Stilo
Stilo Bottom Rubber Trim for ST5, CMR, and KRT
$12.50
Stilo Bottom Rubber Trim for ST5, CMR, and KRT
Did you put your Stilo helmet on your Hans device then then in your helmet bag? After a while, the Hans grip material will start to wear through the Stilo bottom rubber seal. One way to prevent this is to place a towel between your Hans device and your helmet so keep the abrasion to a minimum. If you have not been doing this, the this Stilo Replacement Rubber Seal For the Bottom of Your Stilo Helmet is the fix. Fits all Stilo SA2010 and SA2015 helmets. This is a Genuine Stilo Part for a perfect fit.
Stilo Bottom Rubber Trim for ST5, CMR, and KRT Details:
Manufacturer: Stilo
Manufacturer new part number: YA0874
Fitment: ST5, CMR and KRT Helmets
In general, YA0660 is the eye port rubber for all ST5 except ABP. YA0874 can be used on all helmets both auto and karting.
Stilo
Stilo ST5 Top Ram Air Vent Kit
$52.53
Stilo ST5 Top Ram Air Vent Kit
Force cool air into your helmet with The Stilo ST5 Top Ram Air Vent Kit . Every formula car, open wheel and kart racer puts this hi-impact ABS clear ram air vent on. Does it work? Just jump out of the draft and feel the rush of cool air as you make that offline last corner pass.
Stilo ST5 Top Ram Air Vent Kit Details:
Manufacturer: Stilo
Manufacturer part number: YA0822
Qty in kit: two (sold as a pair)
Material: Impact Plastic
Attaches how: 3M VHB 2 Sided Tape
Fits all Stilo ST5 Helmets: Yes
Fits Stilo ST4 Helmets: No, Use Stilo YA0620 ST4 Ram Air Intake Kit
For those customers in open cockpit cars, some additional aerodynamics may be desired by the driver. We offer a Top air vent to help move the cool air into the helmet, a rear spoiler for stability and slight downforce, as well as a vent blockoff kit to allow for more control of the airflow inside the helmet.
All pieces are made of clear plastic, and easily adhere with double-sided adhesive tape (pre-installed).
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo Pivot Kit ST5 Shield Only Aluminum
$49.95
$64.95
Stilo ST5 Shield Pivot Kit In Aluminum
Stilo ST5 replacement shield pivot kit for all Stilo ST5 helmets in natural aluminum. This is the same pivot kit that came standard on all Stilo ST5 Composite, Offshore, Carbon, 8860 and 8860 Zero helmets. Comprising of both the special Stilo knurled pivot screw and machined washer, this kit will stop the "drooping visor" that may happen after years of racing.
Stilo ST5 Pivot Kit For Shield Only in Aluminum Details:
Manufacturer: Stilo
Manufacturer part number: YA0817
Fitment: Stilo ST5 all versions
Color: Natural Aluminum
Stilo
Stilo Seal Visor Rubber ST5, ST4 F and ST4 GTW
$29.95
Stilo Seal Visor Rubber ST5, ST4 F and ST4 GTW
Replacement rubber seal for your Stilo helmet visor that fits ST5, ST4 F and ST4 GTW style helmets. This Genuine Stilo part fits the eyeport seal of all modern Stilo full face helmets.
Stilo Seal Visor Rubber ST5, ST4 F and ST4 GTW Details:
Manufacturer: Stilo
Manufacturer part number: YA0660
Fitment: ST4F All Models, ST4W All Models, Stilo ST5 Models, Trophy and WRC, SA2010, SA2015, FIA 8858, FIA 8859, FIA 8860
In general, YA0660 is the eye port rubber for all ST5 except ABP. YA0874 can be used on all helmets both auto and karting.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo Pivot Kit ST5 Shield Only Blue
$49.95
$64.95
Stilo ST5 Shield Pivot Kit In Blue
Stilo ST5 replacement shield pivot kit for all Stilo ST5 helmets in blue. This is the same pivot kit that comes standard on all Stilo ST5 Composite, Offshore, Carbon, 8860, and 8860 Zero helmets but with deep blue anodizing. Comprised of both the special Stilo knurled pivot screw and machined washer, this kit will stop the "drooping visor" that may happen after years of racing.
Stilo ST5 Pivot Kit For Shield Only in Blue Details:
Manufacturer: Stilo
Manufacturer part number: YA0817B
Fitment: Stilo ST5 all versions
Color: Blue
[img-10741-left-large_default]
Stilo
Stilo ST5 Front Spoiler Kit
$52.53
Stilo ST5 Front Spoiler Kit
For Open Cockpit Racers, The Stilo ST5 Front Spoiler stabilizes your helmet and stops buffeting and lifting at high speeds. Used in WKA kart racing to compensate for the extreme upright seats some kart racers have.
For those customers in open cockpit cars, some additional aerodynamics may be desired by the driver. We offer a front spoiler to help split air around the helmet. No more helmet lifting and instability under the highest speeds in a car with questionable driver aero.
All pieces are made of clear plastic, and adhere with double-sided adhesive tape.
Stilo ST5 Front Spoiler Kit Details:
Manufacturer: Stilo
Manufacturer part number: YA0823
Reduce Helmet Buffeting
Removable
Fits All Stilo ST5 Models
Can be painted
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo Ear Pillows for ST4 and ST5
$34.95
$49.95
Stilo Ear Pillows for ST4 and ST5
Stilo Spare Ear Pillows for ST4 and ST5
Details:
Manufacturer: Stilo
Manufacturer new part number: YA0016
Fitment: All ST4 and ST5 helmets
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo Pivot Kit ST5 Shield Only Gold
$49.95
$64.95
Stilo ST5 Shield Pivot Kit In Gold
Stilo ST5 replacement shield pivot kit for all Stilo ST5 helmets in gold. This is the same pivot kit that came standard on all Stilo ST5 Composite, Offshore, Carbon, 8860 and 8860 Zero helmets but with deep gold anodizing. Comprising of both the special Stilo knurled pivot screw and machined washer, this kit will stop the "drooping visor" that may happen after years of racing.
Stilo ST5 Pivot Kit For Shield Only in Gold Details:
Manufacturer: Stilo
Manufacturer part number: YA0817G
Fitment: Stilo ST5 all versions
Color: Gold
[img-10740-left-large_default]
Stilo
Stilo Pivot Kit ST5 Shield and Peak
$64.95
Stilo ST5 Shield and Peak Pivot Kit
The Stilo ST5 Shield and Peak Pivot Kit allows a Stilo Peak Visor and Shield to be used together on all ST5 helmets. The visor will have to be able to open and close and the peak visor can be adjusted to the perfect angle to keep the sun out of your eyes. Stilo has a reputation for excellence and the ST5 peak and visor kit will not disappoint. Remember, if you are using a shield in combination with a visor, ( Stilo ST5 Short Sun Visor or other visors of your choice ) it is recommended that you order this kit for the visor and shield to all go on a Stilo helmet.
Stilo ST5 Shield and Peak Pivot Kit
Manufacturer: Stilo
Manufacturer part number: YA0864
Fitment: Stilo ST5 versions
Stilo
Stilo Carbon Peak Visors ST5 Helmets
$246.95
Stilo ST5 Carbon Peak Visors
Introducing the Stilo ST5 8860 Carbon Peak, the perfect accessory to enhance your racing experience. Designed as an optional extra for FIA8860 ST5 helmets, this peak is FIA approved and offers both style and functionality on the track. Similar to the bill of a ball cap, the ST5 Peak Visor by Stilo is effective at blocking the sunlight from your eyes. The peak visor can be adjusted to the angle of the sun throughout the day. Fitted for the SA2020 Stilo ST5 models, the ST5 peak is the perfect visor for keeping the sun out of your eyes.
Stilo ST5 Peak Visors Details:
Manufacturer: Stilo
Fits Stilo ST5: Yes
Stilo SKU YA0862 Gloss Carbon Fiber (FIA 8859 weave)
Stilo SKU YA0863 Gloss Carbon Fiber (FIA 8860 weave)