Sparco EVO Performance Carbon Fiber (STD, L, XL) Racing Seat
Sparco S.p.A. Sparco EVO Performance Carbon Fiber (STD, L, XL) Racing Seat $2,350.00
Sparco EVO Performance Carbon Fiber Racing Seat The Sparco EVO Performance Carbon Fiber Racing Seat represents the pinnacle of Sparco's legendary EVO seat lineup, combining ultra-lightweight dry carbon fiber construction with premium leather and Alcantara upholstery. Designed for drivers who demand the ultimate blend of motorsport performance, comfort, and luxury, the EVO Performance Carbon delivers race-proven support while looking equally at home in a dedicated track car or a high-end street build. Constructed from aerospace-grade pre-preg carbon fiber, the EVO Performance Carbon is one of the lightest racing seats available. Weighing less than 10 pounds as a bare shell and approximately 12 pounds complete with upholstery and padding, it offers exceptional strength, rigidity, and weight savings for serious performance enthusiasts. Building on the success of the EVO platform, Sparco refined the design with narrower shoulder bolsters for improved fitment in compact vehicles, lower side bolsters for easier ingress and egress, and raised harness openings to better accommodate drivers of varying heights. The result is a competition seat that fits where many other racing seats cannot, making it a popular choice for vehicles such as the Mazda Miata, Porsche Cayman, Toyota GR86, Subaru BRZ, and other compact sports cars. Premium Carbon Fiber Construction The EVO Performance Carbon is manufactured using Sparco's pre-preg dry carbon fiber technology, delivering an exceptional strength-to-weight ratio while maintaining the durability required for motorsport competition. Combined with premium leather bolsters and an Alcantara center section, the EVO Performance Carbon offers a level of refinement rarely found in a true FIA-approved racing seat. Sparco EVO Performance Carbon Features Ultra-lightweight pre-preg dry carbon fiber shell Premium leather and Alcantara upholstery FIA 8855-1999 homologated racing seat Less than 10 lb shell weight Approximately 12 lb complete weight with upholstery Improved fitment for compact vehicle cockpits Narrowed shoulder bolsters for increased clearance Lower side bolsters for easier entry and exit Raised harness guides for improved belt positioning High-grip materials in key support areas Excellent ergonomics and driving position Ideal for track cars, club racing, endurance racing, and premium street builds Why Choose the EVO Performance Carbon? The EVO series features one of the most comfortable seating positions in the Sparco lineup thanks to its optimized seat-back angle and ergonomic design. Combined with the weight savings of dry carbon fiber construction and premium upholstery materials, the EVO Performance Carbon offers exceptional comfort during long track sessions while maintaining the support needed for competitive driving. Its compact external dimensions make it particularly well-suited for smaller sports cars where space is limited but driver support remains critical. Available Sizes EVO Carbon – Medium (up to approximately 34" waist) EVO L Carbon – Large (up to approximately 36" waist) EVO XL Carbon – X-Large (up to approximately 38" waist) Technical Specifications Homologation: FIA 8855-1999 Shell Material: Aerospace-Grade Pre-Preg Carbon Fiber Upholstery: Leather and Alcantara Shell Weight: Less than 10 lb (4.5 kg) Weight with Upholstery: Approximately 12 lb (5.4 kg) Mounting Type: Side Mount Available Sizes: Medium, Large, X-Large EVO Carbon Racing Seat Dimensions EVO L / EVO XL Dimensions ```
Sparco-QRT-Performance-Carbon-Fiber-Performance-Seat-Profile-Image
Sparco S.p.A. Sparco QRT-C Performance Carbon Fiber Racing Seat $2,350.00
Sparco QRT-C Performance Carbon Fiber Racing Seat The Sparco QRT-C Performance Carbon Racing Seat combines ultra-lightweight carbon fiber construction with premium Italian craftsmanship, creating one of the most exclusive FIA-approved racing seats available. Built on the same race-proven shell as the Sparco QRT-C competition seat, the QRT-C Performance Carbon elevates the driving experience with hand-finished Italian leather, Alcantara upholstery, and exceptional comfort for both track and street applications. Constructed from aerospace-grade pre-preg carbon fiber, commonly referred to as dry carbon, the QRT-C Performance Carbon delivers an extraordinary strength-to-weight ratio while maintaining the support and safety demanded by serious motorsport enthusiasts. Each seat is hand-stitched at Sparco's OEM manufacturing facility in Torino, Italy, ensuring exceptional attention to detail and premium quality throughout. The innovative shell design features a lower seating position that accommodates taller and larger drivers while maintaining compact exterior dimensions for improved fitment in smaller sports car cockpits. Whether installed in a Porsche, Corvette, BMW, Lotus, or dedicated track machine, the QRT-C Performance Carbon delivers race-ready support with luxury-grade refinement. Ultra-Lightweight Dry Carbon Construction The QRT-C Performance Carbon utilizes aerospace-grade pre-preg carbon fiber technology to create an exceptionally strong and lightweight shell. This advanced manufacturing process produces a rigid structure that maximizes driver feedback while minimizing overall vehicle weight. Unlike conventional fiberglass racing seats, the dry carbon construction provides superior stiffness and weight reduction, making the QRT-C Performance Carbon an excellent choice for performance-focused builds where every pound matters. Luxury Meets Motorsport Engineering Premium Italian leather bolsters are paired with Alcantara seating surfaces to create an interior experience worthy of the world's finest performance vehicles. The combination delivers exceptional comfort during long drives while maintaining the grip and support required during aggressive track use. The QRT-C Performance Carbon is equally at home in a high-end street build, track-day car, or endurance racing application where comfort and aesthetics are as important as performance. Sparco QRT-C Performance Carbon Features Aerospace-grade pre-preg dry carbon fiber shell Premium Italian leather and Alcantara upholstery Handcrafted in Torino, Italy FIA 8855-1999 homologated racing seat Lower seating position for taller and larger drivers Compact exterior dimensions for improved cockpit fitment Excellent lateral support and driver containment Designed to accommodate drivers up to approximately a 36-inch waist Harness openings fit a wide range of driver sizes HANS-compatible design Fire-retardant materials High-grip anti-slip inserts for enhanced driver stability Driver Fitment The Sparco QRT-C Performance Carbon is designed to comfortably accommodate medium-to-large drivers and is generally suitable for drivers up to approximately a 36-inch waist. Its optimized shell design provides excellent support while maintaining compatibility with many compact sports car interiors. Technical Specifications Homologation: FIA 8855-1999 Shell Material: Pre-Preg Dry Carbon Fiber Upholstery: Italian Leather and Alcantara Mounting Type: Side Mount Harness Compatibility: Multi-Point Racing Harnesses HANS Compatible: Yes Driver Fitment: Up to approximately 36-inch waist Manufactured In: Italy Why Choose the Sparco QRT-C Performance Carbon? The QRT-C Performance Carbon offers a rare combination of professional motorsport safety, ultra-lightweight carbon fiber construction, and luxury automotive craftsmanship. It delivers the support and protection of a true FIA-approved racing seat while elevating your vehicle's interior with premium Italian materials and hand-built quality. For enthusiasts seeking one of the most advanced and refined carbon fiber racing seats available, the Sparco QRT-C Performance Carbon stands at the top of the category. Sparco QRT-C Performance Carbon Dimensions
Racetech RT4119W Racing Seat lowest price
Racetech Manufacturing Limited Racetech RT4119W Racing Seat from $2,299.00
Racetech RT4119W Racing Seat The Racetech RT4119W Racing Seat is based on Racetech's highly successful 119 Series platform, delivering the same exceptional ergonomics, driver support, and patented back-mount technology in a configuration without head restraints. Designed specifically for applications where improved visibility and easier ingress and egress are desired, the RT4119W and RT4119WT are ideal for track-day cars, HPDE vehicles, off-road race trucks, pro-touring builds, and outlaw drag cars. Derived from the RT4119WHR and RT4119WTHR competition seats, these models retain Racetech's race-proven shell design and unique back-mount system, which provides superior chassis feedback, increased seat stability, and reduced driver fatigue compared to conventional floor-mounted racing seats. Available in Wide and Wide & Tall configurations, the RT4119W can be further customized with optional low-profile base cushions and side cushions to achieve the ideal fit and support for a wide range of drivers. Purpose-Built for HPDE and Track-Day Vehicles By eliminating the integrated head restraints found on FIA-approved competition models, the RT4119W offers improved peripheral visibility and easier access to the cockpit. This makes it particularly popular in street-based track cars, vintage race cars, off-road vehicles, and applications where head restraints may interfere with vehicle operation or driver comfort. Note: The RT4119W and RT4119WT are not FIA-homologated racing seats and are intended for applications where FIA certification is not required. Mounting Options Side Mount Installation: Compatible with Racetech RTB1009M 5mm aluminum side-mount brackets (sold separately). Back Mount Installation: Compatible with the Racetech RTB2115B shoulder bracket and RTB2005C roll cage clamps. RTB2115B Bracket: Attaches directly to the seat's shoulder beam to provide additional support and rigidity. RTB2005C Clamps: Available for 38mm (1.5"), 41mm (1.625"), and 45mm (1.75") roll cage tubing diameters. Racetech RT4119W Features Race-proven Racetech 119 Series shell design Patented back-mount compatible construction Improved visibility without integrated head restraints Lightweight fiberglass composite (GRP) shell Gloss black gel-coat finish Black fire-retardant upholstery Durable perforated leather wear patches Ideal for HPDE, track-day, off-road, pro-touring, and drag racing applications Available in Wide and Wide & Tall sizes Technical Specifications FIA Homologation: None Shell Material: Fiberglass Composite (GRP) Shell Finish: Gloss Black Gel-Coat Upholstery: Black Fire-Retardant Fabric Wear Panels: Black Perforated Leather Minimum Shell Weight: 7.0 kg (15.5 lb) Air Ducting: Not Available Mounting Type: Side Mount and Back Mount Compatible Available Sizes: Wide (W) and Wide & Tall (WT) Available Sizes RT4119W – Wide RT4119WT – Wide & Tall Why Choose the Racetech RT4119W? The Racetech RT4119W offers the comfort, support, and driver feedback that have made the 119 Series a favorite among racers worldwide while improving visibility and cockpit accessibility. For HPDE enthusiasts, track-day drivers, off-road racers, and custom vehicle builders who don't require FIA homologation, the RT4119W provides an outstanding combination of comfort, performance, and value. ```
Pro_Racer_SPG_Ultra_ORV_Seat_Image
Recaro Holding GmbH Recaro Pro Racer SPG Ultra ORV Racing Seat $2,295.00
Recaro Pro Racer SPG Ultra ORV Racing Seat In motorsport, your faith in the quality and reliability of your equipment must be absolute if you’re going to win. The Pro Racer SPG Ultra ORV is specially designed to address off-road race cars requirements and certified to FIA standard 8855-1999. It is ergonomically designed to provide outstanding support, while offering protection for the back and neck against all the forces of an off-road race course. A Safe Seat Makes for a Sure Win The specially designed head surround (for better visibility), the friction grip surface around the shoulders, and the highly-effective energy-absorbing ENRg+™ Performance cushion foam are all essential when pushing off-road race vehicles to the limit. The seat is suitable for 4-, 5- or 6-point belts as well as HANS/FHR systems. Its particularly robust cover materials are both weather and abrasion resistant. This is the Ultra version to accommodate larger drivers. Check out the XL version here if you need slightly smaller seat dimensions.  Recaro Pro Racer SPG Ultra ORV Racing Seat Details Seat in Ultra-sized version to fit larger drivers Weight: ~20.6 lbs (9.4 kg) FIA 8855-1999 certified and crash tested, good for five years Suitable to work with head and neck safety systems Shock-absorbent ENRg+™ Performance* cushion foam Highly flame-retardant upholstery (FMVSS 302) Suitable for 4-, 5-, 6-point belt (racing use) Seat shell glass fiber reinforced polymer (GFRP) Designed for use in off-road vehicles Robust cover materials are both weather and abrasion resistant
Sparco-Pro-Master-8855-2021-Racing-Seat-PROFILE-IMAGE
Sparco S.p.A. Sparco Pro Master 8855-2021 Racing Seat from $2,200.00
Sparco Master 8855-2021 Racing Seat Special Order Item: Estimated lead time 8-10 weeks. Non-cancelable and non-returnable. The Sparco Master 8855-2021 Racing Seat represents the next generation of FIA-approved racing seat technology, combining advanced safety, exceptional comfort, and long-term durability in a professional-grade competition seat. Engineered to meet the latest FIA 8855-2021 homologation standard, the Master is designed for serious racers who demand the highest levels of driver protection and performance. Featuring an ergonomic shell design, adjustable support cushions, and advanced impact-management technology, the Sparco Master delivers outstanding comfort during long race sessions while maintaining the support and containment required for professional motorsport competition. One of the most significant advantages of the Master is its FIA 8855-2021 homologation, which allows for a 10-year service life when installed with the approved Sparco side mounting brackets. This extended homologation period can significantly reduce long-term ownership costs while ensuring compliance with current racing regulations. *Requires Sparco Side Mount Bracket 004919 to qualify for FIA's full 10-year homologation period. Built to the Latest FIA 8855-2021 Standard The FIA 8855-2021 standard is the newest generation of FIA seat homologation, introducing enhanced testing requirements for strength, impact protection, energy absorption, and durability. Compared to previous standards, FIA 8855-2021 seats are engineered to provide improved protection in severe racing incidents while offering a longer homologation period. The Sparco Master was developed to meet these stringent requirements, making it an excellent choice for road racing, endurance racing, GT competition, club racing, and professional motorsport applications. Sparco Master 8855-2021 Features FIA 8855-2021 homologated racing seat Eligible for 10-year FIA homologation period when used with approved Sparco side mounts Professional-grade fiberglass composite shell construction Advanced impact-energy management design Integrated head and shoulder containment system Adjustable side and backrest support cushions Optimized ergonomics for reduced driver fatigue Breathable fire-retardant upholstery materials Excellent lateral support and driver containment Designed for modern professional motorsport applications Why FIA 8855-2021 Matters FIA 8855-2021 is the latest global standard for racing seat safety and durability. Seats certified to this standard undergo extensive testing to evaluate: Impact Resistance: Ability to withstand high-energy crash loads. Structural Strength: Enhanced shell rigidity and load-bearing capacity. Flame Resistance: Compliance with FIA fire-safety requirements. Durability: Long-term performance under racing conditions. Driver Protection: Improved occupant support during impact events. For racers competing under modern FIA regulations, FIA 8855-2021 homologation provides confidence that the seat meets the latest safety requirements recognized throughout international motorsport. Technical Specifications Homologation: FIA 8855-2021 Homologation Duration: Up to 10 years when installed with approved Sparco side mounts Seat Type: Competition Racing Seat Shell Construction: Fiberglass Composite Mounting Type: Side Mount Harness Compatibility: Multi-Point Racing Harnesses HANS Compatible: Yes Upholstery: Fire-Retardant Fabric Why Choose the Sparco Master 8855-2021? The Sparco Master delivers everything serious racers demand: FIA's latest safety certification, exceptional comfort, professional-grade containment, and an extended 10-year homologation period. Whether you're competing in endurance racing, club racing, GT competition, or professional motorsport, the Master provides the protection, durability, and confidence needed to perform at your best. For drivers looking to maximize both safety and long-term value, the Sparco Master stands among the most advanced FIA 8855-2021 racing seats available. Sparco Master 8855-2021 Dimensions ```
Pro_Racer_SPG_XL_ORV_Seat_Image
Recaro Holding GmbH Recaro Pro Racer SPG XL ORV Racing Seat $2,195.00
Recaro Pro Racer SPG XL ORV Racing Seat In motorsport, your faith in the quality and reliability of your equipment must be absolute if you’re going to win. The Pro Racer SPG XL ORV is specially designed to address off-road race vehicle requirements and is certified to FIA standard 8855-1999. The Pro Racer SPG XL ORV is ergonomically designed to provide outstanding support while offering protection for the back and neck against all the forces of an off-road race course. Specially Designed To Be A Game Changer Off-Road The specially-designed head surround (for better visibility), the friction grip surface around the shoulders, and the highly-effective energy-absorbing ENRg+™ Performance cushion foam are all essential when pushing off-road race vehicles to the very limit. The Recaro Pro Racer SPG XL ORV racing seat is suitable for 4-, 5- or 6-point belts as well as HANS/FHR systems. Its particularly robust cover materials are both weather- and abrasion-resistant. Also available in an Ultra version for larger drivers. Recaro Pro Racer SPG XL ORV Racing Seat Details Seat in XL version Suitable to work with head and neck safety systems Shock-absorbent ENRg+™ Performance* cushion foam Highly flame-retardant upholstery (FMVSS 302) Suitable for 4-, 5-, 6-point belt (racing use) Seat shell glass fiber reinforced polymer (GFRP) Designed for use in off-road vehicles Robust cover materials are both weather and abrasion resistant FIA certified and crash tested Recaro Pro Racer SPG XL ORV Racing Seat Dimensions (in inches)
Sold out
Sparco-ADV-XT-Racing-Seat-8855-2021-PROFILE-IMAGE
Sparco S.p.A. Sparco ADV XT Racing Seat | FIA 8855-2021 from $2,100.00
Sparco ADV XT 8855-2021 Racing Seat Special Order (8-10 weeks) & Non-Refundable Elevate Your Racing Performance with the Sparco ADV XT 8855-2021 Racing Seat. Now you can enjoy your new race seat for up to 10 years. (Requires Sparco Side Mount 004932 in order to qualify for the 10 year FIA certification. You can select this side mount when ordering your seat.) ELEVATE YOUR RACING PERFORMANCE Introducing the Sparco ADV XT 8855-2021 Racing Seat, the pinnacle of racing comfort and safety. Designed to meet the rigorous standards of the FIA 8855-2021 certification, this seat combines cutting-edge technology with exceptional craftsmanship to deliver an unparalleled racing experience.Safety is paramount in motorsport, and the Sparco ADV XT Racing Seat is engineered to provide uncompromising protection. Constructed with a sturdy tubular frame and utilizing high-quality materials, this seat ensures exceptional durability and resilience. It has been rigorously tested to meet the stringent FIA 8855-2021 safety standards, providing you with the confidence to push your limits on the track.But the Sparco ADV XT Racing Seat doesn't stop at safety. It also delivers exceptional comfort, keeping you focused and comfortable during those intense racing sessions. The ergonomic design conforms to your body, providing optimal support and reducing driver fatigue. With its plush padding and premium upholstery, this seat enhances your overall comfort, enabling you to maintain peak performance throughout every race.Experience precision control like never before with the Sparco ADV XT Racing Seat. Its advanced design features integrated side and backrest bolsters that can be easily adjusted to your preferences. This customizable fit ensures optimal stability, allowing you to make precise maneuvers with ease, giving you the competitive edge you need to outperform your rivals.Visually striking and flawlessly crafted, the Sparco ADV XT 8855-2021 Racing Seat is a true embodiment of style and functionality. Its sleek and aerodynamic design, complemented by intricate stitching and attention to detail, will make a statement in any race car interior.When it comes to performance, safety, and comfort, the Sparco ADV XT 8855-2021 Racing Seat exceeds expectations. Its 10-year 8855-2021 certification highlights its exceptional quality and long-lasting durability, ensuring it will be your trusted companion for countless racing adventures.Take your racing experience to the next level with the Sparco ADV XT 8855-2021 Racing Seat. Unlock unparalleled safety, comfort, and performance on the track. Don't settle for anything less than the best—choose Sparco and dominate the competition. WHAT IS 8855-2021 CERTIFICATION? The FIA 8855-2021 certification is a safety standard established by the Fédération Internationale de l'Automobile (FIA), the governing body for motorsport. It specifically pertains to racing seats and sets forth a set of stringent criteria that must be met to ensure the highest level of safety for drivers.The certification encompasses a range of requirements related to the design, construction, and performance of racing seats. These requirements include: Impact Resistance: Racing seats must be able to withstand high-impact forces and provide effective protection to the driver in the event of a crash. They undergo rigorous testing to ensure they can withstand these forces without compromising driver safety. Load-Bearing Capacity: Racing seats are subjected to tests to determine their load-bearing capacity. This ensures that they can support the weight of the driver and maintain their structural integrity under intense racing conditions.Flame Resistance: Racing seats must be constructed from materials that are resistant to fire. This is crucial in motorsport, as a fire incident can occur in the event of a crash. The FIA 8855-2021 certification requires seats to meet specific flame resistance standards to enhance driver safety. Durability: Racing seats undergo tests to evaluate their durability over an extended period of time. This ensures that they can withstand the demands of racing, including vibrations, impacts, and repeated use, without compromising their structural integrity.It is important for racers to choose seats that are certified under the FIA 8855-2021 standard, as it ensures they are investing in a product that meets the highest safety standards set by the governing body of motorsport. By selecting FIA-certified seats, drivers can have confidence in the safety and performance of their racing equipment, allowing them to focus on pushing their limits on the track. The 10-year 8855-2021 certification is a remarkable achievement that sets the Sparco Master Racing Seat apart from its competitors. This certification signifies that the seat meets the rigorous safety standards established by the Fédération Internationale de l'Automobile (FIA), the governing body for motorsport safety.The FIA 8855-2021 standard is specifically designed to ensure the highest level of safety for racing seats. It encompasses a comprehensive set of criteria that must be met, including impact resistance, load-bearing capacity, flame resistance, and durability. Undergoing rigorous testing and evaluation, the Sparco Master Racing Seat has proven its ability to withstand extreme conditions and provide optimal protection to the driver.The 10-year certification is a testament to the seat's exceptional build quality and longevity. It means that the Sparco ADV XT Racing Seat is built to last, with materials and construction techniques that are designed to withstand the demands of competitive racing over an extended period of time. This certification provides peace of mind to racers, knowing that their investment in the Sparco ADV XT Racing Seat will serve them well for many years to come.Moreover, the 10-year certification demonstrates Sparco's commitment to excellence and their dedication to ensuring the highest level of safety in motorsports. Sparco, renowned for their expertise in producing high-performance racing equipment, has consistently pushed the boundaries of innovation to deliver products that meet and exceed industry standards.Choosing a racing seat with a 10-year 8855-2021 certification means you're making a wise investment in your safety and long-term racing endeavors. It's a clear indication that the Sparco ADV XT Racing Seat has undergone rigorous testing, proven its exceptional quality, and is recognized by the FIA as a product that meets the highest safety standards. SPARCO ADV XT RACING SEAT DIMENSIONS
Racetech RT4200HR Race Seat Profile image
Racetech Manufacturing Limited Racetech RT4200HR Racing Seat from $2,089.00
Racetech RT4200HR Racing Seats The RT4200 Series builds upon the widely-respected RT4100 shell geometry with increased rib support and enhanced head restraint foaming for additional safety and comfort. Driver fitment is also designed to be more secure through the rib and torso. Racetech’s segment-leading features such as our exclusive back-mounting system, pronounced thigh support, molded base cushion, parallel sides, and flush bosses for ease of mounting make this seat series hard to beat. From the meticulously stitched fire-resistant fabric to the lightweight, resin-infused shells, all Racetech seats are handcrafted in Wellington, New Zealand. Racetech 4200HR Racing Seat Homologation All sizes have been rigorously tested to meet FIA 8855-1999 safety and durability regulations Certification lifespan of five years can be extended with a back mount connected to the vehicle’s roll cage If your sanctioning body does not require use of seats with FIA or SFI certification, you may select “No FIA Decal” from the dropdown above FIA hologram decals will not be included if you choose “No FIA Decal.” Seats without the FIA hologram decals increase safety affordability as seat lifespan is not limited Comparison to Standard Size RT4200HR Tall (RT4200THR): 2.36 in. / 60mm taller Wide and Tall (RT4200WTHR): 2.36 in. / 60mm taller and 1.57" / 40mm wider Mounting Hardware: 4200 Series seats use Racetech RTB1009M aluminum or RTB2009S steel side mount brackets. Racetech RT4200HR Racing Size Chart Racetech RT4200HR Racing Seat Details Application Common Applications From clubsport to national-level circuit and rally Stock Color / Material Gel-coat Gloss black Seat Cover Black fire-retardant nylon fabric with Spacer mesh in the shoulders Wear Patches Spacer Technical FIA Homologation FIA 8855-1999 certification available Shell Construction Fiberglass Composite Shell Weight From 6.1kg (13.5lbs) Sizes HR - StandardTHR - TallWTHR - Wide & Tall Design Head Restraint Integrated head restraint HANS Compatible Yes Harness Compatibility Up to 6-point harness Large Harness Guides Yes Air Ducting N/A Back-mount Compatible Yes Back-mount Required for FIA Homologation No
Sparco-Circuit-Carbon-Fiber-Racing-Seats-(Circuit-II-QRT)-profile-image
Sparco S.p.A. Sparco Circuit/Circuit II QRT Carbon Fiber Racing Seat $2,049.00
Sparco Circuit / Circuit II Carbon Fiber Racing Seat The Sparco Circuit Carbon is the carbon fiber version of the Circuit QRT which is a competition seat designed to provide additional head and neck protection. It is constructed with light weight “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The Circuit Carbon includes integrated bolsters to protect the head from lateral impacts. This seat can be used with an FHR (frontal head restraint) device for even greater protection. The ultra-light shell is features impact-absorbing material surround on the headrest. It has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The Circuit Carbon is FIA 8859-1999 approved. SPARCO CIRCUIT CARBON FIBER RACE SEAT TECHNOLOGY Ultralight pre-preg carbon fiber shell Excellent fitment (for a head restraint seat) into smaller cockpits Excellent ergonomics Fire-retardant fabric Special non-slip fabric FIA 8859-1999 homologated The Sparco Circuit Carbon Fiber is an ultra-light competition seat specifically designed for circuit use. Made from carbon fiber, the Sparco Circuit Carbon Fiber has an ultra-light shell. The Sparco Circuit Carbon Fiber includes integrated bolsters to protect the head. This seat can be used with a Hans device for even greater protection. The ultra-light shell is then wrapped in an impact-absorbing and fire retardant fabric that helps hold the body. The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear. The Sparco Circuit Carbon Fiber is FIA 8855-1999 approved and available in two sizes: Circuit (Standard) and Circuit II (Large). The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear. SPARCO CIRCUIT SIZING Small / Narrow – up to a 32” waist (pants size) SPARCO CIRCUIT II SIZING Medium – up to a 36” waist (pants size)
Sold out
recaro-pro-racer-spg-velour-black-Seat-Image
Recaro Holding GmbH Recaro Pro Racer SPG Racing Seat $1,995.00
Recaro Pro Racer SPG Racing Seat All race drivers want to win. That’s the goal. And winning starts with how you fit in the car and relate ergonomically to its controls. The Recaro Pro Racer SPG racing seat provides optimized body support during high g-force events, keeping you firmly in the right place to do your job. The Recaro Pro Racer SPG also gives you great long term comfort, and it is this combination of comfort and support that gives you a competitive edge in driving performance. The Recaro Pro Racer is Recaro's premium product for GT and touring cars. Built to the FIA 8855-1999 standard, the Pro Racer was developed for HANS driver safety systems and comes in four versions. This is the standard-sized Pro Racer SPG. The seat is available in glass fiber reinforced polymer (GFRP) here, and in various sizes, including an XL option for drivers of larger build. The Pro Racer fits like a glove. And the FIA-homologated flexible side-mount accommodates any driver’s physique with ease. RECARO PRO RACER SPG RACING SEAT DETAILS Shock-absorbent foam Highly flame-retardant upholstery (FMVSS 302) FIA 8855-1999 approval for five years Suitable for 4-, 5-, 6-point belt (racing use) Seat shell glass fiber reinforced polymer (GFRP) Flexible side-mount (fore-aft adjustment for preferred sitting positions) Competition Seat (FIA 8855-1999) Suitable to work with head and neck safety systems The XL version, available here, is 1.4 inches wider and 2.0 inches higher than the standard size Racing Seat Dimensions:
SPARCO-LEGEND-MARTINI-BLUE-008021MRBM-FRONT-image
Sparco S.p.A. Sparco Martini Legend Kevlar Racing Seat $1,950.00
Sparco Martini Legend Kevlar Racing Seat Rev up your racing experience with the Sparco Martini Legend Kevlar race seat, a meticulously crafted seat with a winning combination of Kevlar and carbon fiber. Engineered for unparalleled performance, safety and style, this race seat is the pinnacle of motorsport excellence. With its exceptional construction and iconic design, it's no wonder this seat is at the top of every racing enthusiast's wishlist. SPARCO: UNRIVALED PERFORMANCE The Sparco Martini Legend Kevlar race seat boasts an innovative construction that combines lightweight Kevlar and dry carbon fiber. This fusion provides outstanding strength, rigidity, and durability while maximizing safety. The seat's ergonomic design ensures maximum comfort during intense races, allowing you to maintain full control of your vehicle at high speeds. SPARCO MARTINI LEGEND SUPERIOR SAFETY FEATURES Safety is of utmost importance in motorsports, and the Sparco Martini Legend Kevlar race seat excels in this aspect. It meets the stringent FIA 8855-1999 safety standard, guaranteeing optimal protection in an impact. The seat features integrated head and shoulder protection, bolstered side supports, and deep thigh cushions to minimize the risk of injury. With this seat, you can race with confidence, knowing that your well-being is prioritized. ICONIC SPARCO MARTINI RACING STYLE Stand out on the track with the legendary Martini Racing design adorning the Sparco Martini Legend Kevlar race seat. The iconic Martini Racing colors are proudly displayed on this seat, instantly recognizable by racing enthusiasts worldwide. This timeless aesthetic, combined with the impeccable craftsmanship of Sparco, creates a seat that not only performs but also captivates attention. Join the elite ranks of motorsport legends and elevate your racing to new heights with the Sparco Martini Legend Kevlar race seat. Immerse yourself in the race with its Kevlar and carbon fiber construction, delivering unrivaled performance, safety, and iconic style. Don't settle for anything less than the best – equip yourself with a seat that embodies the essence of motorsport excellence. Purchase yours today and experience the thrill of true racing mastery. SIZING Medium / Large (up to 36” waist) TECHNOLOGY Ultra lightweight dry carbon/Kevlar shell Bottom mount only Excellent ergonomics FIA 8855-1999 approved DIMENSIONS
Sparco-Ultra-Carbon-Fiber-Race-Seat-front-image
Sparco S.p.A. Sparco Ultra Carbon Racing Seat $1,849.00
Sparco ULTRA Carbon Racing Seat The Sparco Ultra Carbon seat is the lightest FIA 8859-1999 seat in the Sparco range at only 8.3lbs. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon which gives the optimal strength to weight ratio. The Ultra Carbon seat is revolutionary because it was designed to be used without a cover or padding to minimize weight and maximize performance. This allows for a lower seating position and also better feedback from the chassis of your race car. The Sparco Ultra Carbon fiber shell has both form and function. It has an extremely comfortable shape that is contoured for the body with the perfect amount of recline and lumbar support. The Sparco Ultra Carbon race seat was designed to fit into very narrow cockpits but still offer sizing that fits a standard to large size driver. The Sparco Ultra Carbon is FIA 8859-1999 approved. Sparco Ultra Carbon Fiber Race Seat  - Sizing Medium / Large (up to 36” waist) Sparco Ultra Carbon Fiber Race Seat  - Technology Ultralight light weight Pre-Preg Carbon Fiber shellExcellent fitment into small narrow vehicle cockpitsExcellent ergonomicsLower Seating positionFIA 8859-1999 approved Sparco Ultra Carbon Fiber Race Seat - Dimensions
Sparco-Evo-Carbon-Fiber-Race-Seat-008007ZNR-Profile-Image
Sparco S.p.A. Sparco EVO Carbon Fiber (STD, L, XL) Racing Seat $1,849.00
Sparco EVO Carbon Fiber Racing Seats As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with pre-preg aerospace grade carbon fiber, also known as dry carbon. The Sparco EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover). The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. EVO QRT TECHNOLOGY Ultralight pre-preg carbon fiber shell Excellent fitment into small vehicle cockpits Three shell sizes: Medium, Large, or XL Excellent ergonomics Fire-retardant fabric Special non-slip fabric FIA 8859-1999 approved SPARCO EVO RACE SEAT SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment: EVO Carbon – Medium (up to 34” waist) EVO L Carbon – Large (up to 36” waist) EVO XL Carbon– X-Large (38” waist) DIMENSIONS
Sold out
Sparco-legend-Kevlar-008021ZNR-Black-front-image
Sparco S.p.A. Sparco Legend Kevlar Racing Seat $1,749.00
Sparco Legend Kevlar Racing Seat Introducing the Sparco Legend Kevlar race seat – a timeless masterpiece inspired by the exhilarating world of 1980s rally racing. With an unmatched blend of heritage and innovation, this seat captures the essence of that golden era, providing rally enthusiasts with an authentic and immersive experience like no other. The Sparco Legend Kevlar race seat pays homage to the rugged spirit of 1980s rally racing, where drivers pushed the limits of their skills and machines across treacherous terrains and unforgiving conditions. Designed with meticulous attention to detail, this seat combines classic aesthetics with modern technology, delivering a fusion of vintage charm and contemporary performance. Sit in the Sparco Legend Kevlar race seat and be transported back in time to an era of iconic rally legends. Crafted from carbon/kevlar and other premium materials, this seat features a retro-inspired design that reflects the era's distinctive style. From the vintage-inspired stitching to the classic embroidered logos, every element has been carefully crafted to evoke nostalgia and celebrate the glory days of rally racing. But the Sparco Legend Kevlar race seat isn't just about looks – it's built to endure the demanding challenges of rally racing. With its reinforced kevlar structure and robust construction, this seat is engineered to withstand the rigors of auto racing. The specially designed padding offers optimal support and comfort, ensuring you stay focused and energized during those long and intense rally stages. In rally racing, safety is paramount, and the Sparco Legend Kevlar race seat excels in this aspect. Built to meet the highest safety standards, this seat provides superior protection in the event of a crash or sudden impact. The integrated headrest and side bolsters offer enhanced support and stability, keeping you securely in place, even during the most demanding maneuvers on unpredictable terrain. As you navigate through gravel, dirt, and mud, the Sparco Legend Kevlar race seat enhances your connection with the car and the road. Its ergonomic design promotes proper posture, allowing you to feel the subtle feedback and nuances of the vehicle's movements. With each twist and turn, the seat's firm yet comfortable grip ensures you maintain optimal control, empowering you to unleash your driving skills to their full potential. Whether you're recreating historic rally moments or embarking on new off-road adventures, the Sparco Legend Kevlar race seat is the perfect companion for your journey. Its universal fitment and compatibility with a wide range of rally cars from the 1980s ensure seamless integration and ease of installation, allowing you to relish the authentic rally experience in your cherished classic or modern rally machine. Embrace the spirit of 1980s rally racing with the Sparco Legend Kevlar race seat – where timeless design meets modern performance. Ignite your passion for rally, feel the adrenaline surge through your veins, and embark on an unforgettable adventure that honors the legacy of those iconic rally warriors. Sparco invites you to relive the glory days of rally racing and create your own legend behind the wheel. Sparco Legend Kevlar Race Seat Sizing Medium / Large (up to 36” waist) Sparco  Kevlar Race Seat Technology Ultra lightweight dry carbon/Kevlar shell Bottom mount only Excellent ergonomics FIA 8859-1999 approved
Sparco_qrt-k-carbon-kevlar-racing-Seat-Image
Sparco S.p.A. Sparco QRT-K Carbon Kevlar Racing Seat $1,749.00
Sparco QRT-K Carbon Kevlar Racing Seat The Sparco QRT-K Carbon Kevlar Racing Seat combines ultra-lightweight construction, advanced composite materials, and race-proven ergonomics to create one of the most impressive competition seats in the Sparco lineup. Constructed from aerospace-grade pre-preg Carbon Kevlar composite, the QRT-K delivers exceptional strength, rigidity, and weight savings while showcasing the distinctive exposed yellow-and-black Carbon Kevlar weave. Based on the proven QRT-R platform, the QRT-K was specifically engineered to accommodate larger drivers without sacrificing cockpit fitment. Its innovative shell design comfortably fits drivers up to approximately a 36-inch waist while maintaining compact exterior dimensions that allow installation in many sports cars and race vehicles where larger seats typically struggle to fit. Weighing just 13.5 lb (6.1 kg) fully trimmed with upholstery, padding, and harness guides, the QRT-K delivers premium motorsport performance with exceptional driver comfort and support. Advanced Carbon Kevlar Construction The QRT-K utilizes aerospace-grade pre-preg Carbon Kevlar composite construction to achieve an outstanding strength-to-weight ratio. Carbon fiber provides exceptional rigidity and weight reduction, while Kevlar contributes excellent impact resistance and durability. The result is a competition seat that delivers outstanding structural performance while showcasing the unmistakable appearance of exposed Carbon Kevlar weave. Designed for Larger Drivers Many lightweight racing seats sacrifice driver comfort in pursuit of reduced weight. The Sparco QRT-K takes a different approach by providing increased interior room for larger drivers while maintaining compact exterior dimensions for improved vehicle compatibility. This unique combination makes the QRT-K an excellent choice for drivers seeking a lightweight FIA-approved seat that doesn't compromise on fitment or comfort. What is Sparco QRT Technology? Developed at Sparco's OEM Composite Laboratory in Italy, QRT (Quick Resin Technology) is an advanced manufacturing process derived from aerospace engineering. QRT technology enables exceptional strength and reduced weight while maintaining the durability required for motorsport competition. The result is a racing seat that delivers outstanding performance and driver feedback while minimizing overall vehicle weight. Sparco QRT-K Carbon Kevlar Features Aerospace-grade pre-preg Carbon Kevlar composite shell Exposed Carbon Kevlar weave finish Fully trimmed weight of approximately 13.5 lb (6.1 kg) FIA 8855-1999 homologated racing seat Designed for larger drivers up to approximately a 36-inch waist Compact exterior dimensions for improved cockpit fitment Excellent ergonomics and long-session comfort Outstanding lateral support and driver containment Fire-retardant upholstery materials High-grip anti-slip fabric in key support areas Compatible with HANS devices and multi-point racing harnesses Ideal for road racing, endurance racing, time attack, and track-day applications Driver Fitment The Sparco QRT-K is designed to comfortably accommodate larger drivers and is generally suitable for drivers up to approximately a 36-inch waist. Its optimized shell geometry provides excellent support while maintaining compatibility with a wide range of sports car and race car interiors. Technical Specifications Homologation: FIA 8855-1999 Shell Material: Pre-Preg Carbon Kevlar Composite Weight: Approximately 13.5 lb (6.1 kg) fully trimmed Driver Fitment: Up to approximately 36-inch waist Mounting Type: Side Mount Required Side Mounts: Sparco QRT Side Mounts (Part Number 600QRT) Harness Compatibility: Multi-Point Racing Harnesses HANS Compatible: Yes Important Installation Information The Sparco QRT-K requires Sparco QRT Side Mount Brackets (Part Number 600QRT) for proper installation. These mounts are specifically engineered for the QRT shell and allow the seat to be positioned at the correct recline angle for optimal comfort and driver control. Why Choose the Sparco QRT-K? The QRT-K offers an exceptional blend of lightweight performance, advanced Carbon Kevlar construction, premium aesthetics, and FIA-approved safety. Its unique ability to fit larger drivers while maintaining compact external dimensions makes it one of the most versatile lightweight racing seats available. For drivers seeking the distinctive appearance of exposed Carbon Kevlar combined with professional-level performance and comfort, the Sparco QRT-K stands among the most desirable competition seats in the market. Sparco QRT-K Carbon Kevlar Dimensions
SPARCO-QRT-C-CARBON-FIBER-RACING-SEAT-DIMENSIONS-PROFILE-IMAGE
Sparco S.p.A. Sparco QRT-C Carbon Fiber Racing Seat $1,749.00
Sparco QRT-C Carbon Racing Seat The Sparco QRT-C Carbon Racing Seat is the ultimate expression of lightweight racing seat technology. Built around the proven QRT-R platform, the QRT-C utilizes aerospace-grade pre-preg carbon fiber construction to create one of the lightest large-format FIA-approved racing seats available. Designed specifically for larger drivers while maintaining compact exterior dimensions, the QRT-C delivers exceptional comfort, support, and safety without compromising cockpit fitment. Constructed using dry carbon fiber technology, the QRT-C weighs just 12.5 lb (5.7 kg) fully trimmed with upholstery and padding. Its advanced shell design accommodates drivers up to approximately a 36-inch waist while fitting into many vehicles where larger racing seats would normally be too wide. This unique balance of interior room and compact exterior dimensions makes the QRT-C a favorite among drivers building track-focused sports cars, endurance racers, and high-performance competition vehicles. With aggressive lateral support, race-proven ergonomics, and FIA homologation, the QRT-C delivers professional-level performance for serious racers seeking maximum weight savings and driver comfort. Ultra-Lightweight Dry Carbon Construction The QRT-C is manufactured using aerospace-grade pre-preg carbon fiber, often referred to as dry carbon. This advanced construction method produces an exceptionally strong and rigid shell while minimizing weight. The result is a competition seat that offers outstanding structural integrity, precise driver feedback, and reduced overall vehicle weight. For racers focused on every pound of weight reduction, the QRT-C represents one of the lightest FIA-approved large-driver racing seats available today. Designed for Larger Drivers Unlike many lightweight carbon fiber racing seats that prioritize compact dimensions at the expense of driver comfort, the QRT-C was engineered specifically for larger drivers. Its carefully optimized shell geometry provides increased interior room while maintaining compact external dimensions for improved installation flexibility. The QRT-C comfortably accommodates drivers up to approximately a 36-inch waist while fitting many sports car and race car cockpits where traditional large-format seats may not fit. Sparco QRT-C Features Aerospace-grade pre-preg carbon fiber shell construction Fully trimmed weight of approximately 12.5 lb (5.7 kg) FIA 8855-1999 homologated racing seat Designed for larger drivers up to approximately a 36-inch waist Compact exterior dimensions for improved vehicle fitment Outstanding lateral support and driver containment Excellent ergonomics for long racing sessions Fire-retardant upholstery materials High-grip anti-slip fabric in key support areas Compatible with HANS devices and multi-point harnesses Ideal for road racing, endurance racing, time attack, and track-day applications Technical Specifications Homologation: FIA 8855-1999 Shell Material: Pre-Preg Dry Carbon Fiber Weight: Approximately 12.5 lb (5.7 kg) fully trimmed Driver Fitment: Up to approximately 36-inch waist Mounting Type: Side Mount Required Side Mounts: Sparco QRT Side Mounts (Part Number 600QRT) Harness Compatibility: Multi-Point Racing Harnesses HANS Compatible: Yes Important Installation Information The Sparco QRT-C requires Sparco QRT Side Mount Brackets (Part Number 600QRT) for proper installation. These mounts are specifically designed to work with the QRT shell and allow the seat to be positioned at the proper recline angle for optimal comfort and driver control. Why Choose the Sparco QRT-C? The QRT-C delivers an exceptional combination of lightweight performance, premium carbon fiber construction, large-driver accommodation, and FIA-approved safety. Its unique ability to comfortably fit larger drivers while maintaining compact exterior dimensions sets it apart from many competing carbon racing seats. For drivers seeking maximum weight savings without sacrificing comfort, fitment, or safety, the Sparco QRT-C remains one of the most advanced carbon fiber racing seats available. Sparco QRT-C Carbon Racing Seat Dimensions