)
1997 INFINITI I30 NO SUBMODEL (1997)
1997 INFINITI I30 NO SUBMODEL #N/A (1997)
1997 NISSAN ALTIMA GLE 2.4L (1997)
1997 NISSAN ALTIMA GXE 2.4L (1997)
1997 NISSAN ALTIMA NO SUBMODEL (1997)
1997 NISSAN ALTIMA NO SUBMODEL #N/A (1997)
1997 NISSAN ALTIMA SE 2.4L (1997)
1997 NISSAN ALTIMA XE 2.4L (1997)
1997 NISSAN MAXIMA GLE ALL (1997)
1997 NISSAN MAXIMA GXE ALL (1997)
1997 NISSAN MAXIMA NO SUBMODEL (1997)
1997 NISSAN MAXIMA NO SUBMODEL #N/A (1997)
1997 NISSAN MAXIMA SE ALL (1997)
1998 INFINITI I30 NO SUBMODEL (1998)
1998 INFINITI I30 NO SUBMODEL #N/A (1998)
1998 NISSAN ALTIMA NO SUBMODEL (1998)
1998 NISSAN ALTIMA NO SUBMODEL #N/A (1998)
1998 NISSAN ALTIMA NO SUBMODEL 2.4L (1998)
1998 NISSAN MAXIMA GLE ALL (1998)
1998 NISSAN MAXIMA GXE ALL (1998)
1998 NISSAN MAXIMA NO SUBMODEL (1998)
1998 NISSAN MAXIMA NO SUBMODEL #N/A (1998)
1998 NISSAN MAXIMA SE ALL (1998)
1999 INFINITI G20 NO SUBMODEL (1999)
1999 INFINITI G20 NO SUBMODEL #N/A (1999)
1999 INFINITI I30 NO SUBMODEL (1999)
1999 INFINITI I30 NO SUBMODEL #N/A (1999)
1999 NISSAN ALTIMA NO SUBMODEL (1999)
1999 NISSAN ALTIMA NO SUBMODEL #N/A (1999)
1999 NISSAN ALTIMA NO SUBMODEL 2.4L (1999)
1999 NISSAN MAXIMA FROM 4/1999 (1999)
1999 NISSAN MAXIMA FROM 4/1999 #N/A (1999)
1999 NISSAN MAXIMA TO 3/1999 (1999)
1999 NISSAN MAXIMA TO 3/1999 #N/A (1999)
1999 NISSAN MAXIMA GLE ALL (1999)
1999 NISSAN MAXIMA GXE ALL (1999)
1999 NISSAN MAXIMA SE ALL (1999)
2000 INFINITI G20 TO 11/00 (2000)
2000 INFINITI G20 TO 11/00 #N/A (2000)
2000 INFINITI I30 TO 10/00 (2000)
2000 INFINITI I30 TO 10/00 #N/A (2000)
2000 INFINITI I30 FRONT FROM 06/2000 410602Y990 (2000)
2000 INFINITI I30 FRONT TO 06/2000 410602Y091 (2000)
2000 NISSAN ALTIMA NO SUBMODEL (2000)
2000 NISSAN ALTIMA NO SUBMODEL #N/A (2000)
2000 NISSAN ALTIMA NO SUBMODEL 2.4L (2000)
2000 NISSAN MAXIMA NO SUBMODEL (2000)
2000 NISSAN MAXIMA NO SUBMODEL #N/A (2000)
2000 NISSAN MAXIMA NO SUBMODEL ALL (2000)
2000 NISSAN SENTRA MODELS WITH REAR DISC BRAKES - MFG AFTER 1/2000 (2000)
2000 NISSAN SENTRA MODELS WITH REAR DISC BRAKES - MFG AFTER 1/2000 #N/A (2000)
2001 INFINITI G20 FROM 12/00 (2001)
2001 INFINITI G20 FROM 12/00 #N/A (2001)
2001 INFINITI I30 FROM 11/00 (2001)
2001 INFINITI I30 FROM 11/00 #N/A (2001)
2001 INFINITI I30 REAR FROM 10/2000 410602Y091 (2001)
2001 NISSAN ALTIMA NO SUBMODEL (2001)
2001 NISSAN ALTIMA NO SUBMODEL #N/A (2001)
2001 NISSAN ALTIMA NO SUBMODEL 2.4L (2001)
2001 NISSAN MAXIMA FROM 10/2000 (2001)
2001 NISSAN MAXIMA FROM 10/2000 #N/A (2001)
2001 NISSAN MAXIMA TO 10/2000 (2001)
2001 NISSAN MAXIMA TO 10/2000 #N/A (2001)
2001 NISSAN MAXIMA NO SUBMODEL ALL (2001)
2001 NISSAN SENTRA MODELS WITH REAR DISC BRAKES - MFG AFTER 6/2001 (2001)
2001 NISSAN SENTRA MODELS WITH REAR DISC BRAKES - MFG AFTER 6/2001 #N/A (2001)
2001 NISSAN SENTRA MODELS WITH REAR DISC BRAKES - MFG UP TO 6/2001 (2001)
2001 NISSAN SENTRA MODELS WITH REAR DISC BRAKES - MFG UP TO 6/2001 #N/A (2001)
2002 INFINITI G20 FROM 12/00 (2002)
2002 INFINITI G20 FROM 12/00 #N/A (2002)
2002 INFINITI I35 NO SUBMODEL (2002)
2002 INFINITI I35 NO SUBMODEL #N/A (2002)
2002 NISSAN ALTIMA 410608J090 (2002)
2002 NISSAN MAXIMA 41060AU091 (2002)
2002 NISSAN SENTRA MODELS WITH REAR DISC BRAKES (2002)
2002 NISSAN SENTRA MODELS WITH REAR DISC BRAKES #N/A (2002)
2003 INFINITI G35 STANDARD BRAKES (2003)
2003 INFINITI G35 STANDARD BRAKES #N/A (2003)
2003 INFINITI I35 NO SUBMODEL (2003)
2003 INFINITI I35 NO SUBMODEL #N/A (2003)
2003 NISSAN 350Z W/O BREMBO BRAKES. W/O 18 IN. WHEELS ALL (2003)
2003 NISSAN 350Z WITH STANDARD BRAKES (2003)
2003 NISSAN 350Z WITH STANDARD BRAKES #N/A (2003)
2003 NISSAN ALTIMA 410608J090 (2003)
2003 NISSAN MAXIMA 410605Y790 (2003)
2003 NISSAN SENTRA MODELS WITH REAR DISC BRAKES - EXC. SE-R SPEC V (2003)
2003 NISSAN SENTRA MODELS WITH REAR DISC BRAKES - EXC. SE-R SPEC V #N/A (2003)
2004 INFINITI G35 RWD - STANDARD BRAKES (2004)
2004 INFINITI G35 RWD - STANDARD BRAKES #N/A (2004)
2004 INFINITI G35 X AWD #N/A (2004)
2004 INFINITI G35 X AWD (2004)
2004 INFINITI I35 NO SUBMODEL (2004)
2004 INFINITI I35 NO SUBMODEL #N/A (2004)
2004 NISSAN 350Z W/O BREMBO BRAKES. W/O 18 IN. WHEELS ALL (2004)
2004 NISSAN 350Z WITH STANDARD BRAKES (2004)
2004 NISSAN 350Z WITH STANDARD BRAKES #N/A (2004)
2004 NISSAN ALTIMA 410608J090 (2004)
2004 NISSAN SENTRA DISC 1.8L (2004)
2004 NISSAN SENTRA DISC 2.5L (2004)
2004 NISSAN SENTRA MODELS WITH REAR DISC BRAKES - EXC. SE-R SPEC V (2004)
2004 NISSAN SENTRA MODELS WITH REAR DISC BRAKES - EXC. SE-R SPEC V #N/A (2004)
2005 INFINITI G35 X AWD #N/A (2005)
2005 INFINITI G35 X AWD (2005)
2005 NISSAN 350Z W/O BREMBO BRAKES. W/O 18 IN. WHEELS ALL (2005)
2005 NISSAN 350Z WITH STANDARD BRAKES (2005)
2005 NISSAN 350Z WITH STANDARD BRAKES #N/A (2005)
2005 NISSAN ALTIMA 410608J090 (2005)
2005 NISSAN SENTRA MODELS WITH REAR DISC BRAKES - EXC. SE-R SPEC V (2005)
2005 NISSAN SENTRA MODELS WITH REAR DISC BRAKES - EXC. SE-R SPEC V #N/A (2005)
2006 NISSAN ALTIMA 41060ZB590 (2006)
2006 NISSAN SENTRA MODELS WITH REAR DISC BRAKES - EXC. SE-R SPEC V (2006)
2006 NISSAN SENTRA MODELS WITH REAR DISC BRAKES - EXC. SE-R SPEC V #N/A (2006)
2007 NISSAN ALTIMA NO SUBMODEL (2007)
2007 NISSAN ALTIMA NO SUBMODEL #N/A (2007)
2007 NISSAN ALTIMA NO SUBMODEL ALL (2007)
2007 NISSAN SENTRA 2.0L; W/REAR DRUMS (2007)
2007 NISSAN SENTRA 2.0L; W/REAR DRUMS #N/A (2007)
2007 NISSAN SENTRA 2.5L; EXCEPT SE-R SPEC V (2007)
2007 NISSAN SENTRA 2.5L; EXCEPT SE-R SPEC V #N/A (2007)
2007 NISSAN SENTRA NO SUBMODEL ALL (2007)
2007 NISSAN SENTRA SE-R ALL (2007)
2007 NISSAN VERSA S ALL (2007)
2007 NISSAN VERSA SL ALL (2007)
2007 SUZUKI SX4 5581080J00 (2007)
2007 SUZUKI SX4 (CANADIAN) 5581080J00 (2007)
2008 NISSAN ALTIMA NO SUBMODEL (2008)
2008 NISSAN ALTIMA NO SUBMODEL #N/A (2008)
2008 NISSAN ALTIMA NO SUBMODEL ALL (2008)
2008 NISSAN SENTRA 2.0L; W/REAR DRUMS (2008)
2008 NISSAN SENTRA 2.0L; W/REAR DRUMS #N/A (2008)
2008 NISSAN SENTRA 2.5L; EXCEPT SE-R SPEC V (2008)
2008 NISSAN SENTRA 2.5L; EXCEPT SE-R SPEC V #N/A (2008)
2008 NISSAN SENTRA NO SUBMODEL ALL (2008)
2008 NISSAN SENTRA SE-R ALL (2008)
2008 NISSAN VERSA D1060EM30A (2008)
2008 NISSAN VERSA S NON-ABS ALL (2008)
2008 NISSAN VERSA S YESN-ABS ALL (2008)
2008 NISSAN VERSA SL NON-ABS ALL (2008)
2008 NISSAN VERSA SL YESN-ABS ALL (2008)
2008 SUZUKI SX4 5581080J00 (2008)
2008 SUZUKI SX4 (CANADIAN) 5581080J00 (2008)
2009 NISSAN ALTIMA NO SUBMODEL (2009)
2009 NISSAN ALTIMA NO SUBMODEL #N/A (2009)
2009 NISSAN ALTIMA NO SUBMODEL ALL (2009)
2009 NISSAN CUBE NO SUBMODEL ALL (2009)
2009 NISSAN SENTRA 2.0L; W/REAR DRUMS (2009)
2009 NISSAN SENTRA 2.0L; W/REAR DRUMS #N/A (2009)
2009 NISSAN SENTRA 2.5L; EXCEPT SE-R SPEC V (2009)
2009 NISSAN SENTRA 2.5L; EXCEPT SE-R SPEC V #N/A (2009)
2009 NISSAN SENTRA NO SUBMODEL ALL (2009)
2009 NISSAN SENTRA SE-R ALL (2009)
2009 NISSAN VERSA 1.8 LITER D1060EM30A (2009)
2009 NISSAN VERSA S 1.8L (2009)
2009 NISSAN VERSA SL 1.8L (2009)
2009 SUZUKI SX4 5581080J01 (2009)
2009 SUZUKI SX4 AWD 5581080J01 (2009)
2009 SUZUKI SX4 AWD ALL (2009)
2009 SUZUKI SX4 NO SUBMODEL ALL (2009)
2010 NISSAN ALTIMA NO SUBMODEL (2010)
2010 NISSAN ALTIMA NO SUBMODEL #N/A (2010)
2010 NISSAN ALTIMA NO SUBMODEL ALL (2010)
2010 NISSAN CUBE NO SUBMODEL ALL (2010)
2010 NISSAN SENTRA 2.0L; W/REAR DRUMS (2010)
2010 NISSAN SENTRA 2.0L; W/REAR DRUMS #N/A (2010)
2010 NISSAN SENTRA 2.5L; EXCEPT SE-R SPEC V (2010)
2010 NISSAN SENTRA 2.5L; EXCEPT SE-R SPEC V #N/A (2010)
2010 NISSAN SENTRA SE-R W/CVT TRANS ALL (2010)
2010 NISSAN VERSA 1.8 LITER D1060EM30A (2010)
2010 NISSAN VERSA S 1.8L (2010)
2010 NISSAN VERSA SL 1.8L (2010)
2010 SUZUKI SX4 5581080J01 (2010)
2010 SUZUKI SX4 AWD 5581080J01 (2010)
2010 SUZUKI SX4 AWD ALL (2010)
2010 SUZUKI SX4 NO SUBMODEL ALL (2010)
2011 NISSAN ALTIMA NO SUBMODEL (2011)
2011 NISSAN ALTIMA NO SUBMODEL #N/A (2011)
2011 NISSAN ALTIMA NO SUBMODEL ALL (2011)
2011 NISSAN CUBE NO SUBMODEL ALL (2011)
2011 NISSAN JUKE NO SUBMODEL ALL (2011)
2011 NISSAN SENTRA 2.0L; W/REAR DRUMS (2011)
2011 NISSAN SENTRA 2.0L; W/REAR DRUMS #N/A (2011)
2011 NISSAN SENTRA 2.5L; EXCEPT SE-R SPEC V (2011)
2011 NISSAN SENTRA 2.5L; EXCEPT SE-R SPEC V #N/A (2011)
2011 NISSAN SENTRA SE-R W/CVT TRANS ALL (2011)
2011 NISSAN VERSA 1.8 LITER D1060EM30A (2011)
2011 NISSAN VERSA S 1.8L (2011)
2011 NISSAN VERSA SL 1.8L (2011)
2011 RENAULT SAFRANE (LATIN AMERICA) ALL (2011)
2011 RENAULT SAFRANE (LATIN AMERICA) 4811152110K1 (2011)
2011 SUZUKI SX4 5581080J01 (2011)
2011 SUZUKI SX4 AWD 5581080J01 (2011)
2011 SUZUKI SX4 AWD ALL (2011)
2011 SUZUKI SX4 NO SUBMODEL ALL (2011)
2012 NISSAN ALTIMA NO SUBMODEL (2012)
2012 NISSAN ALTIMA NO SUBMODEL #N/A (2012)
2012 NISSAN ALTIMA NO SUBMODEL ALL (2012)
2012 NISSAN CUBE NO SUBMODEL ALL (2012)
2012 NISSAN JUKE NO SUBMODEL ALL (2012)
2012 NISSAN SENTRA 2.0L; W/REAR DRUMS (2012)
2012 NISSAN SENTRA 2.0L; W/REAR DRUMS #N/A (2012)
2012 NISSAN SENTRA 2.5L; EXCEPT SE-R SPEC V (2012)
2012 NISSAN SENTRA 2.5L; EXCEPT SE-R SPEC V #N/A (2012)
2012 NISSAN SENTRA W/REAR DRUM BRAKES. ALL (2012)
2012 NISSAN SENTRA SE-R W/CVT TRANS ALL (2012)
2012 NISSAN VERSA 1.8 LITER D1060EM30A (2012)
2012 NISSAN VERSA S 1.8L (2012)
2012 NISSAN VERSA SL 1.8L (2012)
2012 RENAULT SAFRANE (LATIN AMERICA) ALL (2012)
2012 SUZUKI SX4 5581080J01 (2012)
2012 SUZUKI SX4 AWD 5581080J01 (2012)
2012 SUZUKI SX4 AWD ALL (2012)
2012 SUZUKI SX4 NO SUBMODEL ALL (2012)
2013 NISSAN ALTIMA COUPE (2013)
2013 NISSAN ALTIMA COUPE #N/A (2013)
2013 NISSAN ALTIMA COUPE ALL (2013)
2013 NISSAN CUBE NO SUBMODEL ALL (2013)
2013 NISSAN JUKE NO SUBMODEL ALL (2013)
2013 NISSAN SENTRA 2.0L; W/REAR DRUMS (2013)
2013 NISSAN SENTRA 2.0L; W/REAR DRUMS #N/A (2013)
2013 NISSAN SENTRA 2.5L; EXCEPT SE-R SPEC V (2013)
2013 NISSAN SENTRA 2.5L; EXCEPT SE-R SPEC V #N/A (2013)
2013 NISSAN SENTRA W/REAR DISC ALL (2013)
2013 SUZUKI SX4 5581080J01 (2013)
2013 SUZUKI SX4 AWD 5581080J01 (2013)
2013 SUZUKI SX4 AWD ALL (2013)
2013 SUZUKI SX4 NO SUBMODEL ALL (2013)
2014 NISSAN ALTIMA (MEXICO) (2014)
2014 NISSAN CUBE NO SUBMODEL ALL (2014)
2014 NISSAN JUKE D10609AJ0A (2014)
2014 NISSAN JUKE NO SUBMODEL ALL (2014)
2014 NISSAN SENTRA D1060EM30C (2014)
2015 NISSAN JUKE D10609AJ0A (2015)
2015 NISSAN SENTRA D1060EM30C (2015)
2016 NISSAN JUKE NO SUBMODEL (2016)
