New products

Stilo Helmets ST5 FN ZERO Ultra 8860-2018 ABP Carbon Helmet FIA 8860 Certification Valid Thru 2032 for the ST5 N Zero 8860 ABP Carbon Fiber Helmet Stilo's Most Advanced Auto Racing Helmet The ST5 FN Ultralight helmet was designed in conjunction with F1 driver Valtteri Bottas. This helmet takes our Zero class to the next level, by adding extra ventilation holes and lightening every aspect of the helmet, this helmet takes claim to the lightest 8860 ABP helmet on the market. With top safety in mind this rating includes an ABP rating.  The Advanced Ballistic Protection (ABP) features reinforced areas above the shield opening, which is 10mm lower and narrower than non-ABP models. In short, this is the highest specification helmet ever developed. Ultra Light Weight But Heavy On Features The Stilo ST5 FN ZERO Ultra 8860-2018 ABP is the lightest-weight carbon fiber racing helmet on the market. While it lacks the integrated side ports of the Stilo Helmets ST5 GT 8860-2018 carbon helmet, it can still be outfitted with top forced air and a helmet eject system. The innovative design incorporates mounting and routing for these options at the time of manufacture, so integration is sleek and seamless with nothing hanging down or otherwise getting in the way. When not in use, you don't even know these features are there. Looking for increased visibility? The Stilo Helmets ST5 FN ZERO 8860-2018 has a taller, lower-set eye port, giving you better visibility while not compromising safety. Stilo Shields use a center pinch-clip to make opening and closing easy, even while wearing Nomex racing gloves. Stilo ST5 FN ZERO 8860-2018 ABP Carbon Fiber Helmet Details: FIA 8860-2018 ABP certified Small shell weight: 2.1 lbs (930g) up to size L (59) Large shell weight: 2.7 lbs (1230g) up to size 3XL (64) Includes standard HANS post anchors Includes Stilo Helmet and HANS Bag Sizing from XS through 3XL All Stilo ST5 shields are compatible with this helmet Eight top ventilation holes (can be used with Stilo ST5 Helmet Top Air System sold separately.) Re-designed cheek pads are more contoured and comfortable than previous Stilo helmets Stilo ZERO shells are the lightest FIA 8860-2018 ABP helmets available For the GT version of this helmet (with integrated side ports), please see the Stilo Helmets ST5 GT ZERO 8860-2018 Carbon Fiber Helmet. This helmet will require a signature for delivery.

Stilo Helmets ST5 FN 8860-2018 FIA 8860 Certification Valid to 2034 for this ST5 FN 8860 Carbon Fiber helmet The Stilo Helmets ST5 FN 8860-2018 carbon fiber helmet was designed for professional racers needing to satisfy the latest FIA 8860-2018 regulation. It's also the helmet of choice for drivers who won't compromise their safety, no matter where they're racing. The Stilo ST5 FN 8860-2018 is among the lightest carbon fiber racing helmets on the market. While it lacks the side ports of the Stilo ST5 GT 8860-2018 Carbon Fiber Helmet, it can still be outfitted with electronics, top forced air, and a helmet eject system. Thanks to an innovative design incorporating mounting and routing for these options, integration is sleek and seamless with nothing protruding, hanging down, or otherwise getting in the way. When not in use, you don't even know they're there. Stilo Helmets ST5 FN 8860-2018 Note on Sizing We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. Stilo Helmets ST5 FN 8860-2018 Details: FIA 8860-2018 certification Includes Stilo HANS posts Significantly lighter than previous Stilo helmets Sizing from 54cm-64cm Stilo ST5 shields are interchangeable across all ST5 helmets Eight top ventilation holes  Re-designed cheek pads are more contoured and comfortable than previous Stilo helmets Made from 100% medium-tensile carbon Weight (+/-30 g): Small shell 1200g (2.4 lbs) Large shell 1320g (2.7 lbs) If you want the absolute lightest FIA 8860-2018 helmet on the market, check out the amazing Stilo Helmets ST5 FN ZERO 8860-2018 ABP Carbon Helmet.

AiM Sports MyChron External Power Cable If you're not powering your AiM MyChron by connecting it to your kart, you'll need this external power cable in order to provide enough juice for your MyChron. Installation is quick and easy. Two meters (6.6 feet) in length. Note: this cables typically takes 3 to 5 business days to ship.

CMS Performance Sub Strap + Lap Belt Mount for Porsche This Mount Fits All Variants of the Following Cars: Porsche 911 (1997+) Porsche Boxster (1997+) Porsche Cayman (2006+) The Best Way to Mount Harness Lap and Sub Belts in Your Porsche The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Porsche seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original Porsche mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap Mount for Corvette C6 This Mount Fits All Variants of the Following Cars: Chevrolet Corvette C6 (All) The Best Way to Mount Harness Lap and Sub Belts in Your C6 Corvette The CMS Performance Sub Strap Mount is designed to be installed and used with your factory seats, giving you strong, secure mounting points for racing harness sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap Mount provides an extremely strong structure to which you can wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap Mount Details Manufacturer: CMS Performance Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap Mount for Corvette C7 This Mount Fits All Variants of the Following Cars: Chevrolet Corvette C7 (All) The Best Way to Mount Harness Lap and Sub Belts in Your C7 Corvette The CMS Performance Sub Strap Mount is designed to be installed and used with your factory seats, giving you strong, secure mounting points for racing harness sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap Mount provides an extremely strong structure to which you can wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap Mount Details Manufacturer: CMS Performance Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for GR Supra Fits the Following Vehicles: Toyota GR Supra, A90/91 (2020+) Toyota GR86 (2022+) Subaru BRZ, ZN8 (2022+) The Best Way to Mount Harness Lap and Sub Belts in Your Toyota/Subaru The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory seats, giving you strong, secure mounting points for your racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-001 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for Toyota GR Corolla Fits the Following Vehicles: Toyota GR Corolla (2023+) The Best Way to Mount Harness Lap and Sub Belts in Your GR86/BRZ The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Toyota GR seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original seat mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-005 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

Sparco Stealth Rear Spoiler The Sparco Stealth Rear Spoiler is a professional-grade aerodynamic upgrade engineered to improve helmet balance, airflow, and high-speed stability. Designed for Sparco  Stealth RF helmets, this spoiler helps reduce drag and lift while enhancing downforce—keeping your head steady and focused during long, high-speed runs. Optimized Downforce and Aerodynamic Control Built from lightweight, high-strength polymer, the Sparco Stealth Rear Spoiler integrates perfectly with the helmet’s rear contour for a factory-fit appearance. Developed through aerodynamic testing, this spoiler channels airflow cleanly over the helmet to minimize turbulence and improve performance under racing conditions. Features • Precision-fit for Sparco  Stealth RF series helmets• Improves aerodynamic efficiency and stability• Reduces drag and lift at high speeds• Lightweight and durable clear polymer construction• Wind tunnel tested for maximum balance• Includes adhesive backing for easy, no-drill installation• OEM Sparco accessory for factory-quality integration Sparco Stealth Rear Spoiler FAQs: Which helmets does the rear spoiler fit? The Sparco Stealth Rear Spoiler is specifically designed for the Sparco  Stealth RF helmet lineup and integrates perfectly with its aerodynamic shell shape. How does the rear spoiler improve performance? The spoiler reduces turbulence and increases rear downforce, enhancing helmet stability and comfort at racing speeds. Is installation permanent? No. The spoiler attaches using high-quality adhesive tape, allowing secure mounting without drilling or structural modification. Can I use both the front and rear spoilers together? Yes. Installing both provides the most balanced aerodynamic profile, reducing lift and improving stability across a range of speeds. Does the spoiler affect helmet certification? No. The rear spoiler is a Sparco OEM accessory designed to work within homologation tolerances when correctly installed. Maximize aerodynamic performance and maintain professional-level stability with the Sparco  Stealth Rear Spoiler—crafted to deliver precision airflow control for racers who demand every advantage.

Sparco Stealth Front Spoiler The Sparco Stealth Front Spoiler is a high-performance aerodynamic upgrade designed for Sparco’s Stealth RF series helmets. Developed through wind tunnel testing, this spoiler enhances helmet stability at high speeds by reducing lift and improving airflow efficiency—helping drivers stay focused and in control, even in the most demanding racing conditions. Aerodynamic Precision for Peak Helmet Stability Crafted from lightweight, durable materials, the Sparco Stealth Front Spoiler integrates seamlessly with the helmet’s profile. It minimizes buffeting and turbulence, improving downforce and reducing fatigue during long stints. Whether you’re on a road course, oval, or endurance circuit, this spoiler delivers a measurable performance advantage and a professional-grade look. Features • Designed exclusively for Sparco Stealth RF helmets• Reduces aerodynamic lift and helmet movement• Lightweight, high-strength polymer construction• Wind tunnel tested for maximum stability• Improves airflow and reduces neck strain• Easy to install with included adhesive backing• Clear finish for a seamless OEM appearance Sparco Stealth Front Spoiler FAQs: What helmets are compatible with this spoiler? The Sparco Stealth Front Spoiler is engineered for Sparco STEALTH RF helmets and fits perfectly with the helmet’s factory contour. Does the spoiler really make a difference at speed? Yes. The aerodynamic design significantly reduces helmet lift and buffeting at higher speeds, increasing driver comfort and stability. Is this spoiler available in different colors? The spoiler is available in a clear finish to maintain the helmet’s sleek, factory appearance and comply with most racing series requirements. How do I install the Sparco STEALTH Front Spoiler? Installation is quick—simply clean the helmet surface, align the spoiler, and apply the adhesive backing. No drilling or permanent modification is required. Is this spoiler FIA-approved? The spoiler is an OEM Sparco accessory and designed to maintain compliance with helmet homologation standards when properly installed. Enhance your aerodynamics and professional edge with the Sparco Stealth Front Spoiler—precision-built to keep you stable, streamlined, and race-ready at every turn.

Sparco Helmet Shields (Stealth RF) The Sparco Helmet Shields (Stealth RF) are designed to give you optimal clarity, visibility, and protection on track. Engineered from high-grade optical materials, these visors ensure minimal distortion while offering advanced anti-fog and anti-scratch coatings. Whether you’re running under blazing sun or in evening sessions, the Stealth RF shield keeps your vision sharp and your focus locked on the apex. High-Performance Clarity for Racing Precision Developed for Sparco’s premium racing helmet lineup, the Stealth RF visor delivers exceptional light management and UV defense. It’s built to handle everything from bright daylight to low-light endurance conditions, ensuring peak optical performance in all environments. The aerodynamic curvature minimizes wind resistance while maintaining a sleek, professional look for serious racers. Features • Compatible with Sparco full-face helmets (RF series)• Optically correct for distortion-free vision• Advanced anti-fog and anti-scratch coatings• UV-resistant for maximum eye protection• Available in multiple tints for varying light conditions• Easy tool-free installation and replacement• Lightweight and impact-resistant construction Sparco Helmet Shields (Stealth RF) FAQs: Are these shields compatible with all Sparco helmets? The Stealth RF shields are specifically designed for Sparco RF-series helmets, ensuring a perfect fit and seal. Do the STEALTH RF shields come in different tints? Yes. They’re available in clear, light smoke, dark smoke, mirrored, and iridium finishes for various lighting conditions. How do I clean my Sparco helmet shield? Use mild soap and water with a microfiber cloth. Avoid harsh cleaners that can damage the anti-fog coating. Can I use this shield for night racing? Absolutely. The clear or light smoke variants are ideal for low-light or night track sessions. Does this shield fit older Sparco models? It’s compatible with most recent RF-series helmets but not older GP or WTX models. Check your helmet’s model number before purchasing. Upgrade your vision and protection with the Sparco Helmet Shields (Stealth RF) — engineered for racers who demand uncompromising clarity and performance on every lap.

CMS Performance Bolt In Roll Bar This Roll Bar Fits The Toyota GR Corolla GZEA14 (2023+) The Superior Bolt-In Roll Bar for the GR Corolla The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the GR Corolla. Engineered with a premium placed on safety and structural rigidity, the exceptional design of the CMS Performance Roll Bar integrates perfectly with the car's sporty, rally-inspired interior. CMS Performance uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength, impact absorption, and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used by other roll bar manufacturers. This makes the CMS Performance Roll Bar for the GR Corolla superior in every way, including resistance to deformation, weld integrity, and energy dissipation. The one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. The rearward kickers are optimized for support in a roll-over event while maintaining an unobstructed rear view for the driver. The main hoop cross bar is designed to locate your racing harness shoulder straps at the proper angle (0° to -20° front-to-back) to the driver's shoulders regardless of seat position. True Bolt-In Installation Without Sacrificing Safety or Looks Installation instructions are here The CMS Performance Roll Bar bolts directly to chassis strong points without the need for any significant modifications to the chassis or use of under-car backing plates. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. No welding or chassis cutting is involved in installation – a truly plug-and-play roll bar! Exceptional Color Options Set CMS Performance Apart Each CMS Performance roll bar includes custom powder coating in your choice of color-matched factory paint colors for your GR Corolla1! You don't have to settle for generic black, white, red, or yellow. CMS Performance can also powder coat your roll bar in one of our amazing technical colors, such as the astoundingly cool Superchrome! And, of course, there's always our rich satin black option for a stealthy installation. Custom Made Rear Seat Delete Kit Available CMS Performance offers an optional customized rear seat delete kit made specifically for the GR Corolla. It is specially modified to fit the CMS Performance Roll Bar, giving your installation an amazing factory-finished look. CMS Performance: The Best Products At The Best Price An unwavering focus on cutting-edge materials, unsurpassed design & construction, and premium fit & finish has propelled CMS Performance roll bars to the top of the industry. The CMS Performance GR Corolla Roll Bar is the latest addition to our growing catalog, offering unsurpassed safety, integrity, design and customization to customers taking this amazing car to the next level on the street or at the track. CMS Performance Roll Bar Details Manufacturer: CMS Performance Manufacturer Part: CPRB-GRCOR Materials: 1.75″ X .095" Docol R8 Advanced High Strength Steel Features: One-piece main hoop for superior strength and occupant safety; proprietary kicker design eases installation while maintaining exceptional strength CNC-cut mounting plates CNC machined high-strength-steel interlocking joints Allows full seat travel with virtually any seat All USA-made Grade 8 hardware included Comes with detailed installation instructions 1 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight variance from the OEM paint color is normal and is imperceptible with the roll bar installed inside the car. This product is intended for off-road race track use only.

Sparco Stealth RF Carbon | FIA 8859-2024 / SA2025 The Sparco Stealth RF Carbon Helmet is built for racers who demand elite protection and comfort at the highest levels of motorsport. With a lightweight carbon fiber shell that exceeds the newest FIA 8859-2024 and Snell SA2025 standards, it delivers unmatched strength and energy absorption without the bulk. Sparco’s advanced ventilation system keeps you cool under pressure, while the fire-retardant, removable linings ensure lasting comfort throughout endurance sessions. Every detail of this helmet is engineered to perform—ready to race straight out of the box with factory-installed HANS/FHR posts. Pure Carbon Performance. Pure Racing Focus. Sparco Stealth RF Carbon Features Lightweight Carbon Fiber Shell: Constructed from ultra-strong carbon fiber to minimize neck fatigue and maximize protection while maintaining an optimal weight balance. Efficient Ventilation System: Multiple air intakes on the chin bar and top, combined with rear exhaust ports, help regulate airflow and reduce heat build-up during long stints. Removable Fire-Retardant Linings: Easily removable and washable interior linings keep your helmet fresh and race-ready. Optional Drink System Compatibility: Integrated ports make it simple to connect an optional hydration system for endurance events. 3-Position Adjustable Visor: Adjustable visor positions provide tailored airflow and visibility for varying track conditions. Central Locking Visor Mechanism: The secure locking system ensures a firm seal and reliability at high speeds. Factory-Fitted FHR Posts: Supplied ready for HANS/FHR use, meeting professional racing safety standards. Dual Shell Sizes: Available in two shell sizes for precise fit and comfort. Seven Size Options: Covers a wide range of head sizes to achieve a perfect racing fit. Certifications: FIA 8859-2024 and Snell SA2025 approved for use in professional and amateur motorsport worldwide. Sparco Stealth RF Carbon FAQs Is the Sparco Stealth RF Carbon legal for FIA-sanctioned events? Yes, it meets FIA 8859-2024 and Snell SA2025 standards, making it approved for all major motorsport disciplines. Does this helmet include HANS posts? Yes, it comes pre-installed with factory-fitted FHR (HANS) posts, ready for immediate use. What sizes are available? The Stealth RF Carbon is offered in seven sizes across two shell molds, ensuring optimal comfort and fit. Can I add a drink system? Yes, the helmet is pre-configured for an optional drink system setup, ideal for endurance and GT racing. How do I clean the interior? The interior fire-retardant linings are removable and washable, allowing easy maintenance between races. Take your racing experience to the next level with the Sparco Stealth RF Carbon Helmet — precision-built for uncompromised safety, cooling, and performance lap after lap.