Roll Bars and Roll Cages

CMS Performance Bolt-In Roll Bar For Gen 5 Chevy Camaro (2010-2015) This Roll Bar Fits the Following Cars: Chevrolet Camaro, Gen 5 (2010-2015), all coupes Does not fit convertible THE STRONGEST ROLL BAR AVAILABLE FOR THE GEN 5 CAMARO Click Here for Installation Instructions The CMS Performance Camaro Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market. In designing the Camaro roll bar, safety, strength, and structural integrity were the primary goals. Fully TIG welded from Docol R8 Advanced High-Strength Steel allows CMS Performance to design a roll bar that is stronger and lighter! Our innovative design maximizes the room for the factory Recaro seats, meaning taller drivers can send their seat all the way back and still maintain a comfortable recline. Precision CNC machined solid steel interlocking roll bar clamps on the kicker mounting plates help make installation a snap. Free custom powder-coating gives you a premium, finished look without breaking the budget. Add the optional custom-cut Rear Seat Delete Kit and you've got a fully trimmed-out roll bar installation that performs as great as it looks. The CMS Performance Gen 5 Camaro Roll Bar is the perfect foundation for taking your safety up a huge notch. SAFETY IS CMS PERFORMANCE FIRST PRIORITY Safety is the main reason to install a roll bar in the first place. As racers themselves, CMS Performance sweat the details. That's why they use 1.75" x .095" Docol R8. Docol is 15% stronger than 4130 CrMo, and much less brittle. Docol R8 also dissipates impact energy more effectively. It's the same tubing used in full-competition road racing roll cages because, first and foremost, it's a roll bar not a trim piece. The beefy main hoop of the CMS Performance Gen 5 Camaro Roll Bar straddles the rear seat cross member, a much stronger location than the rear footwell, eliminating the need for underbody backing plates. Taking a cue from NHRA cage design, the diagonal supports feature a concave design to allow full front-seat travel while distributing roll-over energy between the main hoop and kickers. The harness cross-bar is precisely located to put your shoulder straps at both the proper angle (0 to -20 ) and distance to the driver. Finally, the rear kickers bolt to a reinforced corner of the rear seat floor, again requiring no backing plates beneath the floor pan. A clear rear view is a safety concern. CMS Performance uses stronger materials and innovative design, making it safe to keep your rear view unobstructed by additional bracing. This also helps weight down. Every detail of the CMS Performance Gen 5 Camaro Roll Bar is engineered with safety as the primary goal. HAND CRAFTED IN AMERICA Okay, another reason people install roll bars is because they look cool. We're all car guys, we get that. Each CMS Performance roll bar is handcrafted right here in America by master fabricators for a perfect fit, beautifully 360o TIG welded for high strength, and fully powder-coated in our facility for a brilliant, durable finish. There's no extra charge for custom colors. CMS Performance operates a complete powder-coating facility to offer you color-matched Camaro factory colors, giving your Camaro a personalized look that will last. None of your interior trim panels need to be eliminated or cut. Your rear seat back can be re-installed, or you can opt for our custom Shrader rear seat delete, the perfect place to put a track bag, helmet and HANS, driver cooling system, etc. (you can hide stuff under there, too). If you ever want to put your car back to stock, it will go back together as though the roll bar was never there. Complete, detailed instructions make installation pretty simple (figure about two hours if you're reasonably handy), and all Grade 8 hardware needed is shipped with your CMS roll bar. Add Racing Harnesses and a Head-And-Neck Restraint and and you're ready to hit the track safe and secure. CMS PERFORMANCE GEN 5 CHEVY CAMARO ROLL BAR DETAILS 1.75 Ä≥ X .095" Docol R8 Advanced High-Strength Steel for superior safety Full 360o TIG welding for ultimate strength, integrity, and beauty Stronger one-piece main hoop/kicker design with detachable kicker feet for installation Only 51 lbs., yet incredibly strong Custom-made rear seat delete available Precision CNC-cut mounting plates Designed, built, and powder-coated in the USA CNC machined steel interlocking roll bar clamps ease installation Allows full seat travel with any seat Straightforward install and perfect fitment Comes with all necessary hardware This product is intended for off-road use only.

CMS Performance Bolt In Roll Bar For FR-S/BRZ/GT86 This Roll Bar Fits The Following Cars: Scion FR-S (ZN6), 2013-2016 Toyota GT86 (ZN6), 2017-2020 Subaru BRZ (ZC6), 2013-2020 The Superior Bolt-In Roll Bar for the FR-S/BRZ/GT86 The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the first-gen  Scion FR-S, Toyota GT86, and Subaru BRZ. Engineered with a premium placed on safety and structural rigidity, the exceptional design of the CMS Performance Roll Bar integrates perfectly with the car's sporty, all-business interior. CMS Performance uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength, impact absorption, and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used by other roll bar manufacturers. This makes the CMS Performance Roll Bar for the Scion FR-S/Toyota GT86/Subaru BRZ superior in every way, including resistance to deformation, weld integrity, and energy dissipation. The one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. The rearward kickers are optimized for support in a roll-over event while maintaining an unobstructed rear view for the driver. The main hoop cross bar is designed to locate your racing harness shoulder straps at the proper angle (0° to -20° front-to-back) to the driver's shoulders regardless of seat position. True Bolt-In Installation Without Sacrificing Safety or Looks Click Here for Installation Instructions The CMS Performance Roll Bar bolts directly to chassis strong points without the need for any significant modifications to the chassis or use of under-car backing plates. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Exceptional Color Options Set CMS Performance Apart Each CMS Performance roll bar includes custom powder coating in your choice of color-matched factory paint colors for Scion, Toyota, and Subaru! You don't have to settle for generic black, white, red, or yellow. CMS Performance can also powder coat your roll bar in one of our amazing technical colors, such as the astoundingly cool Superchrome! And, of course, there's always our rich satin black option for a stealthy installation. Custom Made Rear Seat Delete Kit Available CMS Performance offers an optional customized Shrader rear seat delete kit made specifically for the Scion FR-S, Toyota GT86, and Subaru BRZ. It is specially modified to fit the CMS Performance Roll Bar, giving your installation an amazing factory-finished look. CMS Performance: The Best Products At The Best Price An unwavering focus on cutting-edge materials, unsurpassed design & construction, and premium fit & finish has propelled CMS Performance roll bars to the top of the industry. The CMS Performance Scion FR-S/Toyota GT86/Subaru BRZ Roll Bar is the latest addition to our growing catalog, offering unsurpassed safety, integrity, design and customization to customers taking this amazing car to the next level on the street or at the track. CMS Performance Scion FR-S/Subaru BRZ Roll Bar Details Manufacturer: CMS Performance Manufacturer Part: CPRB-GT86 Materials: 1.75″ X .095" Docol R8 Advanced High Strength Steel Features: One-piece main hoop for superior strength and occupant safety; proprietary kicker design eases installation while maintaining exceptional strength CNC-cut mounting plates CNC machined high-strength-steel interlocking joints Allows full seat travel with virtually any seat All USA-made Grade 8 hardware included Comes with detailed installation instructions This product is intended for off-road race track use only.

CMS Performance Bolt In Roll Bar For BMW E92 M3 (2008-13) A PREMIUM BOLT-IN ROLL BAR FOR THE LEGENDARY E92 The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the BMW E92 M3. It is engineered to easily bolt into any E92 variant, providing you with both the rollover protection of a super-strong roll bar and the beauty and craftsmanship for which CMS Performance is renowned. Engineered with a premium on safety and structural rigidity, the exceptional design integrates perfectly with the M3's luxury/sport interior. CMS uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used by other roll bar manufacturers. It is superior in every way: resistance to deformation, weld strength, and energy dissipation. Our one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. Rearward "kicker" supports are optimized for support and easy installation while maintaining an unobstructed rear view. The harness bar is specifically designed to locate racing harness shoulder straps at the proper angle (0° to -20°) in most seating positions. CUTTING EDGE MATERIALS & DIRECT BOLT-IN Click Here for Installation Instructions The CMS Performance BMW E92 M3 Roll Bar is designed to bolt directly to the M3 chassis' strong points without the need for any modification of existing interior trim or use of backing plates. Adding a CMS custom designed rear seat delete gives the whole installation a clean, factory appearance. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched M3 factory colors, satin black for a more stealthy appearance, or any of over 5,000 custom powder coat colors for a truly customized look. Our unwavering focus on using cutting-edge materials, unsurpassed design & construction, and premium fit & finish has taken CMS Performance Roll Bars to the top of the industry. The BMW E92 M3 roll bar is the latest addition to our growing catalog, bringing safety, integrity, and beauty to your M3 whether on the street or at the track! CMS PERFORMANCE BMW E92 M3 ROLL BAR OPTIONS Main hoop X-brace gussets (as shown in photos) can be added for $200. Schroth Profi II ASM four-point harnesses have a patented anti-submarine design to give you racing harness safety with your factory BMW seats. Roll Bar Harness Collars help keep your shoulder straps where you want them. CMS PERFORMANCE BMW E92 M3 ROLL BAR DETAILS 1.75″ X .090" Docol R8 Advanced High Strength Steel throughout (stronger than 4130 CrMo) One-piece main hoop for superior strength and occupant safety Three-piece kickers ease installation while maintaining exceptional strength Precision-cut mounting plates Designed and TIG welded in the USA by master racing fabricators CNC machined high-strength-steel interlocking joints Allows full seat travel with virtually any seat All USA-made Grade 8 hardware included Comes with detailed installation instructions Installation requires removal of the factory rear seat bottom cushion. This product is intended for off-road use only.

CMS Performance Roll Bar for the Mustang Dark Horse (2024+) THE BEST ROLL BAR ON EARTH IN FORD'S TRACK MONSTER The CMS Performance Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market for the Dark Horse. In designing our roll bar, safety, strength, and structural integrity were our primary goals. That's why it is fully TIG welded from ultra-strong Docol R8 Advanced High-Strength Steel sized 1.75" diam x .095" wall, vs. the mild-steel tubing other companies use. Docol R8 is 30-35% stronger than DOM mild steel and even 10-15% stronger than 4130 CrMo steel. This allows CMS Performance to design a roll bar that is stronger and lighter weight. Precision CNC machined interlocking roll bar clamps, made to our specifications in the USA, make joining the main hoop and kickers easier during installation while giving the CMS Performance roll bar a premium, finished look. Adding an optional Shrader Rear Seat Delete Kit gives your roll bar installation a from-the-factory OEM look. AMERICAN MADE SAFETY FOR AN AMERICAN ICON Let's face it, safety is the primary reason to install a roll bar in your Dark Horse. So the CMS Performance Shelby Roll Bar is designed to place your harness shoulder straps at both the proper angle (0° to -20°) and distance to the driver.  The rear kickers bolt to a strong existing bulkhead, requiring no reinforcement plates beneath the floor pan. Our use of state-of-the-art Docol ultra-high-strength-steel tubing throughout allows us to keep the driver's rear view unobstructed by diagonal braces, which also keeps weight down. Every detail is engineered with safety and structural integrity as our primary goal. PRECISION CRAFTED AND CUSTOM FINISHED IN OEM COLORS The other reason to install a roll bar is because it really complements the aggressive, race-inspired styling of the S650 Dark Horse. We're gear heads, we get that. So each bar is crafted by hand by master fabricators, 360o TIG welded for the ultimate in strength and durability, and then custom powder coated in our facility (at no extra charge). We've color-matched powder to most of Ford's factory paint colors for a truly customized look, or you can choose from thousands of custom colors and finishes like the amazing Superchrome, giving your Shelby a personalized look that will last. Going from raw Docol tube stock to a gleaming finish, every roll bar is handcrafted by our most experienced cage- and race car builders. Nothing is left to chance. The CMS roll bar is designed to give you an unobstructed view through your rear window. None of your plastic interior trim needs to be removed or cut, just a little carpet that is hidden away. So if you ever need to put your car back to stock, it will look as though the roll bar was never there. Click Here for Installation Instructions EASIER INSTALLATION & MULTIPLE OPTIONS FOR YOUR DARK HORSE ROLL BAR Check out the GREAT installation video here! 1 Complete, detailed instructions make installation pretty simple (figure about two hours if you're reasonably handy; having a buddy helps!) All the supplied installation hardware is American made: Grade 8 mounting hardware and an industrial carbide drill bit. So you don't have worry that you don't have what you need for a flawless installation. You can add six-point or four-point harnesses to your order to take full advantage of the safety upgrade your roll bar represents. The CMS Performance Sub Strap + Lap Belt Mount makes securely installing your racing harnesses easy. Check out the drop-downs above. Many customers also add CMS Locking Harness Collars to keep harness shoulder straps right where you want them (they're not required for safety, but a lot of people like the look.) 1 Note: Thank you to our customer "@1_trickpony_" for putting in the time and effort to shoot and edit a fantastic installation video! CMS PERFORMANCE S650 MUSTANG DARK HORSE ROLL BAR DETAILS Manufacturer: CMS Performance Manufacturer Part #: CPRB-S650 Material: 1.75″ x .095" Docol R8 Advanced High-Strength Steel tubing Construction: full 360o TIG welding Design: one-piece main hoop and three-piece rear kicker for simpler installation. Weight: 52 lbs. (23.6 kg) Included hardware: all necessary Grade 8 bolts, nuts & washers Drill bit: included CMS PERFORMANCE S650 MUSTANG DARK HORSE ROLL BAR FEATURES CNC-cut mounting plates. Designed, built, and finished by CMS Performance in the USA. American-made CNC machined high-strength steel interlocking clamps Allows full seat travel with any seat. Straightforward installation and perfect fitment, guaranteed. This product is intended for off-road race track use only.

CMS Performance Roll Bar for Mustang S550 Shelby GT350, GT350R, and GT500 This Roll Bar Fits the Following Cars: 2016+ Ford Shelby GT350 2016+ Ford Shelby GT350R 2015+ Ford Shelby GT500 2015+ Ford Mustang S550 (V6, EcoBoost, GT) HANDS DOWN THE BEST MUSTANG ROLL BAR IN THE WORLD Click Here for Installation Instructions The CMS Performance Mustang Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market. In designing the Mustang roll bar, safety, strength, and structural integrity were the primary goals at CMS Performance. That's why this roll bar is fully TIG welded from ultra-strong Docol R8 Advanced High-Strength Steel  sized 1.75" diameter x .095" wall, vs. the DOM mild-steel tubing others use. Docol R8 is 30-35% stronger than DOM mild steel and even 10-15% stronger than 4130 CrMo steel. This allowed CMS Performance to design a roll bar that is stronger and lighter than any other! Precision CNC-machined interlocking roll bar clamps, made in the USA to CMS Performance exacting specifications, make assembling the main hoop and kickers easy while giving the CMS Performance roll bar a premium, finished look. Adding the optional Rear Seat Delete Kit (not necessary on the GT350R) gives your roll bar installation a factory OEM look. SAFETY FIRST WITH CMS PERFORMANCE Let's face it, safety is the primary reason to install a roll bar in the first place. So the CMS Performance Mustang Roll Bar is designed to place your harness shoulder straps at both the proper angle (0 to -20 ) and distance to the driver. The rear kickers bolt to a strong existing bulkhead, requiring no reinforcement plates beneath the floor pan. Our use of state-of-the-art Docol ultra-high-strength-steel tubing throughout allows us to keep the driver's rear view unobstructed by diagonal braces, which also keeps weight down. Every detail is engineered with safety and structural integrity as our primary goal. HAND-CRAFTED COOL MADE IN AMERICA The other reason to install a roll bar is because it really complements the aggressive, race-inspired styling of the Mustang S550 and Shelby GT350/R/500. We get that. So each bar is crafted by hand by master fabricators, TIG welded for the ultimate in durability, and custom powder coated in the CMS Performance production facility at no extra charge. They have color-matched powder coating to Ford OEM factory paint colors for a truly customized look. Or you can choose from thousands of custom colors and finishes to give your car a personalized look that will last. Going from raw Docol R8 tube stock to a gleaming finish, every roll bar is handcrafted by experienced expert cage- and race car builders. Nothing is left to chance. The CMS Performance S550 Mustang Roll Bar is designed to give you an unobstructed view through your rear window. None of your plastic interior trim needs to be removed or cut, just a little carpet that is hidden away. So if you ever need to put your car back to stock, it will look as though the roll bar was never there. Complete detailed instructions make installation straightforward (figure about two hours if you're reasonably handy; having a buddy helps!) All the supplied installation hardware is American made: Grade 8 mounting hardware and an industrial carbide drill bit. So you don't have worry that you don't have what you need for a flawless installation. You can add four-point Schroth Profi II ASM Harnesses specifically designed for use in cars like the S550 Mustang, with no sub-strap cut-through in the seat. Many customers also add CMS Locking Harness Collars to keep harness shoulder straps right where you want them (they're not required for safety, but a lot of people like the look!) CMS PERFORMANCE MUSTANG S550/SHELBY GT350/GT350R/GT500 ROLL BAR DETAILS 1.75" X .095" Docol R8 Advanced High-Strength Steel for superior strength and safety Fully TIG welded for ultimate strength, integrity, and beauty One-piece main hoop and three-piece rear kicker make installation simpler Only 52 lbs. yet incredibly strong CNC-cut mounting plates Designed, built, and powder-coated by CMS in the USA CNC machined high-strength steel interlocking clamps ease installation Allows full seat travel with any seat Straightforward install and perfect fitment, guaranteed Includes all necessary hardware including carbide drill bit Roll bar installation in the Mustang V6, EcoBoost, GT, Shelby GT350 & GT500 requires removal of the rear seats. An OEM rear-seat delete comes standard in the GT350R, although our rear seat delete saves you cutting up the OEM should you wish to save it. This product is intended for off-road use only.

CMS Performance Roll Bar for S197 Mustang This Roll Bar Fits the Following Cars: Ford Mustang S197 (2005 -2014), all except convertible Click Here for Installation Instructions HANDS DOWN THE BEST ROLL BAR FOR THE S197 MUSTANG The CMS Performance S197 Mustang Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market. In designing the Mustang roll bar, safety, strength, and structural integrity were primary goals. That's why the CMS Performance S197 roll bar is fully TIG welded from ultra-strong Docol R8 Advanced High-Strength Steel sized 1.75" diam x 0.095" wall, vs. the mild-steel tubing others use. Docol R8 is 30-35% stronger than DOM mild steel and even 10-15% stronger than 4130 CrMo steel. This allowed us to design a roll bar that is stronger and lighter. Precision CNC machined interlocking roll bar clamps, made to our specifications in the USA, make joining the main hoop and kickers easier during installation while giving the CMS Performance roll bar a premium, finished look. INCREASE YOUR SAFETY AND LOOK GOOD DOING IT Safety is the main reason to install a roll bar in the first place. So the CMS Performance S197 Mustang Roll Bar is designed to place your harness shoulder straps at both the proper angle (0 to -20 ) and distance to the driver. The rear kickers bolt to a strong existing bulkhead, requiring no reinforcement plates beneath the floor pan. Our use of state-of-the-art Docol ultra-high-strength-steel tubing throughout allows us to keep the driver's rear view unobstructed by diagonal braces, which also keeps weight down. Every detail is engineered with safety and structural integrity as our primary goal. AMERICAN MADE AND HAND-CRAFTED COOL The second reason to install a roll bar is because it really complements the aggressive, race-inspired styling of the Mustang. We get that. So each bar is crafted by hand by master fabricators, TIG welded for the ultimate in durability, and custom powder coated in our facility (at no extra charge). We've color-matched powder to most of Ford's factory paint colors for a truly customized look, or you can choose from thousands of custom colors and finishes to give your car a personalized look that will last. Going from raw Docol tube stock to a gleaming finish, every roll bar is handcrafted by our most experienced cage- and race car builders. Nothing is left to chance. The CMS roll bar is designed to give you an unobstructed view through your rear window. None of your plastic interior trim needs to be removed or cut, just a little carpet that is hidden away. So if you ever need to put your car back to stock, it will look as though the roll bar was never there. EASY INSTALLATION AND OPTIONAL HARNESSES COMPLETE YOUR SAFETY UPGRADE Complete, detailed instructions make installation pretty simple (figure about two hours if you're reasonably handy; having a buddy helps!) All the supplied installation hardware is American made: Grade 8 mounting hardware and an industrial carbide drill bit. So you don't have worry that you don't have what you need for a flawless installation. You can add four-point Schroth Profi II ASM Harnesses specifically designed for use in cars with no sub-strap cut-through in the seat (like the Mustang). Many customers also add CMS Locking Harness Collars to keep harness shoulder straps right where you want them (they're not required for safety, but a lot of people like the look!). CMS PERFORMANCE S197 MUSTANG ROLL BAR DETAILS Manufacturer: CMS Performance Manufacturer part no.: PRB197 Materials: Docol R8 advanced high-strength steel tubing 1.75 x 0.095; CNC-cut carbon steel mounting plates; CNC-machined solid steel interlocking roll bar joints Construction: full penetration 360º TIG welding Design features: one-piece main hoop and three-piece rear kicker make installation simple; allows full seat travel with any seat Weight: 52 lbs. (23.6 kg) Designed, built, and powder-coated by CMS in the USA Includes all necessary hardware including carbide drill bit Roll bar installation in the Mustang requires removal of the rear seats. This product is intended for off-road use only.

CMS Performance Bolt-In Harness Bar for Porsche 981 & 718 Cayman This Harness Bar Fits The Following Cars: Porsche Cayman (2014+) Porsche Cayman S (2014+) Porsche Cayman GTS (2015+) Porsche Cayman GT4 (2016+) Porsche Cayman GT4 RS (2022+) High Strength Bolt In Harness Bar For Your Porsche Cayman Expertly crafted from high-strength, fully TIG welded Docol R8 Advanced High-Strength Steel tubing, the CMS Performance Porsche Cayman Harness Bar is the strongest, lightest, and safest bolt-in harness bar on the market for your Porsche 981 Cayman. It gives you the perfect attachment for your five- or six-point harness shoulder straps without having to install a full roll bar. The CMS Performance Porsche Cayman Harness Bar is designed to place your racing harness shoulder straps at the proper angle (0° to -20°) and distance (eight inches or less) so the driver and passenger racing harnesses function properly. There is no need to cut your Porsche Cayman's carpeted central hump, a design unique to CMS Performance that provides an ideal location for mounting an AiM SmartyCam. The CMS Performance Porsche Cayman Harness Bar also gives you full access to the engine cover. It mounts to the frame structure across the passenger compartment bulkhead, directly behind the seats. Click Here For Installation Instructions Made In The USA For The Ultimate In Quality And Precision The CMS Performance Porsche Cayman Harness Bar is meticulously designed, fabricated, and fully TIG welded by CMS Performance master fabricators for unsurpassed integrity, fit, and finish. The harness bar comes standard in a smooth satin black powder coat to complement any interior. Or you can choose from any number of custom powder coat colors matched to most factory Porsche paint colors. To install the CMS Performance Porsche Cayman Harness Bar, some modification of your OEM interior trim will be required. CMS Performance offers precision-cut OEM Porsche trim as an option to ease installation and preserve your original interior pieces. Features Of The CMS Performance Porsche Cayman Harness Bar: 1.50″ x .120" Docol R8 Advanced High-Strength Steel No cutting of carpeted center hump preserves expensive OEM carpet CNC-cut mounting plates Designed and built in the USA Allows full seat travel with any seat Easy to install with perfect fitment guaranteed Detailed Installation Instructions and all necessary hardware included

CMS Performance Deluxe Bolt-In Harness Bar For C8 Corvette This Harness Bar Fits the Following Cars: Chevrolet Corvette Stingray & Z51 (2020+) Chevrolet Corvette Z06 (2023+) Does not fit convertible models A HARNESS BAR BUILT TO THE SAME EXACTING STANDARDS AS YOUR C8! The C8 Corvette is an incredible, affordable track-day car that easily achieves race car performance on track. Managing that kind of performance wearing nothing but a three-point seat belt is a chore and leaves a lot to be desired in terms of safety. That's where we come in with the CMS Performance C8 Corvette Deluxe Harness Bar. Featuring the same rock-solid, high-strength design as our standard C8 Harness Bar, the Deluxe bar adds an innovative "main hoop" design, giving it a more aggressive look. This also gives you a place to mount an in-car motorsports video camera, like the AiM Sports SmartyCam GP HD. Of course, it provides high-strength mounting points for your harness shoulder straps to keep you firmly and safely in your seat. The CMS Performance C8 Deluxe Harness Bar is the strongest, most elegantly designed C8 harness bar on the market. It seamlessly integrates into your C8 interior, preserves your rear view, and gives the C8 a big bump in cool factor, especially with a custom powder-coat color! The CMS C8 Deluxe Harness Bar allows full seat travel while locating your harness shoulder belts at the proper height for maximum on-track safety and security. Click Here For Installation Instructions Installation requires no drilling or other modification of the chassis, and no modification of your upper center console trim. Some modification of your B-pillar lock/seat belt trim panels is required. We offer precision pre-cut panels to ease installation and save your originals if you need to put your C8 back to stock. THE BEST C8 HARNESS BAR IS DESIGNED AND BUILT IN AMERI CA Every CMS Performance Deluxe Harness Bar for the C8 Corvette is painstakingly designed and hand-crafted in America by master racing fabricators. This guarantees you a superior product and perfect fit. The CMS Performance Deluxe Harness Bar is meticulously 360o TIG welded for high strength, and fully powder-coated in our facility for a brilliant, durable finish. And there's no extra charge for custom colors. CMS operates a complete powder-coating facility to offer you color-matched Corvette factory colors, giving your C8 a customized look that will last. CNC mandrel bent and fully TIG welded from premium Docol R8 Advanced High-Strength Steel (stronger than 4130 CrMo or DOM) and finished in rich powder coating. Complete, detailed instructions make installation pretty simple (figure about an hour if you're reasonably handy). Add optional four-point Schroth Profi II ASM Harnesses and our Harness Installation Kit, and you're ready to hit the race track. These harnesses were specifically designed for use in street cars with no sub strap pass-through in the seat. CMS PERFORMANCE C8 DELUXE HARNESS BAR DETAILS: Manufacturer: CMS Performance Manufacturer part no.: CPHB-C8DLX Material: 1.50 x .095 Docol R8 Advanced High-Strength Steel Construction: full 360o TIG welding Finish: custom powder coating is included, any color you can imagine! Weight: 24 lbs. (10.9 kg) Features: unobstructed rear view; designed, built, and powder coated in the USA; allows full seat travel with any seat Installation: includes all necessary hardware This product is intended for off-road use only.

Silver Rocket Roll Cage Anchor Kit For Porsche 718 Cayman This Roll Bar Fits the Following Cars: Porsche Cayman 981 (all, without factory Clubsport Roll Cage option) Porsche Cayman 718 (all, without factory Clubsport Roll Cage option) Superior Materials and Manufacturing Made with high-strength aircraft-grade 7075-T6 aluminum alloy, the Silver Rocket Cayman Roll Cage Anchor Kit involves over 50 hours of precise CNC manufacturing. Designed to fit all 718 models without the factory Clubsport Roll Cage option (e.g., all U.S. cars), this anchor kit is an amazing solution for installing the Silver Rocket Dry Carbon Fiber Roll Cage or retrofitting a Porsche Clubsport Roll Cage into any 718 model that doesn't have the Clubsport option. Extremely Lightweight and Durable Silver Rocket's innovative, lightweight design keeps weight down to only 460g (16.2 oz.). Yet the Silver Rocket Anchor can withstand over 34.6 kN (3.5 metric tons) of force and provides 494 Mpa of tensile yield strength, over 20% more than the Porsche OEM design. Easy Installation With All Necessary Templates and Tools All interior cutting templates, adhesives, and necessary tools are provided in the Silver Rocket Roll Cage Anchor Kit, plus a very detailed installation manual with step-by-step photos. Say goodbye to the pain and complexity of installing a roll cage or roll bar into any Porsche 718 or 981 Cayman model without the Porsche Clubsport factory preparation. Silver Rocket Roll Cage Anchor Kit Details Manufacturer: Silver Rocket Advanced Motorsport Engineering Manufacturer part no.: SR-718AK Fits all Porsche 718 and 981 Cayman models without the factory Clubsport Roll Cage option Manufactured from 100% aerospace-grade 7075-T6 aluminum alloy Very high strength and light weight CAD-optimized design Straightforward installation with very detailed instruction manual and step-by-step photos This product is intended for off-road, race track use only.

Brey Krause R-1125 Harness Bar C7 Corvette Coupe This Harness Bar Fits C7 Corvette Coupes As Follows: Chevrolet Corvette Stingray & Z51 (2014-2019) Chevrolet Corvette Z06 (2015-2019) Chevrolet Corvette Grand Sport (2017-2019) Chevrloet Corvette ZR1 (2019) The Brey Krause Model R-1125 Harness Bar for the C7 Corvette Coupe (does not fit convertible models) properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G-force loads of cornering and braking. Brey Krause bars are easy to install and remove, and will get you ready for the track in just a few hours! Special Note: Because of mounting locations in the C7, the B-pillar plastic sail panel covers will require a slot on either side to be cut. Sail panel replacements can be ordered from your GM dealer if you don't want to cut the original panels (Part 23176134 for driver side, and part 23176135 for passenger side). Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts. Brey Krause C7 Corvette Harness Bar Details: Manufacturer: Brey Krause Manufacturer Part Number: R-1125 Material: Type 304 stainless steel Finish: Powder coated in durable black wrinkle-finish Weight: 17.2 lbs (7.8 kg) Installation: Bar attaches to factory mounting points in B-pillars

CMS Performance Bolt-In Harness Bar For C8 Corvette This Harness Bar Fits the Following Cars (does not fit convertible): Chevrolet Corvette Stingray, C8 (2020+) Chevrolet Corvette Z06, C8 (2023+) THE ROLL BAR AS AWESOME AS THE C8 ITSELF! The C8 Corvette is an incredible, affordable supercar that easily achieves race car performance on track. Maintaining driver safety with that kind of performance wearing nothing but the three-point seat belt is a chore and leaves a lot to be desired in terms of safety. That's where we come in with the CMS Performance C8 Corvette Harness Bar. This provides a rock-solid, high-strength bar to mount shoulder straps for a 4-, 5-, or 6-point racing harness to keep you firmly and safely in your seat. The CMS Performance C8 Harness Bar is the strongest, most elegantly designed C8 harness bar on the market. It seamlessly integrates into your C8 interior, and we custom powder coat it whatever color you choose, including factory color-matched hues. The CMS C8 bar allows full seat travel while locating your harness shoulder belts at the proper height for maximum on-track safety and security. Click Here For Installation Instructions Installation requires no drilling or other modification of the chassis, and only minor modification of your interior trim. You can add our precision pre-cut OEM trim to ease the install, preserving your original trim should you want to put your Corvette back to stock in the future. PREMIUM QUALITY AND EXCEPTIONAL PERFORMANCE Every CMS Performance C8 Corvette Harness Bar is designed and hand-crafted in the USA by race chassis fabricators for a perfect fit, beautifully 360o TIG welded for high strength, and fully powder coated in the CMS Performance facility for a brilliant, durable finish. There's no extra charge for color-matched Corvette factory colors, giving your C8 a customized look that will last. CNC mandrel bent and fully TIG welded from premium Docol R8 Advanced High-Strength Steel (stronger than 4130 CrMo and mild steel) and finished in a rich powder coat color. Complete, detailed instructions make installation pretty simple (figure about an hour if you're reasonably handy). Installation requires modifying the two lock/seat belt trim panels and the upper trim of your center console. We offer two levels of pre-cut trim to ease installation: first, just the upper console (the most visible and most difficult to trim correctly); second the upper console plus the two lock/seat belt trim panels. Our installation instructions also include cutting templates should you decide to modify your existing trim. Add optional four-point Schroth Profi II ASM Harnesses and our Harness Install Kit, and you're ready to hit the track. These harnesses were specifically designed for use in street cars with no sub strap pass-through in the seat. CMS PERFORMANCE C8 CORVETTE HARNESS BAR DETAILS: Manufacturer: CMS Performance Manufacturer part no.: CPHB-C8PR Material: 1.50" x .095" Docol R8 Advanced High-Strength Steel Construction: Full 360o TIG welded Finish: Custom-color powder coating is included Weight: 18 lbs. (8.2 kg) Unobstructed rear view Designed, built, and finished in the USA Allows full seat travel with any seat Includes all necessary hardware This product is intended for off-road use only.

Rear Seat Delete for BMW F87 M2 Complete your CMS Performance roll bar installation with this custom-made rear seat delete kit for the BMW F87 M2. Made from high-strength ABS plastic and upholstered to match the look of your BMW M2 interior. Set includes seat back and two seat-bottom replacement panels.  

Sub Strap Mount for Porsche LWB   For cars with Porsche OEM CFRP Full Bucket ("Lightweight Bucket" or "LWB") Seats Only. FITMENT: 992 GT3/GT3RS 991.1 & .2 GT3/GT3RS 992 GT3/GT3RS 991.2 GT2RS 981 Cayman GT4 718 Cayman GT4 The Performance Sub Strap Mount is a must-have for Porsche GT2RS, GT3/GT3RS, and GT4 owners using five-, six-, or seven-point harnesses with the factory CFRP Full Bucket Seats (also called Lighweight Bucket Seats). Designed to easily bolt in using existing seat hardware without having to fully remove the seats from the car, the Performance Sub Strap Mount properly anchors your harness anti-submarine straps ("sub straps") to your seat base. The Performance Sub Strap Mount fits either driver- or passenger-side seats. Performance Sub Strap Mounts are designed, manufactured, and powder-coated entirely in-house in the USA. Made of solid steel while only weighing 1.4 lbs (625g), there's not a stronger, more affordable solution available. The Sub Strap Mounts allow full seat adjustment, fore/aft and up/down, while maintaining the ideal sub strap angle to your body for maximum safety.     FEATURES: Solid steel construction for maximum safety Allows full fore/aft and up/down seat adjustment Powder-coated to match OEM seat base Fits driver or passenger seat (Porsche LWB only) Simple to install Compatible with OEM seat belt and airbag hardware

Allstar SFI 45.1 Hi-Density Bar Padding - 3' Black ChampCar legal SFI 45.1 roll bar padding providing maximum flame retardation and energy absorption. Constructed from hi-density fire resistant materials, you have the impact protection you need and the fire protection you hope you never need. Allstar SFI 45.1 Hi-Density Bar Padding - 3' Black Details: Manufacturer: Allstar Manufacturer part number: 14112 Required in NHRA, SCCA, NASCAR, Grand-Am, PWC, NASA, BMWCCA, ChampCar, PCA and more. Rating meets SFI spec 45.1 Provides maximum in energy absorption and flame retardation Will not drip or melt in fire Fits bars from 1-1/4" to 1-3/4" 36" length, pre-taped adhesive For perfect corners use a hack saw and a miter box #1 Seller in Roll Bar Padding Allstar SFI 45.1 roll bar padding won't melt or drip in a fire and is our #1 seller in roll-bar padding.

Harness Belt Roll Bar Guide Clamp Keep your shoulder belts or head containment net straps in place with our heavy duty but lightweight aluminum 2 piece harness guide clamp that fits 1.5" and 1.75" roll bars perfectly. Harness Belt Roll Bar Guide Clamp Details: Manufacturer: DiscoveryParts Manufacturer part number 1.5": RB-COLLAR-AL15-BLK Manufacturer part number: 1.75": RB-COLLAR-AL175-BLK Material: Steel Finish: Black oxide Keeps your belts or cage nets in place, assisting in protection in a multiple impact. 2 Piece design makes installation easy Assists in perfect belt geometry Smooth radius on all edges so no scrapes or cuts when working in the area Sold in qty one each Perfectly sized to fit all roll bars with either 1.75" or 1.50" harness cross-bars. Precision-machined roll bar harness collars help keep your harness shoulder straps in exactly the right place on your roll bar. Easy to install double-split collars with high-strength Allen bolt hardware, they are available in satin black powder-coated aluminum.