All products
BMW Racing Brakes
Brake Lines
Brake Pads
Brake Rotors
Brembo Big Brake Upgrades
Camaro Racing Brakes
Corvette Racing Brakes
Ferrari Racing Brakes
Ford Racing Brakes
Honda / Acura Racing Brakes
Lamborghini Racing Brakes
McLaren Racing Brakes
Mercedes Racing Brakes
Mitsubishi Racing Brakes
NASA German Touring Series
NASA Spec Series (All)
Nissan Racing Brakes
Porsche Racing Brakes
Racing Brake Fluid
Cobalt
Cobalt Corvette C7 Z07 (Z07 Carbon Ceramic Brakes w- Iron Disc) Brake Pads (Front)
$575.00
Cobalt Corvette C7 Z07 (Z07 Carbon Ceramic Brakes w/ Iron Disc) Brake Pads (Front)
Carbotech Brakes
Carbotech CT1082 Brake Pads for 2005-2014 Ford Mustang S197
from $178.00
Carbotech CT1082 Brake Pads for 2005-2014 Ford Mustang S197
Carbotech Race and Track Pads Carbotech CT1082 Brake Pads for 2005-2014 Ford Mustang S197, and can be used in the NASA Spec Iron series. Available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds
How To Properly Bed In Carbotech Racing Brake Pads
Carbotech Brake Compounds
Carbotech 1521
The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800F (426C+). 1521 is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech 1521 is NOT recommended for ANY track use.
Carbotech AX6
The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50F to 1000F + (10C to 537C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6 for street driving as well, even though Carbotech doesn't recommend street driving with AX6 due to possible elevated levels of dust and noise. AX6 is NOT recommended as a race compound in most applications.
Carbotech XP8
A high torque brake compound with a wide operating temperature range of 200F-1250F+ (93C to 676C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech does NOT recommended XP8 as a daily driven street pad due to elevated levels of dust and noise. Carbotech XP8 is a great compound on the front & rear of most open wheel and sports racers.
Carbotech XP10
When Carbotech unleashed the XP10 to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10 has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10 still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech compounds so successful. Carbotech XP10 is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotech XP12
Another highly successful XP series compound with an excellent initial bite, torque and fade resistance over and above the XP10 compound. XP12 has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12 has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12 is more rotor aggressive than XP10, but compared to the competition the XP12 is still very rotor friendly. XP12 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech XP20
The latest iteration of the highly successful XP series of compounds. XP20 is a step up from the highly successful XP16 compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XP series line of compounds from Carbotech . XP20 has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotech XP20 maintains our tradition of having the outstanding release and modulation that has made all other Carbotech compounds so successful. Carbotech XP20 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech XP24
XP24 is the pinnacle compound of the extremely successful XP Series of compounds engineered by Carbotech . This compound is based on the same fundamentals that exist in all other Carbotech formulations. XP24 has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24 has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotech XP24 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotech RP2
The RP2 compound was engineered for endurance racing based on our highly successful XP Series formulations. RP2 has strong initial bite, a little less modulation than our XP12 , but still maintains the rotor friendliness of our XP series compounds. RP2 has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2 is as rotor friendly as our XP series compounds. Carbotech RP2 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech 913 Kelated Metallic
A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
Carbotech Brakes
Carbotech CT2212 Rear Brake Pads, 2019-2022 Veloster N, 2022+ Elantra N
from $238.00
Carbotech CT2212 Rear Brake Pads, 2019-2022 Veloster N, 2022+ Elantra N
Carbotech CT2212 Rear Brake Pads, 2019-2022 Veloster N, 2022+ Elantra N Front Pad Set pads in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds.
How To Properly Bed In Carbotech Racing Brake Pads
Manufacturer: Carbotech
Manufacturer Part Number: CT2212
Carbotech Brake Compounds
Carbotech 1521
The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800 F (426 C+). 1521 is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech 1521 is NOT recommended for ANY track use.
Carbotech AX6
The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6 for street driving as well, even though Carbotech doesn't recommend street driving with AX6 due to possible elevated levels of dust and noise. AX6 is NOT recommended as a race compound in most applications.
Carbotech XP8
A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech does NOT recommended XP8 as a daily driven street pad due to elevated levels of dust and noise. Carbotech XP8 is a great compound on the front & rear of most open wheel and sports racers.
Carbotech XP10
When Carbotech unleashed the XP10 to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10 has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10 still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech compounds so successful. Carbotech XP10 is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotech XP12
Another highly successful XP series compound with an excellent initial bite, torque and fade resistance over and above the XP10 compound. XP12 has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12 has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12 is more rotor aggressive than XP10 , but compared to the competition the XP12 is still very rotor friendly. XP12 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech XP20
The latest iteration of the highly successful XP series of compounds. XP20 is a step up from the highly successful XP16 compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20 is another major step in progression of the highly successful XP series line of compounds from Carbotech . XP20 has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotech XP20 maintains our tradition of having the outstanding release and modulation that has made all other Carbotech compounds so successful. Carbotech XP20 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech XP24
XP24 is the pinnacle compound of the extremely successful XP Series of compounds engineered by Carbotech . This compound is based on the same fundamentals that exist in all other Carbotech formulations. XP24 has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24 has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotech XP24 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotech RP2
The RP2 compound was engineered for endurance racing based on our highly successful XP Series formulations. RP2 has strong initial bite, a little less modulation than our XP12 , but still maintains the rotor friendliness of our XP series compounds. RP2 has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2 is as rotor friendly as our XP series compounds. Carbotech RP2 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech 913 Kelated Metallic
A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
Carbotech Brakes
Carbotech CT2211 Front Brake Pads, 2019-2022 Veloster N, 2022+ Elantra N
from $312.00
Carbotech CT2211 Front Brake Pads, 2019-2022 Veloster N, 2022+ Elantra N
Carbotech CT2211 Front Brake Pads, 2019-2022 Veloster N, 2022+ Elantra N Front Pad Set pads in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds.
How To Properly Bed In Carbotech Racing Brake Pads
Manufacturer: Carbotech
Manufacturer Part Number: CT2211
Carbotech Brake Compounds
Carbotech 1521
The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800 F (426 C+). 1521 is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech 1521 is NOT recommended for ANY track use.
Carbotech AX6
The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6 for street driving as well, even though Carbotech doesn't recommend street driving with AX6 due to possible elevated levels of dust and noise. AX6 is NOT recommended as a race compound in most applications.
Carbotech XP8
A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech does NOT recommended XP8 as a daily driven street pad due to elevated levels of dust and noise. Carbotech XP8 is a great compound on the front & rear of most open wheel and sports racers.
Carbotech XP10
When Carbotech unleashed the XP10 to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10 has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10 still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech compounds so successful. Carbotech XP10 is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotech XP12
Another highly successful XP series compound with an excellent initial bite, torque and fade resistance over and above the XP10 compound. XP12 has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12 has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12 is more rotor aggressive than XP10 , but compared to the competition the XP12 is still very rotor friendly. XP12 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech XP20
The latest iteration of the highly successful XP series of compounds. XP20 is a step up from the highly successful XP16 compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20 is another major step in progression of the highly successful XP series line of compounds from Carbotech . XP20 has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotech XP20 maintains our tradition of having the outstanding release and modulation that has made all other Carbotech compounds so successful. Carbotech XP20 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech XP24
XP24 is the pinnacle compound of the extremely successful XP Series of compounds engineered by Carbotech . This compound is based on the same fundamentals that exist in all other Carbotech formulations. XP24 has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24 has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotech XP24 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotech RP2
The RP2 compound was engineered for endurance racing based on our highly successful XP Series formulations. RP2 has strong initial bite, a little less modulation than our XP12 , but still maintains the rotor friendliness of our XP series compounds. RP2 has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2 is as rotor friendly as our XP series compounds. Carbotech RP2 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech 913 Kelated Metallic
A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
Carbotech Brakes
Carbotech CT905 Rear Brake Pads, 2002-2019 350Z & 370Z (Non-Brembo), 2002-2008 G35
from $150.00
Carbotech CT905 Rear Brake Pads, 2002-2019 350Z & 370Z (Non-Brembo), 2002-2008 G35
Carbotech CT905 Rear Brake Pads, 2002-2019 350Z & 370Z (Non-Brembo), 2002-2008 G35 Rear Pad Set pads in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds.
How To Properly Bed In Carbotech Racing Brake Pads
Manufacturer: Carbotech
Manufacturer Part Number: CT905
Carbotech Brake Compounds
Carbotech 1521
The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800 F (426 C+). 1521 is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech 1521 is NOT recommended for ANY track use.
Carbotech AX6
The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6 for street driving as well, even though Carbotech doesn't recommend street driving with AX6 due to possible elevated levels of dust and noise. AX6 is NOT recommended as a race compound in most applications.
Carbotech XP8
A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech does NOT recommended XP8 as a daily driven street pad due to elevated levels of dust and noise. Carbotech XP8 is a great compound on the front & rear of most open wheel and sports racers.
Carbotech XP10
When Carbotech unleashed the XP10 to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10 has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10 still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech compounds so successful. Carbotech XP10 is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotech XP12
Another highly successful XP series compound with an excellent initial bite, torque and fade resistance over and above the XP10 compound. XP12 has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12 has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12 is more rotor aggressive than XP10 , but compared to the competition the XP12 is still very rotor friendly. XP12 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech XP20
The latest iteration of the highly successful XP series of compounds. XP20 is a step up from the highly successful XP16 compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20 is another major step in progression of the highly successful XP series line of compounds from Carbotech . XP20 has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotech XP20 maintains our tradition of having the outstanding release and modulation that has made all other Carbotech compounds so successful. Carbotech XP20 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech XP24
XP24 is the pinnacle compound of the extremely successful XP Series of compounds engineered by Carbotech . This compound is based on the same fundamentals that exist in all other Carbotech formulations. XP24 has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24 has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotech XP24 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotech RP2
The RP2 compound was engineered for endurance racing based on our highly successful XP Series formulations. RP2 has strong initial bite, a little less modulation than our XP12 , but still maintains the rotor friendliness of our XP series compounds. RP2 has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2 is as rotor friendly as our XP series compounds. Carbotech RP2 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech 913 Kelated Metallic
A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
Carbotech Brakes
GiroDisc Magic Street Brake Pads Mustang Rear 2005-2014
$95.00
GiroDisc Magic Street Brake
Girodisc's "Magic Pads" offer a solution to common issues with factory brake pads such as squeaking, excessive dust, and high costs. These pads produce less dust compared to typical factory and performance pads, reducing the need for frequent wheel cleaning. Moreover, they provide excellent initial bite, a feature often lacking in more affordable pads. However, what truly sets our pads apart is their ability to effectively address brake noise problems, earning them the reputation of being a "silver bullet" solution. Crafted from a semi-metallic composition, Magic Pads are gentle on both rotors and your budget. When transitioning between different pad compounds, we recommend replacing all pads in the car simultaneously. Each set of Magic Pads includes pre-installed anti-noise shields at no extra cost. Should you have any inquiries, feel free to reach out to us – we're here to assist you!
GiroDisc Magic Brake Pad Fitment:
2005 FORD MUSTANG V6 - 4.0L (2005, 2005)
2005 FORD MUSTANG V8 4.6L (2005, 2005)
2005 FORD MUSTANG V6 (2005, 2005)
2006 FORD MUSTANG V6 - 4.0L (2006, 2006)
2006 FORD MUSTANG V8 4.6L (2006, 2006)
2006 FORD MUSTANG V6 (2006, 2006)
2007 FORD MUSTANG SHELBY GT (2007, 2007)
2007 FORD MUSTANG SHELBY GT500 (2007, 2007)
2007 FORD MUSTANG V6 - 4.0L (2007, 2007)
2007 FORD MUSTANG V8 4.6L (2007, 2007)
2007 FORD MUSTANG SHELBY GT500 5.4L (2007, 2007)
2007 FORD MUSTANG V6 (2007, 2007)
2008 FORD MUSTANG SHELBY GT (2008, 2008)
2008 FORD MUSTANG SHELBY GT500 (2008, 2008)
2008 FORD MUSTANG V6 (2008, 2008)
2008 FORD MUSTANG V8; GT (2008, 2008)
2008 FORD MUSTANG SHELBY GT500 5.4L (2008, 2008)
2008 FORD MUSTANG SHELBY GT500 ALL (2008, 2008)
2008 FORD MUSTANG V6 (2008, 2008)
2009 FORD MUSTANG SHELBY (2009, 2009)
2009 FORD MUSTANG V6 (2009, 2009)
2009 FORD MUSTANG V8; GT (2009, 2009)
2009 FORD MUSTANG SHELBY GT500 5.4L (2009, 2009)
2009 FORD MUSTANG SHELBY GT500 ALL (2009, 2009)
2009 FORD MUSTANG V6 (2009, 2009)
2010 FORD MUSTANG BASE OR GT WITH BREMBO FRONT CALIPERS (2010, 2010)
2010 FORD MUSTANG SHELBY (2010, 2010)
2010 FORD MUSTANG V6 MFG AFTER 3/21/2010 - EXCEPT MODELS WITH BREMBO FRONT CALIPERS (2010, 2010)
2010 FORD MUSTANG V6 MFG UP TO 3/20/2010 (2010, 2010)
2010 FORD MUSTANG V8; GT MFG AFTER 3/21/2010 - EXCEPT MODELS WITH BREMBO FRONT CALIPERS (2010, 2010)
2010 FORD MUSTANG V8; GT MFG UP TO 3/20/2010 (2010, 2010)
2010 FORD MUSTANG SHELBY GT500 ALL (2010, 2010)
2010 FORD MUSTANG V6 (2010, 2010)
2011 FORD MUSTANG BASE OR GT WITH BREMBO FRONT CALIPERS (2011, 2011)
2011 FORD MUSTANG SHELBY (2011, 2011)
2011 FORD MUSTANG V6 MODELS WITHOUT BREMBO FRONT CALIPERS (2011, 2011)
2011 FORD MUSTANG V8; GT MODELS WITHOUT BREMBO FRONT CALIPERS (2011, 2011)
2011 FORD MUSTANG 5.0L PERFORMANCE W/BREMBO BRAKES 5.0L (2011, 2011)
2011 FORD MUSTANG SHELBY GT500 ALL (2011, 2011)
2011 FORD MUSTANG V6 FRONT ROTOR FITS MODELS W/O PERFORMANCE BRAKE PKG 3.7L (2011, 2011)
2012 FORD MUSTANG BASE, GT, OR BOSS 302 WITH BREMBO FRONT CALIPERS (2012, 2012)
2012 FORD MUSTANG V6 MODELS WITHOUT BREMBO FRONT CALIPERS (2012, 2012)
2012 FORD MUSTANG V8; GT MODELS WITHOUT BREMBO FRONT CALIPERS (2012, 2012)
2012 FORD MUSTANG 5.0L PERFORMANCE W/BREMBO BRAKES 5.0L (2012, 2012)
2012 FORD MUSTANG BOSS 302 5.0L (2012, 2012)
2012 FORD MUSTANG GT BREMBO ALL (2012, 2012)
2012 FORD MUSTANG GT STANDARD BRAKES 5.0L (2012, 2012)
2012 FORD MUSTANG V6 FRONT ROTOR FITS MODELS W/O PERFORMANCE BRAKE PKG 3.7L (2012, 2012)
2013 FORD MUSTANG BASE, GT, OR BOSS 302 WITH BREMBO FRONT CALIPERS (2013, 2013)
2013 FORD MUSTANG MODELS WITH STANDARD FRONT CALIPERS AND 316MM (12.45") FRONT ROTORS (2013, 2013)
2013 FORD MUSTANG MODELS WITH STANDARD FRONT CALIPERS AND 336MM (13.23") FRONT ROTORS (2013, 2013)
2013 FORD MUSTANG SHELBY GT500 (2013, 2013)
2013 FORD MUSTANG BOSS 302 5.0L (2013, 2013)
2013 FORD MUSTANG GT PERFORMANCE BRAKES ALL (2013, 2013)
2013 FORD MUSTANG GT STANDARD BRAKES 5.0L (2013, 2013)
2013 FORD MUSTANG V6 FRONT ROTOR FITS MODELS W/O PERFORMANCE BRAKE PKG 3.7L (2013, 2013)
2014 FORD MUSTANG BASE, GT, OR BOSS 302 WITH BREMBO FRONT CALIPERS (2014, 2014)
2014 FORD MUSTANG MODELS WITH STANDARD FRONT CALIPERS AND 316MM (12.45") FRONT ROTORS (2014, 2014)
2014 FORD MUSTANG MODELS WITH STANDARD FRONT CALIPERS AND 336MM (13.23") FRONT ROTORS (2014, 2014)
2014 FORD MUSTANG SHELBY GT500 (2014, 2014)
2014 FORD MUSTANG GT BREMBO TRACK ALL (2014, 2014)
2014 FORD MUSTANG GT BREMBO W/AUTO TRANS ALL (2014, 2014)
2014 FORD MUSTANG GT PERFORMANCE BRAKES ALL (2014, 2014)
2014 FORD MUSTANG GT STANDARD BRAKES 5.0L (2014, 2014)
2014 FORD MUSTANG SHELBY GT500 ALL (2014, 2014)
2014 FORD MUSTANG V6 FRONT ROTOR FITS MODELS W/O PERFORMANCE BRAKE PKG 3.7L (2014, 2014)
Carbotech Brakes
GiroDisc Magic Street Pads 014-17 C7 Stingray & 2015-2017 Z06 Rear Brake Pad Set
$135.00
GiroDisc Magic Pad
Girodisc's "Magic Pads" offer a solution to common issues with factory brake pads such as squeaking, excessive dust, and high costs. These pads produce less dust compared to typical factory and performance pads, reducing the need for frequent wheel cleaning. Moreover, they provide excellent initial bite, a feature often lacking in more affordable pads. However, what truly sets our pads apart is their ability to effectively address brake noise problems, earning them the reputation of being a "silver bullet" solution. Crafted from a semi-metallic composition, Magic Pads are gentle on both rotors and your budget. When transitioning between different pad compounds, we recommend replacing all pads in the car simultaneously. Each set of Magic Pads includes pre-installed anti-noise shields at no extra cost. Should you have any inquiries, feel free to reach out to us – we're here to assist you!
The Magic Street Pad 1718 is a popular pad used on many Corvette Models:
2014 CHEVROLET CORVETTE STING RAY WITH STANDARD JL9 BRAKE PACKAGE (2014)
2014 CHEVROLET CORVETTE STING RAY Z51 - J55 BRAKE PACKAGE - OE DESIGNED CO-CAST BRAKE ROTORS (2014)
2014 CHEVROLET CORVETTE STING RAY Z51 - J55 BRAKE PACKAGE - RE-DESIGNED FULL CAST BRAKE ROTORS FOR IMPROVED COOLING (2014)
2015 CHEVROLET CORVETTE STING RAY Z51 - J55 BRAKE PACKAGE - OE DESIGNED CO-CAST BRAKE ROTORS (2015)
2015 CHEVROLET CORVETTE STING RAY Z51 - J55 BRAKE PACKAGE - RE-DESIGNED FULL CAST BRAKE ROTORS FOR IMPROVED COOLING (2015)
2015 CHEVROLET CORVETTE HEAVY DUTY (2015)
2015 CHEVROLET CORVETTE NO SUBMODEL (2015)
2015 CHEVROLET CORVETTE Z06 (2015)
2016 CHEVROLET CORVETTE NO SUBMODEL (2016)
2016 CHEVROLET CORVETTE Z06 (2016)
2017 CHEVROLET CORVETTE NO SUBMODEL (2017)
2017 CHEVROLET CORVETTE Z06 (2017)
Ferodo
Ferodo FCP578 BMW E36 M3 Rear Brake Pads
from $215.02
Ferodo FCP578 Brake Pad Set BMW Fitment BMW E36 M3 Rear calipers
DS3.12Released in 2019, the DS3.12 represents the latest advancement in Ferodo's renowned DS line. In the realm of sports cars, the demands placed on brake systems have intensified, with increased horsepower, sophisticated aerodynamics, higher curb weights, and stickier tires. Addressing these demands head-on, the Ferodo DS3.12 is a modern pad compound meticulously designed to cater explicitly to these challenges. Extensive testing has revealed that, among all pad compounds from various manufacturers, the DS3.12 exhibits the most consistent torque curve across a wide temperature range. Consequently, whether you're tackling turns, driving on any track or completing lap after lap, the brake pedal response remains remarkably consistent, offering exceptional reliability and repeatability. With a higher mu (friction coefficient) compared to Ferodo's other compounds, the DS3.12 requires less leg pressure to initiate the desired braking performance. Furthermore, it exhibits superior fade resistance, ensuring optimal performance at any temperature your brakes may encounter. Dyno testing has demonstrated that the DS3.12 maintains superior wear rates while being gentle on the discs. As a result, we anticipate the DS3.12 will establish itself as the benchmark against which other race compounds are measured.DS1.11The DS1.11, in contrast to the DS3.12, possesses a lower mu at all temperatures, making it a moderate mu pad in the realm of endurance racing compounds. It necessitates greater pedal force compared to the DS3.12 and exhibits a slight decline in torque as temperatures rise. Consequently, as you push deeper into a turn with increasing heat, you may find yourself applying more pressure on the brake pedal to achieve the same response—a sensation preferred by some drivers. Certain drivers find the DS1.11 to be more manageable when using street tires, particularly as it is less prone to activating the ABS system. While the DS1.11 offers a longer lifespan compared to many other pad compounds on the market, it falls slightly short of the longevity of the DS3.12. When maintained with a proper pad transfer layer, it remains gentle on discs even at elevated track temperatures. While the DS1.11 boasts excellent maximum temperature tolerance and fade resistance, it does not quite reach the same levels as the DS3.12. To date, we have not received reports of fading issues with the DS1.11, and most individuals differentiate between the DS1.11 and DS3.12 based on their respective tactile experiences.DS2500While we always recommend using dedicated race pads for track use, the DS2500 stands out as one of the premier hybrid street/track pads available. It combines the advantages of a track pad, such as a moderately high bite and solid fade resistance, with the comparatively lower levels of dust and noise typically associated with street pads. As a street pad, it may produce some squealing noise in specific vehicle applications, particularly when driven aggressively. For individuals who engage in spirited street driving, canyon runs, autocross, and occasional light track duty on street tires, the DS2500 is hard to surpass.
DS3000
The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear.
Ferodo FCP779 Brake Pad Rear Axle Fitment:
1995 BMW E36 M3
1996 BMW E36 M3
1997 BMW E36 M3
1998 BMW E36 M3
1999 BMW E36 M3
1998 BMW Z3 M Coupe/ Roadster
1999 BMW Z3 M Coupe/ Roadster
2000 BMW Z3 M Coupe/ Roadster
2001 BMW Z3 M Coupe/ Roadster
2002 BMW Z3 M Coupe/ Roadster
Ferodo
Ferodo FCP1281H Brake Pads
from $375.71
Ferodo FCP1281H
Ferodo Brake Compound Details:
DS3.12Released in 2019, the DS3.12 represents the latest advancement in Ferodo's renowned DS line. In the realm of sports cars, the demands placed on brake systems have intensified, with increased horsepower, sophisticated aerodynamics, higher curb weights, and stickier tires. Addressing these demands head-on, the Ferodo DS3.12 is a modern pad compound meticulously designed to cater explicitly to these challenges. Extensive testing has revealed that, among all pad compounds from various manufacturers, the DS3.12 exhibits the most consistent torque curve across a wide temperature range. Consequently, whether you're tackling turns, driving on any track or completing lap after lap, the brake pedal response remains remarkably consistent, offering exceptional reliability and repeatability. With a higher mu (friction coefficient) compared to Ferodo's other compounds, the DS3.12 requires less leg pressure to initiate the desired braking performance. Furthermore, it exhibits superior fade resistance, ensuring optimal performance at any temperature your brakes may encounter. Dyno testing has demonstrated that the DS3.12 maintains superior wear rates while being gentle on the discs. As a result, we anticipate the DS3.12 will establish itself as the benchmark against which other race compounds are measured.DS1.11The DS1.11, in contrast to the DS3.12, possesses a lower mu at all temperatures, making it a moderate mu pad in the realm of endurance racing compounds. It necessitates greater pedal force compared to the DS3.12 and exhibits a slight decline in torque as temperatures rise. Consequently, as you push deeper into a turn with increasing heat, you may find yourself applying more pressure on the brake pedal to achieve the same response—a sensation preferred by some drivers. Certain drivers find the DS1.11 to be more manageable when using street tires, particularly as it is less prone to activating the ABS system. While the DS1.11 offers a longer lifespan compared to many other pad compounds on the market, it falls slightly short of the longevity of the DS3.12. When maintained with a proper pad transfer layer, it remains gentle on discs even at elevated track temperatures. While the DS1.11 boasts excellent maximum temperature tolerance and fade resistance, it does not quite reach the same levels as the DS3.12. To date, we have not received reports of fading issues with the DS1.11, and most individuals differentiate between the DS1.11 and DS3.12 based on their respective tactile experiences.DS2500While we always recommend using dedicated race pads for track use, the DS2500 stands out as one of the premier hybrid street/track pads available. It combines the advantages of a track pad, such as a moderately high bite and solid fade resistance, with the comparatively lower levels of dust and noise typically associated with street pads. As a street pad, it may produce some squealing noise in specific vehicle applications, particularly when driven aggressively. For individuals who engage in spirited street driving, canyon runs, autocross, and occasional light track duty on street tires, the DS2500 is hard to surpass.
DS3000
The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear.
However, when employed on the track by cars weighing over 3,000 lbs., featuring high horsepower and R Compound tires, the DS2500 tends to exhibit significantly higher wear rates compared to Ferodo Racing's other compounds. If extended wear rates are a priority under these conditions, Essex recommends considering the Ferodo DS1.11 or DS3.12 as alternatives.
Ferodo FCP1281H Complete Fitment Guide:
2019 BMW M2 Competition (Rear)
2020 BMW M2 Competition (Rear)
2020 BMW M2 CS (Rear)
2021 BMW M2 Competition (Rear)
2003 Dodge Viper All Gen 3 Front & Rear
2004 Dodge Viper All Gen 3 Front & Rear
2005 Dodge Viper All Gen 3 Front & Rear
2006 Dodge Viper All Gen 3 Front & Rear
2008 Dodge Viper Gen 4 exc. ACR Front & Rear
2009 Dodge Viper Gen 4 exc. ACR Front & Rear
2010 Dodge Viper Gen 4 exc. ACR Front & Rear
2013 Dodge Viper SRT Viper Front & Rear
2014 Dodge Viper SRT Viper Front & Rear
2015 Dodge Viper SRT Viper Front & Rear
1990 Ferrari 348 Any Front
1991 Ferrari 348 Any Front
1992 Ferrari 348 Any Front
1993 Ferrari 348 Any Front
1994 Ferrari 348 Any Front
1994 Ferrari 355 Any Front
1995 Ferrari 355 Any Front
1996 Ferrari 355 Any Front
1997 Ferrari 355 Any Front
1998 Ferrari 355 Any Front
1999 Ferrari 355 Any Front
1994 Ferrari 456 GT ANY Front
1995 Ferrari 456 GT ANY Front
1996 Ferrari 456 GT ANY Front
1992 Ferrari 512 TR ANY Front
1993 Ferrari 512 TR ANY Front
1994 Ferrari 512 TR ANY Front
1988 Ferrari F40 Any Front
1989 Ferrari F40 Any Front
1990 Ferrari F40 Any Front
1991 Ferrari F40 Any Front
1992 Ferrari F40 Any Front
1994 Ferrari F50 Any Front
1995 Ferrari F50 Any Front
1996 Ferrari F50 Any Front
1997 Ferrari F50 Any Front
2008 Audi R8 Iron Disc Rear
2009 Audi R8 Iron Disc Rear
2010 Audi R8 Iron Disc Rear
2011 Audi R8 Iron Disc Rear
2012 Audi R8 Iron Disc Rear
2013 Audi R8 Iron Disc Rear
9999 Brembo Mono4 All
2017 Nissan GT-R (R35) All Rear
2016 Nissan GT-R (R35) All Rear
2015 Nissan GT-R (R35) All Rear
2014 Nissan GT-R (R35) All Rear
2013 Nissan GT-R (R35) All Rear
2012 Nissan GT-R (R35) All Rear
2011 Nissan GT-R (R35) All Rear
2010 Nissan GT-R (R35) All Rear
2009 Nissan GT-R (R35) All Rear
2016 Dodge Viper SRT Viper Front & Rear
2017 Dodge Viper SRT Viper Front & Rear
2018 Nissan GT-R (R35) All Rear
2019 BMW M2 Competition F87 All Rear
2019 Nissan GT-R (R35) All Rear
2020 Nissan GT-R (R35) All Rear
2020 BMW M2 Competition F87 All Rear
2020 BMW M2 CS F87 Iron Discs Rear
2021 BMW M2 Competition (F87) AllRear
2021 Nissan GT-R (R35) All Rear
2015 Audi R8 Iron Disc Rear
2014 Audi R8 Iron Disc Rear
2013 Lamborghini Gallardo Iron Discs Rear
2012 Lamborghini Gallardo Iron Discs Rear
2011 Lamborghini Gallardo Iron Discs Rear
2010 Lamborghini Gallardo Iron Discs Rear
2009 Lamborghini Gallardo Iron Discs Rear
2008 Lamborghini Gallardo Iron Discs Rear
2007 Lamborghini Gallardo Iron Discs Rear
2006 Lamborghini Gallardo Iron Discs Rear
2005 Lamborghini Gallardo Iron Discs Rear
2004 Lamborghini Gallardo Iron Discs Rear
Ferodo
Ferodo FCP4712H Brake Pads F87 M2 (Front)
from $607.44
Ferodo FCP4712H BMW F87 Front Brake Pad Set
Fitting the front of the BMW F87 M2, the Ferodo FCP4712H in the DS3.12 compound brake pad has the flattest torque curve across the largest temperature range with very high torque for repeatable stops, lap after lap.
Ferodo Brake Compound Details:
DS3.12Released in 2019, the DS3.12 represents the latest advancement in Ferodo's renowned DS line. In the realm of sports cars, the demands placed on brake systems have intensified, with increased horsepower, sophisticated aerodynamics, higher curb weights, and stickier tires. Addressing these demands head-on, the Ferodo DS3.12 is a modern pad compound meticulously designed to cater explicitly to these challenges. Extensive testing has revealed that, among all pad compounds from various manufacturers, the DS3.12 exhibits the most consistent torque curve across a wide temperature range. Consequently, whether you're tackling turns, driving on any track or completing lap after lap, the brake pedal response remains remarkably consistent, offering exceptional reliability and repeatability. With a higher mu (friction coefficient) compared to Ferodo's other compounds, the DS3.12 requires less leg pressure to initiate the desired braking performance. Furthermore, it exhibits superior fade resistance, ensuring optimal performance at any temperature your brakes may encounter. Dyno testing has demonstrated that the DS3.12 maintains superior wear rates while being gentle on the discs. As a result, we anticipate the DS3.12 will establish itself as the benchmark against which other race compounds are measured.DS1.11The DS1.11, in contrast to the DS3.12, possesses a lower mu at all temperatures, making it a moderate mu pad in the realm of endurance racing compounds. It necessitates greater pedal force compared to the DS3.12 and exhibits a slight decline in torque as temperatures rise. Consequently, as you push deeper into a turn with increasing heat, you may find yourself applying more pressure on the brake pedal to achieve the same response—a sensation preferred by some drivers. Certain drivers find the DS1.11 to be more manageable when using street tires, particularly as it is less prone to activating the ABS system. While the DS1.11 offers a longer lifespan compared to many other pad compounds on the market, it falls slightly short of the longevity of the DS3.12. When maintained with a proper pad transfer layer, it remains gentle on discs even at elevated track temperatures. While the DS1.11 boasts excellent maximum temperature tolerance and fade resistance, it does not quite reach the same levels as the DS3.12. To date, we have not received reports of fading issues with the DS1.11, and most individuals differentiate between the DS1.11 and DS3.12 based on their respective tactile experiences.DS2500While we always recommend using dedicated race pads for track use, the DS2500 stands out as one of the premier hybrid street/track pads available. It combines the advantages of a track pad, such as a moderately high bite and solid fade resistance, with the comparatively lower levels of dust and noise typically associated with street pads. As a street pad, it may produce some squealing noise in specific vehicle applications, particularly when driven aggressively. For individuals who engage in spirited street driving, canyon runs, autocross, and occasional light track duty on street tires, the DS2500 is hard to surpass.However, when employed on the track by cars weighing over 3,000 lbs., featuring high horsepower and R Compound tires, the DS2500 tends to exhibit significantly higher wear rates compared to Ferodo Racing's other compounds. If extended wear rates are a priority under these conditions, Essex recommends considering the Ferodo DS1.11 or DS3.12 as alternatives.
Ferodo FCP4712H BMW F87 Front Brake Pad Fitment:
Fits: BMW F87 M2 Front
Most popular track combination: Matched Set DS3.12 Front & Rear
Ferodo FCP10737G DS3.12 Complete Fitment Guide:
2019 BMW M2 Competition
2020 BMW M2 Competition
2020 BMW M2 CS
2021 BMW M2 Competition
Ferodo
Ferodo FRP3116R DS3000 AP Racing CP8350 D50 Brake Pads
$323.07
Ferodo FRP3116R-N DS3000 Compound
Fitting the AP Racing CP8350, the Ferodo FRP3116R in the DS3000 compound is a medium torque, track only brake pad. From the working temperature of 392 F to 650 F, the Ferodo DS3000 features a predictable torque curve with an average friction coefficient of 0.48µ. With good cold performance and a very flat torque curve from 450 C (850 F) to 650 C (1202 F) the DS3000 is a popular track day and sprint/intermediate race pad.Ferodo FRP3097R DS3000 Details:
Manufacturer: Ferodo
Manufacturer part number: FRP3116R-N
Compound: DS3000
Primary Use: Track day, mid-range and sprint race
Street use: No
Track only: Yes
Application: All vehicle types
Average Coefficient of Friction: 0.48µ
Temperature Range C: 200 - 650 C
Temperature Range F: 392 - 1202 F
Compatible with ceramic discs: No
Compatible with iron discs: Yes
Ferodo DS3000 Brake Compound Details:The Ferodo DS3000 is a track only brake pad designed with a predictable torque curve and good cold temperature characteristics. The DS3000 compound is a legacy compound with over 25 years of championships due to its predictability and repeatability. The Ferodo DS3000 is a very popular brake pad for vintage racers as the compound characteristics allow for extended disc life at the expense of pad wear. If you have a track car with expensive or hard to replace brake discs, the Ferodo DS3000 is a great choice.The average coefficient of friction of the Ferodo DS3000 is 0.48µ across the workable range of 392 to 1202 F. The cold friction coefficient starts at 0.40µ at 302 and reaches the peak of 0.51µ at 1022 F. This makes for a pad that is great on the early laps of a sprint race but still has the torque needed to maintain consistent pedal feel across a wide temperature range. The Ferodo DS3000 is a popular choice in brake pads for many track drivers and sprint/mid-range racers.
Ferodo FRP3116R-N DS3000 Brake Pad Fitment:
AP Racing CP8350 D50
Ferodo
Ferodo FRP3116H DS2500 AP Racing CP8350 D50 Brake Pads
$248.73
Ferodo FRP3116H-N DS2500 Compound
Fitting the AP CP8350, Wilwood Superlight 4 & Superlight 6 calipers the Ferodo FRP3116 in the DS2500 compound is one of the best street/track pads available. No need to change to track pads and then to street pads every weekend. Now enjoy linear high-torque braking on the best of mountain rides and mild track days
Ferodo FRP3097H-N Details:
Manufacturer: Ferodo
Manufacturer part number: FRP3116H-N
Pads in box: 4
Primary Use: Street Performance & Light Track
Application: All vehicle types
Average Coefficient of Friction: 0.41µ
Temperature Range C: 0 - 500 C
Temperature Range F: 32 - 932 F
Ferodo DS2500 Brake Compound Details:The Ferodo DS2500 is the best hybrid street and track day pad available. Designed for driving on the street, mountain runs and light track day with a stable average friction coefficient of 0,41 over a wide working temperature range of 32 to 932 F, (0 to 500 C)Featuring a moderately high initial bite and the solid fade resistance of a trackpad, but with relatively low dust and noise levels of a street pad. When the Ferodo DS2500 is used as a street pad, it can produce some squeal on most vehicle platforms. The most common use of the Ferodo DS2500 is mountain runs, autocross, and some light track duty on street tires in colder temperatures.When used on track on heavy (3,000+ lbs.+) track cars with high horsepower and R Compound tires, the DS2500 pad wear rates tend to be considerably higher vs. Ferodo Racing's other compounds. Do not expect to win the WRL GTU class on Ferodo DS2500 brake pads, but it is the perfect dual purpose street and light track day pad.
Ferodo FRP3116Z DSUNO Brake Pad Fitment:
AP Racing CP8350 D50
Ferodo
Ferodo FRP3116Z DSUNO AP Racing CP8350 D50 Brake Pads
$355.95
Ferodo FRP3116Z DSUNO Brake Pad
Fitting the AP Racing CP8350 D50 caliper, the Ferodo FRP3116Z in the DSUNO compound is a long duration endurance race brake pad that is also used in the Red Group of advanced track day drivers. Featuring a flat torque curve with an intermediate profile, the Ferodo DSUNO is repeatable across the entire temperature range, making it a great choice for many track drivers and racers.
Ferodo FRP219Z DSUNO Details:
Manufacturer: Ferodo
Manufacturer part number: FRP3116Z
Compound: DSUNO
Primary Use: Mid range endurance 6~ hours, track days
Street use: No
Track only: Yes
Application: All vehicle types
Average Coefficient of Friction: 0.48µ
Temperature Range C: 200 - 750 C
Temperature Range F: 392 - 1382 F
Compatible with ceramic discs: No
Compatible with iron discs: Yes
Ferodo DSUNO Brake Compound Details:The Ferodo DSUNO is a predictable mid-endurance compound designed for repeatable stopping, lap after lap. Featuring one of the flattest torque curves of the Ferodo brake pad line, the Ferodo DSUNO is a mid-distance endurance compound with an average coefficient of friction of 0.48µ across the workable range of 392 to 1382 F.The cold friction profile of the Ferodo DSUNO is low, proper bedding and warm-up is recommended for optimum performance all the way to its maximum 1382 F limit. The Ferodo DSUNO is a popular choice in brake pads for many track drivers and endurance racers.
Ferodo FRP3116Z DSUNO Brake Pad Fitment:
AP Racing CP8350 D50
Carbotech Brakes
Carbotech CT1135 Brake Pads Porsche 997-987-991-981 Front with Iron Disks
from $215.00
Carbotech CT1135 Brake Pads Porsche 997-987-991-981 Front with Iron Disks
Carbotech Race and Track Pads CT 1135 is a popular Porsche 997, 991, 981 981 Cayman and Boxster rear pad. Measuring 16mm thick and available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds
How To Properly Bed In Carbotech Racing Brake Pads
Manufacturer: Carbotech
Manufacturer part number: CT1135
Most popular track combination: R10 Front, R8 Rear
G-Loc cross reference: GP1134
Hawk cross reference: HB665._577
Material thickness of pad of backing plate and pad material: .577"
Material thickness of pad of backing plate and pad material: 15mm
Carbotech Brake Compounds
Carbotech 1521
The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800F (426C+). 1521 is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech 1521 is NOT recommended for ANY track use.
Carbotech AX6
The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50F to 1000F + (10C to 537C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6 for street driving as well, even though Carbotech doesn't recommend street driving with AX6 due to possible elevated levels of dust and noise. AX6 is NOT recommended as a race compound in most applications.
Carbotech XP8
A high torque brake compound with a wide operating temperature range of 200F-1250F+ (93C to 676C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech does NOT recommended XP8 as a daily driven street pad due to elevated levels of dust and noise. Carbotech XP8 is a great compound on the front & rear of most open wheel and sports racers.
Carbotech XP10
When Carbotech unleashed the XP10 to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10 has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475F (801C). XP10 still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech compounds so successful. Carbotech XP10 is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.
Carbotech XP12
Another highly successful XP series compound with an excellent initial bite, torque and fade resistance over and above the XP10 compound. XP12 has temperature range of 250F to 1850F+ (121C to 1010C+). The XP12 has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12 is more rotor aggressive than XP10, but compared to the competition the XP12 is still very rotor friendly. XP12 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech XP20
The latest iteration of the highly successful XP series of compounds. XP20 is a step up from the highly successful XP16 compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20 is another major step in progression of the highly successful XP series line of compounds from Carbotech. XP20 has a temperature range of 275F to 2000F+ (135C to 1093C+). Carbotech XP20 maintains our tradition of having the outstanding release and modulation that has made all other Carbotech compounds so successful. Carbotech XP20 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech XP24
XP24 is the pinnacle compound of the extremely successful XP Series of compounds engineered by Carbotech. This compound is based on the same fundamentals that exist in all other Carbotech formulations. XP24 has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24 has a temperature range of 400F to 2000F+ (204C to 1093C+). Carbotech XP24 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly.
Carbotech RP2
The RP2 compound was engineered for endurance racing based on our highly successful XP Series formulations. RP2 has strong initial bite, a little less modulation than our XP12, but still maintains the rotor friendliness of our XP series compounds. RP2 has great fade resistance with a temperature range of 250F to 1450F+ (121C to 787C). RP2 is as rotor friendly as our XP series compounds. Carbotech RP2 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.
Carbotech 913 Kelated Metallic
A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750F.
Ferodo
Ferodo FCP1307R DS3000 Porsche 986 Base Front Brake Pads
$347.44
Ferodo FCP1307R-N DS3000 Porsche 986 Base Front Brake Pads
Fitting the front of the Porsche 986 base model and many others, the Ferodo FCP1307R in the DS3000 compound is a medium torque, track only brake pad. From the working temperature of 392 F to 650 F, the Ferodo DS3000 features a predictable torque curve with an average friction coefficient of 0.48µ. With good cold performance and a very flat torque curve from 450 C (850 F) to 650 C (1202 F) the DS3000 is a popular track day and sprint/intermediate race pad.
Ferodo FCP1307R DS3000 Details:
Manufacturer: Ferodo
Manufacturer part number: FCP1307R-N
Compound: DS3000
Primary Use: Track day, mid-range and sprint race
Street use: No
Track only: Yes
Application: All vehicle types
Average Coefficient of Friction: 0.48µ
Temperature Range C: 200 - 650 C
Temperature Range F: 392 - 1202 F
Compatible with ceramic discs: No
Compatible with iron discs: Yes
Ferodo DS3000 Brake Compound Details:The Ferodo DS3000 is a track only brake pad designed with a predictable torque curve and good cold temperature characteristics. The DS3000 compound is a legacy compound with over 25 years of championships due to its predictability and repeatability. The Ferodo DS3000 is a very popular brake pad for vintage racers as the compound characteristics allow for extended disc life at the expense of pad wear. If you have a track car with expensive or hard to replace brake discs, the Ferodo DS3000 is a great choice.The average coefficient of friction of the Ferodo DS3000 is 0.48µ across the workable range of 392 to 1202 F. The cold friction coefficient starts at 0.40µ at 302 and reaches the peak of 0.51µ at 1022 F. This makes for a pad that is great on the early laps of a sprint race but still has the torque needed to maintain consistent pedal feel across a wide temperature range. The Ferodo DS3000 is a popular choice in brake pads for many track drivers and sprint/mid-range racers.
Ferodo FCP1307R-N DS3000 Brake Pad Fitment Front Axle:
1997 Porsche Boxster All
1998 Porsche Boxster All
1999 Porsche Boxster All
2000 Porsche Boxster All
2001 Porsche Boxster All
2002 Porsche Boxster 986 non-S
2003 Porsche Boxster All
2004 Porsche Boxster All
2005 Porsche Boxster All
2006 Porsche Boxster All
2007 Porsche Boxster All
2008 Porsche Boxster All
2007 Porsche Cayman All
2009 Porsche Boxster All
2009 Porsche Cayman All
2008 Porsche Cayman All
