00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Schroth
Schroth Tuning Harness Pads
$53.96
$59.95
Schroth Tuning Harness Pads
Wearing a harness for long periods of time can irritate the skin your shoulders and neck where the shoulder straps are. In that case, you need a set of Schroth Tuning Harness Pads to give you a soft, safe cushion between you and your harness webbing. They can also simply be used as a stylish comfort add-on to your harness or even your factory three-point seat belt.
Made of high quality polyester, these pads can be washed easily and can be installed/removed in seconds. They come in a wide variety of colors with a Schroth Racing patch sewn in. Priced/sold in pairs, one set of Schroth Tuning Harness Pads covers a harness.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Bell
Bell Victory R1 Helmet Bag
$53.96
$59.95
Bell Victory R1 Helmet Bag
Bell high-end Victory R1 helmet bag protects your investment while incorporating updated styling elements based on Bell original all leather helmet bag. The bag features and external pocket for storage of helmet accessory kits.
BELL VICTORY R1 HELMET BAG SPECS:
Length: 15 in.
Width: 13.5 in.
Height: 13 in.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpinestars
Alpinestars Tech-1 K v2 Kart Racing Gloves
$53.95
$79.95
Alpinestars Tech-1 K V2 Karting Gloves
The Tech-1 K v2 kart racing glove is designed to offer exceptional comfort, feel, and performance to professional drivers. Featuring internal stitching for excellent levels of feel and feedback, this glove also has a synthetic suede leather palm for feel and control, with a silicon surface treatment on the palm and fingers for improved flexibility and control.
This glove is also equipped with Alpinestars open cuff design with a 180° elasticated wrist for easy entry and a secure fit, and mesh fourchettes on all fingers for excellent levels of airflow.
ALPINESTARS TECH 1 -K V2 KART RACING GLOVE CONSTRUCTION
Two-layer stretch nylon-cotton construction provides the optimum combination of feel and comfort.
Combination of technical materials and construction methods results in significant weight reduction.
High levels of grip, sensitivity, and feel.
Ergonomically designed grip treatment plus synthetic suede palms for improved feel, durability, mobility and grip.
Mesh fourchettes provide greater airflow while driving.
ALPINESTARS TECH 1 -K V2 KART RACING GLOVE KEY FEATURES
Equipped with synthetic suede palms for durability, feel and comfort.
Pre-curved finger and innovative palm design aids fit while reducing material bunching.
Straight cut cuff design ensures an easy and secure fitment.
Gauntlet cuff incorporates a 180° elasticated wrist for easy entry and secure fit.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
OMP
OMP ONE Nomex Socks
$53.10
$59.00
OMP ONE Nomex Socks
These socks make use of the same material of the One Underwear, coupled with advanced knitting techniques to provide differentiated pressure areas, with beneficial effect on blood circulation, reducing the feeling of fatigue on the legs whilst driving.
Homologation: FIA 8856-2018
SKU
IE0-0766-A01-020-S
IE0-0766-A01-020-M
IE0-0766-A01-020-L
IE0-0766-A01-071-S
IE0-0766-A01-071-M
IE0-0766-A01-071-L
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
OMP
OMP KS-2 ART Kart Racing Glove
$53.10
$59.00
OMP KS-2 Art Karting Gloves
OMP's brand new KS-2 Art karting gloves have, in our opinion, the coolest styling of almost any racing gloves, karting or auto. But these super-lightweight kart gloves offer more than just great printed graphics. Featuring durable stretch polyester lightweight fabric and high-grip silicon rubber palms, the KS-2 Art karting gloves mean business.
External seams (typically only found on very high-end auto racing gloves) and thin palm material give the driver exceptional comfort and maximum steering feel. Elastic wrist bands keep the gloves from bunching while keeping them easy to get on and off.
With their modern design available in several colors, the OMP KS-2 Art's combination of top-end features and budget friendliness has made these the new staff favorite karting glove!
CONSTRUCTION
Printed silicon rubber palm inserts for optimal grip and sensitivity.
Diagonal cut gauntlet and elastic band on the wrists give great freedom of movement.
External seams for maximum comfort.
Pre-curved design for optimal comfort.
Longacre
Longacre 17" Replacement Mirror
$52.99
Longacre 17" Replacement Mirror
Longacre Wide Angle 17" Racecar Replacement Rear View Mirror. Now you can easily see not just behind you, but in the hidden spots even with your quarter panel in the deepest of brake zones.
LONGACRE 17" MIRROR DETAILS:
Manufacturer: Longacre
Manufacturer Part Number: 22547
Style: Panoramic / Convex
Size: 17"
Housing: Aluminum/ABS Plastic
For a bigger and better field of rear vision, replace your factory rear view mirror with one of these 17" Panoramic mirrors from Longacre Racing. These mirrors are also a direct replacements for those in Longacre Racing's mirror kits.
Alpinestars
Alpinestars Race v4 Nomex Socks
$52.95
Alpinestars Race v4 Nomex Socks
Alpinestars Race v4 Socks are lightweight, durable and ergonomically designed to meet the demands of the world top drivers. Certified to FIA homologation standards, these socks offer excellent protection from heat transfer and flat seams for long-lasting comfort.
ALPINESTARS RACE V4 NOMEX SOCK PROTECTION
Certified to the new FIA 8856-2018 homologation standard.
AiM Sports
AiM Solo DL CAN/RS232 Wiring Harness (Old Solo DL)
$52.00
AiM CAN 7-Pin to CAN/RS232 Wiring Harness for Solo DL
Moving your original AiM Solo DL from one car to another and need another harness for only power or both power and data input, this is your cable. If you are putting a Solo DL into an older vehicle and need a power supply cable, use this and use only the + and - wires and fold back the can inputs.
This harness connects your SoloDL to your ECU via CAN or RS232 wiring. One end has a 7-pin 712 (screw-in) connector to fit the SoloDL, and the other has 6 non-terminated wires (CAN+, CAN-, RS232RX, RS232TX, Power, and Ground).
Does not fit the new AiM Solo2 DL.
AiM CAN 7-Pin to CAN/RS232 Wiring Harness for Solo DL Details:
Manufacturer: AiM
Manufacturer part number: V02569080
Manufacturer alternate part number: MC-569
Fits Solo DL: Yes
Fits Solo 2 DL: No
Fits Solo Base Model: No
Fits Solo 2 Base Model: No
Length: 2 meters
Pins on AiM Solo DL Side: 7 Pin Thread on connector
Vehicle Chassis Ends: 6 Non terminated wires
Vehicle Chassis Ends Break Out: CAN+, CAN-, RS232RX, RS232TX, Power, and Ground (and one unused)
Note: Not compatible with the original SmartyCam (gray unit with the viewing screen on top) or the later SmartyCam HD "Rev 1". The version 1 can be identified by a 7/8" diameter lens with either a 67 or 87 degree field of view, and a viewfinder flush with the front of the housing. Later SmartyCam HD Rev 2 had a larger 1 3/8" OD lens marked as 60 or 120 degree field of view and a cover over the front viewfinder held on by 8 screws.
1 - CAN+ (white)2 – GND (black)3 – 12v (red)4 - CAN- (blue)5 – K-Line (blue or orange)6 - N/A
AiM Sports
AiM Solo DL to OBD-II Connector (Old Solo DL)
$52.00
AiM CAN 7-Pin to OBD-II (K-Line Connector) Cable for Solo DL
AiM Solo DL to OBD-II Port Connection Cable On Your Car For Easy Addition of RPM and other vehicle data. One end has the K-Line (OBD-2) plug to fit the diagnostic port, and the other end has a 7-pin 712 (screw-in) connector for the Solo DL. OBD-II is also known as K-Line
This is the same cable supplied with the original AiM Solo DL for OBD-II.
Does not fit the new Solo2 DL.
AiM CAN 7-Pin to OBD-II (K-Line Connector) Cable for Solo DL Details:
Manufacturer: AiM
Manufacturer part number: V02569010
AiM Alternate part number: MC-568
End 1: AiM 7 Pin 712 (thread on)
End 2: OBD-2 (K-Line)
Fits AiM Solo: No
Fits AiM Solo DL: Yes
Fits AiM Solo 2: No
Fits AiM Solo2 DL: No
Note: Not compatible with the original SmartyCam (gray unit with the viewing screen on top) or the later SmartyCam HD "Rev 1". The version 1 can be identified by a 7/8" diameter lens with either a 67 or 87 degree field of view, and a viewfinder flush with the front of the housing. Later SmartyCam HD Rev 2 had a larger 1 3/8" OD lens marked as 60 or 120 degree field of view and a cover over the front viewfinder held on by 8 screws.
AiM Sports
AiM Solo 2 DL RPM and Power Wiring Harness
$52.00
AiM Solo 2 DL RPM and Power Wiring Harness
The AiM V02589020, called the AiM Solo 2 DL RPM Input Wire, is used to connect your AiM Solo 2 DL to an older generation (non-ECU) vehicle. On the bottom right of your Solo 2 DL there is an 8 pin connector that you can connect to the low voltage side of your coil. The peak can be anywhere from 150 to 400 V or from a square wave with a peak of 5 to 50 V.
If you have a vehicle with no ECU or OBD-2 Port or a MSD ignition box, this is your easiest way to log RPM. By connecting the positive and negative wires, your Solo 2 DL unit will automatically top off the internal battery and power all down line appliances, such as SmartyCams and other powered devices.
AiM Solo 2 DL RPM Input Wire Details:
Manufacturer: AIM
Manufacturer part number: V02589020
End 1: Male 712 8 Pin Screw-in
End 2: Flying lead (open wires) 12 V Positive , Negative, and RPM input
Length: 2 Meters
AiM Solo 2 DL RPM Input Wire Uses:
Solo 2 DL to older external coil engines
Solo 2 DL to RPM tach lead
Solo 2 DL to MSD ignition box
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Trac-Com
Stilo to Chatterbox (3.5mm) Adapter Cable
$52.00
$59.95
Stilo to Chatterbox (3.5mm) Adapter Cable (36" length)
This cable can be used to connect several types of devices to your Stilo helmet. Includes 3.5mm right angle connector on one end and Stilo male IMSA connector on the other. Made in the USA from thin ROHS-compliant cable.
FEATURES:
Connects to Chatterbox Tandem Pro 2
Connects to Chatterbox DUO
Connects to cell phones that use a 3.5mm earphone jack
Alpinestars
Alpinestars Sequence Youth Neck Roll
$51.95
Alpinestars Sequence Karting Neck Roll
Designed and developed specifically for younger riders, the Sequence Youth Neck Roll is the starting point on a junior driver journey to the Bionic Neck Support. Ergonomically profiled for a young rider body requirement, the Sequence Neck Roll frame is designed to transfer impact energy away from the upper neck.
CONSTRUCTION
New hybrid kids neck protection with extended tail for high position stability.
Ergonomic designed and engineered shape to fit kids from 6 10 yrs. and from 10-14 yrs.
Double density core is made from a soft PU foam base embedding a hard layer EVA for energy dissipation.
Bottom and internal soft section (neck side) provides comfort for the shoulder and neck, hard section on the upper part to give stability and provides force distribution when the helmet is impacting.
KEY FEATURES
Easy to use soft strap closure on the front part.
Highly compatible with all other protectors and jackets.
External cover can be pulled of core for washing by Velcro opening on the rear.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo ST5 Hydration Kit
$50.95
$59.95
Stilo ST5 Helmet Hydration Kit
Hydration bite-valve kit designed specifically for the Stilo GT helmets.
STILO HYDRATION KIT INCLUDES
(1) Male hydration connector
(1) Female hydration connector
(1) Hydration tube
(1) Bite valve
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AiM Sports
AiM Trackday Kit Short Cable for SmartyCam 3 and Solo 2 DL
$50.00
$77.00
AiM Trackday Kit Short Cable for SmartyCam 3
The AiM Trackday kit mount offers a neat solution for connecting your Solo 2 DL & SmartyCam 3 without dealing with the 2 meter cable normally included with the Smartycam. If you need the mount for your Solo 2 and SmartyCam 3, that can be found here!
AiM Trackday Kit Short Cable for SmartyCam 3 & Solo 2 DL Details:
Manufacturer: AiM Technologies
Manufacturer Part Number: V02554910
Cable Length: Approx 7"
712 5-pin male to 712 5-pin male
AiM Sports
AiM 5 Pin 712 -712 CAN / GPS Extension Cable
from $50.00
AiM 5 Pin 712 -712 CAN / GPS Extension Cable
AiM GPS & CAN extension cable with the 5 pin male going to a 5 pin female connector. The 712 5 pin has 5 pins and a chrome threaded barrel (screw-in) connection. These extension cables are used to lengthen any CAN cable to provide a perfect installation. We use the AiM 712-715 patch cable to lengthen an AiM GPS08 antenna, Data Hub or any other CAN item. These are male on one side and female on the other side, so connecting them is series is allowed.
This cable will fit between a SmartyCam GP process and lens, but will not work. You need the AiM SmartyCam GP LVDS Cable for this.
AiM 5 Pin 712 -712 CAN / GPS Extension Cable Details:
Manufacturer: AIM
Manufacturer part number Patch cable, 1m 712 5-pin/m to 712, 5-pin/f CAN: V02552700
Manufacturer part number Patch cable, 2m 712 5-pin/m to 712, 5-pin/f CAN: V02552720
Manufacturer part number Patch cable, 3m 712 5-pin/m to 712, 5-pin/f CAN: V02552730
Manufacturer part number Patch cable, 4m 712 5-pin/m to 712, 5-pin/f CAN: V02552740
End 1: Male 712 5 Pin Screw-in
End 2: Female 712 5 Pin Screw-in
AiM 5 Pin 712 -712 CAN / GPS Extension Cable Common Uses
CAN Extension
GPS Extension
Data Hub Extension
AiM 5 Pin 712 -712 CAN / GPS Extension Cable Lengths Available:
1 Meter (39")
2 Meter (78")
3 Meter (118")
4 Meter (156")
