Sparco-Prime-Race-Suit-Black-Front-Image
Sparco Sparco Prime Driver Race Suit $2,200.00
Sparco Prime Race Suit The Sparco Prime race suit was developed for the McLaren Formula One team and is one of the lightest FIA 8856-2018 approved racing suits in the world. The Prime race suit has unparalleled technological features created in the Sparco R&D laboratories. The driver race suit project involved optimizing every single detail in terms of material and construction. This includes an ultra slim zipper, soft seamless Nomex/Vicosa wrists and ankle cuffs, the neck and shoulder pads were further reduced, thinner thread was used and stitching flattened. The Sparco Prime LT race suit features a three-layer construction of proprietary Sparco technology. The third, outer layer is a double faced mesh made from original DuPont Nomex Comfort fabric, woven using the Kompact system. The material contains a high percentage of antistatic fibers which provide extremely effective antistatic properties as well as breathability. The Prime race suit features pre-curved arms and legs as well as an inner thigh stretch panel for ultimate comfort. The Sparco Prime race suit is available in sizes EU48 to EU66. SPARCO PRIME DRIVER RACE SUIT DETAILS FIA 8856-2018 and SFI 3.2A/5 approved Exclusive DuPont Nomex Comfort fibers provide superior fire protection and comfort Pre-curved arms and legs Lightweight zipper and collar Inner-thigh stretch panel
Sparco Eagle LTD Driver Race Suit
Sparco Sparco Eagle LTD Driver Race Suit $1,699.00
Sparco Eagle LTD Driver Race Suit The Eagle LTD is newest evolution of the Eagle race suit. The new Eagle LTD race suit features an updated, softer HOCOTEX® material which is 30% thinner. The Eagle LTD features an all-new design with four new colorways. The Eagle LTD race suit carries the newest FIA homologation. Single-Layer Construction, Multi-Layer Performance The Eagle LTD is the latest iteration of the Eagle fabric and the result of over 3 years of R&D. Sparco has patented a new technology called HOCOTEX® which revolutionizes the way racing suits are made. This new exclusive Sparco technology creates a single layer fabric which has the protection of what is normally achieved by a multi-layer fabric. The Eagle LTD is FIA 8856-2018 homologated. Unprecedented Comfort Thanks to HOCOTEX®, the Eagle LTD is three times more breathable than a suit produced using traditional technology. The use of this relatively thinner fabric along with large side and back stretch panels and 360 degree arm gussets give the Eagle LTD ultimate flexibility and comfort. The Eagle LTD uses at new stretch material called Eagle fabric, which is lighter, more breathable, and more abrasion resistant than traditional stretch material. Improved Fire & Heat Resistance Traditional racing suits have layers of fabric sewn together in a quilted pattern. The quilting provides air space between the layers which bloats in a fire, this provides thermal protection to the driver. HOCOTEX® creates a honeycomb structure with internal air cells that ensure the driver even more fire protection. Traditional box quilting creates an average of 300 air chambers in a size 52 suit. The Eagle LTD has over 60,000 microcell air chambers which provide a 10 to 12% increase in heat protection performance. Sparco Eagle LTD Driver Race Suit Details: Single layer construction, multi-layer protection 3X more breathable than a standard suit with full 360o arm gussets Large stretch panels on sides and back with new breathable fabric Reinforced arms and legs with anti-abrasive material Three years of research and development HOCOTEX® patented Sparco Technology made in Italy Available in four colorways FIA 8856-2018 homologated
Sparco Superleggera Driver Race Suit
Sparco Sparco Superleggera Driver Race Suit $1,699.00
Sparco Superleggera Driver Race Suit The Sparco Superleggera is the lightest FIA 8856-2018 homologated race suit on the market today. Beyond the Superleggera being extraordinarily lightweight, it is also one of the most comfortable race suits available at any price. The Sparco Superleggera features a special four-way stretch panel that runs from each underarm down to the hip. These side stretch panels, combined with a rear stretch panel, give you the ultimate in mobility and freedom of movement, especially in the seated position. The Sparco Superleggera race suit also has a breathable inner thigh stretch panel, 360º floating arm gussets, and pre-curved arms and legs. It all adds up to unsurpassed comfort to go with the Superleggera's FIA and SFI approved safety. SPARCO SUPERLEGGERA DRIVER RACE SUIT DETAILS FIA 8856-2018 homologated SFI 3.2A/5 approved Lightest FIA suit on the market Pre-curved arms and legs Lightweight zipper and collar Inner-thigh mesh stretch panel Four-way mesh stretch panels on both sides and up the back SKU: 001142
Sparco Eagle 2.0 Race Suit Closeup Image
Sparco Sparco Eagle 2.0 Driver Race Suit $1,699.00
Sparco Eagle 2.0 Driver Race Suit The Eagle 2.0 is newest evolution of the Eagle race suit. The new Eagle 2.0 race suit features an updated, softer HOCOTEX® material which is 30% thinner. The Eagle 2.0 race suit features an all-new design with four new colorways. The Eagle 2.0 race suit carries the newest FIA homologation. SINGLE-LAYER CONSTRUCTION, MULTI-LAYER PERFORMANCE The Eagle 2.0 race suit is the result of over 3 years of research and development. Sparco has patented a new technology called HOCOTEX® which revolutionizes the way racing suits are made. This new exclusive Sparco technology creates a single layer fabric which has the protection of what is normally achieved by a multi-layer fabric. The Eagle 2.0 race suit is FIA 8856-2018 homologated. SPARCO EAGLE 2.0 RACE SUIT UNPRECEDENTED COMFORT Thanks to HOCOTEX®, the Eagle 2.0 race suit is three times more breathable than a suit produced using traditional technology. The use of this relatively thinner fabric along with large side and back stretch panels and 360 degree arm gussets give the Eagle 2.0 ultimate flexibility and comfort. The Eagle 2.0 race suit uses a new stretch material called Eagle fabric, which is lighter, more breathable, and more abrasion resistant than traditional stretch material. SPARCO EAGLE 2.0 RACE SUIT IMPROVED FIRE RESISTANCE Traditional racing suits have layers of fabric sewn together in a quilted pattern. The quilting provides air space between the layers which bloats in a fire, providing thermal protection to the driver. HOCOTEX® has a honeycomb structure with internal air cells that give the driver even better heat and fire protection. Traditional box quilting creates an average of 300 air chambers in a size 52 suit. The Sparco Eagle 2.0 race suit has over 60,000 microcell air chambers which provide a 10% to 12% increase in heat protection performance. SPARCO EAGLE 2.0 DRIVER RACE SUIT DETAILS FIA 8856-2018 homologated Single-layer construction with multi-layer heat- and fire-protection 3X more breathable than a standard suit with full 360o arm gussets Large stretch panels on sides and back with new breathable fabric Reinforced arms and legs with anti-abrasive material Three years of research and development HOCOTEX® patented Sparco Technology made in Italy Available in four colorways FIA 8856-2018 homologated SKU 001136H
Sold out
Sparco-X-light-FE-Infinity-BRS0007B0_Race-Suit-Primary-Sale-discount-offer-low-price-cheap-value-compare-image
Sparco Sparco X-Light FE Infinity Driver Race Suit $1,399.00
Sparco X-Light FE Infinity Driver Race Suit FULL EFFICIENCY TECHNOLOGY EXPANDED TO THE X-LIGHT INFINITY SUIT LINE The Sparco X-Light Full Efficiency Infinity Race Suit offers superior lightweight comfort with a focus on sustainability, crafted from regenerated materials to reduce waste while maintaining top-tier safety standards. Engineered with cutting-edge features like breathable inserts and ultra-flat seams, it ensures the ultimate in comfort, protection, and eco-responsibility. Here are the key features, benefits, and outcomes: Regenerated Material Construction: Utilizes recycled fabric from Sparco's production process, reducing waste and CO₂ emissions by 7kg per suit, benefiting the environment without sacrificing performance or safety. 2-Layer Lightweight Design: Incorporates Sparco’s latest lightweight materials, ensuring high-level protection while keeping weight at a minimum, allowing you to perform without added bulk. Breathable Inserts in Groin Area: Provides targeted airflow in high-heat zones, promoting cooling during intense driving sessions and enhancing comfort. Fully Floating Pre-Curved Sleeves: Uses advanced fabric construction for unrestricted arm movement, giving you optimal flexibility and reducing muscle strain during extended wear. Anti-Abrasion Elasticated Lower Back Panel: Ensures a snug fit without restriction in the seated position, minimizing friction and discomfort for a smoother driving experience. Ultra-Flat Internal Seams: Reduces pressure points, decreasing fatigue over long periods by minimizing internal friction against the skin. Seamless Cuffs and Ankles: Delivers a sleek, irritation-free finish around extremities, enhancing comfort and ease of movement. Hidden Pockets: Discreet storage options within the suit, providing secure space for small essentials without affecting the suit's fit or profile. Adjustable Velcro Belt: Allows you to fine-tune the fit for your body, ensuring stability and comfort throughout the race. Fully focused on delivering exceptional heat and flame protection, the Sparco X-Light Full Efficiency Race Suit keeps you both safe and comfortable during high-intensity drives. The breathable inserts channel airflow exactly where you need it, reducing heat buildup so you stay cool under pressure. Ultra-flat seams and seamless cuffs minimise potential pressure points, which means reduced fatigue even over prolonged sessions. With its precision-engineered design, every component works together to ensure freedom of movement, preventing restriction during those crucial moments on the track. Choose a suit that combines environmental responsibility with race-grade performance. Experience the Sparco X-Light Full Efficiency Race Suit and see the difference in comfort, protection, and eco-conscious engineering. The hallmark of the Sparco X-Light FE Infinity race suit is its innovative, advanced design with an extra focus on comfort and efficiency using 70% regenerated fibers and is LCA Certified. The Sparco X-Light race suit pushes the boundaries of Sparco’s revolutionary lightweight race suit design, using a lightweight Nomex outer layer along with an ultra-soft inner layer comprised of 90% regenerated fibers which provides superior fire protection with a comfortable feel. The Sparco X-Light features stretch panel technology derived from Sparco's Hocotex® Eagle suit. This specially-engineered stretch fabric is lighter and more durable than traditional elastic fabric. The Sparco X-Light race suit has pre-curved fully floating sleeves with stretch elbow panels, multi directional back stretch panels along with full side stretch panels that run from under the arm to the thighs. The X-Light race suit has another unique feature which is a breathable stretch panel that runs from inner thigh to inner thigh. The X-Light suit has the most stretch panels of any Sparco suit which gives ultimate comfort in the seated driving position. The X-Light FE is available in three colors in sizes from EU48-66. The X-Light FE race suit is FIA 8856-2018 approved. Sparco X-Light FE Driver Race Suit Details: Lightweight, comfortable fabric weighs a mere 270g/m2 Three-layer construction for maximum protection Pre-curved arms with elbow stretch panels Fully floating knit sleeves Multi-directional rear stretch panels create a fully-floating upper Full side mesh stretch panel Inner thigh mesh stretch panel FIA 8856-2018 homologated
-34% sale
Sparco Prime LT Driver Race Suit
00
DAYS
00
HRS
00
MIN
00
SEC
Sparco Sparco Prime LT Driver Race Suit $1,399.00 $2,100.00
Sparco Prime LT Race Suit (Limited Edition) The Sparco Prime LT race suit is a limited edition suit available only for the US market. The Prime LT design features two unique colorways. This limited edition suit was only made available for a single year in 2021. The Sparco Prime LT race suit is the same suit material developed for the McLaren F1 team and is one of the lightest FIA approved racing suit in the world. The Prime LT race suit has unparalleled technological features created in the Sparco R&D laboratories. This project involved optimizing every detail of the suit in terms of material and construction. Details such as an ultra slim zipper, soft & seamless Nomex/Vicosa wrist and ankle cuffs, neck and shoulder pads further reduced, thinner thread used and stitching flattened even more. The Sparco Prime LT race suit features a three-layer construction using proprietary Sparco technology. The third, outer layer is a double-faced mesh made from original DuPont Nomex Comfort, an innovative fabric that delivers both extreme protection and maximum comfort, woven using the Kompact® system. This material contains a high percentage of antistatic fibers, giving it extremely effective antistatic properties as well as exceptional breathability. The Sparco Prime LT race suit weighs from 240 to 270 grams per square meter (depending on size). SPARCO PRIME LT RACE SUIT TECHNOLOGY Lightest FIA approved suit in the world Exclusive DuPont Nomex Comfort fibers provide superior fire protection and comfort Pre-curved arms and legs Lightweight zipper and collar Breathable stretch panels FIA 8856-2000 approved SKU 001133U
Sparco-X-Light-FE-Race-Suit-Black_White-Main-Image
Sparco Sparco X-Light FE Driver Race Suit $1,299.00
Sparco X-Light FE Driver Race Suit FULL EFFICIENCY TECHNOLOGY EXPANDED TO THE X-LIGHT SUIT LINE The Sparco X-Light Full Efficiency Race Suit offers superior lightweight comfort with a focus on sustainability, crafted from regenerated materials to reduce waste while maintaining top-tier safety standards. Engineered with cutting-edge features like breathable inserts and ultra-flat seams, it ensures the ultimate in comfort, protection, and eco-responsibility. Here are the key features, benefits, and outcomes: Regenerated Material Construction: Utilizes recycled fabric from Sparco's production process, reducing waste and CO₂ emissions by 7kg per suit, benefiting the environment without sacrificing performance or safety. 2-Layer Lightweight Design: Incorporates Sparco’s latest lightweight materials, ensuring high-level protection while keeping weight at a minimum, allowing you to perform without added bulk. Breathable Inserts in Groin Area: Provides targeted airflow in high-heat zones, promoting cooling during intense driving sessions and enhancing comfort. Fully Floating Pre-Curved Sleeves: Uses advanced fabric construction for unrestricted arm movement, giving you optimal flexibility and reducing muscle strain during extended wear. Anti-Abrasion Elasticated Lower Back Panel: Ensures a snug fit without restriction in the seated position, minimizing friction and discomfort for a smoother driving experience. Ultra-Flat Internal Seams: Reduces pressure points, decreasing fatigue over long periods by minimizing internal friction against the skin. Seamless Cuffs and Ankles: Delivers a sleek, irritation-free finish around extremities, enhancing comfort and ease of movement. Hidden Pockets: Discreet storage options within the suit, providing secure space for small essentials without affecting the suit's fit or profile. Adjustable Velcro Belt: Allows you to fine-tune the fit for your body, ensuring stability and comfort throughout the race. Fully focused on delivering exceptional heat and flame protection, the Sparco X-Light Full Efficiency Race Suit keeps you both safe and comfortable during high-intensity drives. The breathable inserts channel airflow exactly where you need it, reducing heat buildup so you stay cool under pressure. Ultra-flat seams and seamless cuffs minimise potential pressure points, which means reduced fatigue even over prolonged sessions. With its precision-engineered design, every component works together to ensure freedom of movement, preventing restriction during those crucial moments on the track. Choose a suit that combines environmental responsibility with race-grade performance. Experience the Sparco X-Light Full Efficiency Race Suit and see the difference in comfort, protection, and eco-conscious engineering. The hallmark of the Sparco X-Light FE race suit is its innovative, advanced design with an extra focus on comfort and efficiency using 70% regenerated fibers and is LCA Certified. The Sparco X-Light race suit pushes the boundaries of Sparco’s revolutionary lightweight race suit design, using a lightweight Nomex outer layer along with an ultra-soft inner layer comprised of 90% regenerated fibers which provides superior fire protection with a comfortable feel. The Sparco X-Light features stretch panel technology derived from Sparco's Hocotex® Eagle suit. This specially-engineered stretch fabric is lighter and more durable than traditional elastic fabric. The Sparco X-Light race suit has pre-curved fully floating sleeves with stretch elbow panels, multi directional back stretch panels along with full side stretch panels that run from under the arm to the thighs. The X-Light race suit has another unique feature which is a breathable stretch panel that runs from inner thigh to inner thigh. The X-Light suit has the most stretch panels of any Sparco suit which gives ultimate comfort in the seated driving position. The X-Light FE is available in three colors in sizes from EU48-66. The X-Light FE race suit is FIA 8856-2018 approved. Sparco X-Light FE Driver Race Suit Details: Lightweight, comfortable fabric weighs a mere 270g/m2 Three-layer construction for maximum protection Pre-curved arms with elbow stretch panels Fully floating knit sleeves Multi-directional rear stretch panels create a fully-floating upper Full side mesh stretch panel Inner thigh mesh stretch panel FIA 8856-2018 homologated
-24% sale
Sparco Superleggera Driver Race Suit (Discontinued Colorways)
00
DAYS
00
HRS
00
MIN
00
SEC
Sparco Sparco Superleggera Driver Race Suit (Discontinued Colorways) $1,299.00 $1,699.00
Sparco Superleggera Race Suit (DISCONTINUED COLORWAYS) The Sparco Superleggera race suit is the lightest FIA 8856-2018 approved suit on the market. The Superleggera is not only lightweight, it's also one of the most comfortable race suits available at any price. It features a special four-way stretch panel that runs from each underarm down to the hip. These side stretch panels, combined with a generous rear stretch panel, give the driver the ultimate in flexibility and range-of-motion when in a seated position. The Sparco Superleggera fire resistant auto race suit also has a breathable inner-thigh stretch panel, 360º floating arm gussets, and pre-curved arms and legs. The Sparco Superleggera auto race suit is both FIA and SFI homologated. SPARCO SUPERLEGGERA RACE SUIT TECHNOLOGY FIA 8856-2018 homologated SFI 3.2A/5 approved Lightest FIA suit on the market Pre-curved arms and legs Lightweight zipper and collar Inner-thigh stretch panel Four-way stretch panels strategically placed throughout SKU 001142
Sold out
Sparco-Martini-Replica-Blue-Suit-Main-Image
Sparco Sparco Martini Racing Driver Suit (Blue) $1,200.00
Sparco Martini Racing Blue Driver Suit The Golden Age of Rally Racing Brought Back to Life! In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best racing drivers in the world. Now this partnership is renewed, and fans of the Martini Racing historical livery have access to beautiful re-creations of the original Sparco products. All of Sparco's Martini Racing reproductions have been updated with the newest Sparco safety technology and carry current FIA homologations. Classic Racing Heritage Meets Modern Technology The Sparco Martini Racing Replica Race Suit is made with all-new lightweight three-layer fabric. It offers superior fire protection, breathability, and comfort when compared to the original worn back in the day. The suit features iconic Martini Racing embroideries and patches to faithfully recreate the original look. The Martini Racing replica race suit is made from Sparco's latest generation fabrics, offering a soft, lightweight outer fabric and breathable inserts at the sides, plus a large lower-back stretch panel for maximum comfort. The Sparco Martini Racing Replica Race Suit also features a light-weight zipper and collar, pre-curved arms, pockets, classic tone-on-tone box quilt stitching and Sparco's signature epaulettes. Available in sizes EU48 - EU66. Sparco Martini Replica Race Suit Details: Martini Racing embroideries Lightweight three-layer fabric Pre-curved arms  Lightweight zipper and collar Breathable stretch panels FIA 8858-2018 approved
sparco-gulf-race-suit-001144GU_BI_front-Image
Sparco Sparco Gulf Racing Driver Suit $1,200.00
Sparco Gulf Racing Driver Suit The Golden Age of Endurance Racing Brought Back to Life! In the golden years of endurance racing, Sparco and Gulf Racing contributed to the triumphs of the best racing drivers in the world. Now this partnership is renewed, and fans of the Gulf Racing historical livery have access to beautiful re-creations of the original Sparco products. All of Sparco's Gulf Racing reproductions have been updated with the newest Sparco safety technology and carry current FIA homologations. Classic Racing Heritage Meets Modern Technology The Sparco Gulf Racing Replica Race Suit is made with all-new lightweight three-layer fabric. It offers superior fire protection, breathability, and comfort when compared to the original worn back in the day. The suit features iconic Gulf Racing embroideries and patches to faithfully recreate the original look. The Gulf Racing replica race suit is made from Sparco's latest generation fabrics, offering a soft, lightweight outer fabric and breathable inserts at the sides, plus a large lower-back stretch panel for maximum comfort. The Sparco Gulf Racing Replica Race Suit also features a light-weight zipper and collar, pre-curved arms, pockets, classic tone-on-tone box quilt stitching and Sparco's signature epaulettes. Available in sizes EU48 - EU66. Sparco Gulf Replica Race Suit Details: Gulf Racing embroideries Lightweight three-layer fabric Pre-curved arms  Lightweight zipper and collar Breathable stretch panels FIA 8856-2018 approved Suit only (shoes, helmet, gloves, balaclava, house and car not included)
Sold out
Sparco Martini Racing Replica Suit Closeup Image
Sparco Sparco Martini Racing Replica Suit (NEW) $1,200.00
Sparco Martini Race Suit In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best drivers in the world. Now this partnership is renewed, and fans of the Martini Racing historical livery have access to beautiful re-creations of the original Sparco products. All reproductions have been updated with the newest Sparco technologies and carry current FIA homologations. The Sparco Martini Racing replica race suit is made with all-new lightweight three-layer fabric. It offers superior fire protection, breathability and comfort when compared to the original. The suit features iconic Martini Racing embroideries and patches to faithfully recreate the original look. The Martini Racing replica suit is made from the latest generation fabrics which offer a soft lightweight outer fabric and breathable inserts at the sides and a large lower back stretch panel for maximum comfort. It also features a light-weight zipper and collar, pre-curved arms, pockets, classic tone-on-tone box quilt stitching and the Sparco signature epaulettes. Available in sizes EU48-66.  FIA 8856-2018 approved. SPARCO MARTINI REPLICA RACING SUIT TECHNOLOGY AND FEATURES Martini Racing embroideries Lightweight Three-layer Fabric Pre-curved arms Lightweight zipper and collar Breathable stretch panels FIA approved SPARCO MARTINI REPLICA RACING SUIT SIZE CHART
Sparco Victory 2023 Race Suit FIA 8856-2018 Black / White Front image
Sparco Sparco Victory Driver Race Suit FIA 8856-2018 $1,050.00
Sparco Victory Driver Race Suit FIA 8856-2018 The lightweight and breathable Sparco Victory 2023 racing suit is feature packed with lightweight HOCOTEX® fabric construction, comfort stretch panels, and is dual SFI 3.2A/5 and FIA 8856-2018 homologated. Built in Italy with pride, the new lightweight and breathable Sparco Victory race suit brings the performance of competitor's suits that are double the price to weekend racers. It's hard to improve on a classic, but Sparco has done just that with the updated Victory racing suit! Built from the popular Victory racing suit that brought HOCOTEX® technology to this price point. Largely keeping the popular Victory classic design with modern color options, the new Victory race suit takes things a step further with an improved cut, style, and fit. An improved stretch panel on the lower-back further improves mobility, while preformed sleeves maintain excellent steering performance. Sparco's unique HOCOTEX® technology makes use of an intricate honeycomb structure that contains thousands of protective microcapsules built into a super-thin and breathable fabric weave. Twice as breathable as other entry-level suits, these insulating compartments replace the multi-layer fabric construction found in every other suit on the market, all while maintaining dual SFI 3.2A/5 and FIA 8856-2018 certifications for zero compromises in protection! SPARCO VICTORY RACE SUIT DETAILS FIA 8856-2018 and SFI 3.2A/5 homologated Soft, lightweight, and twice as breathable as a standard multi-layer suit Single-layer comfort with multi-layer protection Hidden front pockets Fully-floating pre-formed sleeves with stretch panels Additional stretch gusset in the shoulders and armpits Three years of research and development HOCOTEX® patented Sparco technology Made in Italy The only single-layer SFI 3.2A/5 suit on the market
Two-piece Sparco x20 Drag Suit featuring a jacket and pants set, designed for flexibility and comfort during drag racing.
Sparco Sparco X-20 Drag Suit (DRAG RACING-SFI 20) from $1,049.00
X-20 Drag Racing Suit: Lightweight Protection for High-Speed Action! Ready to feel invincible on the drag strip? Enter the X-20 Drag Racing Suit—a blend of protection, comfort, and style that doesn’t mess around when it comes to keeping you safe at top speed. This isn’t your average suit; it’s a 7-layer fortress of protection made from our exclusive X-Light fabric. Whether you’re flooring it in a Top Fuel dragster or just trying to shave milliseconds off your ET in a door-slammer, the X-20 has you covered—literally. Features that Speak for Themselves (and Maybe Even Yell "GO!") SFI 3.2A/20 Approved – Translation: This suit is built to handle extreme heat and impact, meeting the highest safety standards in the sport. Exclusive X-Light Fabric – It’s like wearing a cloud that’s been beefed up for battle. You get breathability and flexibility without giving up protection. Fully Floating Sleeves – Mobility matters when you’re strapped in, so we’ve got you covered with sleeves that let you steer, shift, and fist pump when you crush that quarter-mile. Expandable Waist & Internal Knitted Cuffs – Because comfort matters. A stretchy waist and snug cuffs make sure this suit fits just right, so you can focus on hitting the throttle. One Piece or Two? – Choose between a single-piece overall or a two-piece jacket and pants set. Either way, you’re winning in style. Let’s Get Specific SFI Rating: 3.2A/20 Material: 7 layers of X-Light fabric Design: Box-quilt stitching for extra durability Options: Available as a one-piece suit or two-piece jacket and pants set Size Range: (Insert size details here) – Fits like a glove… that’s also fireproof. FAQs AnsweredQ: Is the X-20 suit fireproof?A: You bet! With its SFI 3.2A/20 rating, this suit can withstand intense heat, protecting you from the fire risks inherent in drag racing. Q: Can I wash my X-20 suit at home?A: Not quite. Due to the specialized materials and construction, you’ll want to have this suit professionally cleaned to maintain its protective properties. Q: How should the X-20 fit?A: Think snug, but not restrictive. The expandable waist and internal cuffs will help it conform to your body while allowing freedom of movement where you need it most—like your arms and legs. Q: Is this suit approved for professional drag racing?A: Absolutely! The X-20 meets SFI 3.2A/20 standards, so you’re race-ready whether you’re competing in sanctioned events or just breaking personal records. Call to ActionSo, are you ready to suit up and unleash your inner speed demon? The X-20 Drag Racing Suit is built for the bold, for the racers who want to feel light, move fast, and stay protected. Don’t just imagine yourself crossing the finish line—make it a reality. Get your X-20 Drag Racing Suit today and feel the difference between a race and a victory!
Two-piece Sparco x20 Drag Suit featuring a jacket and pants set, designed for flexibility and comfort during drag racing.
Sparco Sparco AIR-15 Drag Suit (DRAG RACING-SFI 15) from $999.00
Sparco AIR-15 Drag Suit: Lightweight Protection for Your Fastest Runs When it’s you against the quarter-mile, every millisecond counts—and the Sparco AIR-15 Drag Suit is here to help you shave off time while keeping you cool, comfortable, and, most importantly, protected. As the lightest and most breathable SFI 15-rated drag racing suit on the market, the AIR-15 gives you the edge to leave your competition in the dust. Maximum Protection Without the Bulk Let’s face it: drag racing is about speed, precision, and leaving your rivals in awe. The AIR-15 is made from Sparco’s exclusive X-light multi-layer fabric, offering a perfect balance between weight and protection. You’ll feel like you’re wearing a second skin instead of a suit, but with all the safety of an SFI-approved armor. It’s rated SFI 3.2A/15, which means you get top-tier fire resistance without the bulk. Because in drag racing, the only thing that should be heavy is your foot on the gas. Precision Fit for Precision Driving Whether you’re pulling G’s off the line or cruising back to the pits, the AIR-15 has been designed with drag racers in mind. The suit comes in both a one-piece overall and a two-piece jacket and pants set, so you can choose the fit that works best for your racing style. Plus, features like fully floating sleeves, internal knitted cuffs, and an expandable waist ensure maximum mobility. So, when you’re making those split-second shifts or lining up the perfect launch, you won’t feel held back by your gear. Bonus points? This suit includes SFI-approved sewn-on arm restraints, so you’ll stay safe and secure without sacrificing flexibility. Sparco AIR-15 Drag Suit Key Features X-Light Multi-Layer Fabric: Unmatched comfort and breathability while providing SFI 3.2A/15 fire protection. Available in One-Piece or Two-Piece Sets: Choose the style that best suits your needs—either a single overall (in black only) or a jacket and pants combo (with a black or grey jacket). Fully Floating Sleeves and Expandable Waist: Designed to move with you, not against you, for full control on the strip. SFI-Approved Arm Restraints: Stay locked in safely during your run. Internal Knitted Cuffs: Keep everything snug while preventing unwanted shifts or movement during high-speed runs. Pants only available in Black  Frequently Asked Questions (FAQ) 1. Is the AIR-15 suit legal for competitive drag racing?Absolutely! The AIR-15 meets the SFI 3.2A/15 standard, which is required for high-speed drag racing events. You’ll be protected and compliant at all your races. 2. What’s the difference between the one-piece and two-piece options?The one-piece is perfect for those who prefer seamless protection, while the two-piece gives you the flexibility to remove the jacket between runs. Both options offer the same high level of protection and comfort. Ready to Feel the Thrill? The Sparco AIR-15 Drag Suit is your ultimate companion for the drag strip. Offering unparalleled comfort, protection, and style, it’s designed for drag racers who take their craft seriously—and want to look good while doing it. Order now and get ready to launch your racing game into overdrive!
-38% sale
Sparco Eagle RS8.2 Auto Race Suit FIA 8856-2000 Closeup Image
00
DAYS
00
HRS
00
MIN
00
SEC
Sparco Sparco Eagle RS8.2 Auto Race Suit FIA 8856-2000 $999.00 $1,599.00
Sparco Eagle RS8.2 Driver Race Suit The Sparco Eagle RS-8.2 race suit uses a combination of HOCOTEX and Eagle fabrics to produce an ultra lightweight and breathable race suit. With the aim of obtaining a closer and more modern fit, preformed armholes have been used, and, in line with the requirements linked to driver mobility during a race, the elasticized panels have been optimized (armholes, sides and elasticized back). The main structure of the Sparco Eagle RS8.2 race suit, like in the previous version, is the tried and tested characteristic HOCOTEX, (single-layer weave of 0.6mm ultra-thin fabric), combined with other accessory fabrics like Sparco's Eagle elasticized fabric (well-known and used in various Sparco race suit models), and panels in contrast in flat, ultra-light cloth for anti-abrasion reinforcements on the legs and arms. Stitched quilting made with thin yarn, concealed pockets, a pre-formed neck, and belt with the characteristic Sparco logo round out the functional features of the Sparco Eagle RS8.2. SPARCO EAGLE RS 8.2 RACE SUIT DETAILS This suit weighs between 290 and 320 grams per square meter Pre-curved arms and legs prevent material bunching and pulling when in the driving position Strategic stretch panels throughout Available in sizes EU64 and EU66 only FIA 8856-2000 homologation
-53% sale
Sparco Prime Spec 1 Race Suit Black / Red Front Image
00
DAYS
00
HRS
00
MIN
00
SEC
Sparco Sparco Prime Spec 1 Driver Race Suit $999.00 $2,100.00
Sparco Prime Spec 1 Race Suit SAVE OVER $1,100 OFF THE ORIGINAL RETAIL PRICE! The Sparco Prime Spec 1 race suit is a USA-exclusive race suit that was designed to improve upon Sparco’s original top-of-the-line Prime SP-16 race suit. The first thing you'll notice is the new race suit's updated design. The Prime Spec 1 race suit adds two new multi-color options. In addition to the new design, the Sparco Prime Spec 1 race suit adds extra features like fully-floating sleeves, a waist belt, and internal pockets. THE LIGHTEST FIA-APPROVED SUIT ON THE MARKET The Sparco Prime Spec 1 race suit, made in collaboration with the McLaren Formula One team, is the lightest FIA-approved racing suit in the world. The Prime Spec 1 race suit boasts unparalleled technological features created in Sparco’s R&D laboratories. This project involved optimizing every detail in terms of materials and construction. This includes an ultra slim zipper, soft seamless Nomex/Vicosa® wrist and ankle cuffs, the neck and shoulder pads were further reduced, and thinner thread was used with flatter stitching throughout. The Sparco Prime Spec 1 race suit features three-layer construction using proprietary Sparco technology. The third outer layer is a double-faced mesh made from original DuPont Nomex Comfort® woven using the Kompact® system. This material contains a high percentage of antistatic fibers which provide extremely effective antistatic properties as well as breathability. The Sparco Prime Spec 1 race suit features pre-curved arms and legs as well as strategic stretch panels, giving the suit unbelievable comfort. The Sparco Prime Spec 1 race suit is available in two colorways. SPARCO PRIME SPEC 1 RACE SUIT TECHNOLOGY FIA 8856-2000 approved Lightest FIA approved suit in the world Exclusive DuPont Nomex® fibers provide superior fire protection and comfort Pre-curved arms and legs Strategic stretch panels Seamless arm and leg stitching