Club Discount

Spring Loaded Window Net Install Kit Install Window Nets In Your Racecar Using The Allstar 10219 Spring Loaded Window Net Installation Kits. Your window safety net keeps your head and arms inside of a tumbling car - make sure that it's secured properly. Hardware and/or mounting brackets are included. Spring Loaded Window Net Install Kit Details: Spring-loaded tube Provides easy entry and exit 9/16in spring loaded top tube 3/4in flat aluminum strap for bottom of net Includes mounting hardware, handle, and instructions Designed for most border and loop style nets Window Net Installation Kit, Round Tube, Spring-Loaded Type, Includes both top and bottoms bars to make this a complete kit.

Longacre Toe-In Plates with Magnets The Longacre 52-79501 Toe-In Plates use magnets to hold the far end of the tape measure securely while you read the close-end measurement. Simple and easy to store in the spares kit, Longacre toe plates are a trackside must have. Longacre Toe Plates keep the highest value race cars at the front of the pack. Longacre Toe-In Plates with Magnets (pair) is a track side favorite with many teams from ChampCar to Grand-Am. Longacre Toe Plates with Magnets Details: Manufacturer: Longacre Racing Manufacturer Part Number: 52-79501 Quickest and simplest way to measure toe-in Rest one of these plates against the tire on each side and measure toe directly using the 2 tapes (included) Formed design is rigid for accuracy and stays put against the tire Magnets hold tape in place Dimensions: 23 1/2" x 9" [img-5557-left-large_default] How to use Longacre Toe Plates: This is a fast way to check / set front end toe. It is affected by wheel or tire runout. Be certain wheels run true and tires have no bulges. Turn wheels to straight ahead: Should be done on level ground. Set caster & camber first. Lean plates up against wheels: Folded lip goes to the outside. Be sure the entire plate is up against the wheel. Measure front width, then rear: Use the slots for the tape measure. Subtract one from the other for toe. Larger front width means toe-out. [img-2164-left-large_default]

Alpinestars SP v2 Racing Shoes The redesigned Alpinestars SP v2 racing shoe is SFI-homologated, with an exceptional new design and premium features in an affordable shoe. Alpinestars newly developed asymmetric lacing system gives the SP v2 a supportive, comfortable closure and customized fit. Laser cut perforations incorporated into this anatomically profiled shoe give it excellent breathability The SP v2 also features Alpinestars exclusive ultra-thin F1-specification sole, with special line-textured grip and improved pedal feel. Alpinestars foot counter features multi-compound construction and ergonomic polypropylene heel counter, which provides support, protection, and stability plus an integrated PU fireproof heel for added safety. ALPINESTARS SP V2 RACE SHOE CONSTRUCTION Main upper constructed from premium suede for optimum durability, comfort and fit Sleek shoe profile developed in Formula 1 to offer optimized performance both in and out of the car Full tongue upper constructed from perforated leather for enhanced ventilation and optimized breathability Asymmetric toe design and traditional lacing plus hidden loops closure system for a precise, secure, personalized fit ALPINESTARS SP V2 RACE SHOE KEY FEATURES Collar padding constructed from nitrile rubber for comfort Lightweight micro-porous padding around the heel and insole enhances comfort FIA/Alpinestars homologation label on the tongue made from fireproof PU film transfer Alpinestars multi-compound heel counter plus integrated PU fireproof heel for comfort Alpinestars exclusive ultra-thin F1-spec sole uses exclusive lightweight rubber textured grip for improved pedal feel  

Stilo HANS Helmet Post Anchors (for SA2015 and newer) Stilo branded HANS helmet post anchors to attach your HANS or Stand21 head-and-neck restraint to your Snell SA2015 or SA2020 helmet. (Those helmets have threaded M6 inserts molded into the helmet.) These post anchors are FIA-approved and screw right into those helmet inserts. Stilo's FIA Approved HANS Posts In Black/Blue/Red Anodized Metal With Laser Engraving Dresses Up Every Stilo build. These are the Stilo FIA Internationally Approved Hans Posts.  Includes one pair (does one helmet) Stilo FIA HANS Posts in Red Details: Manufacturer: Stilo Manufacturer part number: AK 1131.12K-Stilo AK113112K-STILO BLACK Manufacturer part number: AK 1131.12B-Stilo AK113112B-STILO BLUE Manufacturer part number: AK 1131.12R-Stilo AK113112R-STILO RED Qty in kit: Two Color: Red Nut washers included: No FIA approved: Yes

Molecule Refresh Race Fabric Deodorizer Molecule Refresh gives your racing garments a quick breath of fresh air, reducing odors of all types on technical fabrics like Aramid and Nomex. Refresh is more than just a cover-up; it contains antimicrobial agents to inhibit the growth of odor-causing bacteria while maintaining fabric breathability. Cosmetics-grade, skin-friendly ingredients ensure that your race suit, underlayers, gloves, etc. stay comfortable. With its light, fresh scent, Molecule Refresh is recommended for technical fabrics, including Nomex. Contains proprietary Pico12 suppression technology to inhibit growth of odors Reduces odors on all types of technical fabrics Cosmetic-grade, skin-friendly and sanitizing ingredients FDA compliant antimicrobial – BKC Maintains fabric breathability Light fresh scent 16 oz. size designed for larger surfaces, uniforms, bags and other equipment MOLECULE REFRESH is a lightly scented spray specifically formulated to deodorize performance wear and equipment. Cosmetic-grade formula contains proprietary Pico12 suppression technology to attack odors at the source and inhibit growth. Containing benzalkonium chloride (BKC) sanitizing ingredient, REFRESH keeps you clean, healthy and performing at your best. Instructions for Use Allow garment or equipment to air dry.  Shake well and spray MOLECULE REFRESH evenly, covering all surfaces. In well ventilated area, allow to fully dry before wearing. Becomes more effective with repeated use.

Longacre Complete Drink Kit 1.5" Complete Longacre Drink kit for 1.5" roll bar. This complete Longacre Drink Holder & insulated bottle with extra length drink hose & bite valve keep you hydrated during those hot summer or long races. Details: Large capacity(42oz) double insulated bottle with tube Includes "bite valve" to avoid leaks from tube Bolts onto your roll bar - no welding required (choose size above) Lightweight powder coated aluminum Longacre Part Number: 52-22553 Roll Bar Diameter Mount Clamp: 1.5"

Discovery Parts Seat Mounting Hardware Kit (4) 8x1.25 25mm Bolts (4) 8x1.25 16mm Bolts (4) 8x1.25 Locking Nuts (8) Washers Sparco Part Numbers: 50001 and 50002 - everything you need in one place!

Lifeline Zero 2020 FIA 3.0ltr Fire Marshal Mechanical System Designed for sedan racers, the Lifeline Zero 2020 Fire Marshall Fire System is mechanically actuated, has a 3.0 Liter capacity, two pull cables and 5 nozzles for coverage and FIA list 16 compliant, so you are legal for WRL, ChampCar, NASA, SRO, SCCA, PCA, BMWCCA, and more. Lifeline Zero 2020 FIA 3.0ltr Fire Marshal Mechanical System Details: Manufacturer: Lifeline Manufacturer part number: LL-106-001-011 Bottle material: Steel Lifeline Zero 2020 FIA 3.0ltr Fire Marshal Mechanical System Components: 1x ready to use, filled and certified Steel 3.0L Cylinder 1x 8mm Alloy Semi Rigid Tube 6m Length 1x Heat Proof Overbraid 6m 1x 2.0mtr/6ft Pull Cable Red T Handle 1x 4.0mtr/12ft Pull Cable Red T Handle 1x Zero 2020 Brackets & Straps 1x 8mm Bulkhead Fitting 5x Misting Nozzle 4x 8mm Equal T Connector The new Zero 2020 FIA 3ltr Fire Marshal Mechanical Fire Suppression System provides substantial coverage and performance from a revised lighter and smaller bottle. Now utilizing a water based ABF foam that delivers the fastest heat absorption and knock down capability on the market. Utilizing 3 of Lifeline superior misting nozzles for the engine bay and 2 for the cockpit allows for a lighter system overall and maximum protection of the driver. Lifeline Zero 2020 FIA 3.0ltr Fire Marshal Mechanical System Benefits: Smaller and lighter design than the previous Zero 2000 systems with increased levels of safety compared to competitors The fastest heat absorption and fire knock down capability available from a water based system 5 nozzle system for strategic coverage of the engine bay and cockpit reducing weight and complexity of the installation FIA Technical List 16 compliant Steel cylinder dimensions - 6.1in OD(155mm) x 13.5in Length Overall(342mm) at 11.5lbs(5.2kg) Covers a wide range of vehicles including Sports/GT cars, Formula/Prototype cars, and Rally cars Lifeline fire systems are pressurized canisters and can be only shipped ground

Longacre Battery Disconnect Switch w/ Alt Aluminum Panel Longacre Battery Disconnect Switch With Alternator Disconnect and Black Anodized Lightweight Aluminum Panel. Function and style come together in your racer. Longacre Battery Disconnect Switch w/ Alt Aluminum Panel Details: Manufacturer: Longacre Manufacturer part number: 45784 Manual battery disconnect switch with a bright red handle Easier to find in an emergency Prevents battery drain 175 amp continuous rating, 6-36 volt, 1000 peak Alternator circuit 20 amps Black Anodized Lightweight Aluminum panel included

Alpinestars ZX v4 Nomex Socks These nomex socks from Alpinestars' advanced ZX base layer series were developed with a compression design for enhanced performance. The ZX V4 socks use seamless technology with an updated pattern to create fewer pressure points making them more comfortable for wearing throughout long stints in the car. ALPINESTARS ZX V4 NOMEX SOCK CONSTRUCTION • Aramidic socks with elastane fire retardant fiber.• Gradual compression, sport design wraps around the muscles, tendons and ligaments in the foot, ankle and calf. This aids overall circulation and blood flow to the legs, as well as assists in combatting fatigue.• Certified to FIA 8856-2018 homologation standard.

Castrol SRF Racing Brake Fluid With 518º F Wet Boiling Point Castrol React SRF is a very high-performance brake fluid specifically developed for motorsports applications where extreme braking conditions are encountered. Castrol SRF has an exceptionally high wet boiling point of 518° F (256º C) along with a very respectable 590° F dry boiling point. Both exceed DOT 4 specifications. Castrol SRF Brake Fluid's unique silicon ester technology absorbs less water than conventional glycol ether fluids and prevents the fluid's high-temperature performance from deteriorating. Its wet boiling point of 518° F is vastly superior to the minimum requirement demanded by the current US DOT 4 specification. Its ability to withstand temperatures in excess of 590° F and superior resistance to the effects of absorbed water have established Castrol SRF Brake Fluid as the world's premier fluid for the hydraulic brakes used in all forms of motorsport and racing. Castrol SRF brake fluid can make a critical difference when using metallic brake pads with high thermal conductivity. Resistance to foaming makes it an excellent choice for use with ABS braking systems. Castrol React SRF Racing Brake Fluid is now packaged in easy-pour 1 liter plastic bottles. Castrol React SRF Racing Brake Fluid Details Manufacturer: Castrol Manufacturer part number: 12512 UPC: 079191005125 Size: 1 liter Service life: 18 months DOT Rating: DOT 4 Dry Boiling Point: 590° F (296º C) Wet Boiling Point: 518° F (256º C) Compatible with other DOT3/DOT4: Yes Size: 1 liter (33.8 fl. oz.) plastic bottles Development of Castrol React SRF Racing Brake Fluid Castrol React SRF evolved as a direct result of Castrol's ongoing Research and Development program for brake fluids which identified this silicon ester technology as providing considerable performance benefits when compared with conventional glycol ether borate ester fluids.Following exhaustive laboratory tests at Castrol's International Technology Centre in the UK, the final formulation for Castrol SRF was subjected to an extensive road-test program on the Gross Glockner and Stelvio passes high in the Austrian and Italian Alps. It then underwent an independent track test program conducted by a famous Formula One racing team. Their assessment was that "Castrol SRF is the best racing brake fluid we have ever used." Subsequently, Castrol SRF was offered to top-flight racing and rally teams throughout the world including most of the Formula One team, the all-conquering Jaguar and Mercedes -Benz sports car teams, and the Audi, Nissan, and Toyota rally teams. Enthusiastic recommendation by these experts soon created immense interest in Castrol SRF throughout the whole spectrum of national and international motorsport. Today, Castrol React SRF is regarded by the international motorsport community as being without equal and it is chosen not only by factory-supported teams but by private competitors throughout the world. The Solution To High-Temperature Vapor Lock All conventional brake fluids used in cars and motorcycles are hygroscopic, that is, they absorb water from their surroundings. Strange though it may seem, the flexible hoses incorporated in braking systems are permeable to water and in time enough, water can find its way into the system via the hoses and seriously affect the brake fluid's performance. This water reduces the boiling point of the fluid (i.e., it lowers the temperature at which gas bubbles begin to form). When these bubbles form, they turn a virtually incompressible liquid into a mixture of gas and liquid which can be compressed quite considerably, thus severely reducing the efficiency of the brakes. In this situation, a driver finds that the brakes feel spongy. Brake-pedal travel will increase and it may be necessary to 'pump' the pedal to get the brakes to function effectively. However, when the brake fluid reaches a temperature at which the water in the fluid causes gas to be produced, which is equal to the volume swept by the piston in the master-cylinder, vapor-lock occurs and the brakes become inoperative. When this happens, the first indication the driver has that something is wrong is when he applies the brakes. The pedal goes down to the floor and the car carries on at undiminished, possibly fatal speed.The silicon ester technology in Castrol React SRF addresses this problem in two ways. Firstly, Castrol SRF is less hygroscopic than conventional brake fluids - it absorbs less water in a given time. Secondly, unlike conventional glycol ether fluids, Castrol SRF reacts chemically with the absorbed water to reduce its adverse effects, thus preventing the fluid's high-temperature performance and safety margins from deteriorating as rapidly as they would otherwise do.Castrol React SRF exceeds the US Federal Standards FMVSS 116 DOT 3 and DOT 4, ISO 4925, JIS K2233, and current SAE J1703 and is miscible with all conventional brake fluids conforming to these standards. However, mixing Castrol React SRF and conventional brake fluids will reduce the benefits of Castrol React SRF. It is strongly recommended that conventional brake fluid be drained from the system before flushing and refilling with Castrol React SRF.

Longacre Helmet Hook - 1.5" Longacre Helmet Hooks keep your race helmet off the floor and safe from scratches and damage. The Longacre 22572 Helmet Hook fits perfectly on all 1.5" (1 1/2") roll bars and will last many years with its durable anodized finish. Longacre 1 1/2" Helmet Hook Details: Manufacturer: Longacre Manufacturer Part Number: 22572 Material: CNC Machined Billet Aluminum Finished: Black anodized Mount Diameter: 1.5" Protect your helmet Bolts onto your roll bar - no welding Lightweight billet aluminum - black anodized

AiM K8/K15 Keypad  Button Inserts To order the specific insert you need, write the insert name and part number in the space provided above. These AiM keypad button inserts fit neatly into the buttons on your AiM K8 or K15 CAN keypad. They allow each button's backlight to illuminate a word or symbol that represents that button's function, putting easy keypad function recall at your fingertips. These are a required add-on to operate each button, and are sold individually. Choose among 72 different inserts to create different configurations with the same K8 or K15 keypad based on your needs. AiM K8/K15 Keypad Button Insert Details Manufacturer: AiM Sports Manufacturer part number: LVT60007 Quantity: sold individually Write insert name and part number in the space provided above AiM K8 CAN Keypad is sold separately.

HJC H10 SA2020 RACING HELMET   The HJC H10 SA2020 Helmet is the ideal helmet for all types of racing. HJC H10 has a comfortable Fire Resistant Moisture-wicking Comfort-Carbon interior and Advanced Ventilation System to keep you cool and comfortable. The HJC H10 SA2020 Helmet is the ONLY affordable alternative. Turn Heads While You Turn Corners: One Helmet to Rule the Tracks: Whether you're into drag racing, track days, or just pretending your sedan is a race car while driving to the grocery store (no judgment here), the HJC H10 SA2020 is your trusty sidekick. Perfectly tailored for all types of racing. The Cozy Factor: Sweat in the gym, not on the race track! With the Fire Resistant Moisture-wicking Comfort-Carbon interior, your head will feel like it's getting a hug from a cool, comforting cloud. A very fast-moving cloud, that is. Chill Out, Hotshot: The Advanced Ventilation System ensures your hair (or, you know, your scalp) feels that racetrack breeze, keeping you cool even when you're burning up the asphalt. High-Quality, Low Price: Think you need to spend big to race big? Think again! The HJC H10 SA2020 helmet is giving all those pricey helmets a run for their money. It's the ONLY affordable alternative that doesn't compromise on quality. And who doesn't love a good deal? HJC H10 AUTO RACING HELMET FEATURES:  Snell SA2020 approved Advanced Fiberglass Composite Weave shell provides light weight, superior fit and comfort using advanced CAD technology ACS Advanced Channeling System: front-to-back airflow flushes heat and humidity up and out Optional shields available: Amber, Dark Smoke, Dark Blue, and Black Chrome Optional clear spoiler is available Anti-fog shield with tear-off posts Pre-installed M6 terminals for head and neck restraints Improved front ventilation Sizes XS - XXL HJC H10 COMPOSITE AUTO RACING HELMET FREQUENTLY ASKED QUESTIONS (FAQ): Remember that safety is paramount in auto racing, and choosing the right helmet and maintaining it properly is essential for your protection on the track. Always consult with the professionals at Discovery Parts and refer to the manufacturer's guidelines for specific questions about your racing helmet. Why do I need a racing helmet? Auto racing helmets are designed to protect drivers from head injuries and fire during high-speed races and crashes. They are a crucial safety component in motorsports. How do I choose the right size helmet? You should measure your head's circumference using a flexible tape measure, then refer to the manufacturer's sizing chart to select the appropriate size helmet. Please review our blog posting on how to properly fit your new auto racing helmet from Discovery Parts. What safety standards should I look for in a racing helmet? Look for helmets that meet safety standards like Snell and FIA depending on your racing discipline. These standards ensure the helmet's safety and quality. DOT helmets are designed for street use and not for racing and track use. What's the difference between full-face and open-face, and helmets? Full-face helmets provide the most protection with a complete face shield, while open-face helmets cover the top and sides of the head. Can I use a motorcycle helmet for auto racing? No, motorcycle helmets do not provide the same level of protection as auto racing helmets, as they are designed for different purposes. It's recommended to use a helmet specifically designed for auto racing which includes fire protection in addition to impact protection. How often should I replace my auto racing helmet? Auto racing helmets should be replaced every 5-10 years, depending on the manufacturer's recommendations and usage. If the helmet is involved in a crash, it should be replaced immediately. Are expensive racing helmets safer than budget ones? Safety standards dictate the minimum safety requirements, so even budget-friendly helmets can offer protection. However it’s important to consider how lower-priced helmets are meeting the required testing standards. More expensive helmets are lighter, smaller, are constructed of superior materials, and often come with additional features then less expensive helmets. How do I maintain and clean my racing helmet? Follow the manufacturer's instructions for cleaning and maintenance. You should clean the exterior, interior and shield with the Molecule Helmet Care Kit. Do I need to wear a balaclava under my racing helmet? Balaclavas are typically not required for Driver's Education events, however they make wearing a helmet much, much more comfortable. Balaclavas will provide fire protection (if fire rated), help keep your helmet lining clean and order free by absorbing the majority of sweat while using it, and additionally balaclavas make putting your helmet on and taking it off by protecting your ears and keeping from from folding over when you helmet is worn. Discovery Parts recommends balaclavas from Alpinestars, OMP, Sabelt, Sparco, and Stand21. If you are entering sanctioned auto racing events, balaclavas will be required for fire protection. Is the SNELL SA Rating important? The Snell SA2020 certification is a safety standard established by the Snell Memorial Foundation for auto racing helmets. It sets the criteria and requirements that helmets must meet to be considered safe and suitable for use in motorsport events. Snell SA2020 certification is highly regarded in the motorsports industry and is often required or recommended by racing organizations and events. It signifies that a helmet has passed rigorous testing to provide maximum safety for drivers in various motorsport disciplines, including road racing, NASCAR, Formula 1, drag racing, and more. It's essential for drivers to check the specific safety standards required by the racing organizations they participate in to ensure compliance. Is the FIA helmet certification important? Yes, FIA (Fédération Internationale de l'Automobile) certification is crucial for auto racing helmets, especially in the context of international motorsport events and many national and regional racing series in the USA. The FIA 8859-2015 standard is commonly associated with racing helmets used in various motorsport disciplines. Helmets certified to FIA 8859-2015 met the safety requirements set by the FIA and were widely accepted in many racing series Which helmet certification is the most stringent and the hardest to meet? The FIA 8860-2018 certification is considered the most stringent and advanced helmet certifications available for auto racing helmets, and it is often associated with top-tier motorsport categories like Formula 1. It's important to note that the FIA 8860-2018 helmets offer a high level of protection and their use is mandatory in many racing series. Drivers should always check the regulations of the racing series they intend to participate in to ensure compliance with helmet certification standards. Can I wear glasses with my helmet? Most helmets have provisions for wearing glasses or goggles, but check the design to be sure. Most manufacturers feature helmet models with wider eye ports to better accommodate eye glasses. Are carbon fiber helmets better? Carbon fiber helmets are lightweight and strong, a top choice for racers. But remember, certification matters most. Can I use a used helmet for racing? It's best to buy a new helmet. Used helmets may have unseen damage or be out of date on safety standards. Can I buy replacement parts for my helmet, like visors or padding? Many manufacturers offer replacement parts, including visors and padding, to extend your helmet's lifespan. How can I prevent helmet fogging during races? Anti-fog sprays and inserts are available to help keep your visor clear during races. What's the importance of proper helmet ventilation? Proper ventilation helps keep you cool and comfortable during races, reducing the risk of heat exhaustion. How do I store my helmet between races? Keep it in a cool, dry place away from direct sunlight and chemicals in a bag designed to store your auto racing helmet, like the Discovery Parts Evo Helmet Bag. Where can I buy a certified racing helmet? You should only buy from a professional authorized dealer who has sold thousands of helmets. You can find all the best brands at Discovery Parts online at www.discoveryparts.com or visit our retail store at Atlanta Motorsports park or at one of the hundreds of race and track day events we attend and support. Remember, safety should always come first in auto racing. Choose a certified helmet that meets the necessary standards to protect yourself on the track.

Sparco Pit Stop Crew Shoes The Sparco Pit Stop shoe was designed specifically for pit crew use but it can also be used for racing where a durable and thicker sole is preferred such as off-road. The Pit Stop shoe is SFI approved for racing or “over the wall” crew use. The Pit Stop has a suede upper with a perforated tongue and heel for added breathability and it has leather panels on the toe box and heel for extra durability. The anti-static, fuel- and oil-resistant rubber sole was designed for maximum grip, with a toe cap designed to protect the toe area when in the kneeling position. Internal lace system to help protect from snagging. The Pit Stop has an extra padded collar area with a Velcro closure which gives extra support. The internal foot bed has a special cushioned insole that gives maximum comfort. The Sparco Pit Stop shoe is available in black in US sizes 7-1/2 to 15. SFI homologated. SPARCO PIT STOP CREW SHOE TECHNOLOGY Padded collar and adjustable strap Pre-shaped anatomic insole Perforated breathable upper Anti-static, fuel- and oil-resistant sole Internal lacing system SFI approved