Best selling products

Allstar SFI 45.1 Hi-Density Bar Padding - 3' Black ChampCar legal SFI 45.1 roll bar padding providing maximum flame retardation and energy absorption. Constructed from hi-density fire resistant materials, you have the impact protection you need and the fire protection you hope you never need. Allstar SFI 45.1 Hi-Density Bar Padding - 3' Black Details: Manufacturer: Allstar Manufacturer part number: 14112 Required in NHRA, SCCA, NASCAR, Grand-Am, PWC, NASA, BMWCCA, ChampCar, PCA and more. Rating meets SFI spec 45.1 Provides maximum in energy absorption and flame retardation Will not drip or melt in fire Fits bars from 1-1/4" to 1-3/4" 36" length, pre-taped adhesive For perfect corners use a hack saw and a miter box #1 Seller in Roll Bar Padding Allstar SFI 45.1 roll bar padding won't melt or drip in a fire and is our #1 seller in roll-bar padding.

Racing Radios 4/C IMSA Style Helmet Kit with Coil Cord 4 Conductor IMSA Coil Cord Helmet Kit By Racing Radios is used mostly in sports car racing - IMSA, NASA, ChampCar, SCCA, and more. The coiled cable allows the driver to have some movement with the helmet. Comes with 3.5mm earpiece connection and top of the line noise canceling microphone. Racing Radios 4/C IMSA Helmet Kit with Coil Cord Details: Manufacturer: Racing Radios Manufacturer part number: HK4C-COIL Coil cord: IMSA Microphone: Mini noise cancelling Instillation kit included: Yes Instructions included: Yes

Bell Racing Helmets SE06 3mm Helmet Shield Bell SE06 helmet shields are specifically designed for the SA2020 Bell HP6 and GT6 helmets. These 3mm injection-molded optically correct polycarbonate face shield with Double Screen Anti-Fog (DSAF) insert for superior fog control. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.)

AiM Sports GPS09C Module The GPS09C module from AiM further expands the track mapping abilities of AiM data loggers and dash loggers. In addition, the GPS09C allows lap timing (even split times) without the use of trackside beacons, storing data for as many as 50 race tracks and up to five splits per track. The GPS09C can also calculate and log speed, lateral and longitudinal g-forces, and of course vehicle position. The AiM GPS09CC is the basis of lap time and split time calculations in all AiM systems. These systems come with start/finish line coordinates for more than four thousand race tracks, so your dash or logger automatically recognizes the track you are racing on and will calculate lap times and split times. If the track you're on is not in the database, your system will recognizes a new track and then will calculate lap times. High 25 Hz Sampling and Exceptional Accuracy The GPS09C is the latest version, boasting a quicker 25 Hz sampling rate (up from 10 Hz) and positional accuracy to less than one foot (down from over six feet). It also takes full advantage of Race Studio 3 integration of GPS, video, and data. Simple to install: Just connect the CAN cable to your dash and mount the AiM GPS09C antenna to your vehicle. The Standard Version is magnetic-backed and can be installed inside the cabin or on the vehicle exterior. The Roof Version is designed to run the cable through an exterior panel for a clean, secure, more permanent installation. The GPS09C will automatically configure itself during start-up! The AiM GPS09C connects via a 5-pin Binder 712 screw-in connector. Choose a cable length to suit your installation: 0.5m (1.6 ft), 1.3m (4.3 ft) is appropriate for most formula cars and motorcycles; 2.0m (6.6ft) and 4.0m (13.1 ft) are suitable for most sports cars and sedans. AiM GPS09C Module Compatibility MX Series: MXS, MXP, MXG, MXT SmartyCam Series1: Sport, Corsa, GP, Dual Loggers:1: Evo S, Evo 5 Lap Timer: Solo2 DL Power Distribution Modules: PDM32, PDM08 1 not compatible with Pro and Pro Open versions

CHILLOUT PRO SPORT Fire Resistant Shirt The CHILLOUT PRO SPORT underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track.  The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin temperature by up to eight degrees which will quicken your reflexes and reaction time on the track.  The Ultralight weight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track.  The Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body.  The Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint.  If you are serious about winning, then you need the Chillout Pro Sport underlayers in your gear bag.  FIA Homologation Standard: 8856-2018 SFI Homologation Specification: 3.3 Sizes: XS-XXL Colors: BLACK, CHARCOAL, WHITE Composition: 42% M-Aramide, 42% Viscose FR, 16% EA PERFORMANCE CHILLOUT PRO SPORT UNDERLAYER SHIRT SIZING AND USAGE CHILLOUT PRO SPORT UNDERWEAR All users shall ensure that the Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use. In order to obtain the maximum protection, all the clothing required in Apendix L (Chaper III, Article 2) to the FIA International Sporting Code should be used. Wearers are warned of the particular vulnerability of the neck, wrists, and ankles.  The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing. The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap.  The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist. MAINTENANCE CHILLOUT PRO SPORT UNDERWEAR Chillout PRO SPORT Flame Resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care.  Drivers should replace any and all items as soon as they show signs of wear.  Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time.  Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials. EMBROIDERY/LABELS CHILLOUT PRO SPORT UNDERLAYER SHIRT TOP Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer. CLEANING/MAINTENANCE CHILLOUT PRO SPORT UNDERLAYER SHIRT TOP The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments.  EEC CERTIFICATION/GUARANTEE CHILLOUT PRO SPORT SHIRT TOP Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.  

OMP PIT CREW SHOES SFI OMP Pit Crew Shoes: Where Comfort Meets Durability In the Pit Lane Ever felt like your feet were just another part of the car, absorbing every bump and vibration on the track? Well, kiss those days goodbye! The OMP Pit Crew Shoes are here to shift your foot comfort into high gear. Designed with the adrenaline junkie in mind, these shoes are the perfect co-pilot for over-the-wall crews, track workers, extreme off-road racers, and anyone who believes that life is too short to drive boring cars. OMP PIT CREW  FEATURES AND BENEFITS Built for the Long Haul: Crafted from the finest suede leather panels, these shoes aren't just a pretty face. They're tough, durable, and ready to handle the heat when the race is on. Safety First, But Make It Fashion: With inner protective material, these shoes don't just look good—they provide unmatched protection against the elements and the unexpected. Secure Your Victory: Laces and an ankle Velcro strap ensure your shoes stay on your feet, where they belong, no matter how intense the action gets. Comfort That Keeps on Giving: Internal padding, along with ankle and arch support, means your feet will feel as fresh at the finish line as they did at the starting line. Certified and Ready: SFI 3.3/5 homologated, because your safety is not a pit stop—it's the main event. Experience the Difference Imagine standing at the edge of the track, the roar of engines filling the air, the smell of burning rubber and victory in the nose. Your feet? They're as comfortable as they are in your favorite slippers, encased in the OMP Pit Crew Shoes. Whether you're sprinting to change a tire or navigating the rugged terrain of an off-road race, these shoes are your trusty sidekicks, ensuring every step is secure, protected, and oh-so-comfortable. OMP PIT CREW FAQs Q: Can these shoes really handle the heat of racing? A: Absolutely! Designed with the demands of racing in mind, they're built to withstand the heat, pressure, and intensity of the track. Q: Are they only for professional racers? A: Not at all! Whether you're a professional pit crew member, an amateur racer, or just someone who loves the racing lifestyle, these shoes are for you. Ready to Step Up Your Game? Don't let subpar footwear hold you back from crossing the finish line. With the OMP Pit Crew Shoes, you're not just buying a pair of shoes; you're investing in comfort, safety, and the sheer thrill of racing. So, why wait? Grab your pair today and feel the difference with every step, turn, and victory lap. Your feet (and your podium finish) will thank you.

Longacre 1 3/4" Steering Wheel Hook Longacre Steering wheel hooks keep your race wheel out of the way during service and in between heats. The Longacre 52-22576 Steering wheel hook fits perfectly on all 1.75" (1 3/4") roll bars and will last many years with its durable anodized finish. Longacre 1 3/4" Steering Wheel Hook Details: Manufacturer: Longacre Manufacturer Part Number: 52-22576 Material: CNC Machined Billet Aluminum Finished: Black anodized Mount Diameter: 1.75" Protect your steering wheel Bolts onto your roll bar - no welding Lightweight billet aluminum - black anodized

CARBOTECH BRAKE PADS Carbotech Race Pads For 2015+ Ford Mustang GT with the Performance Package (6 Piston Brembo Caliper). Available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds for the front axle. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT1792 Manufacturer previous part number; CTSTANG Hawk cross reference: HB805_615 Material thickness: .615" Material thickness: 16mm BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. [img-12148-left-large_default] Carbotech CT1792 Race Pads Mustang GT 6 Piston Front 2015+ Fitment: 2019 Ford Mustang GT Premium Brembo Package 2019 Ford Mustang GT Brembo Package 2019 Ford Mustang Bullitt 2018 Ford Mustang Police 2018 Ford Mustang Performance Brakes 2018 Ford Mustang GT Premium Brembo Package 2018 Ford Mustang GT Brembo Package 2017 Ford Mustang Manual Transmission Brembo Package 2017 Ford Mustang GT Premium Brembo Package 2017 Ford Mustang GT Brembo Package 2016 Ford Mustang GT Premium Brembo Package 2016 Ford Mustang GT Manual Transmission Brembo Package 2016 Ford Mustang GT Brembo Package 2015 Ford Mustang GT Premium Brembo Package 2015 Ford Mustang GT Brembo Package 2015 Ford Mustang GT 50 Years Limited Edition 2015 FORD Mustang Brembo Package 2015 FORD Mustang 50th Anniversary Edition

Carbotech Brake Pads Carbotech 2014-17 C7 Stingray & 2015-2017 Z06 Rear Brake Pad Set How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT1718 Material thickness of pad material and backing plate: .592" (15mm) FMSI Number: D1718 Hawk interchange: HB727 CARBOTECH BRAKE COMPOUNDS   Carbotech 1521 The Carbotech 1521 is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. The Carbotech 1718 is a popular pad used on many Corvette Models: 2014 CHEVROLET CORVETTE STING RAY WITH STANDARD JL9 BRAKE PACKAGE (2014) 2014 CHEVROLET CORVETTE STING RAY Z51 - J55 BRAKE PACKAGE - OE DESIGNED CO-CAST BRAKE ROTORS (2014) 2014 CHEVROLET CORVETTE STING RAY Z51 - J55 BRAKE PACKAGE - RE-DESIGNED FULL CAST BRAKE ROTORS FOR IMPROVED COOLING (2014) 2015 CHEVROLET CORVETTE STING RAY Z51 - J55 BRAKE PACKAGE - OE DESIGNED CO-CAST BRAKE ROTORS (2015) 2015 CHEVROLET CORVETTE STING RAY Z51 - J55 BRAKE PACKAGE - RE-DESIGNED FULL CAST BRAKE ROTORS FOR IMPROVED COOLING (2015) 2015 CHEVROLET CORVETTE HEAVY DUTY (2015) 2015 CHEVROLET CORVETTE NO SUBMODEL (2015) 2015 CHEVROLET CORVETTE Z06 (2015) 2016 CHEVROLET CORVETTE NO SUBMODEL (2016) 2016 CHEVROLET CORVETTE Z06 (2016) 2017 CHEVROLET CORVETTE NO SUBMODEL (2017) 2017 CHEVROLET CORVETTE Z06 (2017) [img-12147-left-large_default]

Carbotech Brake Pads Carbotech Brake Pads for 2014-2015 Corvette C7 Stingray and 2010-2014 Camaro SS 6.2L Front How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT1001 Thickness of pad material and backing plate: .585" (15mm) FMSI Compatibility: D1001, D1016, D1050 Hawk Part Number: HB453 The Carbotech 1001 is 15mm thick. If you need a thicker .630" (16mm) thick pad use the Carbotech CT1001A. Carbotech Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotech XP8 is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP20 The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24 XP24 is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech 913 Kelated Metallic A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. This is a popular Brembo Caliper that also fits: 2002 MITSUBISHI LANCER EVOLUTION (2002) 2003 MITSUBISHI LANCER EVOLUTION (2003) 2003 MITSUBISHI LANCER EVOLUTION ALL (2003) 2004 CADILLAC CTS CTS-V; BREMBO CALIPERS (2004) 2004 CADILLAC CTS V 89047725 (2004) 2004 MITSUBISHI LANCER EVOLUTION (2004) 2004 MITSUBISHI LANCER EVOLUTION ALL (2004) 2004 SUBARU IMPREZA WRX STI (2004) 2004 SUBARU IMPREZA WRX STI ALL (2004) 2004 VOLVO S60 R MODEL (2004) 2004 VOLVO V70 R MODEL; 330MM FRONT DISCS (2004) 2005 CADILLAC CTS CTS-V; BREMBO CALIPERS (2005) 2005 CADILLAC CTS V 89047725 (2005) 2005 CADILLAC STS HEAVY DUTY 89047725 (2005) 2005 FORD GT NO SUBMODEL (2005) 2005 FORD GT NO SUBMODEL ALL (2005) 2005 MITSUBISHI LANCER EVOLUTION (2005) 2005 MITSUBISHI LANCER EVOLUTION ALL (2005) 2005 MITSUBISHI LANCER EVOLUTION MR ALL (2005) 2005 MITSUBISHI LANCER EVOLUTION RS ALL (2005) 2005 SUBARU IMPREZA WRX STI (2005) 2005 SUBARU IMPREZA WRX STI ALL (2005) 2005 VOLVO S60 R MODEL (2005) 2005 VOLVO V70 R MODEL; 330MM FRONT DISCS (2005) 2006 CADILLAC CTS CTS-V; BREMBO CALIPERS (2006) 2006 CADILLAC CTS V 89047725 (2006) 2006 CADILLAC STS HEAVY DUTY 89047725 (2006) 2006 CADILLAC STS V HD BRAKES; J56 ALL (2006) 2006 CADILLAC STS V STS-V SUPERCHARGED; BREMBO BRAKES ALL (2006) 2006 FORD GT NO SUBMODEL (2006) 2006 FORD GT NO SUBMODEL ALL (2006) 2006 MITSUBISHI LANCER EVOLUTION (2006) 2006 MITSUBISHI LANCER EVOLUTION ALL (2006) 2006 MITSUBISHI LANCER EVOLUTION MR ALL (2006) 2006 MITSUBISHI LANCER EVOLUTION RS ALL (2006) 2006 MITSUBISHI LANCER EVOLUTION SE ALL (2006) 2006 SUBARU IMPREZA WRX STI (2006) 2006 SUBARU IMPREZA WRX STI ALL (2006) 2006 VOLVO S60 R MODEL (2006) 2006 VOLVO V70 R MODEL; 330MM FRONT DISCS (2006) 2007 CADILLAC CTS CTS-V; BREMBO CALIPERS (2007) 2007 CADILLAC CTS V 89047725 (2007) 2007 CADILLAC STS HEAVY DUTY 89047725 (2007) 2007 CADILLAC STS V HD BRAKES; J56 ALL (2007) 2007 CADILLAC STS V STS-V SUPERCHARGED; BREMBO BRAKES ALL (2007) 2007 FORD MUSTANG SHELBY GT500 (2007) 2007 FORD MUSTANG SHELBY GT500 5.4L (2007) 2007 FORD MUSTANG SHELBY GT500 7R3Z2001A (2007) 2007 SUBARU IMPREZA WRX STI (2007) 2007 SUBARU IMPREZA WRX STI ALL (2007) 2007 SUBARU IMPREZA WRZ STI LIMITED ALL (2007) 2007 VOLVO S60 R MODEL (2007) 2007 VOLVO V70 R MODEL; 330MM FRONT DISCS (2007) 2008 CADILLAC STS HEAVY DUTY 89047725 (2008) 2008 CADILLAC STS V HD BRAKES; J56 ALL (2008) 2008 CADILLAC STS V STS-V SUPERCHARGED; BREMBO BRAKES ALL (2008) 2008 FORD MUSTANG SHELBY GT500 (2008) 2008 FORD MUSTANG SHELBY GT500 5.4L (2008) 2008 FORD MUSTANG SHELBY GT500 7R3Z2001A (2008) 2008 FORD MUSTANG SHELBY GT500 ALL (2008) 2008 MITSUBISHI LANCER EVOLUTION; 2 PIECE FRONT ROTOR (2008) 2008 MITSUBISHI LANCER EVOLUTION; STANDARD FRONT ROTOR (2008) 2008 PONTIAC G8 GXP ALL (2008) 2008 SUBARU IMPREZA WRX STI (2008) 2008 SUBARU IMPREZA WRX STI ALL (2008) 2009 CADILLAC STS HEAVY DUTY 89047725 (2009) 2009 CADILLAC STS V STS-V SUPERCHARGED; 6 LUG ALL (2009) 2009 FORD MUSTANG SHELBY (2009) 2009 FORD MUSTANG SHELBY GT500 5.4L (2009) 2009 FORD MUSTANG SHELBY GT500 7R3Z2001A (2009) 2009 FORD MUSTANG SHELBY GT500 ALL (2009) 2009 MITSUBISHI LANCER EVOLUTION; 2 PIECE FRONT ROTOR (2009) 2009 MITSUBISHI LANCER EVOLUTION; STANDARD FRONT ROTOR (2009) 2009 PONTIAC G8 GXP WITH 355MM DIAMETER FRONT ROTORS (2009) 2009 PONTIAC G8 GXP 89047725 (2009) 2009 PONTIAC G8 GXP ALL (2009) 2009 SUBARU IMPREZA WRX STI (2009) 2009 SUBARU IMPREZA WRX STI ALL (2009) 2010 CADILLAC STS HEAVY DUTY 89047725 (2010) 2010 CADILLAC STS PLATINUM STS-V SUPERCHARGED; 6 LUG ALL (2010) 2010 FORD MUSTANG BASE OR GT WITH BREMBO FRONT CALIPERS (2010) 2010 FORD MUSTANG SHELBY (2010) 2010 FORD MUSTANG SHELBY GT500 7R3Z2001A (2010) 2010 FORD MUSTANG SHELBY GT500 ALL (2010) 2010 HYUNDAI GENESIS COUPE WITH BREMBO BRAKES (340MM (13.4") FRONT ROTOR) (2010) 2010 HYUNDAI GENESIS COUPE TRACK 581012MA10 (2010) 2010 HYUNDAI GENESIS COUPE TRACK W/BREMBO BRAKES ALL (2010) 2010 MITSUBISHI LANCER EVOLUTION; 2 PIECE FRONT ROTOR (2010) 2010 MITSUBISHI LANCER EVOLUTION; STANDARD FRONT ROTOR (2010) 2010 SUBARU IMPREZA WRX STI (2010) 2010 SUBARU IMPREZA WRX STI ALL (2010) 2011 CADILLAC STS HEAVY DUTY 89047725 (2011) 2011 CADILLAC STS PLATINUM STS-V SUPERCHARGED; 6 LUG ALL (2011) 2011 FORD MUSTANG BASE OR GT WITH BREMBO FRONT CALIPERS (2011) 2011 FORD MUSTANG SHELBY (2011) 2011 FORD MUSTANG 5.0L PERFORMANCE W/BREMBO BRAKES 5.0L (2011) 2011 FORD MUSTANG 5.0L PERFORMANCE, BREMBO PACKAGE 7R3Z2001A (2011) 2011 FORD MUSTANG SHELBY GT500 7R3Z2001A (2011) 2011 FORD MUSTANG SHELBY GT500 ALL (2011) 2011 HYUNDAI GENESIS COUPE WITH BREMBO BRAKES (340MM (13.4") FRONT ROTOR) (2011) 2011 HYUNDAI GENESIS COUPE TRACK 581012MA10 (2011) 2011 HYUNDAI GENESIS COUPE TRACK W/BREMBO BRAKES ALL (2011) 2011 MITSUBISHI LANCER EVOLUTION; 2 PIECE FRONT ROTOR (2011) 2011 MITSUBISHI LANCER EVOLUTION; STANDARD FRONT ROTOR (2011) 2011 SAAB 9-5 BREMBO FRONT CALIPER; 355MM FRONT ROTORS (2011) 2011 SUBARU IMPREZA WRX STI (2011) 2011 SUBARU IMPREZA WRX STI ALL (2011) 2012 BUICK REGAL BREMBO FRONT CALIPER; VENTED REAR ROTOR (2012) 2012 BUICK REGAL TURBO GS ALL (2012) 2012 FORD MUSTANG BASE, GT, OR BOSS 302 WITH BREMBO FRONT CALIPERS (2012) 2012 FORD MUSTANG SHELBY (2012) 2012 FORD MUSTANG 5.0L PERFORMANCE W/BREMBO BRAKES 5.0L (2012) 2012 FORD MUSTANG BOSS 302 5.0L (2012) 2012 FORD MUSTANG BOSS 302 7R3Z2001A (2012) 2012 FORD MUSTANG GT BREMBO 7R3Z2001A (2012) 2012 FORD MUSTANG GT BREMBO ALL (2012) 2012 FORD MUSTANG SHELBY GT500 ALL (2012) 2012 FORD MUSTANG SHELBY GT500, BREMBO PACKAGE 7R3Z2001A (2012) 2012 HYUNDAI GENESIS COUPE WITH BREMBO BRAKES (340MM (13.4") FRONT ROTOR) (2012) 2012 HYUNDAI GENESIS COUPE TRACK 581012MA10 (2012) 2012 HYUNDAI GENESIS COUPE TRACK W/BREMBO BRAKES ALL (2012) 2012 MITSUBISHI LANCER EVOLUTION GSR; STANDARD FRONT ROTOR (2012) 2012 MITSUBISHI LANCER EVOLUTION MR; 2 PIECE FRONT ROTOR (2012) 2012 SUBARU IMPREZA WRX STI (2012) 2012 SUBARU IMPREZA WRX STI ALL (2012) 2013 BUICK REGAL BREMBO FRONT CALIPER; VENTED REAR ROTOR (2013) 2013 BUICK REGAL TURBO GS ALL (2013) 2013 CADILLAC ATS J55 HD BRAKE PACKAGE (2013) 2013 CADILLAC ATS W/ BREMBO FRONT CALIPER ALL (2013) 2013 CADILLAC ATS BREMBO FRONT BRAKE 22866931 (2013) 2013 CADILLAC ATS NO SUBMODEL ALL (2013) 2013 CADILLAC ATS PERFORMANCE 22791925 (2013) 2013 CADILLAC XTS 22976409 (2013) 2013 CADILLAC XTS 5 LUG, HEAVY DUTY BRAKES (2013) 2013 CADILLAC XTS PERFORMANCE 22866931 (2013) 2013 FORD MUSTANG BASE, GT, OR BOSS 302 WITH BREMBO FRONT CALIPERS (2013) 2013 FORD MUSTANG BOSS 302 5.0L (2013) 2013 FORD MUSTANG BOSS 302 7R3Z2001A (2013) 2013 FORD MUSTANG GT PERFORMANCE BRAKES ALL (2013) 2013 FORD MUSTANG SHELBY GT500 W/BREMBO BRAKES ALL (2013) 2013 FORD MUSTANG SHELBY GT500, FRONT TO 04/30/2012 7R3Z2001A (2013) 2013 HYUNDAI GENESIS COUPE WITH BREMBO BRAKES (340MM (13.4") FRONT ROTOR) (2013) 2013 HYUNDAI GENESIS COUPE TRACK 581012MA10 (2013) 2013 HYUNDAI GENESIS COUPE TRACK W/BREMBO BRAKES ALL (2013) 2013 MITSUBISHI LANCER EVOLUTION GSR; STANDARD FRONT ROTOR (2013) 2013 MITSUBISHI LANCER EVOLUTION MR; 2 PIECE FRONT ROTOR (2013) 2013 SUBARU IMPREZA WRX STI (2013) 2013 SUBARU IMPREZA WRX STI ALL (2013) 2014 BUICK REGAL GS 13329562 (2014) 2014 CADILLAC ATS BREMBO FRONT BRAKE 23145627 (2014) 2014 CADILLAC ATS PERFORMANCE 22791925 (2014) 2014 CADILLAC CTS SEDAN 23145627 (2014) 2014 CADILLAC CTS VSPORT PERFORMANCE, FRONT OE TO 03/2014 23441307 FROM 03/2014 22976409 (2014) 2014 CADILLAC XTS J64 BRAKE 18" WHEELS 23145627 (2014) 2014 CHEVROLET CORVETTE 23145627 (2014) 2014 CHEVROLET CORVETTE STING RAY WITH STANDARD JL9 BRAKE PACKAGE (2014) 2014 FORD MUSTANG BASE, GT, OR BOSS 302 WITH BREMBO FRONT CALIPERS (2014) 2014 FORD MUSTANG GT BREMBO TRACK 7R3Z2001A (2014) 2014 FORD MUSTANG GT BREMBO TRACK ALL (2014) 2014 FORD MUSTANG GT BREMBO W/AUTO TRANS ALL (2014) 2014 FORD MUSTANG GT BREMBO W/MANUAL TRANS ALL (2014) 2014 FORD MUSTANG GT PERFORMANCE BRAKES ALL (2014) 2014 HYUNDAI GENESIS COUPE TRACK 581012MA10 (2014) 2014 MITSUBISHI LANCER EVOLUTION 4605A572 (2014) 2014 SRT VIPER BLACK CALIPER 68232820AA (2014) 2014 SUBARU IMPREZA WRX STI (2014) 2014 SUBARU IMPREZA WRX STI ALL (2014) 2015 BUICK REGAL GS 13329562 (2015) 2015 CADILLAC ATS BREMBO FRONT BRAKE 23145627 (2015) 2015 CADILLAC ATS PERFORMANCE 22791925 (2015) 2015 CADILLAC CTS 23441307 (2015) 2015 CADILLAC CTS SEDAN 23145627 (2015) 2015 CADILLAC ELR PERFORMANCE 23441307 (2015) 2015 CADILLAC XTS 23145627 (2015) 2015 CHEVROLET CAMARO 6.2 LITER 22907156 (2015) 2015 CHEVROLET CORVETTE 23145627 (2015) 2015 DODGE VIPER BLACK CALIPER 68232820AA (2015) 2015 HYUNDAI GENESIS COUPE TRACK 581012MA10 (2015) 2015 SUBARU WRX STI 26296FE100 (2015) 2015 TESLA S 105506600B (2015) 2017 Honda Civic Type R 2018 Honda Civic Type R 2019 Honda Civic Type R 2020 Honda Civic Type R 2021 Honda Civic Type R

Carbotech CT1124 FRS/BRZ/GT86 Rear Brake Pad Set Carbotech brake pads for Subaru BRZ, Scion FRS, or Toyota GT86 Rear. AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. This if the pad if all 2013 and 2014 BRZ, FRS or GT86 rear axles, but for the 2015 fit the vented rear disks (292mm) only If you have a 2013-2014 BRZ, FRS, GT86, this your rear pad. If you have a 2015 BRZ, FRS, GT86 with a vented rear rotor (292mm), this your rear pad. If you have a 2015 BRZ, FRS, GT86 with a solid rear rotor (277mm), then you use CTB-1114 How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT1124 Fits 2013-2014 all rear rotors: Yes Fits 2015 vented rear rotors: Yes Fits 2015 solid rear rotors: No, use CTB-1114 Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.

Garmin Catalyst Carrying Case This Garmin Catalyst carrying case is a perfect fit for the Garmin Catalyst Driving Performance Optimizer. Featuring an easy to use perimeter zipper, this black case surrounds your device with a rugged outer shell and interior foam lining with a final layer of pretection of smooth gray velvet. Garmin Catalyst Carrying Case Details: Manufacturer: Garmin Manufacturer Part Number: 010-11917-00 Perfectly sized for the Garmin Catalyst Color: Black interior padding: Yes, impact foam with smooth gay velvet lining Closure: Zipper The Garmin Catalyst carry cas not only protects the screen of your Garmin Catalyst, but the important rear electric connections from damage.

Extinguisher "E" Decal This race car Fire System/Extinguisher "E" decal is approved for use in NASA, SCCA, PCA, BMWCCA, ChampCar and IMSA. Fire System "E" Decal Details: Shape: circle Color: red "E" and outer circle over white background Size: 4" diameter

Stilo ST5 Thin 2mil Perimeter Seal Tearoff Pack qty 30 (3 Sleeves of 10) Protect Your Stilo ST5 Helmet Shield From Rocks, Dirt, and Debris with these 2 mil thick tearoffs. Measuring 2 mil thickness (the most popular thickness for dirt track racers), it is intended for road racing and/or dirt track use. The perimeter seal system used in these tearoffs provides a tighter fit against the visor, blocking out dirt, dust, and water from getting between the visor and tearoff stack. This package of 2 mil tear-offs are in 3 stacks of 10 per package (30 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo ST5 2mm Perimeter Seal Tearoff Pack Quantity 30 (3 Sleeves of 10) Details: Manufacturer: Stilo Manufacturer part numbers:10259CP Thickness each: 2 mil Gradient: Clear Fits All Stilo ST5 Helmets: Yes Fits All Stilo ST4F and Stilo ST4W Helmets: No 3 Stacks of 10 tear-offs glued together Note: This is the thinner of tearoffs (2 mil) for your Stilo ST5 series helmets. It is used primarily in Dirt Track Racing where you need more pulls in a race

SPA Dip Tube Assembly for MFM400, 75S & HPC225 SPA Replacement Dip Tube Assembly for MFM400, 75S and HPC225 Series Fire Systems SPA Dip Tube Assembly - MFM400/75S & HPC225 Details: Manufacturer: SPA Technique Manufacturer Part Number: 02-SP-124 Fits MFM400 bottle: Yes Fits HPC225 bottle: Yes

Carbotech Brake Pads How To Properly Bed In Carbotech Racing Brake Pads Carbotech AP Racing CP8350 D50 Fepth Brake Pads 20mm Details: Manufacturer: Carbotech Manufacturer part number: CTFRP3116 Fits: AP Racing CP8350 D50 Center Arc. 20mm Thickness Calipers Hawk Interchange: HB521.800 Carbotech Interchange: CTFRP3116 Circo Interchange: MB2660 Endless Interchange: RCP106 AP Racing CP8350 D50 Center Acr. 20mm thick Carbotech Brake Pads are available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. Carbotech Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech AP Racing CP8350 D50 Brake Pads 20mm Cross Refenence: Carbotech: CTFRP3116 Circo: MB2660 Endless: RCP106 Ferodo: FRP3116 [img-12152-left-large_default]