New products

Totim Racing Self-Contained Foam Seat Insert Kits Totim Racing simplifies custom-fit race seat inserts with a sealed, self-contained foam system. No loose chemicals, no extra covers, and no helper required—the FIA fire-resistant bag molds to the driver in about 30 minutes and cures fully in roughly 40 minutes, so you can fit and race the same day. Fast, clean, and FIA fire-resistant Features • Pre-packaged, pre-measured two-part polyurethane expands cleanly inside the sealed bag for zero-mess fitting. • No tools needed—knead the pouch to mix, place in the cockpit, and let it expand around the driver’s position. • Fire-resistant outer bag meets FIA requirements; no additional cover is needed. • Ready to trim or race in about 40 minutes—quick enough to complete during a lunch break. • T3096 series Ideal for tight cockpits or as a liner/insert inside a seat shell or extractable seat - large/medium/small driver and for seat shell padding designed to fit under legs, lumbar or back area  Totim Racing Foam Seat Insert FAQs: How long does the Totim foam insert take to make? The molding process takes about 30 minutes; full curing is approximately 40 minutes. Do I need protective gear while using it? No. The components remain sealed inside the FIA fire-resistant bag; you never handle the chemicals. Can the insert be trimmed after curing? Yes. After curing, you can trim to fine-tune fit and edge clearance around belts and cockpit panels. Does the kit require a helper? No. The sealed-bag design lets one person mix, position, and mold the insert without assistance. Create a professional-grade, custom-fitted seat insert quickly and cleanly—i is Ideal for tight cockpits or as a liner/insert inside a seat shell or extractable seat - large/medium/small driver and for seat shell padding designed to fit under legs, lumbar or back area

Totim Racing Self-Contained Foam Seat Insert Kits Totim Racing simplifies custom-fit race seat inserts with a sealed, self-contained foam system. No loose chemicals, no extra covers, and no helper required—the FIA fire-resistant bag molds to the driver in about 30 minutes and cures fully in roughly 40 minutes, so you can fit and race the same day. Fast, clean, and FIA fire-resistant Features • Pre-packaged, pre-measured two-part polyurethane expands cleanly inside the sealed bag for zero-mess fitting. • No tools needed—knead the pouch to mix, place in the cockpit, and let it expand around the driver’s position. • Fire-resistant outer bag meets FIA requirements; no additional cover is needed. • Ready to trim or race in about 40 minutes—quick enough to complete during a lunch break. • T3094 series uses a 100 × 90 cm bag sized for GT, NASCAR, and WRC-style seats where a compact wrap-around insert is preferred. Totim Racing Foam Seat Insert FAQs: How long does the Totim foam insert take to make? The molding process takes about 30 minutes; full curing is approximately 40 minutes. Do I need protective gear while using it? No. The components remain sealed inside the FIA fire-resistant bag; you never handle the chemicals. Can the insert be trimmed after curing? Yes. After curing, you can trim to fine-tune fit and edge clearance around belts and cockpit panels. Does the kit require a helper? No. The sealed-bag design lets one person mix, position, and mold the insert without assistance. Create a professional-grade, custom-fitted seat insert quickly and cleanly—ideal comfort and stability for GT, NASCAR, and WRC applications.

Totim Racing Self-Contained Foam Seat Insert Kits Totim Racing simplifies custom-fit race seat inserts with a sealed, self-contained foam system. No loose chemicals, no extra covers, and no helper required—the FIA fire-resistant bag molds to the driver in about 30 minutes and cures fully in roughly 40 minutes, so you can fit and race the same day. Fast, clean, and FIA fire-resistant Features • Pre-packaged, pre-measured two-part polyurethane expands cleanly inside the sealed bag for zero-mess fitting. • No tools needed—knead the pouch to mix, place in the cockpit, and let it expand around the driver’s position. • Fire-resistant outer bag meets FIA requirements; no additional cover is needed. • Ready to trim or race in about 40 minutes—quick enough to complete during a lunch break. • T3093 series uses a trapezoid bag (140 length × 100 × 85 cm) sized for deep, wrap-around inserts in many F2, F3, Formula Renault, and Indy-style cockpits. Recommended for F2, F3, Formula Renault, IndyCar (trapezoid 140 × 100 × 85 cm) Totim Racing Foam Seat Insert FAQs: How long does the Totim foam insert take to make? The molding process takes about 30 minutes; full curing is approximately 40 minutes. Do I need protective gear during fitting? No. The components remain sealed inside the FIA fire-resistant bag; you never handle the chemicals. Can I trim the insert after curing? Yes. After curing, you can trim to fine-tune fit and edge clearance around belts and cockpit panels. Does the kit require a helper? No. The sealed-bag design lets one person mix, position, and mold the insert without assistance. Create a professional-grade, custom-fitted seat insert quickly and cleanly—ideal comfort and stability for F2, F3, Formula Renault, and IndyCar-style cockpits.

Totim Racing Self-Contained Foam Seat Insert Kits Totim Racing simplifies custom-fit race seat inserts with a sealed, self-contained foam system. No loose chemicals, no extra covers, and no helper required—the FIA fire-resistant bag molds to the driver in about 30 minutes and cures fully in roughly 40 minutes, so you can fit and race the same day. Fast, clean, and FIA fire-resistant Features • Pre-packaged, pre-measured two-part polyurethane expands cleanly inside the sealed bag for zero-mess fitting. • No tools needed—knead the pouch to mix, place in the cockpit, and let it expand around the driver’s position. • Fire-resistant outer bag meets FIA requirements; no additional cover is needed. • Ready to trim or race in about 40 minutes—quick enough to complete during a lunch break. • T3092 series uses a 140 × 100 cm bag sized for wrap-around inserts with lateral leg support in LMP3, F3, F2, Super Formula, Formula Renault, and Indy-style cockpits. Totim Racing Foam Seat Insert FAQs: How long does the Totim foam insert take to make? The molding process takes about 30 minutes; full curing is approximately 40 minutes. Do I need protective gear while using it? No. The components remain sealed inside the FIA fire-resistant bag; you never handle the chemicals. Can the insert be trimmed after curing? Yes. After curing, you can trim to fine-tune fit and edge clearance around belts and cockpit panels. Does the kit require a helper? No. The sealed-bag design lets one person mix, position, and mold the insert without assistance. Create a professional-grade, custom-fitted seat insert quickly and cleanly—ideal comfort and stability for LMP3, LMP4, and formula-style cockpits.

Totim Racing Self-Contained Foam Seat Insert Kits  Totim Racing has changed the game for custom-fit racing seats with their self-contained foam insert kits. No messy chemicals, no extra coverings, and no need for helpers—just a fire-resistant FIA-approved bag that molds to you in under 30 minutes. Perfect for pros and serious track-day drivers who want a secure fit without the hassle. Fast, Clean, and FIA Fire-Resistant Features • Pre-packaged, pre-measured 2-part polyurethane mix expands cleanly inside the sealed bag. • No tools required—simply knead the pouch, place it in the cockpit, and let the foam expand. • Fire-resistant outer bag meets FIA safety standards with no additional cover needed. • Fully cured and ready to trim or race within 40 minutes—fast enough to complete during a lunch break. • T3090 Series includes a 140 x 100 cm bag, large enough for wrap-around inserts with lateral leg support in F4, Radical, GT, WRC, Prototypes cockpits. Totim Racing Foam Seat Insert FAQs: How long does the Totim foam insert take to make? The complete molding process takes around 30 minutes, with full curing in 40 minutes. Do I need to wear protective gear while using it? No—the chemicals remain sealed inside the FIA-approved fire-resistant bag. You never touch them. Can the insert be trimmed after curing? Yes, once cured, the foam can be trimmed to fine-tune the fit. Create a professional-grade custom racing seat insert quickly, safely, and without the mess. Get the fit you need to stay focused and secure on track with Totim Racing.

Stilo ST6 FN Composite Helmet SA2025 The Legendary Stilo FN Composite Helmet - Forever Ahead For over 25 years, Stilo has lead the way in racing helmet innovation and the new ST6 line marks a bold new chapter. With input from Porsche and F1 teams, Stilo developed enhanced front- and top aerodynamics to deliver exceptional performance from the new Stilo ST6 line of helmets. Developed with the world's top drivers from Formula One and endurance racing, the ST6 reflects real-world needs at every level of auto racing. The Stilo ST6 composite helmet is one of the lightest composite helmets on the market. It features enhanced airflow, visibility, and comfort while maintaining market-leading safety standards. Developed with input from the Aston Martin F1 team, every feature of the ST6 – from the track-tested aerodynamics to the cutting edge dual-lock visor system – is designed to give racers a performance edge. The brand new Stilo ST6 helmet improves on the market-leading Stilo ST5 in every way, including the following: 10% lighter than Stilo ST5 26% more airflow than Stilo ST5 11% more visibility More comfortable liner and cheek pads More shell sizes for lower weight Improved visor construction for durability and ease of care Higher-quality visor hardware increases reliability Stilo ST6 FN Composite Auto Racing Helmet Features Puro Tech: Stilo's proprietary carbon fiber manufacturing process eliminates the need for extra lacquers and additional coatings, minimizing the weight of your new helmet. With the Puro process, Stilo delivers the lightest and safest helmet on the market. Added Shell Size: now offered in four shell sizes, the Stilo ST6 FN auto racing helmet gives you the lightest and smallest shell size possible for your head shape. Increased Airflow Design: by utilizing key partnerships with Formula One teams, Stilo has redesigned the ST6 front ventilation to increase airflow while maximizing safety. The new Stilo ST6 also comes standard with ventilation holes in the top, channeling airflow through the EPS foam to reduce sweat and moisture, keeping you performing at your best. Increased Downward Visibility: with input from professional drivers around the globe, Stilo has increased the downward field-of-view of the Stilo ST6, making harness fastening easier during driver changes and giving you greater situational awareness on the track. Interior Comfort: new and improved cheek padding in the Stilo ST6 was designed to enhance aero stability and increase comfort. Injection Molded Visor: the brand new visors for the ST6 provide exceptionally clear visibility and are coated in a new high-performance, washable anti-fog treatment. Dual Visor Lock: pioneering the industry, the dual visor lock on the Stilo ST6 complies with FIA standards in both the fully closed and ventilation positions. Updated Visor Hardware: engineered for easier visor installation and smoother actuation, this visor hardware can be purchased in a variety of anodized finishes. What’s Changing in SA2025 Auto Racing Helmets? SA2025 helmets are here, and while the changes may not be groundbreaking, they represent an important evolution in motorsport safety. According to the Snell Memorial Foundation, the SA2025 standard is an evolutionary update from SA2020—not a complete overhaul. Unlike the M2025 motorcycle standard, which adds rotational impact testing, the SA2025 auto racing helmet standard does not include rotational force requirements. Key SA2025 Helmet Safety Enhancements: Increased Impact Protection: SA2025 helmets are required to handle slightly higher impact speeds and achieve lower maximum peak G-force thresholds across all head-form sizes. Global FIA Alignment: These updated requirements bring the SA2025 standard into alignment with the new FIA 8859-2024 helmet safety regulation, creating more consistency across international motorsports. In short: SA2025 helmets are designed to offer enhanced linear impact protection, making them the safest Snell-rated auto racing helmets to date. Whether you're a competitive racer or a weekend track day enthusiast, upgrading to an SA2025-certified helmet ensures compliance with future racing regulations and gives you peace of mind at speed. Stilo Helmets ST6 FN Composite Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0810AF2V Homologation: FIA 8858-2015 Certification: Snell SA2020 Compatible shields: Stilo ST6 helmet shields Noise-attenuating earmuffs included Other Versions of the Stilo ST6 Racing Helmet Stilo ST6 GT Composite Helmet Stilo ST6 GT SA2020 Carbon Fiber Helmet Stilo Helmet ST6 FN 8859-ABP Helmet Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Zero ABP 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Composite Helmet Stilo ST6 FN 8859-ABP Helmet Stilo ST6 GT 8860 Carbon Fiber Helmet Stilo ST6 FN 8860 Carbon Fiber Helmet Stilo ST6 FN 8860-ABP Carbon Fiber Helmet Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Composite Auto Racing Helmet Sizing Note We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 61, which uses the large shell. Please order accordingly.   Measuring Your Head For Your New Stilo ST6 FN Composite Helmet The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Stilo ST6 GT Carbon Fiber Helmet SA2025 The legendary Stilo carbon helmet—lighter, cooler, clearer For over 25 years Stilo has led racing-helmet innovation, and the ST6 line marks a bold new chapter. With input from top programs, engineers refined the front and top aerodynamics for high-speed stability. The carbon ST6 prioritizes airflow, visibility, and comfort while maintaining modern safety standards. From track-tested aero to a dual-lock visor system, every detail is designed to give racers a performance edge. The ST6 improves on the market-leading ST5 in key areas: 10% lighter than Stilo ST5 26% more airflow than Stilo ST5 11% more visibility Refined liner and cheek pads More shell sizes for optimized weight Reworked visor construction for durability and easy care Updated visor hardware for reliability Stilo ST6 GT Carbon Helmet Features Puro Tech: Stilo’s carbon process minimizes extra coatings to reduce mass without compromising protection. New shell size options: now offered in three shell sizes to deliver the smallest, lightest shell appropriate for your head size. STILO ST6 GT CARBON FIBER HELMET CUSTOMIZATION PAD CHART Increased airflow design: redesigned front intake and top vents route air through EPS channels to reduce sweat and moisture. Increased downward visibility: a wider eyeport improves belt fastening and cockpit awareness. Interior comfort: reshaped cheek pads stabilize fit and comfort at speed. Injection-molded visor: clear optics with a washable high-performance anti-fog treatment. Dual visor lock: compliant with FIA standards in both closed and vent positions. Updated visor hardware: smoother actuation and easier installation; available in anodized finishes. Stilo Helmets ST6 GT Carbon Fiber Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0800AF1X Homologation: FIA 8858-2015 (FHR posts) Certification: Snell SA2025 Compatible shields: Stilo ST6 helmet shields Noise-attenuating earmuffs included Other Versions of the Stilo ST6 Racing Helmet Stilo ST6 FN SA2025 Carbon Fiber Helmet Stilo ST6 FN 8859-ABP Helmet Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Zero 8860-2018 ABP Carbon Fiber Helmet Stilo ST6 GT Composite Helmet Stilo ST6 FN 8859-ABP Carbon Fiber Helmet Stilo ST6 GT 8860 Carbon Fiber Helmet Stilo ST6 FN 8860 Carbon Fiber Helmet Stilo ST6 FN 8860-ABP Carbon Fiber Helmet Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet Measuring Your Head for Your New Stilo ST6 GT Carbon Fiber Helmet The most effective helmet is one that fits properly. Have an assistant measure the circumference of your head about an inch above your eyebrows, around the largest point at the back, and back to the front. Take multiple measurements and use the largest. What’s Changing in SA2025 Auto Racing Helmets? SA2025 helmets are here, and while the changes may not be groundbreaking, they represent an important evolution in motorsport safety. According to the Snell Memorial Foundation, the SA2025 standard is an evolutionary update from SA2020—not a complete overhaul. Unlike the M2025 motorcycle standard, which adds rotational impact testing, the SA2025 auto racing helmet standard does not include rotational force requirements. Key SA2025 Helmet Safety Enhancements: Increased Impact Protection: SA2025 helmets are required to handle slightly higher impact speeds and achieve lower maximum peak G-force thresholds across all head-form sizes. Global FIA Alignment: These updated requirements bring the SA2025 standard into alignment with the new FIA 8859-2024 helmet safety regulation, creating more consistency across international motorsports. In short: SA2025 helmets are designed to offer enhanced linear impact protection, making them the safest Snell-rated auto racing helmets to date. Whether you're a competitive racer or a weekend track day enthusiast, upgrading to an SA2025-certified helmet ensures compliance with future racing regulations and gives you peace of mind at speed. Stilo ST6 GT Carbon SA2025 Helmet FAQs Is this Snell SA2025 certified? Yes, this listing reflects SA2025 certification. What’s the difference between GT and FN? GT includes earmuffs for noise reduction and comms; FN is open-ear for maximum awareness and airflow. Can I use ST5 shields on the ST6? No. The ST6 uses its own shield family; choose ST6-specific shields and hardware. How should I choose my size? Measure head circumference and consult the pad chart; if between sizes, many drivers prefer the tighter fit for stability. This helmet will ship with signature required for delivery.

Stilo ST6 FN ABP 8859-2024 Carbon Fiber Helmet SA2025 Advanced ABP protection with Snell SA2025 performance For over 25 years Stilo has led helmet innovation, and the ST6 FN ABP marks a new benchmark. With development input from top programs, the ST6 refines front and top aero for stability, broadens airflow, and expands visibility so you can focus on driving. Built from carbon fiber for a light, rigid shell, the ST6 FN ABP blends comfort and cooling with modern safety. From the dual-lock visor system to the revised eyeport and venting, every detail is aimed at confidence and consistency on track. The ST6 improves on the market-leading ST5 in key areas: 10% lighter than Stilo ST5 26% more airflow than Stilo ST5 11% more visibility More comfortable liner and cheek pads More shell sizes for lower weight Improved visor construction for durability and ease of care Higher quality visor hardware for increased reliability Stilo ST6 FN ABP 8859-2024 Carbon Fiber Auto Racing Helmet Features Puro Tech – Stilo's carbon manufacturing approach minimizes extra coatings to reduce mass while maintaining protection. New shell size options – now offered in four shell sizes to deliver the smallest, lightest shell appropriate for your head. Increased airflow design – redesigned front intake and new top vents route air through EPS channels to reduce sweat and moisture. Increased downward visibility – a wider eyeport speeds up belt fastening and improves situational awareness. Interior comfort – reshaped cheek pads stabilize fit and comfort at speed. Injection-molded visor – improved optical clarity with a washable high-performance anti-fog treatment. Dual visor lock – compliant with FIA standards in both closed and vented positions. Updated visor hardware – smoother actuation and easier installation; available in anodized finishes. Stilo ST6 FN ABP Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0810AF1WY Homologation: FIA 8859-2024 ABP Certification: Snell SA2025 Compatible shields: Stilo ST6 ABP helmet shields Open-ear FN design for maximum awareness and cooling Other Versions of the Stilo ST6 Racing Helmet Stilo ST6 GT SA2025 Carbon Fiber Helmet Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Zero ABP 8860-2018 Carbon Fiber Helmet Stilo ST6 GT Composite Helmet Stilo ST6 FN 8860 Carbon Fiber ABP Helmet Stilo ST6 GT 8860 Carbon Fiber Helmet Stilo ST6 FN 8860 Carbon Fiber Helmet Stilo ST6 FN Carbon Fiber Helmet Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet Stilo ST6 FN ABP 8859-2024 Sizing Note Customers who typically wear a size 59 in other brands are often most comfortable in a Stilo size 60, which uses the large shell.   How to Measure for Your Stilo ST6 FN ABP Helmet Use a dressmaker’s tape or string to measure around your head about one inch above your eyebrows and around the largest point at the back. Take multiple measurements and use the largest. Proper fit is critical for comfort and safety. What’s Changing in SA2025 Auto Racing Helmets? SA2025 helmets are here, and while the changes may not be groundbreaking, they represent an important evolution in motorsport safety. According to the Snell Memorial Foundation, the SA2025 standard is an evolutionary update from SA2020—not a complete overhaul. Unlike the M2025 motorcycle standard, which adds rotational impact testing, the SA2025 auto racing helmet standard does not include rotational force requirements. Key SA2025 Helmet Safety Enhancements: Increased Impact Protection: SA2025 helmets are required to handle slightly higher impact speeds and achieve lower maximum peak G-force thresholds across all head-form sizes. Global FIA Alignment: These updated requirements bring the SA2025 standard into alignment with the new FIA 8859-2024 helmet safety regulation, creating more consistency across international motorsports. In short: SA2025 helmets are designed to offer enhanced linear impact protection, making them the safest Snell-rated auto racing helmets to date. Whether you're a competitive racer or a weekend track day enthusiast, upgrading to an SA2025-certified helmet ensures compliance with future racing regulations and gives you peace of mind at speed. Stilo ST6 FN ABP 8859-2024 / SA2025 Helmet FAQs: Is this helmet Snell SA2025 certified? Yes, this listing reflects SA2025 certification in addition to FIA 8859-2024 ABP homologation. What does ABP mean? ABP indicates additional frontal protection meeting the FIA’s Advanced Ballistic Protection requirement. What’s the difference between FN and GT? FN is open-ear for maximum awareness and airflow; GT uses earmuffs for noise reduction and comms. Can I use ST5 shields on the ST6? No. The ST6 uses its own shield family; choose ST6-specific shields and hardware. This helmet will ship with signature required for delivery.

Stilo ST6 FN Carbon Fiber Helmet SA2025 The Legendary Stilo Carbon Helmet - Forever Ahead For over 25 years, Stilo has led racing helmet innovation and the ST6 Carbon ushers in a bold new chapter. With input from top programs, engineers refined the front and top aerodynamics for stable performance at speed. Developed with drivers from Formula One and endurance racing, the ST6 reflects real-world needs at every level. The ST6 Carbon is among the lightest full-face helmets available, pairing airflow, visibility, and comfort with modern safety. From the track-tested aero to the dual-lock visor system, every update is aimed at confidence and consistency behind the wheel. The ST6 improves on the market-leading ST5 in key areas: 10% lighter than Stilo ST5 26% more airflow than Stilo ST5 11% more visibility Refined liner and cheek pads More shell sizes to optimize weight Reworked visor construction for durability and easy care Updated visor hardware for reliability Stilo ST6 Auto Racing Helmet Features Puro Tech: Stilo’s carbon process minimizes additional coatings to reduce mass while maintaining protection. New Shell Size Options: now offered in four shell sizes, the ST6 FN helps deliver the smallest, lightest shell appropriate for your head size. Increased Airflow Design: redesigned front ventilation and standard top venting route air through EPS channels to reduce sweat and moisture. Increased Downward Visibility: improved eyeport makes harness fastening faster and enhances situational awareness. Interior Comfort: reshaped cheek pads stabilize fit and comfort at speed. Injection Molded Visor: clear optics with a washable high-performance anti-fog treatment. Dual Visor Lock: complies with FIA standards in both closed and vent positions. Updated Visor Hardware: smoother actuation and easier installation; available in multiple anodized finishes. Stilo ST6 FN Carbon Fiber Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0810AF1X Homologation: FIA 8858-2015 Certification: Snell SA2025 Compatible shields: Stilo ST6 helmet shields Open-ear FN design (no earmuffs) for maximum awareness and cooling Other Versions of the Stilo ST6 Racing Helmet Stilo ST6 GT SA2025 Carbon Fiber Helmet Stilo Helmet ST6 FN 8859-ABP Helmet Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Zero ABP 8860-2018 Carbon Fiber Helmet Stilo ST6 GT Composite Helmet Stilo ST6 FN 8859-ABP Helmet Stilo ST6 GT 8860 Carbon Fiber Helmet Stilo ST6 FN 8860 Carbon Fiber Helmet Stilo ST6 FN 8860-ABP Carbon Fiber Helmet Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet What’s Changing in SA2025 Auto Racing Helmets? SA2025 helmets are here, and while the changes may not be groundbreaking, they represent an important evolution in motorsport safety. According to the Snell Memorial Foundation, the SA2025 standard is an evolutionary update from SA2020—not a complete overhaul. Unlike the M2025 motorcycle standard, which adds rotational impact testing, the SA2025 auto racing helmet standard does not include rotational force requirements. Key SA2025 Helmet Safety Enhancements: Increased Impact Protection: SA2025 helmets are required to handle slightly higher impact speeds and achieve lower maximum peak G-force thresholds across all head-form sizes. Global FIA Alignment: These updated requirements bring the SA2025 standard into alignment with the new FIA 8859-2024 helmet safety regulation, creating more consistency across international motorsports. In short: SA2025 helmets are designed to offer enhanced linear impact protection, making them the safest Snell-rated auto racing helmets to date. Whether you're a competitive racer or a weekend track day enthusiast, upgrading to an SA2025-certified helmet ensures compliance with future racing regulations and gives you peace of mind at speed. Stilo ST6 FN Carbon Fiber SA2025 Helmet FAQs: Is this helmet Snell SA2025 certified? Yes, this listing reflects SA2025 certification for U.S. auto racing. What does FN mean? FN is the open-ear version for maximum cockpit awareness and airflow; GT includes earmuffs for noise reduction and comms. Can I reuse my ST5 shields? No. The ST6 uses its own shield system; choose ST6-specific shields and hardware. How should I choose my size? Measure head circumference and consult the size/pad chart. If between sizes, many drivers prefer the tighter fit for stability. Measuring Your Head For Your New Stilo ST6 FN Carbon Fiber Helmet The most effective helmet is one that fits properly. Have an assistant measure around your head about an inch above the eyebrows, around the largest point at the back, and back to the front. Take multiple measurements and use the largest. This helmet will ship with signature required for delivery.

Stilo ST6 GT Composite Helmet SA2025 The legendary Stilo composite—lighter, cooler, clearer For over 25 years, Stilo has led racing-helmet innovation and the ST6 line marks a bold new chapter. With input from top programs, engineers refined front and top aerodynamics for stability at speed. The ST6 GT Composite emphasizes airflow, visibility, and long-stint comfort while meeting modern safety targets. From track-tested aero to a dual-lock visor system, every update is about confidence in the car. The ST6 improves on the market-leading ST5 in key areas: ~10% lighter than Stilo ST5 ~26% more airflow than Stilo ST5 ~11% wider downward visibility Refined liner and cheek pads More shell sizes to optimize weight Reworked visor construction for durability and easy care Updated visor hardware for smoother actuation Stilo ST6 GT Composite Auto Racing Helmet Features Puro Tech: Stilo's composite process minimizes extra coatings to reduce mass without compromising protection. Added shell size: now offered in three shell sizes, the ST6 GT helps deliver the smallest, lightest shell appropriate for your head size. STILO ST6 GT HELMET SIZE AND PAD CHART FOR CUSTOMIZATION Increased airflow design: redesigned front intake and top vents route air through EPS channels to reduce sweat and moisture. Increased downward visibility: a wider field of view speeds up belt fastening and improves situational awareness. Interior comfort: revised cheek padding stabilizes fit and comfort at speed. Injection molded visor: clear optics with a washable high-performance anti-fog treatment. Dual visor lock: compliant with FIA standards in both closed and vent positions. Updated visor hardware: smoother actuation and easier installation; available in anodized finishes. Stilo Helmets ST6 GT Composite Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0800AF2X Homologation: FIA 8858-2015 Certification: Snell SA2025 Compatible shields: Stilo ST6 helmet shields Noise-attenuating earmuffs Stilo ST6 Size & Measurement Customers who typically wear a size 59 in other brands are often most comfortable in a Stilo size 61 (large shell). If you’re between sizes, many drivers prefer the tighter option for stability. What’s Changing in SA2025 Auto Racing Helmets? SA2025 helmets are here, and while the changes may not be groundbreaking, they represent an important evolution in motorsport safety. According to the Snell Memorial Foundation, the SA2025 standard is an evolutionary update from SA2020—not a complete overhaul. Unlike the M2025 motorcycle standard, which adds rotational impact testing, the SA2025 auto racing helmet standard does not include rotational force requirements. Key SA2025 Helmet Safety Enhancements: Increased Impact Protection: SA2025 helmets are required to handle slightly higher impact speeds and achieve lower maximum peak G-force thresholds across all head-form sizes. Global FIA Alignment: These updated requirements bring the SA2025 standard into alignment with the new FIA 8859-2024 helmet safety regulation, creating more consistency across international motorsports. In short: SA2025 helmets are designed to offer enhanced linear impact protection, making them the safest Snell-rated auto racing helmets to date. Whether you're a competitive racer or a weekend track day enthusiast, upgrading to an SA2025-certified helmet ensures compliance with future racing regulations and gives you peace of mind at speed. Stilo ST6 GT Composite SA2025 Helmet FAQs Is this Snell SA2025 certified? Yes, this listing reflects SA2025 certification for U.S. auto racing. What’s the difference between GT and FN? GT includes earmuffs for noise reduction and comms; FN is open-ear for maximum awareness and airflow. Can I reuse ST5 shields? No, the ST6 uses its own shield family; choose ST6-specific shields and hardware. Ships with signature required.

Stilo ST6 Offshore Composite Helmet SA2025 Lighter, Cooler, Clearer. For over 25 years, Stilo has led helmet innovation, and the new ST6 line moves the benchmark again. With development input from top-level programs, the ST6 brings refined front and top aerodynamics, expanded airflow, and a wider field of view to help you strap in faster and drive with more confidence. The ST6 Offshore Composite keeps weight down while adding ventilation and clarity where it matters. From the track-tested aero to the dual-lock visor mechanism, every update is about performance you can feel in the car. The ST6 improves on the beloved ST5 in these key areas: About 10% lighter than comparable ST5 models for reduced neck fatigue in long sessions Approximately 26% more airflow to manage heat during hot-weather stints Roughly 11% wider downward visibility for quicker belts and better cockpit awareness Refined liner and cheek pads for stability at speed and all-day comfort Expanded shell size range to optimize weight and fit Re-engineered visor for durability and easy care with a washable anti-fog treatment Updated visor hardware for smoother actuation and easy swaps Stilo ST6 GT Composite Offshore Racing Helmet Features Puro Tech: Stilo’s composite process minimizes excess coatings to keep mass low without compromising protection. Added shell size: three shell sizes help deliver the smallest, lightest shell appropriate for your head size. STILO ST6 GT HELMET PAD CUSTOMIZATION CHART Increased airflow design: revised front intake and top vents route air through EPS channels to reduce sweat and keep you focused under pressure. Expanded downward visibility: improved eyeport makes buckle fastening and cockpit checks faster during driver changes. Interior comfort: reshaped cheek pads enhance aero stability and fit consistency at speed. Injection-molded visor: clear optics with a washable high-performance anti-fog coating. Dual visor lock meets FIA standards in both closed and vent positions. Updated visor hardware: smoother operation and easier installation; available in multiple anodized finishes. Stilo Helmets ST6 GT Composite Offshore Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: DA0802RF2X Homologation: FIA 8858-2015 (HANS posts) Certification: Snell SA2025 Compatible shields: Stilo ST6 helmet shields Noise-attenuating earmuffs included (ideal for intercom clarity in loud cabins) Other Versions of the Stilo ST6 Racing Helmet Stilo ST6 FN Carbon Fiber Helmet Stilo ST6 GT SA2025 Carbon Fiber Helmet Stilo Helmet ST6 FN 8859-ABP Helmet Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Zero ABP 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Composite Helmet Stilo ST6 FN 8859-ABP Helmet Stilo ST6 GT 8860 Carbon Fiber Helmet Stilo ST6 FN 8860 Carbon Fiber Helmet Stilo ST6 FN 8860-ABP Carbon Fiber Helmet Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet Stilo ST6 GT Composite Offshore Racing Helmet Sizing Note Customers who typically wear a size 59 in other brands often prefer a Stilo size 61 (large shell). If you are between sizes or prefer a tighter fit, consider the smaller option.   Measuring Your Head For Your New Stilo ST6 Offshore Composite Helmet The most effective helmet is one that fits properly. Have an assistant measure the circumference of your head about an inch above the eyebrows, around the largest point at the back, and back to the front. Take multiple measurements and use the largest. What’s Changing in SA2025 Auto Racing Helmets? SA2025 helmets are here, and while the changes may not be groundbreaking, they represent an important evolution in motorsport safety. According to the Snell Memorial Foundation, the SA2025 standard is an evolutionary update from SA2020—not a complete overhaul. Unlike the M2025 motorcycle standard, which adds rotational impact testing, the SA2025 auto racing helmet standard does not include rotational force requirements. Key SA2025 Helmet Safety Enhancements: Increased Impact Protection: SA2025 helmets are required to handle slightly higher impact speeds and achieve lower maximum peak G-force thresholds across all head-form sizes. Global FIA Alignment: These updated requirements bring the SA2025 standard into alignment with the new FIA 8859-2024 helmet safety regulation, creating more consistency across international motorsports. In short: SA2025 helmets are designed to offer enhanced linear impact protection, making them the safest Snell-rated auto racing helmets to date. Whether you're a competitive racer or a weekend track day enthusiast, upgrading to an SA2025-certified helmet ensures compliance with future racing regulations and gives you peace of mind at speed. Stilo ST6 Offshore Composite SA2025 Helmet FAQs: Does the ST6 Offshore Composite meet Snell SA2025? Yes, this listing reflects the SA2025 certification for U.S. auto racing. What makes the Offshore version different? It includes noise-attenuating earmuffs designed to reduce cabin noise and improve intercom clarity. Can I use my ST5 shields on the ST6? No, the ST6 uses its own shield system; choose ST6-specific shields and hardware. How should I pick my size? Measure head circumference and consult the size chart; if you’re between sizes, many drivers prefer the tighter option for stability at speed. Is the visor anti-fog? Yes, the ST6 visor includes a washable, high-performance anti-fog treatment. This helmet ships signature required.

Recaro Podium Steel Side Mounts by CMS Performance  THIS MOUNT SET FITS THE FOLLOWING SEATS: Recaro Podium Medium Recaro Podium Large PODIUM RACING SEAT MOUNTING These Recaro Steel Side Mount brackets for the Recaro Podium seat fits both the medium and large size seats.  Strong, rigid, and made specifically for your Recaro Podium seat, this simple side mount system is for drivers who demand the highest quality in their safety gear.   Sold as pair for one seat.The Recaro Podium steel side mounts by CMS Performance are designed to be used exclusively with Recaro Podium seats. RECARO PODIUM STEEL SIDE MOUNT DETAILS Manufacturer: CMS Performance Manufacturer part no.: CMSP-SeatMount-Recaro-Podium-BLACK One pair of side mounts Steel construction For use with the Recaro Podium seats

Recaro Podium Carbon Fiber Racing Seat (Includes Pair of Driver & Passenger Seats) Pair (Driver and Passenger Side seats are included) Note: Black perlon sets are pre-order and will be available August 18, 2026.  They do NOT have FIA homologation decals. The new Recaro Podium is much more than a thoroughbred CFRP shell seat. It’s a pioneering seat design for the contrasting demands of road and track. It’s not just its sleek outline, visible structures or motorsport-inspired pads in varying thicknesses that make heads turn. The Podium stands out because of its superior quality and exceptional performance on all road types – for driving day-to-day and at the limit. The Recaro Podium is the only retrofit shell seat on the market that is approved for use on public roads (including German ABE certification) and has FIA 8855-1999 homologation1. Racing seat technology doesn’t get any better than this! The Recaro Podium CF comes with ABE/component (German general roadworthiness approval) 3-point seatbelt certification available for many vehicles. (ABE/component certification only in conjunction with Recaro base frame and side mount.) Don't forget about the accessories needed for your installation including Podium specific Recaro side mounts and Recaro sliders for your new Recaro Podium seats. Recaro Podium CF Racing Seat Details Manufacturer: Recaro Seat shell: carbon fiber reinforced plastic (CFRP) Recaro Podium M: includes pads for medium-build drivers Recaro Podium L: includes pads for larger-build drivers Homologation: FIA 8855-1999 only with use of 4-, 5- or 6-point harness and appropriate side mounts1 Road use (ABE): with 3- or 4-point belts Developed for use with head and neck safety systems Suitable for race track or road use (ABE and FIA homologation1) Sleek racing seat look with exceptional lateral support Specially formed shoulder supports Integrated headrest AGR certified (German Healthier Backs Campaign) 1 Note: The Recaro Podium CF Carbon Racing Seat is FIA 8855-1999 approved only when installed using the Recaro FIA Steel Side Mount 5219910 available in the drop-down above.

Alpinestars KMX-5 v3 Kart Racing Suit  The Kart Racing Suit Where Speed Meets Innovation For the karting enthusiast who refuses to compromise, meet the newest version of the Alpinestars KMX-5 v3 Kart Racing Suit. This isn't just a suit, it's a testament to innovation and passion. Designed with the kart racer's needs in mind, this latest version of the vaunted KMX-5 promises to keep you cool even when the competition heats up. The newly updated Alpinestars KMX-5 v3 Kart Racing Suit delivers cutting-edge comfort, performance, and protection for drivers who demand the best. Certified to the latest FIA 8877-2022 Grade 1 kart suit homologation, the KMX-5 v3 is built for high-level competition while maintaining the comfort and breathability racers need for long sessions on track. With an advanced multi-layer construction, optimized panel design, and premium lining materials, it stands out among today’s best karting suits. Engineered for flexibility and cooling, this lightweight kart suit features stretch panels in key zones and strategically placed mesh inserts to enhance airflow and mobility during intense racing conditions. Whether you’re a seasoned competitor or an aspiring karting star, the KMX-5 v3 delivers everything you expect from top-tier Alpinestars kart racing suits—from a sleek, ergonomic cut to abrasion-resistant outer layers built for performance and longevity. It's the go-to Alpinestars suit for karting when every fraction of a second counts. Explore Alpinestars kart suit images, detailed specs, and verified Alpinestars kart suit reviews right here at Discovery Parts—your trusted source for premium FIA kart suits and the latest racewear technology. When you're ready to suit up like a pro, the Alpinestars KMX-5 v3 offers the fit, feel, and FIA-approved protection that serious kart racers demand. The New Alpinestars KMX-5 v3 is a Game Changer The Alpinestars KMX-5 v3 lets you race hard and stay cool. With its innovative laser-cut perforations on the upper chest and back, you'll feel the breeze while you're blazing past the competition. Light as air, the KMX-5 v3 is crafted from an exclusive blend of polyester and polyamide, giving you maximum protection with minimum weight. Because who needs extra baggage on the track? Strategically positioned tech mesh panels help keep you at the optimal body temperature, whether you're winding through a slow chicane or speeding down a straightaway. Fit for the win, the Alpinestars KMX-5 v3 is anatomically engineered with pre-curved arms and legs. This karting suit is all about ensuring you're in the best position to take home the trophy. Alpinestars KMX-5 v3 Kart Racing Suit Details Meets the latest FIA 8877-2022 Grade 1 homologation standards. Advanced dual-layer construction is the perfect blend of performance, breathability, and weight savings. Durable reinforced panels in the seat belt area, ensuring minimal material bunching. Formula One features include Alpinestars' new extraction handle design and fully floating arm. Lightweight knitted wrist and ankle cuffs for a snug fit without the weight. Convenient thigh pockets give you that extra bit of space. Ready to Elevate Your Karting Game? The Alpinestars KMX-5 v3 Kart Racing Suit isn't just a racing suit; it's a commitment to excellence. In this suit, you're not just racing. You're making a statement. Alpinestars KMX-5 v3 Kart Racing Suit Size Chart Alpinestars KMX-5 v3 Kart Racing Suit – Frequently Asked Questions (FAQ) What makes the Alpinestars KMX-5 v3 one of the best karting suits? The Alpinestars KMX-5 v3 Kart Racing Suit is widely regarded as one of the best karting suits thanks to its blend of professional-level protection, lightweight construction, and driver-focused comfort. It’s designed with stretch zones, breathable mesh panels, and a pre-curved anatomical design to ensure full range of motion and cooling airflow—ideal for intense track conditions. Is the Alpinestars KMX-5 v3 FIA certified? Yes, the KMX-5 v3 is homologated to the latest FIA 8877-2022 Grade 1 kart suit standard. This certification is now required for many sanctioned karting events around the world, providing confidence that the suit meets or exceeds today’s strictest kart racing safety standards. What sizes are available for the Alpinestars KMX-5 v3 kart suit? The Alpinestars kart racing suit lineup offers a wide range of adult and youth sizes. With its tailored, performance-fit design and adjustable waist belt, the KMX-5 v3 provides a secure and ergonomic fit for drivers of all body types. Refer to the sizing chart on our product page at Discovery Parts for guidance on choosing the right size. Is the Alpinestars KMX-5 v3 a lightweight kart suit? Absolutely. Built with a multi-layer construction that balances durability with breathability, the KMX-5 v3 is a true lightweight kart suit. It's engineered to reduce driver fatigue without compromising protection, making it ideal for both sprint and endurance karting. Can I use the KMX-5 v3 for outdoor and indoor karting? Yes. The Alpinestars suit for karting is suitable for both outdoor and indoor karting. Its advanced ventilation and abrasion-resistant materials make it a versatile choice for a variety of racing environments, including hot climates and long race weekends. Why buy the KMX-5 v3 from Discovery Parts? As an authorized dealer, Discovery Parts offers only genuine Alpinestars kart racing suits, backed by fast shipping, race-season support, and knowledgeable service from real motorsports enthusiasts. When you shop with us, you’re getting more than gear—you’re getting expert guidance and track-tested trust.

XP-20 Micro-Start Lithium Jump Starter The new XP-20 Micro-Start is Antigravity's most powerful and compact jump starter yet, delivering unrivaled starting performance, ultra-fast charging, and a full suite of portable power features. POWERFUL JUMP STARTING + FAST RECHARGING Antigravity XP-20 Micro-Start Features: 800 A starting current (4000 A peak): jump-starts gas engines up to 10 L and diesel engines up to 8 L, plus cars, trucks, motorcycles, ATVs, and more. 20,000 mAh capacity (74 Wh) with Type-C PD 100 W ultra-fast charging—fully recharges in just one hour. Multiple outputs: Type-C PD 100 W, USB-A (QC3.0), additional USB-A, and 15 V/10 A DC for 12 V devices. 240-lumen built-in LED flashlight with steady, strobe, and SOS modes for emergency lighting. Large digital display shows state of charge, input/output watts, and clear icons for connection status and jump-start readiness. Compact 9.5" × 4.0" × 2.0" footprint makes this the smallest heavy-duty unit in its class. Includes carry case, clamps, cables, and charger. ANTIGRAVITY XP-20 MICRO-START FAQs What vehicles can the XP-20 start? It can jump-start gas engines up to 10 L, diesel engines up to 8 L, and power most cars, trucks, motorcycles, and powersports vehicles. How quickly does it recharge? Using the included PD 100 W charger, it fully recharges in about one hour—the fastest in its category. Can I charge electronics? Yes—charge laptops, tablets, phones, and 12 V accessories via its Type-C PD, USB-A, and DC outputs. What’s included in the kit? The XP-20 comes complete with a durable carry case, heavy-duty jumper clamps, USB-C and USB-A cables, a 12 V car charger, and an instruction manual. 1 Micro-Start XP-20 1 Carry Case 1 set of Jumper Clamps 1 USB-C to USB-C Cable 1 USB-A to USB-C Cable 1 Cig Lighter Adapter 1 SC100W Mobile/Car Charger 1 Instruction Manual The Micro-Start XP-20 is incredibly simple to use. It comes in a durable zippered Carry Case with EVERYTHING you need to Jump-Start your Vehicles and Charge your Electronics no matter where you are. Take portable power and jump-start capability wherever you go—order the XP-20 Micro-Start today!

XP-20-HD Micro-Start Heavy Duty Jump Starter The new Antigravity XP-20-HD Micro-Start Heavy Duty jump starter delivers the most powerful, compact portable power supply on the market, with unrivaled starting performance, fast charging, and built-in safety features. MAXIMUM STARTING POWER + FAST RECHARGING Antigravity XP-20-HD Micro-Start Features: Jump-start with 930A starting current (up to 4,650 A peak). Capable of starting gas engines up to 10 L and diesel engines up to 8 L in cars, trucks, motorcycles, ATVs, and boats. Power laptops, tablets, phones, & 12V devices from the 24,000 mAh (88.8 Wh) battery via a Type-C 100W PD port, dual USB-A outputs, and a 15V/10A DC output. Super-fast recharging in only one hour using the included PD 100W charger—the quickest recharge time in its class. Most compact heavy-duty jump starter with a 9.5" × 4.0" × 2.0" footprint for easy storage and portability. Bright built-in LED flashlight and large digital display provide clear state-of-charge and power-usage feedback on the go. Includes robust jump-start clamps with heavy-gauge cables and sturdy jaws, plus multiple safety protections such as reverse polarity and over-current protection. ANTIGRAVITY MICRO-START XP-20-HD FAQs How long does the XP-20-HD take to recharge? The unit fully recharges in about one hour using the supplied PD 100W charger. What vehicles can it start? It can jump-start gas engines up to 10 L, diesel engines up to 8 L, as well as ATVs, UTVs, and marine engines. Can I charge electronics from the XP-20-HD? Yes—you can quickly charge laptops, tablets, phones, and other devices via Type-C PD, USB-A, and DC outputs. Is the XP-20-HD suitable for motorcycle use? The heavy-duty clamps of the XP-20-HD are fairly large. For most bikes, we recommend the Antigravity XP-15 model. Stay powered and prepared wherever you go — order the XP-20-HD Micro-Start Heavy Duty Jump Starter now and never get stranded again!