New products

Paragon 1.5" Air Supply Hose (10 Feet) Paragon’s 1.5” diameter x 10’ length Air Hose is designed to work with Paragon Viking Pro coolers, Viking Pro Bundles, and Air Blower Bundles. At 1.5” diameter, the Paragon Air Hose is small and flexible enough to route to your helmet without any necessary weight, giving you great head cooling while aiding in keeping fog off your visor. Paragon 1.5" Air Supply Hose Details Manufacturer: Paragon Manufacturer part no.: 02-45000 Hose OD: 1.5" Hose length: 10 feet Weight: 2 lbs.

Paragon Viking Cooler Mounting Tray Strap Paragon’s Viking Tray Strap is designed exclusively for use with Paragon’s Viking Coolers and Viking Mounting Trays. The Paragon Viking Tray Strap's unique design allows access to the interior of the cooler without having to remove the cooler from the mounting tray. Two straps are needed per Viking Cooler/Viking Tray. Fits either the 12L or 18L Paragon Viking cooler mounting tray.

Paragon Arctic Air Cooling Cylinder Paragon’s Arctic Air Cylinder is designed to be used in conjunction with the Paragon Viking Cooler, Paragon Cooling Water Y-Hose, and Paragon 1.5" Air Hose to allow chilled air to flow through your helmet. The Arctic Air Cylinder circulates chilled water internally, cooling and dehumidifying the passing air before it reaches your helmet. This keeps your head significantly cooler and helps keep your visor fog-free. The Paragon Arctic Air Cooling Cylinder is light weight and compact at 14 inches in length (not including the supply/return tubing pigtails) and weighing only 3 lbs. The Paragon Arctic Air Cooling Cylinder Details Manufacturer: Paragon Manufacturer part no.: 05-59000 Weight: 3 lbs. Length (cooling cylinder): 14 in. Inlet diameter: 2.0 in. Outlet diameter: 1.5 in.

Paragon Guardian Water Y-Hose Set Paragon’s innovative Guardian Water Supply/Return Y-Hose Set is designed to simultaneously run cooling water to two separate cooling garments. At 8 feet in overall length, the Guardian Y-Hose is the ideal length to suit most applications, although each of the three "legs" can easily be shortened to customize fit. The Paragon Guardian Y-Hose is insulated to keep your cooling garments supplied with icy cold water from a Paragon Viking. Arctic Wolf, or Arctic Fox cooler. The supply side of the Paragon Guardian Water Supply Hose delivers cooling water to the tubing inlets of your garments, while the return side of the hose set returns water warmed by body heat back to the cooler to be re-chilled and recirculated. Foam insulation acts as a thermal barrier to properly maintain the temperature of the water being supplied to your cooling garments. Paragon Guardian male connectors at the cooler end of the hose set are designed for emergency release, allowing you to easily disconnect with a quick pull on the hose set or garment. Paragon Guardian Supply Y-Hose Details Manufacturer: Paragon Overall length: 8 feet (2.4 meters) "Y" length (each branch): 1.5 feet (0.5 meter) Weight: 2 lbs. (0.9 kg)

Paragon Arctic Wolf Wired Bag Cooler Paragon’s Arctic Wolf Wired Cooler Bag is a cooling bag engineered to be plugged directly to your car's 12V electrical system. Hard-wire it or run it to a cigarette lighter outlet and have endless power with one of the most versatile portable cooling bags on the market. The Arctic Wolf  Cooler Bag contains a heavy-duty bladder housing a robust 12V pump and enough capacity for plenty of ice and cooling water. The front-exit Guardian bulkhead connectors are Paragon’s emergency-release option, allowing the driver to easily disconnect with a quick pull on the connected hose set. The Arctic Wolf Cooler Bag is available with either a 6L or 10L (1.6- or 2.6-gallon) capacity, and it works seamlessly with most cool suit brands. Paragon Arctic Wolf Wired Bag Cooler Details Manufacturer: Paragon Manufacturer part nos.: 10-24000 (6L) or 20-24000 (10L) Fluid pump: 12V high-capacity Power source: 12V wired Weight: 4 lbs. Dimensions in inches: 16x12x8 (6L) or 18x14x8 (10L) Developed for use in all types of racing, the Paragon Arctic Wolf Wired Bag Cooler provides a driver with a full cooling alternative in race cars with limited space or no place to mount a standard hard-sided cooler. The Paragon Arctic Wold Wired Bag Cooler provides the same superior driver cooling as Paragon's legendary fixed-cooler systems, keeping you cool and mentally alert right through those final laps when heat fatigue and dehydration are at their worst.

Paragon Pro Cooling Shirt The Paragon Pro is the amped-up version of Paragon’s cotton cooling shirt and includes double the tubing when compared to the standard Paragon top. The Paragon Pro cooling top is the premier choice when prioritizing cooling capacity over ice retention. The garment is constructed of 6.1 oz., 100% sustainably-sourced ring spun cotton and includes an incredible amount of tubing to cover your core, keeping you cool in the most intense racing environments. Available in sizes Small - 4XL with a true-to-size fit and right- or left-exit tubing. Featuring double the tubing of their standard shirt for more cooling, the new Paragon Pro cooling shirt takes advantage of Paragon's race-tested tubing and sewing methods. The new cotton Paragon Pro cooling shirt is comfortable, rugged and easy-to-use with twice the cooling.  The new Paragon Pro cooling shirt is compatible with all Paragon cooling systems and accessories -- just plug in and cool off! If you've ever wanted more cooling, the Paragon Pro series is perfect for you. Paragon Pro Cooling Shirt Details Manufacturer: Paragon Construction: 100% ring spun sustainably-sourced 6.2 oz. cotton Garment care: machine wash, machine dry Clean seams for increased comfort Double the tubing of a standard cooling shirt Won’t shrink, pick or fade Extra length

Paragon Viking 12V Cooler Paragon’s Viking Cooler was designed to be your ultimate companion for beating the heat! The Viking Cooler is built to be durable and efficient with its 12-volt pump providing constant circulation of cold water through Paragon cooling garments. The side exit Guardian bulkhead connectors are Paragon’s emergency release option allowing you to easily disconnect with a quick pull on the connected hose set. The Paragon Viking Cooler is available in either 12L or 18L capacity and works seamlessly with most cooling garment brands.  The Paragon Viking Cooler is designed for those racing applications that have space for a fixed-mounted cooler for longer races. Perfect for road racing, circle track, drags and many other racing types, it's a favorite among NASA, SCCA, and PCA drivers! The Viking Cooler keeps you cool and alert so you feel your best in the waning laps of a race, when heat is a big factor in fatigue and loss of focus. Plus, you can stay cool waiting in the pits or on the grid. Paragon Viking Cooler Dimensions 12 Liter: 7 lbs, 16" x 10" x 12" 18 Liter: 9 lbs, 17" x 11" x 14"

Paragon Cooling Water Shirt The Paragon Cooling Water Shirt is designed for optimum performance and cooling efficiency under the harshest, hottest racing conditions. Made from 6.1 oz, 100% sustainably-sourced ring spun cotton, the Paragon Cooling Water Shirt includes ample tubing to cover your core, keeping you cool during the most intense race laps. Available in sizes XXS through XXXXL with a true-to-size fit, black or white in color, and right- or left-exit tubing connectors. A fantastic Paragon innovation is the option to add a Cooling Hood to the Paragon Cooling Water Shirt, delivering cooling water to your head as well as your core. The Paragon Cooling Hood is made from the same high-quality material as the shirt for a seamless connection. PAIR WITH A VIKING OR ARCTIC SYSTEM The Paragon Cooling Water Shirt paired with a Viking System or Arctic Bag System (each sold separately) circulates ice-cooled water over the wearer's torso, keeping you comfortable and focused especially during those hot, late laps when heat fatigue can easily set in.  The Paragon Cooling Water Shirt also connects easily to any cooling system with a quick-disconnect Paragon Guardian insulated hose (sold separately). Advanced moisture-wicking properties, antimicrobial protection, and “clean seam” tubing sewn into the interior of the Paragon Cooling Water Shirt keeps the driver dry and comfortable. Paragon's patented non-kink tubing ensures consistent, continual cooling water flow. Paragon Cooling Water Shirts are easy to care for with no special laundering needed. Just machine wash and hang to dry. This shirt won’t pick, fade, or shrink. DETAILS Manufacturer: Paragon Pro Sizes: XXS to XXXL Colors: Black or White Tubing exit: Left or Right Material: 6.1 oz. ring spun 100% cotton Optional Cooling Hood

Paragon Guardian Hose Connector Paragon’s Guardian Male Connector is a replacement for any existing 1/4” or 5/16" Guardian Connector used on Paragon cooling garments and Guardian water hose sets. The Guardian Male Connector functions as a dry-break emergency release, allowing you to easily disconnect from your cooling system with a quick pull on your water hose set or connected garment. Compatible With Paragon, Coolshirt, Momo, and F.A.S.T. The Paragon Guardian Male Connector is compatible with female connectors used by Paragon, Coolshirt, Momo, and F.A.S.T. This means that, no matter what brand of driver cooling system you have, a Paragon cooling shirt will work with it because the shirt has two Paragon Guardian Male Connectors (inlet/supply and outlet/return) If you own a Momo or F.A.S.T. cooling shirt and want to use it with a Paragon system, simply purchase two of these Guardian male connectors, snip off the connectors on your shirt, and replace them with the Guardians. That's it! Paragon Guardian Male Connector Details Manufacturer: Paragon Connector type: male Barbed-end size: regular 1/4" (6mm) or large 5/16" (8mm) Universal dry-break connector Priced/sold individually

Paragon Guardian Water Hose Set Paragon’s innovative Guardian Water Supply/Return Hose Set is designed for efficiency and durability. The Guardian Hose is insulated to keep your cooling garment supplied with icy cold water from a Paragon Viking or Arctic Fox cooler. The supply side of the Paragon Guardian Water Supply Hose delivers cooling water to the tubing inlet of your garment, while the return side of the hose set returns water warmed by body heat back to the cooler to be re-chilled and recirculated. Foam insulation acts as a thermal barrier to properly maintain the temperature of the water being supplied to your cooling garment. Paragon Guardian connectors on the hose set are designed for emergency release, allowing you to easily disconnect with a quick pull on the hose set or garment. Paragon Guardian Supply Hose Lengths 4 feet (2 lbs.) 8 feet (2 lbs.) 12 feet (3 lbs.) 20 feet (4 lbs.)

Racing Optics (X-Stack) - Impact Helmet Shields Racing Optics has the most optically advanced tear-off technology. 10 layer "distortion free" laminated tear-off system for many Impact helmets. Protect your Impact Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches. Racing Optics is a laminated tear-off solution for dirt and pavement forms of racing eliminating the need to apply individual tear-offs. Racing Optics has the most optically advanced tear-off technology. 10 layer "distortion free" laminated tear-off system for many Impact shields. Protect your Impact Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches. For racers who prefer thinner tear-offs, Racing Optics is available in X Stack (10 per stack) 2 mil with patterns specific to many Impact helmets. Each sleeve comes with three stacks of 10 Racing Optics. (total of 30) Racing Optics (X-Stack) - Impact Helmets Details: Qty in one stack: 10 Thickness: 2 mil Stacks in one package: 3 Post centers: 12 1/8" Shape: Banana Racing Optics (X-Stack) - Impact Helmets Fitment Guide: Bell RS7 Bell HP7 SKU: 10237C

Paragon Viking Cooler Mounting Tray Paragon’s Viking Cooler Mounting Tray is designed to provide a customized mounting option with protection for Paragon’s Viking and Viking Pro driver cooling systems. The Paragon Viking Cooler Mounting Tray includes two Viking tray straps that secure the cooler while allowing access to the interior without having to remove the cooler from the tray. Made from a single sheet of steel and powder-coated black for durability. The Viking Cooler Mounting Tray is available to fit either the 12L or 18L Paragon Viking cooler. Paragon Viking Cooler Mounting Tray Dimensions Fits 18L cooler: 4 lbs., 16" x 10" x 6" Fits 12L cooler: 3 lbs., 14" x 9" x 4"

Paragon Air Blower Bundle Paragon’s Air Blower Bundle is assembled as a complete, all-in-one kit. The Paragon Air Blower Bundle is perfect when you want to bring fresh air into your helmet, and includes all the necessary Paragon products to connect a NACA duct inlet to your helmet. The Paragon Air Blower Bundle is light weight and compact, weighing only 6 lbs. total. Click Here for Installation Instructions The Paragon Air Blower Bundle Includes: Blower Air Filter Blower Air Filter Screen 1.25” Air Hose (10ft) 3” Air Hose (5ft) 240 CFM Blower Angled Helmet Fitting 4” Blower Hose Fitting 4” Blower Filter Housing Fitting

Paragon Defense Solution 16 Oz. Paragon Defense Solution enhances cooler, garment, and hose performance in your driver cooling system by defending against mold and bacteria growth. Paragon Defense Solution is formulated to safeguard your cooling investments against mold, mildew, and harmful bacteria that cause reduced water flow and musty odors. Paragon Defense Solution is non-toxic, biodegradable, and environmentally friendly. It's also compatible with non-Paragon ice water-based coolers. This non-toxic, biodegradable solution contains a fungicide that is safe to use in all Paragon cooling systems. Regular use of Paragon Defense Solution will not only help keep your system clean, it will also improve the performance and life of your system's fluid pump. Use 2 oz. of additive every time your driver cooling system is used (or 6 oz. for the large, multi-person pit cooling systems).

Paragon Guardian Female Hose PARAGON GUARDIAN CONNECTOR FEATURES 1/4" or 5/16" connector that work with your Paragon Viking system as well as others. Sold individually, you'll need two to adapt a garment properly. SYSTEM COMPATIBILITY (Paragon/Coolshirt/Momo/F.A.S.T.): Paragon’s Guardian Connector is offered as a replacement for existing 1/4” or 5/16" Guardian Connectors used on non-Paragon branded hose sets, as well as all Paragon Hose Sets. The Guardian Connectors are Paragon’s emergency release option allowing an easy disconnect when a quick pull motion is applied to the connected garment.

Paragon Guardian Female Bulkhead Connector Paragon’s Guardian Female Bulkhead Connector is available as a replacement for a damaged female Guardian Bulkhead Connector on any Paragon Viking, Viking Pro, or Viking Pro Dual cooler, as well as Arctic Wolf, Arctic Wolf Pro, Arctic Fox and Arctic Fox Pro cooler bags. The Guardian Female Bulkhead Connector is Paragon’s emergency release connector option, allowing easy disconnection from your cooling system with a quick pull on the connected hose set or cooling garment. Priced/sold individually. Paragon Guardian Female Bulkhead Connector Details Manufacturer: Paragon Emergency release: yes Replaces broken fitting on your Paragon Viking cooler or cooler bag Sold individually