New products

AiM Solo2 Replacement Mount Bracket Use this AiM Solo2/Solo2 DL Replacement Mount Plate Kit to mount your AiM Solo2/Solo2 DL into different vehicles easily. The AiM Solo Replacement Mount Plate includes all hardware and is a genuine AiM product. AiM Solo2 Replacement Mount Bracket Details Manufacturer: AiM Manufacturer part number: X47KPFSOLO2R0 Fits AiM Solo2: Yes Fits AiM Solo2 DL: Yes Fits AiM Solo Original: No Fits AiM Solo DL Original: No Hardware included: Yes Color: Black The magnets on the back of the AiM Solo2 lap timer makes it easy to move from car to car, but once you're in the second car, you need an extra mounting plate for the magnets to stick to. This is the same steel mounting plate as included with the Solo2 and Solo2 DL. It has countersunk holes for mounting screws and tabs to keep the Solo from sliding off under high shock loads. Includes two (2) countersunk 4 x 0.7mm socket-head screws (to fit the countersunk holes in the plate) and two (2) 3 x 0.5mm socket-head cap screws with washers (to fit the threaded inserts in the back of the Solo2).

AiM MXL 3.5mm Download Cable AiM MXL Download Cable to download your data from your MXL Dash to your laptop. The AiM MXL Download Cable & CD Kit lets you easily transfer your AiM Data to your Laptop. AiM MXL 3.5mm Download Cable Details: Manufacturer: AiM Manufacturer part number: X10MXLPC01 Manufacturer alternate part number: MC-009-MXL End 1: 3.5mm male End 2: USB AiM MXL USB download cable has a male 1/8" (3.5mm) stereo plug to connect to most MXL series dashes (except those made in 2004 and those supplied in Seat Leon Cup or Formula Renault cars). Note that all MXL series dashes can also use the Memory Key Download Tool (Part No. MC-315) rather than a USB cord for easy data transfer. MXL Pista dashes also have the option to plug the MyChron3 Plus Download Cable (Part No. MC-009-Plus) into the sensor harness if the side port is blocked. Each download cable includes access to free Race Studio software download. AiM Race Studio 2 Software lets you analyze the data from your MXL Pista or Pro dash in an organized and highly professional way. Your data can be analyzed in several different styles thanks to graphs, histograms, comparisons between lap data and test data, and time comparison tables. Many calculation features are available like math channels and power and torque calculators. Race Studio 2 software is also required for setting up any MXL dash. Compatible with Windows 10, Vista, 98 SE, 2000, ME, XP, 7, and 8 and functions in several different languages: English, Italian, German, French, Spanish, Dutch, Portugese, Finnish, and Japanese. This is an excellent spares kit item as other racers borrow it and "forget" to return it. Be prepared and get faster.

AiM Magnetic Wheel Speed Sensor - 712 Lead The AiM Magnetic Wheel Speed Sensor with a 712 lead is designed to deliver precise wheel speed measurements for data acquisition systems. Built with durability in mind, this sensor is ideal for motorsports applications where accuracy and reliability are critical. Its magnetic pickup design ensures dependable readings even in demanding track environments. Reliable Wheel Speed Data for Accurate Analysis This AiM sensor connects seamlessly with AiM data loggers and dashes, providing accurate wheel speed information crucial for lap timing, telemetry, and performance analysis. Whether you're fine-tuning your setup or analyzing post-session data, this sensor is a must-have for extracting maximum performance from your vehicle. Features: • Precision magnetic wheel speed pickup compatible with AiM systems• 712 lead connector for secure and reliable integration• Rugged motorsport-grade construction for track use• Provides critical data for telemetry and driver coaching• Easy installation and plug-and-play connectivity with AiM devices AiM Magnetic Wheel Speed Sensor - 712 Lead FAQs: What AiM devices is this sensor compatible with? This sensor works with AiM loggers, dashes, and data systems that support a magnetic wheel speed input with a 712 lead connector. How is the AiM Magnetic Wheel Speed Sensor installed? It mounts near a wheel or axle with a magnetic target. It connects directly to your AiM system using the included 712 lead connector. Is this sensor suitable for all motorsports applications? Yes, it is built for both amateur and professional racing use, including cars, bikes, and karting setups. Why is wheel speed data important? Accurate wheel speed information is critical for traction control tuning, lap analysis, and optimizing performance during data review. Upgrade your AiM data system with the precision and reliability of the AiM Magnetic Wheel Speed Sensor - 712 Lead. Order today from Discovery Parts and get the performance data you need to dominate at the track!

AiM Brake Pedal Position Sensor, Linear Travel Pot (Auto) The AiM linear short stroke (10mm) displacement potentiometer is most popular ideal for measuring brake pedal movement. A pedal travel sensor such as this can be simpler to install in many vehicles than plumbing a pressure sensor in the brake line. Normally mounted in front of the brake pedal (between the driver and the pedal) so the sensor is depressed when the brakes are off. This will reduce the likelihood of sensor damage or interference with pedal travel in the event of brake fade. The sensor should be mounted close to the pedal pivot, and at an angle that minimizes side loading on the plunger. The compact sensor body measures just 3/4" (19mm) OD x 1 3/8" (35mm) long overall (less plunger). Two 1/4" (6mm) mounting holes are located 1.34" (34mm) center-to-center. This sensor has a 200mm (7 3/4") long cable with the 719 (four-pin plastic push-on type) connector. Use a My Chron 719-719 Patch Cable (Part No. MC-211) to connect to an AiM MXL Pista, MXL Pro, MXL2, MXG, MXS, or MyChron3 Auto dash (except XG-Log). XG-Log and EVO4 require a 712-719 Patch Cable (Part No. MC-210) for connection. AiM Brake Pedal Position Sensor, Linear Travel Pot (Auto) Details: Manufacturer: AiM Manufacturer part number: X05SNLPRSO Alternate part number: AIM-MC-321 Range: 10mm (.375 Inch) Electrical Connection Type: 719 (4 pin push-on style) Mounting eyelet: 6mm (1/4") on 34mm (1.34") bolt centers

AiM Solo2 DL CAN/RS232 Wiring Harness If you're moving your AiM Solo2 DL from one car to another and need a harness for power and data input, this is your cable. If you are putting a Solo2 DL into an older vehicle and need a power supply cable, use this and use only the "+" and "-" wires (fold back the CAN inputs). The AiM V02569050 harness connects your Solo2 DL to your ECU via your vehicle's CAN or RS232 bus wiring. One end has a 7-pin 712 (screw-in) connector to fit the Solo2 DL, and the other has six non-terminated wires (CAN+, CAN-, RS232RX, RS232TX, Power, and Ground). Does not fit the original AiM Solo or Solo DL. AiM Solo2 DL CAN/RS232 Wiring Harness (New Solo 2 DL) Details Manufacturer: AiM Sports Manufacturer part number: V02589050 Fits Solo DL: No Fits Solo2 DL: Yes Fits Solo Base Model: No Fits Solo2 Base Model: No Pins on AiM Solo2 DL Side: 7 Pin Thread on connector Vehicle Chassis Ends: six non-terminated wires Chassis End Wiring Break Out: Red=+12 VDC, Black=Ground, Blue=ECU RS232TX, Blue=ECU RS232 CAN-, Gray ECU RS232 RX, Gray CAN+ AiM Solo2 DL CAN/RS232 Wiring Harness Wiring Code Red: +9 to +15 VDC Black: Ground Grey: CAN+ Blue1: CAN- Gray: ECU RS232 RX Blue1: ECU RS232TX 1 Note: both blue wires are the same color, but each wire has an identifier tag stating the connection type.

AiM CAN 7-Pin to OBD-II (K-Line Connector) Cable for Solo2 DL AiM Solo2 DL to OBDII Port Connection Cable On Your Car For Easy Addition of RPM and other vehicle data. One end has the K-Line (OBDII) plug to fit the diagnostic port, and the other end has a seven-pin 712 (screw-in) connector for the Solo2 DL. OBDII is also known as K-Line. This is the same cable supplied with the original AiM Solo2 DL for OBDII connection. Does not fit the original Solo DL. AiM CAN 7-Pin to OBDII Cable for Solo2 DL Details Manufacturer: AiM Manufacturer part number: V02589040 End 1: AiM 7 Pin 712 (thread on) End 2: OBDII (K-Line) Fits AiM Solo: No Fits AiM Solo DL: No Fits AiM Solo2: No Fits AiM Solo2 DL: Yes

AiM Solo2 DL Vehicle Power Wiring Harness Now you can power your AiM Solo2 and Solo2 DL for your entire endurance race without the need to charge the battery. The power cable that comes with the AiM Solo2 in the package is set up for a cigarette lighter connection, but this is a hard wire connection for true race cars. This harness connects your AiM Solo2 to your vehicle's fuse box wiring. One end has a 5-pin 712 (screw-in) connector to fit the Solo, and the other has two non-terminated wires (Power and Ground). AiM Solo2 DL Vehicle Power Wiring Harness Details Manufacturer: AiM Sports Manufacturer part number: V02589010 Fits Solo DL: No Fits Solo2 DL: Yes Fits Solo Base Model: No Fits Solo2 Base Model: Yes Pins on AiM Solo Side: 5-pin thread-on connector Vehicle Chassis Ends: two non-terminated wires for power and ground If you are putting an AiM Solo2 DL into an older vehicle and need a direct to battery/fuse box power supply cable, use this harness for a neat, easy installation.

AiM 22 Pin Aux Harness Straight Connector EVO 5 This straight harness plugs into the 22-pin connector on the AiM logger. Several of the advanced functions rely on this harness, which is not included with the standard kit. If you would like to add 4 more analog channels, 2 more digital connections and connect easily to your RS232 or CAN-2 ECU, the AiM V02586030 is your next best upgrade. The AiM EVO5 Logger 22 Pin Auxiliary Harness will provide access to the following functions: Analog sensor channels 5, 6, 7, 8 Digital wheel speed sensor inputs 2, 3, 4 Digital 12v outputs 1, 2 RS232 ECU connection Can-2 ECU connection The factory harness that comes with the AiM Dash/Logger allows only 4 inputs. If you would like more inputs then this is your harness.For use with AiM EVO5 only. Not compatible with MXG, MXS, MXM, MXL Pro / MXL Pro05 or EVO3. AiM EVO5 Logger 22 Pin Auxiliary Harness Details: Manufacturer: AiM Manufacturer part number: V02586030 Harness Angle: Straight AiM EVO5 Logger 22 Pin Auxiliary Harness Primary use: Adding analog sensors greater than 4. Your factory harness will allow up to 4 analog channels (sensors), this may be (1) Water Temperature, (2) Oil Temperature, (3) Oil Pressure and (4) Brake Pressure. Using the AiM 22 Pin Auxiliary harness you now can add four more analog channels (sensors) like (5) Steering Angle, (6) Throttle Position, (7) Gear Box Temperature, and (8) Differential Temp. Another way we see this cable used is independent shock travel (all corners) or engine oil temperature pre-cooler and oil temperature post-cooler.

AiM Cable for Reverse or Side Mirror Cameras The AIM V02573410 Y-cable is intended specifically to connect two AiM Analog Rear Cameras to your AiM "1.2" version MX-Series dash MXS 1.2/1.3, MXP, or MXG 1.2/1.3 including Strada versions. AiM Cable for Reverse or Side Mirror Cameras Details: Manufacturer: AiM Manufacturer part number: V02566300 This long cable features two length different leads from your dash, one measuring 6 meters (19 feet 8 inches) from the dash and the other camera 4 meters (13 feet). The most common applications are using one camera as a backup camera and another as a rearview mirror or front-facing curb view camera, or for both side mirrors.

AiM MXL to MXG, MXS, MXL2 Adapter Harness For use when you upgrade from an AiM MXL Pista or Strada to the modern MXS, MXG, MXP or MXL2 dash. You could remove the MXL harness from the chassis and replace it with the supplied harness that comes with the MXS, MXG or MXL2 or use this adapter harness to make installation easy. AiM AiM MXL to MXG, MXS, MXL2 Adapter Harness Details Manufacturer: AiM Manufacturer part number: V02573090 Connector 1: 22 pin Connector 2: 37 pin 2 Speed inputs 2-4 3 CAN inputs CAN/K-line ECU wiring 12VDC+/- This special harness has one 22-pin and one 37-pin Deutsch connector to plug into the back of the MXL 2 or MXG dash. The other end of the harness has female connectors designed to accept your current MXL wiring harness. You won't have to cut wires, re-run cables, or even unplug your sensors! Simply disconnect the two rectangular AMP connectors from the back of your MXL and plug them into this harness. Your lap timing receiver and anything plugged into the CAN port can be connected to the harness as well. This harness also provides connections for speed inputs 2-4, 3 CAN inputs, and CAN/K-line ECU wiring, for full access to all of the advanced features of the MXL 2 and MXG/MXS. Not compatible with MXL Pro or MXL Pro05 wiring harnesses. If you are unfamiliar with Bend Radius, Wikipedia saves us: Bend radius, which is measured to the inside curvature, is the minimum radius one can bend a pipe, tube, sheet, cable or hose without kinking it, damaging it, or shortening its life. The smaller the bend radius, the greater is the material flexibility (as the radius of curvature decreases, the curvature increases).

AiM SmartyCam GP HD 2.2 Link Serial Cable - 2 Meter AiM AiM SmartyCam GP HD 2.2 Replacement Serial Cable V02566980 goes from the AiM SmartyCam Processor to the lipstick camera. Working with both 67 and 84 camera lens, the AiM V02566980 replacement cable in 2 meter length easily threads on to the camera SMA connection (small thread-on collar with single center conductor) and the processor SMA connection. AiM SmartyCam GP HD 2.2 Link Serial Cable - 2 Meter Details: Manufacturer: AiM Manufacturer part number: V02566980 Fits AiM SmartyCam GP HD 2.2: Yes Fits AiM SmartyCam GP HD 2.1: No Length: 2 Meters End 1: SMA thread on End 2: SMA Thread on Why would you need this cable? The most common issue is when the wire ties used to secure the cable to the cage are over-tightened to where the outer shielding is crushed into the center conductor. Also we have seen extra cable looped in a circle and wire tied around itself to "clean up the area". This cable requires a minimum 8D bend radius. If you are unfamiliar with Bend Radius, Wikipedia saves us: Bend radius, which is measured to the inside curvature, is the minimum radius one can bend a pipe, tube, sheet, cable or hose without kinking it, damaging it, or shortening its life. The smaller the bend radius, the greater is the material flexibility (as the radius of curvature decreases, the curvature increases).

The original AiM SmartyCam (2009-2013) and new SmartyCam HD V 2 / SmartyCam HD GP all have an internal microphone for great racing sound, but it does limit your sound options. This special cable has a 3.5mm mono jack for an external microphone. The input from this jack automatically mixes with the sound from the SmartyCam internal microphone. SmartyCam Microphone Cable Fitment Original SmartyCam (2009-13, with the viewing screen on top) Exp port to AiM dash/logger or SMC Bridge SmartyCam HD "Rev 2" or later (2015+) Exp port to AiM dash/logger or SMC Bridge SmartyCam HD GP "Rev 2.1" or earlier (to 2018) Exp port to AiM dash/logger or SMC Bridge AiM SmartyCam CAN Cable with Microphone Jack, 4M Details: Manufacturer: AiM Manufacturer part number: V02566300 Alternate part number: MC-552 Dash, Solo DL, Solo 2 DL End: 5 Pin Male 712 SmartyCam End: 7 Pin Male 712 Microphone jack: 3.5mm female mono Cable length: 4M (13 feet) Length from 7 pin 712 to "Y" Adapter: 50mm Length from Y adapter to 5 pin 712" 4 Meter Length from Y adapter to microphone 3.5mm female jack: 900mm The 7-pin 712-type connector plugs into the CAN port on the original AiM SmartyCam. A 5-pin connector on the other end connects your SmartyCam to your AiM data logger, SMC Bridge, etc. Measures 4M (13 feet) long. 3.5mm mono microphone jack is attached to the lead. This cable is not compatible with the SmartyCam HD, which has a 5-pin plug.

AiM SmartyCam CAN Cable with In-Line External Microphone, 4M Add An External Microphone to your AiM Solo DL with SmartyCam Orig or SmartyCam HD V.2 with this AiM connection cable. This special CAN cable plugs into the CAN port on the original AiM SmartyCam (2009-2013) and the HD Version 2 to connect to your AiM data logger, SMC Bridge, etc. An external microphone is incorporated into the cable. The input from this microphone automatically mixes with the sound from the SmartyCam internal microphone for enhanced sound. Measures 4M (13 feet) long. This CAN cable has a 7-pin 712 (screw-in) connector on the camera end. It is not compatible with the SmartyCam HD (Orig Version 1), which has a 5-pin plug. SmartyCam Microphone Cable Fitment Fits Solo DL & SmartyCam Orig (Grey Unit) Fits Solo DL & SmartyCam HD Rev.2 (Black Box w/ Red Ring Around Lens) Fits Solo DL & SmartyCam HD Rev.2 Plus (Black Box w/ Black Ring Around Lens) Camera End: 7-Pin 712 Screw-in connector Can End: 5-Pin 712 Screw-in connector AiM SmartyCam CAN Cable with In-Line External Microphone, 4 Meter Details: Manufacturer: AiM Manufacturer part number: V02566240 Length- 4 Meters (13 Feet)

AiM 5 Pin 712 to 7 Pin 712 Cable Connects SmartyCam HD 2.1 to Solo DL, MXS, MXG, MXL2, Etc. The AiM V02566070 CAN cables have a male 5-pin 712 (screw-in) connector and a 7-pin 712 (screw-in) connector to connect the AiM SmartyCam HD 2.1 (version 2.1 black box looking camera) to your Solo DL, MXS, MXG, MXL2 in the shorter 2 meter length. This cable also is used to connect your AiM SmartyCam HD (version 1) to your AiM logger or SMC Bridge. AiM 5 Pin 712 to 5 Pin 712 Cable Details Manufacturer: AiM Sports Manufacturer part number: V02566070 Alternate part number: AIM-MC-267 SmartyCam HD 2.1 to Solo DL, Mychron 5, MXS, MXP, MXG, MXL2 sync cable Included with all SmartyCam HD kits Length: 2 meters (6.6 feet) Note: Not compatible with the original SmartyCam (gray unit with the viewing screen on top) or the later SmartyCam HD "Rev 1". The version 1 can be identified by a 7/8" diameter lens with either a 67º or 87º field-of-view and the viewfinder flush with the front housing. The later SmartyCam HD Rev 2 had a larger 1 3/8" OD lens with either a 60º or 120º degree field-of-view and a cover over the front viewfinder held on by eight screws.

MyChron5 & 4 2T Y-Cable, CHT & EGT - 5 meter One of the most common uses of this cable is to use an under the spark plug cylinder head temperature (CHT) and an exhaust gas temperature (EGT). We use this on a Yamaha KT100, LO206, Animal or clone motor to record both CHT & EGT as our two temperature inputs. AiM Y-Cable is designed for the MyChron5 2T kart dash.This Y-Cable is designed for the MyChron5 2T and MyChron4 2T kart dash. It has a 712 7-pin male connector for the dash, and two K-type (2-pin flat yellow) female connectors to accept K-type thermocouples. Manufacturer: AiM Kart Only: Yes MyChron5 2T: Yes MyChron4 2T: Yes Cable End 1: 7-pin 712 screw on (dash) Cable End 2: K-Type (2 pin flat yellow female - egt or CHT) Cable End 3: K-Type (2 pin flat yellow female - egt or CHT) DiscoveryParts part number: V025571105M

AiM MyChron4/5/5S 2T Y-Cable This AiM Sports Y-Cable is designed for the MyChron5 and MyChron 5S 2T kart dashes with two temperature control capabilities. One end of the AiM Y-Cable has one Binder 712 seven-pin male (screw-in) terminal to connect to your MyChron dash. The other end has one K-type (two-pin flat yellow) female connector to accept a K-type thermocouple, and one Binder 712 four-pin female (push-in) connector for a thermoresistor temperature sensor. AiM MYCHRON4/5/5S Y-CABLE DETAILS Manufacturer: AiM Sports Manufacturer part no: V02557110 Karting only: yes MyChron end: 7-pin Binder 712 male (screw-in) Sensor end 1: 4-pin Binder 712 female (push-in) Sensor end 2: K-Type 2 pin flat yellow female