Stilo ST5 FN ABP ZERO 8860-2018 Carbon Fiber Helmet
Stilo Stilo ST5 FN ABP ZERO 8860-2018 Carbon Fiber Helmet $6,862.00
Stilo Helmets ST5 FN ABP ZERO 8860-2018 Carbon Helmet The Advanced Ballistic Protection (ABP) features reinforced areas above the visor opening, which is 10mm lower than non-ABP models. In short, this is the highest specification helmet ever developed.   The Stilo ST5 FN ABP Zero 8860-2018 carbon helmet was designed for professional racers needing to satisfy the strict FIA 8860-2018 regulation. It’s also the helmet of choice for drivers who won’t compromise their safety, no matter where they’re racing. This certification provides an unparalleled level of puncture protection and impact resistance. Try as you may, you won’t find a safer, lighter-weight helmet anywhere. The Stilo ST5 FN ABP Zero 8860-2018 is the lightest-weight carbon fiber racing helmet on the market. While it lacks the side ports of the Stilo Helmets ST5 GT 8860-2018 carbon helmet, it can still be outfitted with top forced air and a helmet eject system. The innovative design incorporates mounting and routing for these options at the time of manufacture, so integration is sleek and seamless with nothing hanging down or otherwise getting in the way. When not in use, you don't even know these features are there. Looking for increased visibility? The Stilo Helmets ST5 FN Zero 8860-2018 has a taller, lower-set eye port, giving you better visibility while not compromising safety. Stilo visors use a center pinch-clip to make opening and closing easy, even while wearing Nomex racing gloves. We have found that Stilo customers who typically wear a size 59 helmet are most comfortable in size 60, which uses the large shell. Please order accordingly. FEATURES: FIA 8860-2018 certified Includes standard HANS post anchors Includes Stilo Helmet & HNR bag Sizing from XS through 3XL All ST5 shields are now interchangeable across all ST5 helmets Eight ventilation holes for use with Stilo Helmets Top Air systems Redesigned cheek pads are more contoured and comfortable than previous Stilo helmets Stilo ZERO shells are the lightest FIA 8860-2018 helmets available WEIGHT: Small shell: 930 g / 2.1 lbs up to size L (59) Large shell: 1.23 kg / 2.7 lbs up to size 3XL (64) For the GT version of this helmet (includes integrated side ports), please see the Stilo Helmets ST5 GT Zero 8860-2018 Carbon Helmet. This helmet will require your signature for delivery. An effective helmet is one that fits properly. Have an assistant use a measuring tape or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements to make sure you have the largest one.
-11% sale
Stilo ST5 GT ZERO 8860-2018 Carbon Fiber Helmet
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo ST5 GT ZERO 8860-2018 Carbon Fiber Helmet $5,766.95 $6,408.00
  Stilo ST5 GT Zero 8860-2018 Carbon Helmet The Stilo Helmets ST5 GT Zero 8860-2018 carbon helmet was designed for professional racers needing to satisfy the strict FIA 8860-2018 regulation. It’s also the helmet of choice for drivers who won’t compromise their safety, no matter where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance. Try as you may, you won’t find a safer, lighter-weight helmet anywhere. The Stilo Helmets ST5 GT Zero 8860-2018 carbon helmet is the lightest-weight carbon fiber racing helmet on the market (weight listed below). It has two integrated side ports each of which can accommodate electronics, forced air, helmet eject system, or a hydration system. This innovative design incorporates mounting and routing for these options into the helmet shell, so integration is sleek and seamless. When not in use, you don't even know the side ports are there. For the "Naked" version of this helmet (without side ports), please see the Stilo Helmets ST5 N Zero 8860-2018 Carbon Helmet . INCREASED VISIBILITY The Stilo Helmets ST5 GT Zero 8860-2018 carbon helmet has a taller and lower eyeport, giving you better visibility without compromising your safety. Each visor has a center pinch-clip to make opening and closing easy even while wearing nomex racing gloves. Sizing note: We have found that customers who typically wear a size 59 helmet are more comfortable in size 60, which uses the large shell. Please order accordingly. FEATURES FIA 8860-2018 Certified Significantly lighter than the previous ST4 helmets All ST5 shields are now interchangeable across all ST5 helmets Includes standard HANS post anchors Includes Stilo bag for your helmet and HNR Eight ventilation holes for use with Stilo Helmets Top Air systems Re-designed cheek pads are more contoured and comfortable than previous ST4 helmets Stilo ZERO shells are the lightest FIA 8860-2018 helmets available WEIGHT (including intercom) Small Shell: 1130 Grams / 2.49 lbs up to size L (59) Large Shell: 1230 Grams / 2.71 lbs up to size 3XL (64) This helmet will ship to you with signature required for delivery. An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It's a good idea to take several measurements to make sure you have the largest one.  
-11% sale
Stilo ST5 N ZERO 8860-2018 Carbon Fiber Helmet
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo ST5 N ZERO 8860-2018 Carbon Fiber Helmet $5,766.95 $6,408.00
Stilo Helmets ST5 N Zero 8860-2018 Carbon Helmet The Stilo Helmets ST5 N Zero 8860-2018 carbon helmet was designed for professional racers needing to satisfy the strict new FIA 8860-2018 regulations. It’s also the helmet of choice for drivers who won’t compromise their safety no matter where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance. Try as you may, you won’t find a safer, lighter-weight helmet anywhere. The Stilo Helmets ST5 N Zero 8860-2018 is the lightest-weight carbon fiber racing helmet on the market. While it lacks the side ports of the Stilo Helmets ST5 GT 8860-2018 carbon helmet, it can still be outfitted with electronics, top forced air and a helmet eject system. Thanks to the innovative design which incorporates mounting and routing for these options at the time of manufacture, integration is sleek and seamless with nothing protruding from the helmet, hanging down or otherwise getting in the way. When not in use, you don't even know these features are there. Looking for increased visibility? The Stilo Helmets ST5 N Zero 8860-2018 has a taller and lower eye port, giving you better visibility while not compromising your safety. Each visor has a center pinch-clip to make opening and closing easy, even while wearing Nomex racing gloves. With Stilo helmets, we have found that customers who typically wear a size 59 helmet are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. FEATURES: FIA 8860-2018 certified Includes standard HANS post anchors Includes Stilo Helmet & HNR bag Sizing from XS through 3XL ST5 shields are now interchangeable across all ST5 helmets Eight ventilation holes for use with Stilo Helmets Top Air systems Redesigned cheek pads are more contoured and comfortable than previous designs Stilo ZERO shells are the lightest FIA 8860-2018 helmets available WEIGHT (INCLUDING COMM SYSTEM): Small Shell: 1130 Grams / 2.5 lbs up to size L(59) Large Shell: 1230 Grams / 2.7 lbs up to size 3XL (64)   For the GT version of this helmet (includes integrated side ports), please see the Stilo Helmets ST5 GT Zero 8860-2018 Carbon Helmet. This helmet will require your signature for delivery. An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements to make sure you have the largest one.
Bell HP77 8860-2018 Carbon Fiber Helmet
Bell Bell HP77 8860-2018 Carbon Fiber Helmet $5,750.00
Bell HP77 8860-2018 Carbon Fiber Helmet The HP77, based on Bell’s highly successful F1 World Champion proven HP7 design, provides the latest impact protection by lowering the visor opening by 12 mm and reinforcing the front of the helmet with advanced ballistic protection. The HP77 is the most advanced FIA8860-2018 helmet in Bell’s product line and sets a new standard for a lightweight, aerodynamically superior carbon fiber helmet performance for the intense demands of open-wheel and open-cockpit forms of racing. The HP77 is homologated to the FIA8860-2018 ABP standard, the most rigorous sport helmet standard on the planet. The HP77 was designed for professional formula racers competing at the highest levels of the sport and for any other racing driver who treats safety as a paramount importance. FEATURES: Homologation: FIA8860-2018 ABP Visor opening lowered 12 mm for added ballistic protection from middle size debris High-strength and high modulus carbon fiber ultra-lightweight carbon shell Advanced multi-density, multi-piece liner for energy absorption and impact performance Optical grade injection molded Double Screen Anti-Fog (DSAF) visor Top and chin bar ventilation system with 12 air intake and extraction channels Air intake system includes two-part center and side air intakes Shell and shield design optimized to improve aerodynamic performance Integrated channels for drink tube and radio systems Top spoiler, top and chin bar gurneys available separately Factory installed HANS anchors Available front chinbar hole for drink tube HP helmet bag included Color: Carbon, Matte Finish Sizes: 54 to 59+ All sizes shown in centimeters Shield and pivot kit: SE77 shield , SV(SE07) pivot kit Alternative interior fabric colors: Black, White, Red, Tan, Purple, Blue, Green and Neon Yellow (by special order - additional charges will apply). Grey is standard
Arai GP-7SRC ABP 8860-2018 Carbon Fiber Helmet
Arai Arai GP-7SRC ABP 8860-2018 Carbon Fiber Helmet $4,599.95
    Arai 8860-2018 ABP Carbon Fiber Helmet The new GP-7SRC ABP is a stunning example of Arai‚Äôs vision and technological mastery, engineered into a functional, real-world piece of safety equipment. It begins with a startling advancement: a proprietary Carbon Fiber (CF) weave that combines CF‚Äôs existing benefits of high strength and extreme light weight. But there's a major added benefit that standard CF does not possess: flexibility. (Standard CF tends to splinter or shatter instead of flex on impact.) The result is a helmet ready for the unparalleled demands and requirements of high end closed-cockpit racing. The remaining list of GP-7SRC features and advances is impressive because, for this helmet and its prospective user, it simply has to be. The GP-7SRC ABP meets or exceeds the FIA 8860-2018 ABP homologation standard. ABP (ADVANCED BALLISTIC PROTECTION) FIA's new ABP (Advanced Ballistic Protection) specification is intended especially for drivers in open cars. The GP-7SRC ABP has been strengthened in the forehead area, incorporating an external intrusion panel (previously mounted to the shield) that is now integrated into the helmet shell itself. The ABP homologation was written to reduce the risk of injury from debris or other objects striking a driver‚Äôs head. VENTILATION Three large, closeable, intake vents combined with larger 10mm holes and two aditional exhaust vents in the center of the helmet greatly increase air flow. A redesigned exhaust cowling improves aerodynamics, drawing out hot air escaping the helmet. The GP-7SRC comes with all vents unattached so you can customize the vent configuration to your specific needs. POSITIVE SHIELD LATCH Arai's positive latch mechanism provides solid shield closure while allowing normal operation of the shield. Designed as an integral component of the shield system, not just an add-on afterthought, its functional simplicity belies the complexity of the design. HANS POST ANCHORS Integrated seats accommodate a variety of Head and Neck Restraint devices. Pre-installed M6 threaded washer/nut with 6mm threads accepts a variety of anchor systems, making installation easy. The flat surface around the mounting nut allows the anchor post to rest flush on the helmet surface. SHELL Arai's proprietary carbon fiber material and weave provide an extremely strong yet flexible material, helping manage impact energy. Multiple reinforcing materials are used to improve performance while keeping weight and bulk to a minimum. EJECT READY CROWN PAD Pre-cut pocket under the crown pad can be easily removed to accommodate the optional eject system. DRINK TUBE COMPATIBILITY The GP-7SRC chin liner is now more easily removed to install a drink tube into the liner. The chin liner comes standard with four different drink hose placements.   GET THE BEST FIT Available in sizes Extra-Small to Large An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It's a good idea to take several measurements to make sure you have the largest one. This helmet will ship to you with signature required for delivery.
-11% sale
Stilo ST5 FN ABP 8860-2018 Carbon Fiber Helmet
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo ST5 FN ABP 8860-2018 Carbon Fiber Helmet $4,118.95 $4,577.00
Stilo ST5 FN ABP 8860-2018 Carbon Helmet The Stilo ST5 FN ABP 8860-2018 carbon helmet was designed for professional racers needing to satisfy the latest FIA 8860-2018 regulation. It‚Äôs also the helmet of choice for drivers who won‚Äôt compromise their safety, no matter where they‚Äôre racing. This certification provides an unparalleled level of puncture protection as well as impact resistance. ABP is an acronym for Advanced Ballistic Protection. The ABP replaces the previous zylon panel required by FIA in the previous generation (FIA 8860-2010) helmets, integrating a stronger protection into the front of the helmet shell. A brand new test was specifically introduced to test this area, based on military ballistic specifications with a projectile shot at 250 km/h. The Stilo ST5 FN ABP is the first helmet to be certified to this new standard, offering a higher safety degree while maintaining dimensions and weight! ¬† The ST5 FN ABP 8860-2018 is among the lightest carbon fiber racing helmets on the market. While it lacks the side ports of the Stilo Helmets ST5 GT 8860-2018 Carbon Helmet, it can still be outfitted with electronics, top forced air and a helmet eject system. Thanks to the innovative design incorporating mounting and routing for these options, integration is sleek and seamless with nothing protruding from the helmet, hanging down or otherwise getting in the way. When not in use, you don't even know they're there. Looking for increased visibility? The Stilo ST5 FN ABP 8860-2018 has a taller and lower-placed eyeport, giving you better visibility while not compromising your safety. Every Stilo visor has a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves. We have found that Stilo customers who typically wear a size 59 helmet are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. FEATURES: FIA 8860-2018 Certified Includes Stilo HANS posts Significantly lighter than the previous Stilo helmets Sizing from XS through 3XL Stilo ST5 shields are now interchangeable across all ST5 helmets Eight ventilation holes for use with Stilo Helmets Top Air systems Redesigned¬†cheek pads are more contoured and comfortable than previous Stilo helmets Made from 100% medium¬†tensile carbon Weight (+/-30 g): Small shell 1.20 kg (2.6 lbs) Large shell 1.32 kg (2.9 lbs) For the absolute lightest FIA 8860-2018 ABP helmet on the market, see the Stilo Helmets ST5 FN ABP ZERO 8860-2018 Carbon Helmet. An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements to make sure you have the largest one. This helmet will ship to you with signature required for delivery.
Arai GP-7SRC 8860-2018 Carbon Fiber Helmet
Arai Arai GP-7SRC 8860-2018 Carbon Fiber Helmet $4,095.00
Arai GP-7SRC 8860-2018 Carbon Fiber Helmet   The new GP-7SRC is a stunning example of Arai‚Äôs vision and technological mastery, engineered into a functional, real-world piece of safety equipment. It begins with a startling advancement: a proprietary carbon fiber weave that combines its existing properties of high strength and extreme light weight. This proprietary carbon fiber has a property that standard carbon fiber does not possess: flexibility. (Standard carbon fiber tends to splinter or shatter instead of flex on impact.) The result is a helmet ready for the unparalleled demands and requirements of high end closed-cockpit racing. The remaining list of GP-7SRC features and advances is impressive because, for this helmet and its prospective user, it simply has to be. The GP-7SRC meets or exceeds the latest FIA 8860-2018 homologation standards. Fits Intermediate-Oval head shapes. VENTILATION Large, closable intake vents combined with a 10mm vent greatly increase air intake. Larger 10mm rear vent hole increases air flow further compared to previous models. POSITIVE SHIELD LATCH Positive latch mechanism provides solid shield latching while allowing normal operation of the shield. Designed to be an integral component of the shield system, not just an add-on afterthought. Simplicity of the function belies the complexity of the design. HANS POST ANCHORS Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-installed M6 threaded washer/nut with 6mm threads accepst a variety of anchor systems, making installation much easier. Flat surface area around the mounting nut allows the anchor post base to rest flush with the helmet surface. SHELL Proprietary carbon fiber material and weave provide an extremely strong yet flexible material, helping manage impact energy. Multiple reinforcing materials are used to improve performance and keep weight and size to a minimum. EJECT READY CROWN PAD Pre-cut pocket under the crown pad can be easily removed to accommodate the optional eject system. DRINK TUBE COMPATIBILITY The GP-7SRC chin liner is now more easily removed to install a drink tube into the liner. The chin liner comes standard with four different drink hose placements.   GET THE BEST FIT The GP-7SRC 8860-2018 is available in sizes Extra Small to Large An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements to make sure you have the largest one.   This helmet will ship to you with signature required for delivery.
Bell HP7 8860 Carbon Fiber Helmet
Bell Bell HP7 8860 Carbon Fiber Helmet $3,999.95
Bell HP7 Carbon Fiber FIA 8860-218 Helmet The FIA 8860 homologated Carbon Fiber HP7 has been developed in a close collaboration with leading F1 drivers and teams to create an aerodynamically sleek, ultra-lightweight and efficient racing helmet suited to the intense demands of open-wheel, open-cockpit racing that compete at higher speeds.  Designed for professional racers, the 8860 (or “super helmet”) standard was developed by the FIA to improve overall helmet performance and protection; it's the most stringent racing helmet standard in the world. The HP7 is available in two versions: with or without a "duckbill" chin spoiler, which provides enhanced aerodynamic stability in high-speed, open-cockpit environments. FEATURES: Snell SA2015 and FIA8860-2010 homologations. HP7 absorbs up to 40% more energy than standard models on certain impacts. Ultra-lightweight shell made using aerospace-grade carbon. Innovative shield design improves acoustic comfort, aerodynamic performance and energy absorption. Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection. Kevlar-reinforced liner adds protection. Multi-density comfort foams and padding ensure excellent fit. 14 air intake and extraction channels, dual-chamber intake maximizes airflow around the head and face. Titanium hardware and optical-grade injected Double-Screen Anti Fog (DSAF) shield. Hollow synthetic rubber gasket seal keeps water, dust, and debris out. Removable chin guard and various-thickness padding accommodates different cheek and jaw shapes. Integrated channels offer multiple options to install integrated drinking tube and radio microphone systems. Aerodynamic accessories including chin bar, top Gurneys and rear spoiler (sold separately). Top-air configuration with eyeport, eight- and ten-hole airflow options (sold separately). Ultra-plush grey Comfort-Max FR® improves comfort and moisture wicking. Velcro cheek pads, recessed ear area in liner allow integration of ear cups. Narrow eyeport. SE07 3MM DSAF clear shield (SV SE07 pivot system). Zylon-reinforced visor panel available (sold separately, must be factory installed). Complete with HANS anchors and hex wrench. This helmet will ship to you with signature required for delivery.
-11% sale
Stilo ST5 GT 8860-2018 Carbon Fiber Helmet
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo ST5 GT 8860-2018 Carbon Fiber Helmet $3,603.95 $4,005.00
STILO ST5 GT 8860 CARBON FIBER HELMET The Stilo Helmets ST5 GT 8860-2018 carbon helmet was designed for professional racers needing to satisfy the strict FIA 8860-2018 regulations. It’s also the helmet of choice for drivers who won’t compromise their safety, no matter where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance. ULTRALIGHT & ADAPTABLE The Stilo Helmets ST5 GT 8860-2018 is among the lightest-weight carbon fiber racing helmets on the market. With its two integrated side ports, it can be outfitted with any combination of electronics, side- or top-forced air, hydration, and a helmet eject system. Thanks to the innovative design which incorporates mounting and routing for these options at the time of manufacture, integration is sleek and seamless. When not in use, you don't even know these features are there. Looking for increased visibility? The Stilo Helmets ST5 GT 8860-2018 has a taller and lower eyeport, giving you better visibility while not compromising your safety. Each visor has a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves. Size Note: We have found that customers who typically wear a size 59 helmet are most comfortable in size 60, which uses the large shell. Please order accordingly. FEATURES FIA 8860-2018 Certified Includes Stilo HANS posts Significantly lighter than the previous ST4 helmets Sizing from Extra Small through 3XL All ST5 shields are now interchangeable across all ST5 helmets Eight ventilation holes for use with Stilo Helmets Top Air systems Prepared for side and frontal drinking systems Redesigned cheek pads are more contoured and comfortable than previous ST4 helmets Made from 100% medium tensile carbon Weight (intercom included) +/-30 g: small shell 1.370 kg (3.0 lbs) large shell 1.470 kg (3.2 lbs) OTHER FIA 8860-2018 HELMETS FROM STILO For the absolute lightest weight 8860 approved helmet, with integrated side ports, please see the Stilo Helmets ST5 GT ZERO 8860-2018 Carbon Helmet. For the ZERO version without side ports, please see the Stilo Helmets ST5 N ZERO 8860-2018 Carbon Helmet. This helmet will ship to you with signature required for delivery. An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements to make sure you have the largest one.
Bell HP6 8860-2018 Carbon Fiber Helmet
Bell Bell HP6 8860-2018 Carbon Fiber Helmet $2,399.95
Bell HP6 8860-2018 Carbon Fiber Helmet Incorporating technology used in our state-of-the-art HP7 Advanced Helmets, the HP6, with its modern and aggressive design, has been developed for racers in closed-car environments, featuring a wide eyeport for extended vision with an ultra-lightweight Advanced carbon shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. It can be fitted with optional earcups providing optimal noise insulation, with fully integrated radio communication kit and hydration systems (available separately or in RD version). FEATURES Ultra-lightweight FIA8860-2018 Advanced full carbon shell Wide eyeport opening for optimal vision in closed cockpit cars Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Integrated channels in face piece offering multiple options to install drinking tube, valves, and radio systems Extraction vents to maximize cooling and air circulation Factory installed Hans anchors as original equipment Optional Top forced air intake can be installed on the left or right top side vents - available for use with and external cooling system Forced air kits available for aftermarket including Quick Lock (V10) and are fully compatible with Maglock Optional earcups for increased noise insulation HP helmet bag included Interior: Dark Grey High Strength – High Comfort FR Fabric Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order) Color: Carbon, Matte Finish Homologation: FIA8860-2018 Sizes: 6 3/4 (54) to 7 5/8+ (61+) IN THE BOX HP6 Clear SE06 3mm DSAF Shield Installed HP Helmet Bag Plastic Tearoff Posts Installed Hex Wrench Key
-11% sale
Stilo ST5.1 GT Carbon Fiber Helmet SA2020
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo ST5.1 GT Carbon Fiber Helmet SA2020 $2,038.95 $2,266.00
Stilo ST5.1 GT Carbon SA2020 Helmet The ST5.1 GT Carbon is Stilo's Snell SA2020-compliant version of their best-selling carbon helmet. With an autoclave molded carbon fiber shell, the ST5.1 GT Carbon offers strength superior to fiberglass and composites while minimizing weight. With its large eyeport, the Stilo ST5.1 GT Carbon offers unsurpassed peripheral vision and all of the available tinted, mirrored, and iridium-colored visors (sold separately) have a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves. Although updated to meet the newest Snell SA2020 certification, the Stilo ST5.1 GT Carbon retains its FIA 8858-2015 homologation as well. This makes the helmet legal for nearly all road race usage (except for those sanctioning bodies requiring FIA 8860 homologation). INTEGRATED FLEXIBILITY The Stilo ST5.1 GT Composite is unsurpased in built-in flexibility. Its two side ports can be fitted with three different types of integrated communication electronics, forced air, helmet eject system, or a hydration system. Thanks to its innovative shell design, mounting and routing these options to the ST5.1 GT is sleek and seamless. When not in use, you don't even know the features are there. Whether you're using side-mounted communications, side air, or a built-in hydration kit for staying hydrated during long enduro stints, everything is neat, tidy and completely out of the way when not needed. Stilo offers simply the best modular racing helmet on the market. Industry-standard M6 threaded receivers are molded into the helmet shell to accommodate anchors for whichever head-and-neck restraint you use. Size Note: We have found that customers who typically wear a size 59 helmet are most comfortable in size 60, which uses the large shell. Please order accordingly. FEATURES: Noise attenuating earmuffs to reduce exterior noise Ports for integrated communications, forced air, or hydration SA2020 Snell certification offers increased protection All existing Stilo ST5 shields and other Stilo accessories work on new ST5.1 SA2020 helmets OTHER VERSIONS OF THE STILO ST5.1: For the composite version, see the Stilo Helmets ST5.1 GT Composite Helmet. For the FIA 8860-2018 version, see the Stilo Helmets ST5 GT Zero 8860-2018 Carbon Helmet. An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements, and order your helmet based on the largest of those measurements. This helmet will ship to you with signature required for delivery.
Bell RS7C LTWT Carbon Fiber Helmet SA2020
Bell Bell RS7C LTWT Carbon Fiber Helmet SA2020 $1,999.95
  Bell RS7C LTWT Carbon Fiber Helmet SA2020 Based on the HP7 design and featuring a lightweight carbon composite shell using Bell‚Äôs high-pressure proprietary molding system, the RS7 LTWT Carbon uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance, and energy absorbing capabilities. The Double Screen Anti-Fog (DSAF) shield and rubber gasket seal ensure air, water, and dust will not enter the eyeport. FEATURES Aerospace-grade, ultra-lightweight carbon fiber shell. Snell SA2020 approved. Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance. Multi-purpose fit system that can be used with or without included ear cups. Optical grade injection molded Double Screen Anti-Fog (DSAF) visor. Top and chin bar ventilation system with 14 air intake and extraction channels. Interior ventilation channels enhanced to maximize airflow. Shell and shield design optimized to improve aerodynamic performance. Integrated channels in face piece offer multiple options to install drink tube and radio systems. Top spoiler, top and chin bar gurneys available separately. Top air attachments available separately. Factory installed HANS anchors. Synthetic rubber gasket seal to prevent dirt and water from entering the helmet. Shield and pivot kit: SE07, SV(SE07). Color: Carbon Matte Clear. Sizes: 7 1/8- (57-) to 7 5/8+ (61+). All sizes shown in centimeters.
Schuberth SP1 Carbon Fiber SA2020 Helmet
Schuberth Schuberth SP1 Carbon Fiber SA2020 Helmet $1,949.00
Schuberth SP1 Carbon Helmet SNELL SA2020 & FIA 8859-2015 With nearly 100 years dedicated to developing head protection solutions -- and 20 years of providing the most technologically advanced helmets to top drivers in F1, IndyCar and other top series -- Schuberth presents its first motorsport helmet with both FIA 8859-2015 and SNELL SA2020 certifications: the SP1 Carbon. AERODYNAMICS & VENTILATION The SP1 Carbon was developed with extensive wind tunnel testing to achieve ideal aerodynamics and optimum air flow. It offers a perfect aerodynamic balance that can be customized with various spoilers and ventilation scoops to meet the requirements of every type of racing. With 12 ventilation channels across the SP1's shell, optimum circulation is achieved through aerodynamic design and air flow channels built into the EPS (interior padding), providing the ideal flow for intake of cool air and exhaust of hot air. COMMUNICATION SYSTEM READY Channels in the cheek pads allow for easy installation of radio communications. A full selection of plug & play integrated electronics are available as options. From comfortable ear cup speakers to a 3.5mm jack for your ear buds -- or a system with both! -- you can choose a mic integrated into your chin pad or a boom mic. Schuberth helmet communications options make it easy to seamlessly integrate your race comms.  FULL CARBON SHELL & 3MM VISOR Every SP1 Carbon helmet is produced in Schuberth's own factory in Italy, by the same hands that produce the masterpiece SF3 FIA 8860-2018 ABP helmets used by many F1 drivers. The SP1 uses an exclusive, autoclave-cured carbon fiber shell handcrafted to create a unique helmet combining light weight, solid construction and superior safety in an iconic design. The SP1's 3D Injected visor is directly derived from their F1 expertise, offering 12 hues ranging from transparent to dark with several mirroring and multi-layered coating options. All standard visors are Pinlock 120 lens equipped for optimum fog resistant performance. External tear-off buttons are also installed. AVAILABLE ACCESSORIES Schuberth SP1 Top Air Schuberth SP1 Individual Vent Scoops Schuberth SP1 Visors Schuberth SP1 Scoops Shuberth SP1 Helmet Bag Schuberth SP1 Visor Pouch WEIGHT Small shell (XS, S, M, L): 3.0 lb (1.36 kg) Large shell (L+, XL, XXL): 3.2 lb (1.46 kg)
Bell RS7 Carbon Fiber Helmet SA2020
Bell Bell RS7 Carbon Fiber Helmet SA2020 $1,499.95
Bell RS7 Carbon Fiber Helmet SA2020 The Bell RS7 Carbon Fiber SA2020 helmet features Bell’s high-pressure, proprietary molding system based on the innovative HP7 design. This ultra-lightweight carbon shell is designed for optimum acoustic comfort, energy absorbing capability, and gives the Bell RS7 Carbon Fiber SA2020 helmet ideal aerodynamic performance. Top forced air inserts improve internal ventilation while the hollow synthetic rubber gasket seal ensures that air, water, and dust won’t enter the helmet in outdoor environments. The Bell RS7 Carbon Fiber SA2020 helmet’s advanced ventilation system features 14 intake and extraction channels with air intake covers in a refined aero design for the most discerning racers. FEATURES: Snell SA2020 and FIA 8859-2015 homologation. Includes clear SE07 3MM DSAF shield (SV SE07 pivot system) and DSAF anti-fog insert. Ultra-lightweight carbon fiber shell, high-pressure molding system improves shell strength. 14 intake and exhaust channels provide amazing ventilation. Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection. Improve high-speed aerodynamic stability with optional chin bar and top Gurneys and rear spoiler (sold separately). Top forced-air inserts including eyeport, eight-hole and ten-hole options when used with forced air system (sold separately). Integrated channels for optional integrated drinking tube and radio microphone systems. Ultra-plush grey Comfort-Max FR® interior fabric provides superior moisture wicking. Pro-style, multi-density foam interior with contoured cheek pads for professional fit. Narrow eye port. M6 terminal hardware and hex wrench for Head and Neck Restraint anchors. This helmet will ship to you with signature required for delivery.
Bell GT6 Carbon Fiber Helmet SA2020
Bell Bell GT6 Carbon Fiber Helmet SA2020 $1,249.95
Bell GT6 Carbon Fiber Helmet SA2020 Derived from HP6, the GT6 CARBON features the same modern and aggressive design, developed for racers in closed-car environments, featuring a wide eyeport for extended vision with an ultra-lightweight Premium carbon shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. It can be fitted with optional earcups providing optimal noise insulation, with fully integrated radio communication kit and hydration systems (available separately or in RD version). FEATURES Ultra-lightweight Premium Carbon Composite shell Wide eyeport opening for optimal vision in closed cockpit cars Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Integrated channels in face piece offering multiple options to install drinking tube, valves, and radio systems Extraction vents to maximize cooling and air circulation Factory installed Hans anchors as original equipment Optional Top and Side air intakes available for use with external cooling system Optional earcups for increased noise insulation Interior: Dark Grey High Strength – High Comfort FR Fabric Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order) Color: Carbon, Gloss Finish Homologation: FIA8859-2015 & Snell SA2020 Sizes: 6 3/4 (54) to 7 5/8+ (61+) IN THE BOX GT6 Carbon Clear SE06 3mm DSAF Shield Installed Drawstring Helmet Bag Plastic Tearoff Posts Installed Hex Wrench Key