Schuberth

Schuberth Composite Side and Top Air The Schuberth Composite Side and Top Air is a clear forced-air helmet ventilation attachment designed to help route fresh air through the dedicated airflow channels inside the helmet EPS. Built for Schuberth SP1 and SF4 helmet applications, this accessory attaches across the top and side of the helmet with high-strength double-sided adhesive. Side and top forced-air ventilation for Schuberth SP1 and SF4 helmets This clear composite air inlet gives drivers an integrated forced-air connection for hot cockpit conditions, endurance racing, and demanding track sessions. The large screw-on aluminum nozzle uses a 1.25-inch connector, making it a strong choice for compatible helmet cooling hose systems. Features • Clear composite side and top air attachment • Designed for Schuberth SP1 and SF4 helmet applications • Helps pump fresh air through dedicated helmet EPS air channels • Attaches with high-strength double-sided adhesive • Fits both helmet shell sizes • Small shell installation requires trimming the side piece at the orange sticker mark • Large connector size: 1.25 inches • Screw-on aluminum nozzle design Installation Note The clear composite Side and Top Air fits both helmet shell sizes. Before installing the composite version on a small shell, the side piece must be trimmed at the location indicated by the orange sticker. Schuberth Composite Side and Top Air FAQs: What does the Schuberth Composite Side and Top Air do? It connects a compatible forced-air system to the helmet and helps direct fresh airflow through the helmet’s dedicated EPS ventilation channels. Which Schuberth helmets is this designed for? HMS lists this accessory for Schuberth SP1 and SF4 helmet applications. What size is the connector? This version uses a large 1.25-inch connector with a screw-on aluminum nozzle. Does it fit both helmet shell sizes? Yes. The clear composite Side and Top Air fits both shells, but small-shell installation requires trimming the side piece at the orange sticker mark before mounting. How does it attach to the helmet? It installs on the top and side of the helmet using high-strength double-sided adhesive. Complete your Schuberth helmet cooling setup with the Composite Side and Top Air for a clean, high-flow forced-air ventilation solution.

SCHUBERTH EVO SDL High Contrast Visors For SP1/SK1 The SCHUBERTH EVO SDL High Contrast Visors are designed for the new SP1 Carbon Evo and SK1 Carbon Evo helmets. These dual-locking shields use Schuberth’s SDL system to improve both safety and ventilation while delivering the sharper color separation of High Contrast lens technology. High Contrast visibility with Schuberth’s dual-locking SDL system Schuberth’s High Contrast visor technology is built to improve visual clarity by helping separate overlapping color wavelengths, making track details, braking markers, and surrounding traffic easier to read at speed. The SDL locking system retains a two-stage opening design: the first stage allows a small amount of airflow while the visor stays securely locked, and the second stage creates a firm seal to help keep out fine dust. Features • Designed for the new Schuberth SP1 Carbon Evo and SK1 Carbon Evo helmets • Will not fit outgoing SP1 or SK1 helmet models • Injected visor construction derived from Schuberth F1 expertise • High Contrast lens technology improves sharpness, color definition, and vibrancy • SDL dual-locking system supports secure airflow and a tighter sealed position • Available in clear, mirrored, smoke, and rain-focused High Contrast options • Rain visor includes adhesive fog-resistant lens, rubber trim, clear tear-off buttons, and clear locking lever Available Visor Colors • Clear • Clear Red • Clear Blue • Light Red • Dark Red • Light Blue • Clear Rain SCHUBERTH EVO SDL High Contrast Visors FAQs: Which helmets do these visors fit? These High Contrast Dual Locking Visors are made for the new Schuberth SP1 Carbon Evo and SK1 Carbon Evo helmets. Will these fit the older SP1 or SK1 helmets? No. HMS specifically notes that these dual-locking EVO SDL visors do not fit outgoing SP1 or SK1 helmet models. What does High Contrast visor technology do? It helps isolate color wavelengths more effectively, increasing sharpness and visual clarity so drivers can identify track details faster. How does the SDL dual-locking system work? The first stage permits limited airflow while the visor remains locked, while the second stage creates a more secure seal that helps reduce dust intrusion. What is different about the Clear Rain visor? The Rain visor is equipped with an adhesive fog-resistant lens, rubber trim, clear tear-off buttons, and a clear locking lever for wet-weather use. Choose the SCHUBERTH EVO SDL High Contrast visor that best matches your visibility needs and complete your SP1 Carbon Evo or SK1 Carbon Evo helmet setup.

SCHUBERTH Visors For SF4/SP1/SK1 (Legacy Latch) The SCHUBERTH Visors for SF4, SP1, and SK1 helmets are 3 mm thick, 3D-injected replacement shields developed from Schuberth’s top-level motorsport experience. Available in twelve color and finish options, these legacy-latch visors let drivers tailor visibility for clear daylight, changing light, wet-weather use, or a more aggressive mirrored race look. Premium replacement visors for Schuberth SF4, SP1, and SK1 helmets Each standard visor is equipped with a Pinlock 120 fog-resistant lens, clear tear-off buttons, and a clear locking lever. The Clear Rain version uses an adhesive fog-resistant lens instead. Every visor also includes a soft visor pouch to help protect the lens when it is not mounted on the helmet. Features • Fits Schuberth SF4, SP1, and SK1 helmets with the legacy latch visor system • 3 mm thick, 3D-injected visor construction • Developed from Schuberth motorsport and F1 expertise • Twelve visor color and coating options available • Standard visors include Pinlock 120 fog-resistant lens • Standard visors include clear tear-off buttons and clear locking lever • Clear Rain visor uses an adhesive fog-resistant lens • Soft visor pouch included with each visor Available Visor Colors • Clear • Clear Red • Clear Blue • Clear Silver • Light Red • Dark Red • Light Blue • Dark Blue • Light Smoke • Dark Smoke • Clear Rain • Light Silver SCHUBERTH Visors For SF4/SP1/SK1 FAQs: Which Schuberth helmets do these visors fit? These visors are listed for Schuberth SF4, SP1, and SK1 helmets using the legacy latch visor system. Do the visors include anti-fog protection? Yes. Standard visor options include a Pinlock 120 fog-resistant lens. The Clear Rain visor instead uses an adhesive fog-resistant lens. Are tear-off buttons included? Yes. HMS specifies clear tear-off buttons and a clear locking lever on the standard visor versions. What is the difference between the Clear Rain visor and the standard clear visor? The Clear Rain visor is built for wet-weather use and uses an adhesive fog-resistant lens, while the standard clear visor uses the Pinlock 120 setup. Does each visor come with storage protection? Yes. Each visor includes a soft visor pouch to help protect it when not in use. Refresh your Schuberth helmet setup with the visor color and finish that matches your race-day visibility needs.