New products

CHILLOUT PRO SPORT Fire Resistant Pants The CHILLOUT PRO SPORT underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track.  The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin temperature by up to eight degrees which will quicken your reflexes and reaction time on the track.  The Ultralight weight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track.  The Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body.  The Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint.  If you are serious about winning, then you need the Chillout Pro Sport underlayers in your gear bag.  FIA Homologation Standard: 8856-2018 SFI Homologation Specification: 3.3 Sizes: XS-XXL Colors: BLACK, CHARCOAL, WHITE Composition: 42% M-Aramide, 42% Viscose FR, 16% EA PERFORMANCE CHILLOUT PRO SPORT UNDERLAYER PANT BOTTOM SIZING AND USAGE CHILLOUT PRO SPORT UNDERWEAR All users shall ensure that the Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use. In order to obtain the maximum protection, all the clothing required in Apendix L (Chaper III, Article 2) to the FIA International Sporting Code should be used. Wearers are warned of the particular vulnerability of the neck, wrists, and ankles.  The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing. The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap.  The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist. MAINTENANCE CHILLOUT PRO SPORT UNDERWEAR Chillout PRO SPORT Flame Resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care.  Drivers should replace any and all items as soon as they show signs of wear.  Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time.  Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials. EMBROIDERY/LABELS CHILLOUT PRO SPORT UNDERLAYER PANT BOTTOM Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer. CLEANING/MAINTENANCE CHILLOUT PRO SPORT UNDERLAYER BOTTOM PANTS The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments.  EEC CERTIFICATION/GUARANTEE CHILLOUT PRO SPORT PANTS Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.  

CHILLOUT PRO SPORT Fire Resistant Shirt The CHILLOUT PRO SPORT underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track.  The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin temperature by up to eight degrees which will quicken your reflexes and reaction time on the track.  The Ultralight weight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track.  The Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body.  The Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint.  If you are serious about winning, then you need the Chillout Pro Sport underlayers in your gear bag.  FIA Homologation Standard: 8856-2018 SFI Homologation Specification: 3.3 Sizes: XS-XXL Colors: BLACK, CHARCOAL, WHITE Composition: 42% M-Aramide, 42% Viscose FR, 16% EA PERFORMANCE CHILLOUT PRO SPORT UNDERLAYER SHIRT SIZING AND USAGE CHILLOUT PRO SPORT UNDERWEAR All users shall ensure that the Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use. In order to obtain the maximum protection, all the clothing required in Apendix L (Chaper III, Article 2) to the FIA International Sporting Code should be used. Wearers are warned of the particular vulnerability of the neck, wrists, and ankles.  The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing. The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap.  The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist. MAINTENANCE CHILLOUT PRO SPORT UNDERWEAR Chillout PRO SPORT Flame Resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care.  Drivers should replace any and all items as soon as they show signs of wear.  Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time.  Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials. EMBROIDERY/LABELS CHILLOUT PRO SPORT UNDERLAYER SHIRT TOP Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer. CLEANING/MAINTENANCE CHILLOUT PRO SPORT UNDERLAYER SHIRT TOP The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments.  EEC CERTIFICATION/GUARANTEE CHILLOUT PRO SPORT SHIRT TOP Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.  

CHILLOUT PRO SPORT FIRE RESISTANT SOCKS The CHILLOUT PRO SPORT underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track.  The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin termperature by up to eight degrees which will quicken your reflexes and reaction time on the track.  The Ultralight weight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track.  The Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body.  The Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint.  If you are serious about winning, then you need the Chillout Pro Sport underlayers in your gear bag.  FIA Homologation Standard: 8856-2018 SFI Homologation Specification: 3.3 Sizes: S / M / L Colors: BLACK, WHITE Composition:28% Aramide, 28% Viscose FR, 22% Modacrylic, 18% Cotton, 4% Elastane PERFORMANCE CHILLOUT PRO SPORT SOCKS SIZING AND USAGE CHILLOUT PRO SPORT SOCKS All users shall ensure that the Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use. In order to obtain the maximum protection, all the clothing required in Apendix L (Chaper III, Article 2) to the FIA International Sporting Code should be used. Wearers are warned of the particular vulnerability of the neck, wrists, and ankles.  The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing. The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap.  The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist. MAINTENANCE CHILLOUT PRO SPORT SOCKS Chillout PRO SPORT Flame Resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care.  Drivers should replace any and all items as soon as they show signs of wear.  Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time.  Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials. EMBROIDERY/LABELS CHILLOUT PRO SPORT SOCKS Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer. CLEANING/MAINTENANCE CHILLOUT PRO SPORT SOCKS The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments.  EEC CERTIFICATION/GUARANTEE CHILLOUT PRO SPORT SOCKS Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.  

Chillout Pro Sport Dual Layer Balaclava FIA/SFI RATED HEAT AND FIRE RESISTANCE Chillout Pro Sport underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track. The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin temperature by up to 8º F which will quicken your reflexes and reaction time on the track. THERMO REGULATING The ultra-lightweight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track. Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body. Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint. If you are serious about winning, then you need Chillout Pro Sport underlayers in your gear bag. DETAILS FIA Homologation Standard: FIA 8856-2018 SFI Homologation Specification: SFI 3.3 Sizes: one size Colors: black, charcoal, or white Composition: 42% M-Aramide, 42% Viscose FR, 16% EA Sizing and Usage Please ensure that your Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use. In order to obtain the maximum protection, all the clothing required in Appendix L (Chapter III, Article 2) to the FIA International Sporting Code should be used. Wearers are warned of the particular vulnerability of the neck, wrists, and ankles.  The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing. The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap. The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist. Maintenance of Chillout Pro Sport Underlayers Chillout Pro Sport flame resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care.  Drivers should replace any and all items as soon as they show signs of wear. Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time.  Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials. Embroidery/Labels on Chillout Pro Sport Underlayers Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer. Cleaning/Maintenance of Chillout Pro Sport Underlayers The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments. EEC Certification/Guarantee of Chillout Pro Sport Underlayers Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.

CMS Performance Sub Strap Mount for Corvette C8 This Mount Fits All Variants of the Following Cars: Chevrolet Corvette C8  Chevrolet Corvette C8 Z51 Chevrolet Corvette C8 Z06 Chevrolet Corvette C8 ZR-1 The Best Way to Mount Harness Lap and Sub Belts in Your C8 Corvette The CMS Performance Sub Strap Mount is designed to be installed and used with your factory seats, giving you strong, secure mounting points for racing harness sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap Mount provides an extremely strong structure to which you can wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap Mount Details Manufacturer: CMS Performance Manufacturer Part Number: Harninstall-C8 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for GT350/GT350R/S550 This Mount Fits All Variants of the Following Cars: Ford Performance Shelby GT350 (2015-2020) Ford Performance Shelby GT350R (2016-2020) Ford Performance Shelby GT500 (2021+) Ford S550 Mustang GT (2015-2023) The Best Way to Mount Harness Lap and Sub Belts in Your Shelby Mustang The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Ford Performance seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original Ford mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-003 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for BMW This Mount Fits All Sub-Models Of Current BMW Cars The Best Way to Mount Harness Lap and Sub Belts in Your BMW  The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory BMW seats, giving you strong, secure mounting points for your racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original BMW mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-001 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Harness Install Kit For Gen 6 Camaro This Product Fits The Following Cars: Chevrolet Camaro Coupe, all (2016+) Quick, Easy Installation of Harness Lap Belts in the Gen 6 Camaro The CMS Performance Harness Install Kit for the Gen 6 Camaro provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your Gen 6 Camaro. Each CMS Performance Gen 6 Camaro Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance Gen 6 Camaro Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the Gen 6 Camaro, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the Gen 6 Camaro without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price! CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-G6C Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, manufactured, and powder coated by CMS Performance in the USA This product is intended for off-road use only.

CMS Performance Harness Install Kit For C7 Corvette This Product Fits The Following Cars: Chevrolet Corvette Stingray & Z51, C7 (2014-2019) Chevrolet Corvette Z06, C7 (2015-2019) Quick and Easy Installation of Harness Lap Belts in the C7 Corvette The CMS Performance Harness Install Kit for the C7 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C7 Corvette. Each CMS Performance C7 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C7 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the C7 Corvette, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C7 Corvette without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price! CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-C7 Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, manufactured, and powder coated by CMS Performance in the USA This product is intended for off-road use only.

CMS Performance Sub Strap Mount for Porsche Lightweight Carbon Bucket Seats This Product Fits the Following Cars: 992 GT3/GT3RS 991.1 & 991.2 GT3/GT3RS 991.2 GT2RS 981 Cayman GT4 718 Cayman GT4 718 Cayman GT4RS The Best Way to Install Sub Straps in your Porsche The CMS Performance Sub Strap Mount is a must-have for Porsche GT2RS, GT3/GT3RS, and GT4 owners using five-, six-, or seven-point harnesses with the factory CFRP Full Bucket Seats (also called Light Weight Bucket seats). Designed to easily bolt in using existing seat hardware without having to fully remove the seats from the car, the CMS Performance Sub Strap Mount properly anchors your harness anti-submarine straps ("sub straps") to your seat base. The CMS Performance Sub Strap Mount fits the driver- and/or passenger-side seats. See installation instructions here Proudly Designed and Built in America CMS Performance Sub Strap Mounts are designed, manufactured, and powder-coated entirely in-house in the USA. Made of solid carbon steel while only weighing 1.4 lbs (625g), there's not a stronger, more affordable solution available. CMS Sub Strap Mounts allow full seat adjustment, fore/aft and up/down, while maintaining the ideal sub strap angle to your body for maximum safety. CMS Performance Sub Strap Mount Details Solid steel construction for maximum safety Allows full fore/aft and up/down seat adjustment Powder-coated satin black standard; several Porsche colors available in the drop-down above! Fits driver or passenger seat (Porsche LWB only) Simple to install Compatible with OEM seat belt and airbag hardware

CMS Performance Roll Bar For BMW M8 Coupe (F92) This Roll Bar Fits The Following Cars: BMW M8 Coupe only, F92 (2020-2024) Does not fit BMW M8 Convertible (F91) or Sedan (F93) THE ULTIMATE ROLL BAR FOR THE MIGHTY M8 The CMS Performance Roll Bar for the BMW M8 Coupe is a newest addition to their incredibly popular line of custom-designed bolt-in roll bars. Constructed from high-strength Docol R8 tubing, the CMS Performance Roll Bar for the BMW M8 takes safety, rigidity, and strength to another level. This is the strongest, highest quality bolt-in roll bar on the market for the BMW M8, period. In designing and building every CMS Performance roll bar, structural rigidity and impact protection are always their primary goals. That's why every CMS Performance roll bar is fully 360o TIG welded tubing made from 1.75-inch diameter Docol R8 Advanced High-Strength Steel. CMS is the only roll bar manufacturer to employ this modern material. The support tubing is Docol R8 as well, and the mounting surfaces are machined from solid steel plate. CMS Performance tailors the CMS Performance Roll Bar for the BMW M8 Coupe to take full advantage of the strongest chassis mounting points in the M8. The main roll hoop is X-braced with a single tube cross-bar providing lateral strength that's also used for mounting racing harness shoulder straps. ATTENTION TO DETAIL IS THE HALLMARK OF CMS PERFORMANCE The cross-bar on the CMS Performance BMW M8 Roll Bar is designed to let you attach your racing harness shoulder straps at the proper angle (0° to -20° front-to-back) and distance relative to the driver and passenger, regardless of seat position. The CMS Performance Roll Bar takes advantage of our use of high-strength steel to keep your rear view unobstructed by the added bracing other roll bars require due to the use of inferior materials. CMS Performance ties the main roll hoop and rear kickers together to form an extremely rigid cage structure, designed to attach to the strongest available chassis mounting points. This also adds rigidity to the M8 chassis. The rear kickers are a two-piece design using CNC-machined interlocking joints with double fasteners, making them incredibly strong while also being a breeze to install (typical one-piece designs can be a nightmare to install). BUILT LIKE A TANK, FINISHED LIKE A BMW Designed using the same guidelines as a full racing roll cage and fully 360o TIG welded by expert chassis fabricators and master welders, the CMS Performance Roll Bar for the BMW M8 is unsurpassed in quality, durability, and structural integrity. Each roll bar is professionally powder-coated in-house to guarantee fit and finish no other manufacturer can match. This makes it easy for CMS Performance to offer powder coat colors matched to BMW's OEM paint colors for a truly customized aesthetic1. Powder coating any color you choose is included in the price of your CMS Performance roll bar. DEMAND THE ABSOLUTE BEST Thoughtful engineering and design, superior materials, masterful fabrication, and beautifully customized finishing. That's the CMS Performance way of doing things. Backed by Discovery Parts legendary customer service, it all adds up to this: you can pay more for a roll bar, but you can only get the best from CMS Performance. ADD PREMIUM RACING HARNESSES TO YOUR BMW You can add four-point racing harnesses from Sparco ,Sabelt, or Schroth. These harnesses are an ideal safety upgrade from traditional three-point seat belts, designed for your BMW M8 seats (which do not have factory slots in the lower seat cushions for six-point harness sub-straps to pass through). Custom Installation Instructions Are Coming Soon! EASY INSTALLATION TAKES THE HEADACHE OUT OF ROLL BARS At Discovery Parts, we've been through more than a few wrestling matches installing bolt-in roll bars in street cars. Fortunately, we found the CMS Performance Roll Bar for the BMW M8 to be a lot less frustrating to install. We hesitate to go so far as to say it's easy, but we'll say it isn't hard if you have a friend and some basic tools. CMS PERFORMANCE BMW M8 ROLL BAR DETAILS: Manufacturer: CMS Performance Manufacturer Part: CPRB-F92 Materials: Docol R8 Advanced High-Strength Steel; steel plate gussets. Construction: Full-penetration 360o TIG welded; one-piece gusseted main hoop and three-piece kicker; high-strength double-bolted interlocking roll bar joints and American-made Grade 8 hardware. CNC-cut precision mounting plates Full seat travel with any seat Detailed installation instructions & all necessary hardware for a seamless installation This product is intended for off-road use only. 1 Note: CMS Performance powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car.

Chillout Remote Control For AirCon Helmet Cooler **Designed for the AirCon Helmet Cooler System only** Featuring a 10-foot cord and color digital display, this dash-mountable Chillout Remote Control is designed to turn your AirCon Helmet Cooler on and off as well as adjust the temperature from anywhere in your vehicle. This is a must-have addition if you're mounting your Chillout AirCon System in an out-of-reach area of your vehicle like the trunk or rear seat area. CHILLOUT REMOTE CONTROL (AIRCON) DETAILS Manufacturer: Chillout Systems Manufacturer part no.: CO-RCAC1 Weight: 5 oz. Dimensions: 2.5"L x 1.5"W x 0.5"H Cord length: 10 feet REMOTE CONTROL INCLUDES Remote control unit 10 foot cord

Sparco Best Driver Ever Hat Are you the Best Driver Ever? This Sparco hat let’s everyone know. The Sparco Best Driver hat features the famous Sparco logo sewn on the left side with the “Best Driver Ever” embroidered front and center. The Best Driver hat is one size fits all with an adjustable back. Available in black or navy. Best Driver Ever white embriodery Classic Sparco logo on the left side Black or Navy

Paragon Ignite Short Sleeve Top The Paragon Ignite top is Paragon’s flame-retardant option for keeping your core cool in the most intense racing environments. The Ignite Short Sleeve Top is made from a 4.8 oz. Modacrylic/FR Rayon blend that has excellent quick-drying qualities. It features double the sewn-in coolant tubing compared to a typical cooling garment, giving you a lot of tubing covering your core. Available in Small through XXL with a true-to-size fit, the Paragon Ignite Short Sleeve Top has either right- or left-exit tubing to suit your driver cooling setup. Paragon offers the option to add a hood to the Paragon Ignite top for extra cooling to the head. The Paragon Ignite hood is made from the same material as the Paragon Ignite Short Sleeve Top for a seamless connection. Compatible with the full line of Paragon cooling systems and accessories. If you have ever wanted more cooling, the Paragon Ignite series is for you. Paragon Ignite Pro FR Cooling Shirt Details Manufacturer: Paragon Flame resistance rating: none Tubing exit: choose left- or right-exit Construction: Modacrylic/FR Rayon blend for superior moisture wicking Anti-microbial: Ag47 protection Double the tubing of standard cooling shirt Won’t shrink, pick, or fade Extra length Clean seams for all-day comfort Machine wash, machine dry

Paragon Drain Kit Paragon’s Drain Kit is the ultimate accessory for draining water from Paragon cooling garments, hose sets, coolers, and bags. The Paragon Drain Kit includes two male connectors and two female connectors.

Paragon Blower Air Filter Screen Paragon’s Blower Air Filter Screen is a metal screen perfectly sized for the Paragon 240 CFM blower . The Blower Air Filter Screen helps keep large debris from entering the blower. The Paragon Blower Air Filter Screen slots perfectly into the intake side of your Paragon blower with no appreciable effect on airflow.