Best selling products

Please DO NOT pay for the bottle before shipping us your bottle. Print and fill out this FORM This is a complete Lifeline Zero FK Mechanical or Electrical Bottle Service. This service is used when a bottle has not been discharged, is 100% full of agent and the pressure gage reads full.We empty, clean, inspect, test, and re-fill with your Zero FK agent. Our trained team member will then service to the correct pressure with dry nitrogen and install a new LifeLine service decal with current date. This price is all-in and includes ground shipping back to you.LifeLine Novec Bottle Service Notes: Please DO NOT fire the system if it has not already been fired Bottles that are 10 years of age or older cannot be serviced Bottles that are 4 years past the label service date can no longer be charged Contact us PRIOR to sending your unit in order to get your order number As of September 2024, Zero FK has replaced Novec 1320. Novec bottles are still compatible.  Pay now or later? Later. Please do not pay for the bottle before shipping us your bottle. We will contact you after we receive and inspect your bottle. Lifeline Zero FK Fire Bottle Service & Recertification is required for Lifeline fire systems every two years, or whenever they have been triggered. We provide factory-trained recharging services to ensure the utmost safety in your car's Lifeline fire-suppression system.Basic service includes checking all parts for wear and age issues, flushing the bottle, refilling with your Novec agent, repressurizing, and relabeling. If the bottle has been discharged, it will be refilled with new agent. Discharged electrical bottles require a new frangible seal and firing head, included with service. Recharged systems cannot be shipped via expedited air shipping services - return via UPS Ground service is required. In Store / Same Day Service: Fire suppression systems can be dropped off and/or picked from our store in Dawsonville, GA, or any event our trackside support staff is attending. Same day service maybe available at the Dawsonville store for an additional $100 charge. Same day service maybe available during normal store hours. Please call ahead for service availability. Trackside vehicles are not equipped for fire suppression service.  Fill out the form here and submit with your bottle for service. Shipping your bottle to DiscoveryParts: Create an account at DiscoveryParts.com including your billing and shipping address (if different) If you need help with step 1, call Discovery Parts @ 706-344-1235 Ship your bottle, insured with tracking to: DiscoveryParts-Lifeline Recharge20 Duck Thurmond RoadUnit B-2Dawsonville, GA 30534

Bell M.8 SA2020 Racing Helmet  Wide Eyeport, Lightweight Composite Protection The Bell M.8 SA2020 Racing Helmet combines classic Bell motorsport styling with modern safety engineering, lightweight composite construction, and exceptional driver visibility. Developed as the next evolution of Bell's legendary M-Series helmet design, the M.8 is ideal for racers who want a larger eyeport, outstanding comfort, and versatile performance for a wide range of automotive racing applications. Featuring an oversized eye opening that is especially accommodating for drivers wearing eyeglasses, the Bell M.8 offers an expanded field of vision without sacrificing the protective advantages of a full-face racing helmet. With Snell SA2020 certification, a multi-density impact-absorbing liner, fire-resistant interior, adjustable ventilation, and integrated M6 head and neck restraint mounting points, the Bell M.8 delivers dependable performance for track days, road racing, autocross, and other motorsport applications where its certification is accepted. Bell M.8 SA2020 Racing Helmet Features Snell SA2020 certified: Designed to meet recognized automotive racing helmet safety requirements. Extra-large eyeport: Expansive field of vision, especially beneficial for drivers wearing eyeglasses. Lightweight composite shell: Manufactured using a high-pressure molding process for strength and durability. Multi-density impact liner: Advanced multi-piece construction designed to manage impact energy. Comfort-Plus FR interior: Black fire-resistant fabric designed for comfort, moisture management, and durability. SRV-8 face shield: 3mm clear shield using the Bell SRV-1 pivot system. Adjustable upper air intakes: Manual lever ventilation controls allow drivers to manage airflow. Direct-flow chin bar vents: Additional ventilation for improved driving comfort. Integrated communication channels: Accommodates compatible radio microphones and hydration systems. M6 threaded terminals: Designed for installation of compatible FHR and HANS anchor hardware. Synthetic rubber shield gasket: Helps prevent dirt, water, and unwanted airflow from entering around the closed shield. Extended size range: Available from XX-Small through 4X-Large. Available colors: Gloss White and Matte Black. Extra-Large Eyeport for Maximum Racing Visibility One of the defining features of the Bell M.8 racing helmet is its exceptionally large eyeport. Designed to offer greater visibility than many traditional full-face racing helmets, the wide opening helps drivers maintain awareness of their surroundings, mirrors, gauges, and changing track conditions. The expanded eye opening is particularly appealing to drivers who wear prescription glasses or sunglasses, providing additional clearance compared with helmets featuring narrower eye openings. The M.8 is an excellent option for drivers transitioning from street driving to track events who want a full-face helmet with a more open, comfortable field of vision. Lightweight Composite Shell Construction The Bell M.8 uses a lightweight composite shell manufactured using a high-pressure molding process designed to provide consistent structural strength and durability. This construction balances protection and comfort, helping reduce unnecessary helmet weight during extended racing sessions. Its traditional Bell shell design provides the familiar appearance of the M-Series while incorporating updated materials and motorsport safety technology. Advanced Multi-Density Impact Protection Inside the composite shell, the Bell M.8 features an advanced multi-piece, multi-density impact-absorbing liner engineered to manage energy across different impact conditions. The liner uses multiple densities of energy-absorbing material to help manage forces during both lower- and higher-velocity impacts. Working together with the composite outer shell, this impact management system contributes to the helmet's Snell SA2020 protective performance. Comfort-Plus FR Interior for Driver Comfort The Bell M.8 features a black Comfort-Plus FR interior designed to provide a comfortable and supportive fit while incorporating fire-resistant materials appropriate for automotive motorsports. The interior fabric promotes moisture management and durability, helping drivers remain comfortable during demanding driving conditions. Multi-density interior foam provides additional fit support, helping keep the helmet secure during acceleration, braking, and cornering. Adjustable Ventilation for Improved Airflow The Bell M.8 incorporates a versatile ventilation system designed for different track conditions and driver preferences. Direct-flow chin bar vents allow incoming air to enter the front of the helmet, while manual lever-controlled upper intake vents can be opened or closed to regulate airflow. This configuration gives drivers greater control over ventilation during hot-weather events and cooler racing conditions. The adjustable ventilation system helps make the M.8 a versatile choice for both open-wheel and enclosed-cockpit applications, subject to event safety requirements. Bell SRV-8 Clear Shield with SRV-1 Pivot System The Bell M.8 comes equipped with a 3mm SRV-8 clear face shield designed to complement the helmet's oversized eyeport. The SRV-8 shield provides optical clarity and uses Bell's SRV-1 pivot system for opening, closing, and shield replacement. A synthetic rubber gasket around the shield opening helps reduce the entry of dirt, water, and unwanted air when the shield is closed. Replacement shields are available in different tint configurations to suit changing light conditions and driver preferences. Shop Bell SRV-8 Replacement Helmet Shields for compatible options. HANS and FHR Compatibility with Integrated M6 Terminals The Bell M.8 SA2020 helmet includes integrated M6 threaded terminals designed for mounting compatible frontal head restraint anchor hardware. These mounting points allow drivers to install approved HANS or other compatible FHR anchor systems without drilling or modifying the helmet shell. HANS/FHR anchor posts are sold separately unless specifically included in the selected product package. Always use manufacturer-approved mounting hardware and follow the installation instructions provided with the restraint system. Integrated Communication and Hydration System Channels The Bell M.8 includes integrated channels in the facepiece designed to accommodate compatible communication and hydration accessories. Drivers can add radio microphone components or drinking tube systems for applications requiring crew communication or hydration during extended driving sessions. These channels help simplify accessory installation and reduce interference with the helmet's interior fit. Communication and hydration accessories are sold separately. Bell M.8 SA2020 Helmet Specifications Manufacturer: Bell Racing Helmets Model: M.8 / M8 Helmet Type: Full-face automotive racing helmet Certification: Snell SA2020 Shell Construction: Lightweight composite Shell Manufacturing: High-pressure molding process Impact Liner: Multi-piece, multi-density energy-absorbing construction Interior: Black Comfort-Plus FR fire-resistant fabric Shield: SRV-8 clear polycarbonate, 3mm Shield Pivot: Bell SRV-1 Eyeport: Extra-large, wide-view design Ventilation: Direct-flow chin bar vents and adjustable upper air intakes FHR/HANS Mounting: Integrated M6 threaded terminals Accessory Compatibility: Radio microphone and hydration system channels Shield Seal: Synthetic rubber gasket Colors: Gloss White and Matte Black Sizes: XXS, XS, S, M, L, XL, 2XL, 3XL, 4XL Bell M.8 Racing Helmet Available Colors The Bell M.8 SA2020 is available in two traditional motorsport finishes: Gloss White: Classic Bell racing helmet appearance with a bright, clean finish. Matte Black: Understated motorsport styling with a non-gloss exterior finish. Both options feature the same helmet construction, certification, and core performance features. Who Should Choose the Bell M.8 Helmet? The Bell M.8 is especially well suited for drivers who prioritize visibility, helmet comfort, and a versatile full-face design. Eyeglass Wearers: Large eyeport provides additional space and visibility. Track-Day Drivers: Comfortable construction for HPDE and performance driving. Road Racers: Full-face protection and HANS-compatible mounting points. Autocross Drivers: Wide field of vision and a comfortable interior. Endurance Racers: Compatible communication and hydration accessory channels. Driving Instructors: Broad visibility for monitoring track surroundings and students. The M.8 may also be suitable for other motorsport disciplines when the competition rules permit its certification and helmet configuration. Bell M.8 Helmet Fit and Measurement Guide Bell M.8 SA2020 Racing Helmet Frequently Asked Questions What certification does the Bell M.8 helmet have? The Bell M.8 is certified to the Snell SA2020 automotive racing helmet standard. Always confirm that SA2020 helmets remain eligible for your specific racing organization and event. Is the Bell M.8 a good helmet for drivers who wear glasses? Yes. One of the M.8's main advantages is its extra-large eyeport, which provides additional clearance and visibility for drivers who wear eyeglasses. Does the Bell M.8 come with a face shield? Yes. The helmet comes equipped with a 3mm clear Bell SRV-8 shield using the SRV-1 pivot system. Does the Bell M.8 have HANS mounting points? Yes. Integrated M6 threaded terminals allow installation of compatible HANS or other approved FHR anchor hardware. Are HANS anchor posts included? The helmet includes the threaded mounting terminals. Anchor posts are sold separately unless specifically included in the purchased package. Can I install a radio system in the Bell M.8? Yes. Integrated facepiece channels accommodate compatible radio microphone systems. Radio components are sold separately. Can I install a drinking tube in the Bell M.8? Yes. The helmet includes integrated channels designed to accommodate compatible hydration system components. Does the Bell M.8 have adjustable ventilation? Yes. The helmet features direct-flow chin bar ventilation and manually adjustable upper air intake vents. What colors are available? The Bell M.8 SA2020 is available in Gloss White and Matte Black. What sizes does the Bell M.8 come in? The M.8 offers Bell's extended size range from XX-Small through 4X-Large. Check the manufacturer's sizing information for the correct fit. Can I use the Bell M.8 SA2020 for track days? Yes, provided the track-day organizer accepts Snell SA2020 helmets. Confirm current helmet certification requirements before attending an event. Does the Bell M.8 have FIA 8859-2015 certification? The standard composite Bell M.8 described here is listed with Snell SA2020 certification. Do not confuse it with the Bell M.8 Carbon, which is a separate model with different certification specifications. What replacement shield fits the Bell M.8? The Bell SRV-8 shield is designed for the M.8 and uses the SRV-1 pivot system. Always verify the exact shield version when ordering. Why Buy the Bell M.8 SA2020 from Discovery Parts? Discovery Parts specializes in premium racing safety equipment for professional racers, amateur competitors, track-day enthusiasts, and performance driving instructors. The Bell M.8 SA2020 combines a lightweight composite shell, exceptional visibility, adjustable ventilation, fire-resistant interior materials, and compatibility with popular racing accessories. Its classic styling and practical features make it an excellent option for drivers looking for a versatile full-face racing helmet.

Chillout Systems Club Series Cooling Shirt   The goal with the Club Series cooling shirt is to provide drivers with most comfortable driver cooling shirt on the market, maintaining safety and comfort at an affordable price. Chillout nailed it! The Club Series is an entry level cooling shirt, but don't let that fool you. It's made from dual layers of soft stretch cotton concealing a strategically structured layer of thermal conductive cooling veins that target the most vital region of the body – the core.  They are designed to work with Chillout's incredible refrigerant-based Quantum Cooling system but work equally well with icewater-based systems like Paragon or F.A.S.T.  The Club Series shirt has cooling efficiency similar to other brands, but in a high-quality, custom designed shirt with the cooling veins hidden between two ultra thin layers of stretch fabric. The stretch fabric is crucial to holding the cooling veins close to the body where heat exchange takes place. With cooling veins constructed of a matte fire-resistant, self-extinguishing compound developed by the US military, this cooling shirt is rugged and durable, perfect for racing, HPDE, or test days..  Featuring dry-release hose connectors, spillage isn’t an issue because the fluid stops when disconnected. ADD CONNECTORS For maximum adaptability, Chillout shirts do not come with connectors. Choose the Chillout Dual Prong connector to connect to a Chillout Systems Quantum Cooler. You can purchase Coolshirt male connectors (sold separately) to hook up to your Coolshirt cooler.

Chillout Systems 4" Neoprene Air Duct The Chillout 4" Neoprene Air Duct Hose is extremely flexible, pliable and structurally strong thanks to a coated spring-steel wire support helix that prevents it from collapsing. The fiberglass fabric cover and fiberglass cord are both impregnated and coated with neoprene rubber. With a functional temperature range between -45º F to 330º F, this makes it ideal for most applications, most importantly bringing fresh/cool air to your Quantum Cooler. Also perfect for cockpit cooling and other low-pressure ducting applications where extreme heat can't be avoided. Under-hood applications such as connecting an air intake to an air box, or an air box to a throttle body are also great uses. FEATURES 4" ID (inside diameter) Heat resistant to 330º F Remains flexible down to -45º F

Keep Your Stilo ST5 Helmet Ventilated With The Stilo Top Air System Fresh air keeps you cool and keeps sweat from getting in your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This unique cooling system feeds air from your car's fresh air system to both the top of your head and to the front of your face, while at the same time helping keep the inside of your visor clear. This system integrates into the existing design of the ST5 helmet and does not require any drilling of the shell or modifications to the internal EPS foam. There are four small ventilation holes molded into the top of every ST5 & ST6 helmet. Stilo's Top Air system fits over the forward two holes and extends down the front of the helmet and just under the top of the visor. Air fed into the Top Air is directed both to the top of the head and down over the face. A small deflector just inside the visor area directs air towards the visor and away from the eyes. Old air flows out of the rear holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Top Air System can be fitted to all Stilo ST5 or ST6 model helmets.

AiM Solo2 & Solo2 DL AC Wall Charger The AiM X06A12VBM, is the wall charger in every new AiM Solo2 and Solo2 DL kit. This wall charger takes the US 120VAC wall outlet and adapts it to the required 12VDC you need to charge your AiM Solo2 or Solo2 DL the night before your event.  AiM Solo2 & Solo2 DL AC Wall Charger Details Manufacturer: AiM Manufacturer part number: X06A12VBM End 1: Male 712 5 Pin Screw-in End 2: US 120VAC Wall Adapter AiM Solo2 & Solo2 DL AC Wall Charger Uses Charge Solo2 from any US 120V wall outlet Charge Solo2 DL from a US 120V wall outlet

Alpinestars Tech-1 ZX v3 Nomex Racing Gloves The Alpinestars Tech-1 ZX v3 Nomex Racing Gloves are engineered for professional drivers who demand exceptional protection, precise steering-wheel feel, and lasting comfort. Developed with leading Formula 1 and endurance racing drivers, the latest Tech-1 ZX generation introduces an advanced dual-sided honeycomb construction designed to improve heat protection and breathability. The new honeycomb Nomex top layer delivers nearly a 20% improvement in heat transmission performance compared with the previous generation. This enhanced protection is achieved without sacrificing the close fit, flexibility, and control that have made the Tech-1 ZX one of Alpinestars’ premier racing gloves. Advanced Honeycomb Nomex Construction The Tech-1 ZX v3 uses a breathable, flame-resistant aramidic fiber main construction with a bonded aramidic lining. This two-layer honeycomb assembly helps regulate temperature while providing the protection required for high-level motorsport competition. The lightweight construction reduces bulk around the hands, allowing the driver to maintain a natural connection with the steering wheel and cockpit controls during long races and demanding track sessions. Alpinestars Tech-1 ZX v3 Glove Features Certified to the FIA 8856-2018 homologation standard Advanced dual-sided honeycomb aramidic fiber construction Bonded aramidic lining for improved comfort and temperature control Nearly 20% improved heat transmission performance External seams for reduced pressure points and enhanced comfort Pre-curved fingers and palm for a natural driving position Ergonomic 3D silicone grip technology on the palm and fingers Strategically positioned grip pattern for flexibility and control Outer grip zones for precise cockpit control Touchscreen-compatible thumb and index fingertip Improved Grip and Steering-Wheel Feel A newly developed 3D silicone print is applied across the palm and fingers to provide secure grip with less printed surface area. This reduced pattern helps preserve flexibility and steering-wheel feel while still delivering dependable control under demanding racing conditions. Additional grip zones are positioned along the outer areas of the glove to improve contact with switches, paddles, and other cockpit controls. Pre-Curved Fit and External Seams The pre-curved shape has been increased from the previous version to better match the natural position of the hands while holding the steering wheel. This helps reduce material bunching, improves fit, and minimizes hand fatigue during extended driving sessions. External seams remove bulky stitching from the inside of the fingers, reducing pressure points and improving overall comfort and sensitivity. Touchscreen Compatibility The thumb and index fingertip are touchscreen compatible, allowing drivers to operate phones, tablets, data systems, and other touch-sensitive devices without removing their gloves. Alpinestars Tech-1 ZX v3 Nomex Gloves Sizing Chart Alpinestars Tech-1 ZX v3 Nomex Racing Gloves FAQs Are the Alpinestars Tech-1 ZX v3 Gloves FIA approved?Yes. The Tech-1 ZX v3 Gloves are certified to the FIA 8856-2018 homologation standard for fire-resistant motorsport apparel. What is the benefit of the honeycomb Nomex construction?The dual-sided honeycomb aramidic construction improves breathability and heat protection while maintaining a lightweight and flexible feel. How much has heat protection improved?Alpinestars states that the new honeycomb top layer provides nearly a 20% improvement in heat transmission performance compared with the previous generation. Why do these gloves use external seams?External seams reduce pressure points inside the fingers and provide a smoother, more comfortable fit while driving. Are the Tech-1 ZX v3 Gloves touchscreen compatible?Yes. The thumb and index fingertip are designed to work with compatible touchscreen devices. Do the gloves have a pre-curved fit?Yes. The fingers and palm are pre-curved to follow the natural position of the hands on the steering wheel, reducing bunching and fatigue.

Alpinestars ZX EVO v2 Pants The Alpinestars ZX EVO v2 Underlayer Pants are premium fire-resistant racing underwear designed to meet modern FIA requirements while maximizing comfort under a driving suit. Built using advanced Lenzing FR® natural viscose fiber, these pants deliver excellent flame resistance, reduced heat transfer, and an ultra-soft feel against the skin. Developed to Formula 1 underwear specifications, the ZX EVO v2 pants are extremely lightweight, thin, and seamless—making them ideal for professional racing, endurance events, and high-level track use where comfort and compliance are critical. Protection & Certification FIA 8856-2018 certified: Approved for use in many professional and club racing series. Lenzing FR® flame-resistant material: Natural fiber engineered for fire and heat protection. Construction & Comfort Stretchable construction designed to meet latest homologation standards Lightweight, seamless tubular knit for reduced pressure points Ultra-thin profile for comfortable wear under race suits Key Features High Lenzing FR® fiber content for enhanced thermal performance Jacquard motif with Alpinestars knee logo detailing Designed for professional motorsport and high-performance driving Pair the Alpinestars ZX EVO v2 Pants with matching ZX EVO v2 underlayer tops and socks for a complete FIA 8856-2018 compliant fire-resistant underwear system.

Sparco Racing Tow Strap When the unexpected happens at the race track, your Sparco tow straps get you back in the game without skipping a beat. PERFORMANCE THAT MOVES YOU FORWARD Key Features: Precision Engineering: Designed with the racer’s mindset for maximum performance and safety. Lightweight Strength: Every gram saved matters when you’re chasing lap times and podiums. Built for Competition: Meets the standards serious racers demand on and off the track. Specifications: Length: 10 in. (254 mm) Mounting hole: 15 mm diameter High-performance materials Track-tested durability Optimized for professional motorsports SPARCO RACING TOW STRAP FAQs: Is this product designed for racing use?Yes, it meets all relevant racing standards for its category. Can it be used for street or track only?This product is specifically optimized for track and race environments. How does it compare to similar products?Designed for maximum performance, it offers superior durability and functionality over typical alternatives. WHY BUY FROM DISCOVERY PARTS? We live racing. That means offering only track-proven gear, expert advice, and fast shipping so you’re never left waiting in the paddock. Let’s get you dialed in for success.

Stilo Helmets ST5 GT 8860-2018 Carbon Fiber Racing Helmet FIA 8860 Certification valid thru 2032 for these ST5 GT 8860 Carbon Fiber Helmets The Stilo ST5 GT 8860-2018 Carbon Fiber Racing Helmet is one of Stilo's most iconic and versatile closed-face racing helmets. Crafted from a carbon fiber layup and certified to the demanding FIA 8860-2018 standard, the ST5 GT is designed for drivers competing across a wide range of professional and high-level motorsports. Building on the successful ST4 helmet platform, the ST5 GT introduces a larger eyeport, improved interior fit system, integrated accessory ports, and extensive compatibility with communications, hydration, and forced-air systems. Lightweight Carbon Fiber Construction The Stilo ST5 GT uses a lightweight carbon fiber shell designed to provide exceptional protection while reducing unnecessary weight on the driver's head and neck. Small shell weight: approximately 3.13 lbs Large shell weight: approximately 3.39 lbs Two dedicated shell sizes for improved fit and reduced weight Using separate small and large shell configurations allows Stilo to create a more proportional helmet rather than relying on excessive interior padding to accommodate different head sizes. FIA 8860-2018 Certified Protection The ST5 GT Carbon is FIA 8860-2018 certified, making it suitable for a wide variety of high-level motorsport applications where advanced FIA helmet certification is required. The FIA 8860 standard is designed for professional competition and represents one of the most demanding helmet standards used in motorsports. Integrated Side Accessory Ports One of the defining features of the Stilo ST5 GT is the integrated side-port system located on both sides of the helmet. These ports allow drivers to configure the helmet around their specific racing requirements while keeping accessories neatly integrated into the helmet. Compatible systems and accessories include: Integrated communication systems Forced-air systems Hydration and drink systems Combined communications, air, and hydration configurations Stilo designed these systems to integrate seamlessly with the ST5 platform, making the ST5 GT one of the most customizable racing helmets available. Larger Eyeport and 3mm Anti-Fog Visor Compared with the earlier ST4 helmet platform, the ST5 features a larger eyeport designed to open beyond the driver's normal line of sight for improved visibility inside the cockpit. The helmet comes standard with a 3mm clear visor featuring Stilo's anti-fog coating. A variety of additional visor options are also available separately, allowing drivers to configure the helmet for different lighting and racing conditions. Removable Interior Padding Stilo improved the ST5 interior with removable cheek pads and removable top padding, allowing drivers to fine-tune the fit of the helmet. The helmet also comes standard with removable earmuff cushions designed to isolate the ears and create a significantly quieter environment inside the helmet. This is particularly beneficial for drivers using integrated communications or competing in loud closed-cockpit race cars. Designed for Communications, Air and Hydration The ST5 GT is designed from the outset to accommodate multiple driver-support systems without requiring a collection of externally mounted components. The helmet can be configured for: Integrated electronics Driver communications Air supply Hydration systems Multiple systems used together This versatility makes the ST5 GT particularly well suited to GT racing, endurance racing, touring cars, and other closed-cockpit motorsports. Stilo ST5 GT 8860-2018 Carbon Helmet Features FIA 8860-2018 certified Carbon fiber shell construction Approximately 3.13 lbs in the small shell Approximately 3.39 lbs in the large shell Two separate shell sizes for improved fit and reduced weight Integrated side accessory ports Ready for integrated electronic communication systems Compatible with forced-air systems Compatible with hydration and drink systems Communications, air, and hydration systems can be combined Larger eyeport compared with the ST4 platform 3mm clear visor included Anti-fog visor coating Removable cheek pads Removable top padding Removable earmuff cushions for improved noise isolation HANS posts included Additional aero accessories available Top-air kits available separately Multiple visor options available separately Built for Professional Motorsport The Stilo ST5 GT Carbon combines advanced FIA protection with lightweight carbon construction and one of the most adaptable accessory systems available in a racing helmet. Its combination of integrated communications capability, forced-air compatibility, hydration support, improved visibility, customizable interior padding, and FIA 8860-2018 certification makes it an excellent choice for drivers who need a professional-level helmet that can be configured around their race car and competition environment. Stilo ST5 GT 8860-2018 Carbon Fiber Helmet Sizing Chart For the most accurate fit, measure around the largest part of your head approximately one inch above your eyebrows and around the widest point at the back of your head. Take the measurement several times and use the largest result when selecting your helmet size. View our Auto Racing Helmet Buyer's Guide for additional helmet sizing and fit information. Stilo ST5 GT 8860-2018 FAQs What certification does the Stilo ST5 GT Carbon have?The Stilo ST5 GT Carbon is FIA 8860-2018 certified. How much does the Stilo ST5 GT Carbon weigh?The small shell weighs approximately 3.13 lbs, while the large shell weighs approximately 3.39 lbs. Is the Stilo ST5 GT made from carbon fiber?Yes. The helmet is constructed using a carbon fiber layup designed to provide high-level protection while minimizing helmet weight. Does the Stilo ST5 GT include a visor?Yes. It comes standard with a 3mm clear visor featuring an anti-fog coating. Can communications be installed in the ST5 GT?Yes. The integrated side ports are designed to accommodate compatible Stilo electronic communication systems. Can the ST5 GT use a forced-air system?Yes. The helmet is designed to accept compatible air-supply systems and optional top-air kits. Can I use a hydration system with the ST5 GT?Yes. Compatible drink and hydration systems can be integrated into the helmet. Can communications, air, and hydration be used together?Yes. The ST5 GT is designed so integrated electronics, air supply, and hydration systems can be used individually or in combination. Are the interior pads removable?Yes. The cheek pads and top pads are removable, allowing drivers to better customize the helmet fit. Does the ST5 GT include HANS posts?Yes. HANS posts are included with the helmet.    

Sparco Tide Nomex Racing Gloves   The Sparco Tide Nomex Racing Gloves combine advanced grip technology, vibration absorption, and premium comfort for demanding auto-racing applications. Designed with an anatomically shaped palm, external seams, and Sparco-exclusive 3D HTX material, the Tide provides a secure connection with the steering wheel while helping reduce hand fatigue during long stints. Touch-S technology on the thumb and index finger allows drivers to operate compatible touchscreen data-acquisition systems, mobile devices, and lap-timing applications without removing their gloves. Sparco 3D HTX Palm Technology The palm and fingers feature Sparco's exclusive 3D HTX material. This advanced surface is designed to increase grip, absorb steering-wheel vibration, and improve dexterity without adding unnecessary bulk. The hollow, volcano-shaped HTX structures are strategically arranged to improve durability and maintain consistent contact with the steering wheel. This design helps the driver maintain control while using less gripping pressure, which can reduce fatigue during extended racing sessions. Anatomically Shaped Palm The Sparco Tide features an anatomically correct palm that follows the natural contours of the hand. This shape improves comfort and helps the glove remain properly positioned while gripping the steering wheel. The close, ergonomic construction also improves dexterity when operating paddle shifters, steering-wheel buttons, switches, and other cockpit controls. Touch-S Touchscreen-Compatible Fingertips Sparco Touch-S technology places patented fire-resistant, touchscreen-compatible material on the thumb and index finger. This allows drivers to operate compatible touchscreen electronics without removing their gloves. Touch-S is ideal for using data-acquisition displays, phone-based lap timers, and mobile applications between sessions while maintaining the protective construction of the glove. External Seams for Improved Comfort Externally stitched seams move bulky stitching away from the inside of the fingers. This creates a smoother interior surface and helps reduce pressure points when gripping the steering wheel. The external-seam design provides a more natural feel and improved steering feedback, especially during long races and extended track sessions. Padded Knuckle Protection A padded knuckle area provides additional comfort and protection when the hands are bent around the steering wheel. The padding helps protect the knuckles in tight cockpit environments while preserving the flexibility required for precise control. Elasticated Wrist for a Secure Fit An elasticated wrist helps hold the glove securely in place while maintaining comfort and flexibility. The streamlined wrist design allows for easy entry and removal while providing dependable overlap with the sleeve of a compatible racing suit. FIA and SFI-Approved Racing Protection The Sparco Tide Nomex Gloves are approved to FIA 8856-2018 and SFI 3.3/5 standards. These certifications make them suitable for many professional, club-level, endurance, road-racing, rally, and grassroots motorsport applications. Drivers should confirm the required certification with their racing organization or sanctioning body before competition. Sparco Tide Nomex Glove Technology and Features Premium fire-resistant auto-racing glove construction Anatomically shaped palm follows the natural contour of the hand Sparco-exclusive 3D HTX palm and finger material Enhanced steering-wheel grip and control HTX surface absorbs vibration and improves dexterity Hollow volcano-shaped HTX structures improve durability Touch-S touchscreen-compatible thumb and index finger Compatible with touchscreen data-acquisition systems and lap-timing apps External seams reduce interior pressure points Padded knuckle area provides added comfort and protection Elasticated wrist provides a secure fit Designed to help reduce hand fatigue during long driving sessions FIA 8856-2018 approved SFI 3.3/5 approved Available Colors Black/Red Black/Orange White/Black Red/Black Blue/White Ideal for Multiple Motorsport Applications The Sparco Tide is designed for drivers who need exceptional grip, reduced vibration, and long-session comfort. Its advanced palm technology and anatomical fit make it suitable for circuit racing, endurance competition, rally, time trials, autocross, driver instruction, and performance track driving. The vibration-absorbing HTX material is especially valuable during extended driving sessions, helping the driver remain comfortable and focused without sacrificing steering feedback. Why Choose Sparco Tide Racing Gloves? The Sparco Tide combines certified fire-resistant protection with advanced grip and touchscreen technology. Its 3D HTX palm provides dependable traction and vibration absorption, while the external seams and anatomical construction deliver a close, comfortable fit. For drivers seeking a premium racing glove with excellent control, reduced hand fatigue, and FIA and SFI approval, the Sparco Tide offers a strong balance of safety, comfort, and performance. Sparco Tide Nomex Glove Size Chart Frequently Asked Questions What is Sparco 3D HTX technology?3D HTX is a Sparco-exclusive palm and finger material designed to improve grip, absorb steering-wheel vibration, and increase dexterity. How does the HTX palm help reduce hand fatigue?The shock-absorbing surface reduces vibration and allows the driver to maintain control without applying excessive gripping pressure. Can the Sparco Tide Gloves operate touchscreen devices?Yes. Touch-S material on the thumb and index finger allows use with compatible touchscreen data-acquisition systems, phones, and lap-timing applications. Why are the seams stitched on the outside?External seams move bulky stitching away from the inside of the fingers, reducing pressure points and improving steering-wheel feel. Do these gloves have knuckle protection?Yes. A padded knuckle area provides added comfort and protection when the hands are bent around the steering wheel. What certifications do the Sparco Tide Gloves have?They are approved to FIA 8856-2018 and SFI 3.3/5 standards. Are the Sparco Tide Gloves suitable for endurance racing?Yes. Their vibration-absorbing palm, external seams, anatomical fit, and padded knuckles make them well suited for long driving sessions. How should Sparco Tide Racing Gloves fit?They should fit closely around the hands and fingers without restricting movement or creating uncomfortable pressure at the fingertips.

Sparco K-Pole Kart Racing Shoe Constructed with a robust synthetic leather upper and strategically placed perforated mesh panels, the Sparco K-Pole ensures exceptional airflow and all-day comfort. Its molded rubber sole offers superior pedal feel, while the padded ankle collar and reinforced heel structure provide critical support under heavy braking and cornering loads. The asymmetrical lace system enhances fit security and reduces pressure on high-flex zones of the foot. Engineered for both indoor karting and outdoor circuits, the K-Pole is built to handle the rigors of kart racing without compromise. The Sparco K-Pole karting shoe was specifically designed for durability while offering the highest levels of comfort and performance in the kart. Distinctly designed, the K-Pole features a breathable, perforated matte-printed upper with a two-tone contrasting design. For greater grip and pedal sensitivity, the K-Pole has an anatomic inner sole with a low back, allowing the heel to move freely while karting. An all-new ultralight outer sole is anti-slip, anti-static, and oil-resistant. SPARCO K-POLE KART RACING SHOE TECHNOLOGY Lightweight synthetic leather upper with mesh inserts for optimal airflow Molded high-grip sole engineered for maximum pedal sensitivity and control Padded ankle collar and reinforced heel for added support and stability Asymmetrical lacing system for ergonomic fit and reduced pressure points Ideal for indoor karting, outdoor racing, and high-performance kart use SIZE CHART SPARCO K-POLE KART RACING SHOE FAQ's What size range is available for the Sparco K-Pole?The K-Pole is typically available in European sizes from 36 to 48. We recommend using the Sparco sizing chart for the most accurate fit. Can the K-Pole be used for indoor karting?Yes, the Sparco K-Pole is a great option for indoor karting due to its lightweight construction, breathable materials, and excellent sole grip. Are karting shoes like the K-Pole fireproof?No. Karting shoes are not fireproof because kart racing regulations generally do not require fire resistance. Fireproof footwear is only necessary for FIA-sanctioned auto racing. Do kart racing shoes help improve performance?Yes. Kart racing shoes enhance pedal feel, reduce fatigue, and provide superior grip, giving drivers better control and responsiveness during racing. How should kart racing shoes fit?Kart racing shoes should fit snugly with no excess movement in the heel or toe. A tight fit ensures better control, comfort, and pedal sensitivity. Do kart shoes stretch over time?They may stretch slightly with use, but not significantly. It’s best to choose a snug, supportive fit from the start. Can I wash my Sparco K-Pole shoes?It’s recommended to clean them by hand using a damp cloth and mild soap. Do not submerge them in water or place them in a washing machine. What socks should I wear with kart shoes?Thin, moisture-wicking socks are ideal. They help reduce sweat, improve fit, and enhance comfort during long stints. How does the K-Pole compare to other Sparco models like the K-Run or K-Rapid?The K-Pole offers a more structured feel and robust design compared to the lighter K-Run, while providing similar breathability and performance to the K-Rapid, making it a versatile choice for competitive drivers.

Stand21 Featherlite Frontal Head Restraint (FHR) The Featherlite from Stand21 is a breakthrough technological achievement in the FHR family, offering the absolute highest level of safety while weighing an incredible 310g (10.9 oz.) excluding padding. The use of very high strength carbon fiber combined with a more ergonomic design of the legs makes this FHR the safest, lightest, most comfortable head-and-neck safety device created to date. A revolutionary new integrated strap passage allows a flat curvature along the rear of the Stand21 Featherlite, alleviating uncomfortable interference between your helmet, the FHR device, and your seat. The Stand21 Featherlite is hugely popular among professionals as well as the most demanding amateur drivers. Four Bold New Colors Set Featherlite Apart The Stand21 Featherlite FHR is now available with four fantastic new colored lacquer finishes over the carbon fiber. In addition to traditional gloss clear finish, there are new gloss and matte  red, blue, purple and green finishes! The only HNR to offer colors, this further sets the Stand21 Featherlite apart from the ordinary. Stand21 Featherlite Frontal Head Restraint Details FIA 8858-2010 and SFI 38.1 certified Weight: 310 grams (11 oz.) Unprecedented curvature beam alleviating discomfort between the helmet, FHR, and seat/headrest Revolutionary integral strap passage Available in Medium and Large Available for 20° incline angles Supplied with black padding, sliding tether, and protective bag New, more ergonomic leg design

Stilo ST6 GT Carbon Fiber SA2025 Racing Helmet The legendary Stilo carbon helmet‚ lighter, cooler, clearer For over 25 years Stilo has led racing-helmet innovation, and the ST6 line marks a bold new chapter. With input from top programs, engineers refined the front and top aerodynamics for high-speed stability. The carbon ST6 prioritizes airflow, visibility, and comfort while maintaining modern safety standards. From track-tested aero to a dual-lock visor system, every detail is designed to give racers a performance edge. The ST6 improves on the market-leading ST5 in key areas: 10% lighter than Stilo ST5 26% more airflow than Stilo ST5 11% more visibility Refined liner and cheek pads More shell sizes for optimized weight Reworked visor construction for durability and easy care Updated visor hardware for reliability Stilo ST6 GT Carbon Helmet Features Puro Tech: Stilo's carbon fiber manufacturing process minimizes extra coatings to reduce mass without compromising protection. New shell size options: now offered in three shell sizes to deliver the smallest, lightest shell appropriate for your head size. Increased airflow design: redesigned front intake and top vents route air through EPS channels to reduce sweat and moisture. Increased downward visibility: a wider eyeport improves belt fastening and cockpit awareness. Interior comfort: reshaped cheek pads stabilize fit and comfort at speed. Injection-molded visor: clear optics with a washable high-performance anti-fog treatment. Dual visor lock: compliant with FIA standards in both closed and vent positions. Updated visor hardware: smoother actuation and easier installation; available in anodized finishes. Stilo Helmets ST6 GT Carbon Fiber Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0800AF1X Homologation: FIA 8858-2015 (FHR posts) Certification: Snell SA2025 Compatible shields: Stilo ST6 helmet shields Noise-attenuating earmuffs included Other Versions of the Stilo ST6 Racing Helmet Stilo ST6 FN SA2025 Carbon Fiber Helmet Stilo ST6 FN 8859-ABP Helmet Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Zero 8860-2018 ABP Carbon Fiber Helmet Stilo ST6 GT Composite Helmet Stilo ST6 FN 8859-ABP Carbon Fiber Helmet Stilo ST6 GT 8860 Carbon Fiber Helmet Stilo ST6 FN 8860 Carbon Fiber Helmet Stilo ST6 FN 8860-ABP Carbon Fiber Helmet Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet Stilo ST6 GT Carbon Fiber Helmet Sizing Chart What's Changing in SA2025 Auto Racing Helmets? SA2025 helmets are here, and while the changes may not be groundbreaking, they represent an important evolution in motorsport safety. According to the Snell Memorial Foundation, the SA2025 standard is an evolutionary update from SA2020‚ not a complete overhaul. Unlike the M2025 motorcycle standard, which adds rotational impact testing, the SA2025 auto racing helmet standard does not include rotational force requirements. Key SA2025 Helmet Safety Enhancements: Increased Impact Protection: SA2025 helmets are required to handle slightly higher impact speeds and achieve lower maximum peak G-force thresholds across all head-form sizes. Global FIA Alignment: These updated requirements bring the SA2025 standard into alignment with the new FIA 8859-2024 helmet safety regulation, creating more consistency across international motorsports. In short: SA2025 helmets are designed to offer enhanced linear impact protection, making them the safest Snell-rated auto racing helmets to date. Whether you're a competitive racer or a weekend track day enthusiast, upgrading to an SA2025-certified helmet ensures compliance with future racing regulations and gives you peace of mind at speed. Stilo ST6 GT Carbon SA2025 Helmet FAQs Is this Snell SA2025 certified? Yes, this listing reflects SA2025 certification. What's the difference between GT and FN? GT includes earmuffs for noise reduction and comms; FN is open-ear for maximum awareness and airflow. Can I use ST5 shields on the ST6? No. The ST6 uses its own shield family; choose ST6-specific shields and hardware. How should I choose my size? Measure head circumference and consult the pad chart; if between sizes, many drivers prefer the tighter fit for stability. This helmet will ship with signature required for delivery.

Stilo Cheek Pads Replacement cheek pads for Stilo ST5 / ST5.1 helmets help you customize your helmet to provide the perfect fit!