Longacre
Longacre Battery Disconnect Switch w- Alt Aluminum Panel
$56.99
Longacre Battery Disconnect Switch w/ Alt Aluminum Panel
Longacre Battery Disconnect Switch With Alternator Disconnect and Black Anodized Lightweight Aluminum Panel. Function and style come together in your racer.
Longacre Battery Disconnect Switch w/ Alt Aluminum Panel Details:
Manufacturer: Longacre
Manufacturer part number: 45784
Manual battery disconnect switch with a bright red handle
Easier to find in an emergency
Prevents battery drain
175 amp continuous rating, 6-36 volt, 1000 peak
Alternator circuit 20 amps
Black Anodized Lightweight Aluminum panel included
SPA Technique
SPA Dip Tube Assembly for MFM400-75S & HPC225
$56.95
SPA Dip Tube Assembly for MFM400, 75S & HPC225
SPA Replacement Dip Tube Assembly for MFM400, 75S and HPC225 Series Fire Systems
SPA Dip Tube Assembly - MFM400/75S & HPC225 Details:
Manufacturer: SPA Technique
Manufacturer Part Number: 02-SP-124
Fits MFM400 bottle: Yes
Fits HPC225 bottle: Yes
SPA Technique
SPA Dip Tube Assembly MFM75A & MFM400A
$56.15
SPA Dip Tube Assembly MFM75 & MFM400A
SPA Dip Tube Assembly for all MFM75A and MFM400A Series Aluminum Bottle Fire Systems. The Spa Technique 02-SP-047 is not a user servicable item and must be replaced by a Spa Technique authorized service center. This is the pick-up tube assembly with a weighted pick-up on the end that is internal of the bottle and is threaded into the discharge handle.
SPA Dip Tube Assembly MFM75A & MFM400A Details:
Manufacturer: Spa Technique
Manufacturer part number: 02-SP-047
Fits: MFM75A and MFM400A Aluminum Bottles
Fits any other SPA bottles: No
SPA Technique
SPA Mechanical Lever Assembly FIA 2018 Systems 16 Bar
$56.00
SPA Mechanical Lever Assembly FIA 2018 Systems
SPA AFFF Mechanical lever valve assembly for all mechanically actuated SPA Technique fire systems used in the the FIA 2018 approved systems.
SPA Mechanical Lever Assembly Details:
Manufacturer: Spa Technique
Manufacturer part number: 02-SP-056-2018
Actuation type: Mechanical
Fits FIA 18 Bar systems: Yes
Fits FIA 8 Bar systems: No
If your FIA 2018 Spa Technique discharge lever is damaged, this is the replacement part needed to get you back on track. The new FIA 2018 systems are identified by having 8mm tubing going to the 8mm nozzles. The FIA 2018 system is charged to 16 Bar compared to the previous 8 Bar.
SPA Technique
SPA Mechanical Lever Assembly 8 Bar
$56.00
SPA Mechanical Lever Assembly Systems
SPA AFFF Mechanical lever valve assembly for all mechanically actuated SPA Technique fire systems used in the Pre-FIA 2018 approved systems.
SPA Mechanical Lever Assembly Details:
Manufacturer: Spa Technique
Manufacturer part number: 02-SP-056
Actuation type: Mechanical
Fits Pre-FIA 18 systems: Yes
Fits FIA 18 Systems: No
Pressure in green band: 8 Bar
If your Pre-FIA 2018 Spa Technique discharge lever is damaged, this is the replacement part needed to get you back on track. The Pre-FIA 2018 systems are identified by having 6mm tubing going to the 6mm nozzles. The Pre-FIA 2018 system is charged to 8 Bar compared to the new 16 Bar.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sabelt
Sabelt UI-600 Nomex Socks
$55.25
$65.00
Sabelt UI-600 Nomex Socks
FIA 8856-2018 Certified
The new UI-600 tech layers from Sabelt offer stretch-fit nearly seamless construction for the ultimate in breathability and comfort while racing.
The composition of this new underwear line makes the clothing light, resistant and extremely comfortable.
The use of Lenzing FR fiber, which is made of a natural raw material, and keeps the body dry and cool, together with the modacrylic and elasthane, which make the garments totally stretch, make this line the most convenient and the most Innovative across the range.
The two way stretch warp knit seamless fabric has a high wear resistance and is very light.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sabelt
Sabelt Seat Pads
$55.20
$69.00
Sabelt Seat Pads
Additional seat pads for further customizing the fit and comfort of your Sabelt racing seat. Choose lumbar support, back support, or both.
Sparco
Sparco Red bull F1 Umbrella
$55.00
Sparco Red Bull F1 Umbrella
Step out into the elements with the precision and flair of a pit crew and the unmistakable style of Red Bull Racing with the Sparco Red Bull F1 Umbrella. This isn’t your average umbrella – this is track-inspired, Formula 1-proven gear that transforms your rain game from a soggy struggle to a stylish victory lap. Get ready to make every stroll feel like a victory podium moment, all while staying dry and showcasing your F1 loyalty.
Features & Benefits
Aerodynamic Design: Engineered with Sparco’s precision, this umbrella can take on wind like it’s on the front line of the grid, keeping you protected without the flapping drama.
Durable Carbon Fiber Frame: It’s as tough as an F1 roll cage but a lot easier to carry. Lightweight and sturdy, this umbrella won’t buckle under pressure, whether it’s a drizzle or a downpour.
Official Red Bull Racing Livery: You’re not just carrying any umbrella – you’re holding a piece of Red Bull Racing magic, sporting the same colors and logo that scream speed, performance, and victory.
Oversized Canopy: Covers more than just your head, so you can keep your track day gear, VIP paddock pass, or lucky racing shoes nice and dry.
Quick-Release Button: One-touch open and close feature lets you spring into action with the same quick-release ease of a Formula 1 pit stop.
Product Specifications
Canopy Size: 50 inches
Weight: Lightweight at 1.2 pounds
Material: Carbon fiber frame with waterproof canopy
Official Licensed Product: Yes – officially licensed by Red Bull Racing and Sparco
Sparco Red Bull F1 Umbrella FAQs
Q: Is the umbrella windproof?A: Absolutely. With Sparco’s aerodynamic touch and durable carbon fiber frame, this umbrella will stand up to some serious wind – perfect for the unpredictable weather at any race event.
Q: Is this the same umbrella used by Red Bull Racing?A: While the drivers might have something custom-built, this is the official licensed version available to Red Bull Racing fans, complete with the iconic logo and colors.
Q: Can I use it on sunny days, too?A: Of course! It offers solid shade for sunny race days, keeping you cool while you wait for the checkered flag.
Sparco
Sparco Dual External Horn Button Kit
$55.00
Sparco Dual External Horn Button Kit
Not just for Horns anymore, the Sparco Dual Horn Button Kit is also used for Radio Push To Talk (PTT), Flash to Pass, Drink Bottle, even NOS. Wiring can be done as 2 separate circuits (series) or both buttons to control one circuit (parallel). This is the big brother of the Sparco Single Horn Button with 2x the function.
Sparco External Horn Button Details:
Manufacturer: Sparco
Manufacturer part number: 015NE982
Buttons included: Yes
Button quantity: 2
Fits between all Sparco, OMP MOMO, Driven steering wheels with 6 bolts: Yes
Color: Black
Button Color: Red
The two buttons can be put in parallel or run as 2 separate circuits. That means you can have each button control it's own circuit or have either control the same. An example is a show car might have both buttons control just the horn, and a racecar may use the left button to control flash to pass and the right button to control the race radio system.
Racing Radios
Racing Radios 3-C NASCAR Helmet Straight Cord
$55.00
Racing Radios 3/C NASCAR Helmet Straight Cord
Racing Radios 3 Conductor NASCAR Helmet Straight Cord for helmet wiring.
Racing Radios IMSA Helmet Straight Cord (4 Conductor) Details
Manufacturer: Racing Radios
Manufacturer part number: HKP-122020
Car Harness End: IMSA (4 Conductor)
Helmet End: Open (4 wires)
Straight or Coiled: Straight
Gold Tipped Connections: Yes
Entry level or Pro: Pro
Racing Radios 3 Conductor NASCAR Helmet Straight Cord. This NASCAR straight, short cable for your helmet kit is a unique item used primarily in open cockpit and small prototype vehicles where the driver head rotational angles are minimal. Having a NASCAR 3C male on one end and 4 gold plated mini male connectors on the other end.
Sparco
Sparco RW-4 Nomex Socks
$55.00
Sparco RW-4 Nomex Socks
The RW-4 line of undergarments are designed to provide both comfort and protection. The RW-4 features a mid-calf soft-touch interlock fabric.
SPARCO RW-4 NOMEX SOCK TECHNOLOGY
Soft and comfortable
Regular Fit
FIA 8856-2018 Approved
AiM Sports
AiM Sports SmartyCam External Power Cable
$55.00
AiM Sports SmartyCam External Power Cable
NOTE: Cables typically take 3 to 5 business days to ship.
If you're not powering your AiM SmartyCam by connecting it to a Solo2 DL or an AiM Sports Dash, you'll need this external power cable in order to provide enough juice for your SmartyCam to record every session. Installation is quick and easy.
Two meters (6.5 feet) in length.
Paragon
Paragon 1.5" Air Hose (10ft)
$54.99
Paragon 1.5" Air Supply Hose (10 Feet)
Paragon’s 1.5” diameter x 10’ length Air Hose is designed to work with Paragon Viking Pro coolers, Viking Pro Bundles, and Air Blower Bundles. At 1.5” diameter, the Paragon Air Hose is small and flexible enough to route to your helmet without any necessary weight, giving you great head cooling while aiding in keeping fog off your visor.
Paragon 1.5" Air Supply Hose Details
Manufacturer: Paragon
Manufacturer part no.: 02-45000
Hose OD: 1.5"
Hose length: 10 feet
Weight: 2 lbs.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo Pivot Kit ST5 Shield and Peak
$54.95
$64.95
Stilo ST5 Shield and Peak Pivot Kit
The Stilo ST5 Shield and Peak Pivot Kit allows a Stilo Peak Visor and Shield to be used together on all ST5 helmets. The visor will have to be able to open and close and the peak visor can be adjusted to the perfect angle to keep the sun out of your eyes. Stilo has a reputation for excellence and the ST5 peak and visor kit will not disappoint. Remember, if you are using a shield in combination with a visor, ( Stilo ST5 Short Sun Visor or other visors of your choice ) it is recommended that you order this kit for the visor and shield to all go on a Stilo helmet.
Stilo ST5 Shield and Peak Pivot Kit
Manufacturer: Stilo
Manufacturer part number: YA0864
Fitment: Stilo ST5 versions
Longacre
Longacre Clamp-On Spot Mirror Clamp (1.50" Clamp)
$54.95
Longacre Clamp-On Spot Mirror (1.50")
Adjustable spot mirror clamps securely onto any 1.50" OD tubing. This mirror is often mounted on the A-pillar of your roll cage, inside the race car to reduce aerodynamic drag by removing the OEM external side mirror while also providing improved rearward vision. It can be mounted on either the driver or passenger side.
The Longacre Clamp-On Spot Mirror is 3.75" in diameter with a convex shape to give you a wide field of view. Easily adjusted, the mirror is designed to resist vibrations and locks firmly in place.
Longacre Clamp-On Spot Mirror Details:
Manufacturer: Longacre
Manufacturer part number: 52-22549
Mirror diameter: 3.75"
Mirror shape: convex
Mounting bracket: machined billet aluminum, fits 1.50" OD tubing
Longacre
Longacre Clamp-On Spot Mirror (1.75" Clamp)
$54.95
Longacre Clamp-On Spot Mirror (1.75")
Adjustable spot mirror clamps securely onto any 1.75" OD tubing. This mirror is often mounted on the A-pillar of your roll cage, inside the race car to reduce aerodynamic drag by removing the OEM external side mirror while also providing improved rearward vision. It can be mounted on either the driver or passenger side.
The Longacre Clamp-On Spot Mirror is 3.75" in diameter with a convex shape to give you a wide field of view. Easily adjusted, the mirror is designed to resist vibrations and locks firmly in place.
Longacre Clamp-On Spot Mirror Details:
Manufacturer: Longacre
Manufacturer part number: 22548
Mirror diameter: 3.75"
Mirror shape: convex
Mounting bracket: machined billet aluminum, fits 1.75" OD tubing
