Stilo ST5 Helmet Shields
Stilo Stilo ST5 Helmet Shields from $143.95
Stilo Anti-Fog/Anti-Scratch Visor for the ST5 Helmet Stilo ST5 visors fit all Stilo SA2020, SA2015, FIA 8859/8860 non-ABP model helmets. Stilo visors are available in over 10 different colors in different levels of gradient to make sure you have the perfect shield for every race condition. From the Stilo dark smoke to a selection of multiple iridiums, Stilo ST5 visors are a great way to ensure your best vision and lap time. Stilo ST5 GT Visor Part Number Chart: STI-YA0800 ST5 Clear Visor STI-YA0801 ST5 Smoked medium visor STI-YA0802 ST5 Smoked dark visor STI-YA0803 ST5 Mirror medium visor STI-YA0804 ST5 Mirror dark visor STI-YA0805 ST5 Iridium blue medium visor STI-YA0806 ST5 Iridium blue dark visor STI-YA0807.2 ST5 Iridium red medium visor STI-YA0808 ST5 Iridium red dark visor STI-YA0809.2 ST5 Iridium yellow medium visor - Not FIA Certified STI-YA0810 ST5 Iridium yellow dark visor - Not FIA Certified STI-YA0813 ST5 Amber visor - Not FIA Certified STI-YA0814 ST5 Clear double glazed visor - Dirt / Offroad Friendly STI-YA0815 ST5 Clear double glazed visor - Not FIA Certified STI-YA0816 ST5 Sun screen short visor STI-YA0821 ST5 Visor sun strip blocker STI-YA0817 ST5 Visor screw kit STI-YA0818 ST5 Visor locking pin replacement STI-YA0851 ST5 Clear Anti-Scratch No Anti-Fog - Dirt / Offroad Friendly High quality, Anti-fog visors shaped for the Stilo ST5 GT helmets. The Stilo ST5 series is unique in that the shield lock is located in the center position of the shield. The shield lock is released by squeezing the outboard sides together and that will then release it from the mount stud that is located in the center of the helmet. The reason for this is to "clean-up" the sides of the helmet where a side impact in a head containment seat may grab parts of the helmet. All Stilo ST5 shilds have the center release mechanism installed on it.All Stilo ST5 shields are treated with an anti-fog treatment and they do require special care. The best result we have by far is the Stilo Visor cleaner. Liberally spray the outside of the visor with the cleaner, and wipe in a single swipe with a micro fiber towel until clean and dry. If fingerprints or dirt remain, repeat as needed. A back and forth wiping motion will tend to leave lint from the rag on the visor, so the single pass works best. Repeat if necessary, but usually one pass works great.Stilo Visor Care: Do not use Windex or any glass cleaner containing ammonia, as this can harm the anti-scratch coating on the outside of the visor, and the anti-fog coating on the inside of the visor. This is the official Stilo Visor Cleaner.
Chillout Systems Insulated Coolant Hose
Chillout Systems Chillout Systems Insulated Coolant Hose from $140.00
Chillout Systems Insulated Coolant Hose The Chillout Hose is insulated liquid-transfer tubes encased in an ultra-durable, tear-resistant fabric shield. Six to ten feet of hose that connects your cooling garment to the driver cooling unit with fittings for a consistent flow cycle. Hose too long for your set-up? Solution: cut hose to desired length. Our hoses comes with an extra supply of matching shrink wrap for a flawless, durable, clean look. CHILLOUT INSULATED COOLANT HOSE FEATURES The 10-Foot hose includes additional heat shrink tubing for custom sizing while maintaining a finished look. Male connectors, two pieces. Female dual-prong connector to connect cooler, one piece Can be connected to other hoses to extend length (including Y connector). Double-Layer Insulation: one layer to protect the hose, a second to keep your coolant cool and efficient.
OMP Racing Trolley Gear bags
OMP OMP Racing Trolley Gear bags from $139.97
OMP Racing Trolley Born in 1973 in Genoa (Italy) as a young, innovative startup, OMP Racing is now a main brand of world leading Racing Force Group, along with Bell Racing Helmets. OMP is a world leader in the engineering, designing and manufacturing racing safety equipment for race car drivers (soft goods) and performance/safety parts (hard parts) for race cars.OMP is one of a very few industry suppliers in the world able to offer a complete range of performance driven products dedicated to race car and driver safety with over 2,000 products in its catalog with the majority homologated to Industry standards including FIA, CIK-FIA, SFI and Snell.Working with component manufacturers and material suppliers, OMP has created and implemented an effective safety management structure to assure product quality and service. OMP is ISO 9001:2008 since 1999 and ISO 9001:2015 since 2017.OMP's current most notorious partnerships include Mercedes-AMG Petronas Formula One Team, Williams Racing, Toyota Gazoo Racing, Hyundai Motorsport, Ferrari, Lamborghini Squadra Corse, FIA Official Supplier and IMSA Official Partner.OMP RACING TROLLEY FEATURES Lightweight and durable fabric Double closure with padlock-ready zipper Resistant cargo wheels Double handle on front and practical upper handle Multiple internal storage compartment and pockets Rigid bottom with standing support Coverable air net insert Expansion system to gain more capacity Racing suit-inspired design insert 
OMP First Nomex Gloves
OMP OMP First Nomex Gloves $139.00
OMP First Racing Gloves FIA 8856-2018 HOMOLOGATED Sleek and lightweight, OMP's re-designed First Racing Gloves offer the comfortable design and features of top end models at a fraction of the price. External stitching (typically available only on the most expensive racing gloves) and a pre-curved shape vastly improve fit and comfort while reducing hand fatigue. The First printed silicon-rubber palms provide maximum grip with minimum bulk. An elastic wrist keeps the gloves fitted snug while being easy to put on/take off, and the straight cut gauntlet maintains a clean look. The OMP First Evo's combination of top-end features and budget friendliness has made these the new staff favorite racing gloves at any price!   OMP FIRST NOMEX GLOVE CONSTRUCTION Palm has fire-retardant, silicon rubber inserts for optimal grip and sensitivity. Straight cut on the gauntlet and elastic band on the wrists. External seams for maximum comfort. Pre-curved design for optimal comfort.   OMP FIRST NOMEX GLOVE PROTECTION Certified to the new FIA 8856-2018 homologation standard.   Extended cuff length in accordance with new FIA homologation standards for maximum protection against fire and heat.
Sparco RW-4 Nomex Pants White Image
Sparco Sparco RW-4 Nomex Pants $139.00
Sparco RW-4 Nomex Pants   The RW-4 line of undergarments are designed to provide both comfort and protection. The RW-4 features a soft-touch interlock fabric.  The undershirts and underpants are available in sizes Small through XX-Large. The RW-4 undershirts and underpants are regular fit.  The RW-4 line is FIA 8856-2018 approved. SPARCO RW-4 NOMEX UNDERLAYER PANT TECHNOLOGY Soft and comfortable Regular Fit FIA 8856-2018 Approved
Sparco Martini Racing Land Nomex Glove
Sparco Sparco Martini Racing Land Nomex Glove $139.00
Sparco Martini Racing Land Nomex Glove In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best drivers in the world. Now, with this renewed partnership, fans of the Martini Racing historical livery have access to reproductions of the original Sparco products. All reproductions have been updated with the newest Sparco technologies and carry current FIA homologations. The Sparco Martini Racing Land glove provides excellent protection and feedback. The classic design features Martini Racing and Sparco logos in “period correct” embroidered patches. The palm features an ergonomic design with reinforced stitching that conforms to the hand’s position. The glove has anti-slip suede fingertips and provide grip and feedback. The elastic wrist and wide range of sizes helps ensure proper fitment. Colors: Navy or Red. The Martini Racing Land is FIA approved. SPARCO MARTINI LAND RACING GLOVE TECHNOLOGY Period-correct embroidered Martini Racing patches Ergonomic palm design with reinforced stitching conforms to the hand’s position Suede grip for finger tips and palm Elastic wrist support FIA approved
Paragon Li-Ion Battery for Arctic Wolf/Fox
Paragon Paragon Li-Ion Battery for Arctic Wolf/Fox $134.99
Paragon 4.4AH Li-Ion Arctic Wolf/Fox Battery Paragon’s Arctic Wolf/Fox Battery is a 4.4 Amp-hour lithium-ion battery designed for use with your Paragon Arctic Wolf or Arctic Fox Cooler Bag. The Arctic Wolf/Fox 7.4V battery provides up to 132 minutes of continuous run time with each full charge. Paragon Arctic Wolf/Fox Battery Charger sold separately. Paragon Li-Ion Battery For Arctic Wolf/Fox Details Manufacturer: Paragon Manufacturer part no.: 02-29400 Battery voltage: 7.4V Battery amp/hours: 4.4 AH Charger included: no Weight: 1 lb.
Alpinestars SP v2 Racing Shoes
Alpinestars Alpinestars SP v2 Racing Shoes from $134.96
Alpinestars SP v2 Racing Shoes The redesigned Alpinestars SP v2 racing shoe is SFI-homologated, with an exceptional new design and premium features in an affordable shoe. Alpinestars newly developed asymmetric lacing system gives the SP v2 a supportive, comfortable closure and customized fit. Laser cut perforations incorporated into this anatomically profiled shoe give it excellent breathability The SP v2 also features Alpinestars exclusive ultra-thin F1-specification sole, with special line-textured grip and improved pedal feel. Alpinestars foot counter features multi-compound construction and ergonomic polypropylene heel counter, which provides support, protection, and stability plus an integrated PU fireproof heel for added safety. ALPINESTARS SP V2 RACE SHOE CONSTRUCTION Main upper constructed from premium suede for optimum durability, comfort and fit Sleek shoe profile developed in Formula 1 to offer optimized performance both in and out of the car Full tongue upper constructed from perforated leather for enhanced ventilation and optimized breathability Asymmetric toe design and traditional lacing plus hidden loops closure system for a precise, secure, personalized fit ALPINESTARS SP V2 RACE SHOE KEY FEATURES Collar padding constructed from nitrile rubber for comfort Lightweight micro-porous padding around the heel and insole enhances comfort FIA/Alpinestars homologation label on the tongue made from fireproof PU film transfer Alpinestars multi-compound heel counter plus integrated PU fireproof heel for comfort Alpinestars exclusive ultra-thin F1-spec sole uses exclusive lightweight rubber textured grip for improved pedal feel  
Alpinestars Tech-1 Start v4 Nomex Gloves
Alpinestars Alpinestars Tech-1 Start v4 Nomex Gloves $134.95
Alpinestars Tech-1 Start v4 Nomex Gloves   Designed with a single upper panel and innovative finger construction, the Tech-1 Start v4 Gloves have been engineered to reduce the excess material in the fingers, as well as the total weight of the glove. ALPINESTARS TECH-1 START V4 CONSTRUCTION AND FEATURES Box cut fingertip construction offers a seamless no-fourchettes design on the ring and middle fingers, resulting in a glove which is anatomically optimized for a confined cockpit. Ergonomically positioned silicon printed zones on palm for enhanced grip. Close-fitting, straight, extended with elasticated wrist for easy entry and a secure fit. Certified to FIA 8856-2018 homologation standard  
-36% sale
Stilo ST5 Short Helmet Shields
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo ST5 Short Helmet Shields $132.95 $206.00
Stilo Anti-Fog/Anti-Scratch Short Visor for the ST5 Helmet Stilo ST5 short visors fit all Stilo SA2020, SA2015, FIA 8859/8860 non-ABP model helmets. Stilo visors are available in over 4 different colors in different levels of gradient to make sure you have the perfect shield for every race condition. From the Stilo dark smoke to a selection of multiple iridiums, Stilo ST5 visors are a great way to ensure your best vision and lap time. Stilo ST5 GT Visor Part Number Chart: YA0854 ST5 Mirror dark visor YA0836 ST5 Iridium blue dark visor YA0837.2 ST5 Iridium red dark visor YA0838 ST5 Iridium yellow dark visor - Not FIA Certified High quality, Anti-fog visors shaped for the Stilo ST5 GT helmets. The Stilo ST5 series is unique in that the shield lock is located in the center position of the shield. The shield lock is released by squeezing the outboard sides together and that will then release it from the mount stud that is located in the center of the helmet. The reason for this is to "clean-up" the sides of the helmet where a side impact in a head containment seat may grab parts of the helmet. All Stilo ST5 shilds have the center release mechanism installed on it.All Stilo ST5 shields are treated with an anti-fog treatment and they do require special care. The best result we have by far is the Stilo Visor cleaner. Liberally spray the outside of the visor with the cleaner, and wipe in a single swipe with a micro fiber towel until clean and dry. If fingerprints or dirt remain, repeat as needed. A back and forth wiping motion will tend to leave lint from the rag on the visor, so the single pass works best. Repeat if necessary, but usually one pass works great.Stilo Visor Care: Do not use Windex or any glass cleaner containing ammonia, as this can harm the anti-scratch coating on the outside of the visor, and the anti-fog coating on the inside of the visor. This is the official Stilo Visor Cleaner.
-32% sale
OMP ONE-S Nomex Gloves Yellow / Black Image
00
DAYS
00
HRS
00
MIN
00
SEC
OMP OMP ONE-S Nomex Gloves $129.95 $189.00
OMP ONE-S Racing Gloves All new graphics and the latest FIA 8856-2018 rating, the restyled OMP One-S Racing Gloves still feature the ultra comfortable pre-curved design and external stitching that has made this model one of our all time best sellers! Thin silicone inserts are printed directly to the palm and re-engineered for improved ergonomics. The diagonal cut gauntlet offers unobstructed performance, while the strap-less design uses an elastic wrist band for increased comfort. Fire retardant precurved top level gloves. Diagonal cuts, elastic band on the wrist. Inserts for better wearing. External seams for maximum comfort, fire retardant antislip silicon rubber palm. OMP ONE S AUTO RACE GLOVE CONSTRUCTION Palm has fire-retardant, silicon rubber inserts proven to give optimal grip and sensitivity. Diagonal cut on the gauntlet and elastic band on the wrists. External seams for maximum comfort. Pre-curved design for optimal comfort. Grip inserts are strategically located in order to decrease bunching. OMP ONE S AUTO RACE GLOVE PROTECTION Certified to the new FIA 8856-2018 homologation standard. Interior is sprayed with latex for improved grip and resistance. Extended cuff length in accordance with new FIA homologation standards for maximum protection against fire and heat.
-19% sale
Alpinestars Tech-1 Race v3 Nomex Gloves
00
DAYS
00
HRS
00
MIN
00
SEC
Alpinestars Alpinestars Tech-1 Race v3 Nomex Gloves $129.95 $159.95
Alpinestars Tech-1 Race v3 Nomex Gloves Clearance Sale going on Now!  Alpinestars continues to lead the market in design and technology.  Offering increased levels of protection from the previous generation, the new Tech-1 Race v3 Glove has many features and benefits of a higher price point glove, such as pre-curved fingers and external palm seams to reduce pressure points.The new Alpinestars Tech-1 Race v3 racing glove has been designed to offer exceptional levels of feel, comfort and performance in an affordable glove. It features inside-stitched seams on all five fingers for superb comfort and durability. Equipped with Alpinestars' open cuff design, the 180° elasticated wrist makes for easy entry in the pits and a secure fit in the car. Additional premium design touches include a silicon surface for improved flexibility and control, and pre-curved fingers to reduce fatigue while driving to maximize performance. ALPINESTARS TECH-1 RACE V3 CONSTRUCTION Flame resistant aramidic fiber main construction is bonded for optimum performance, comfort, and safety. Combination of innovative materials and construction methods resuls in a significant weight reduction. Full-gauntlet single panel top construction for maximum coverage. Extended silicon printing on fingers and palm for improved grip and feel. Pre-curved fingers and palm help reduce fatigue while driving. ALPINESTARS TECH-1 RACE V3 GLOVE PROTECTION Certified to the latest FIA 8856-2018 homologation standard. Extended cuff length in accordance with new FIA standards for maximum protection against fire and heat. ALPINESTARS TECH-1 RACE V3 GLOVE KEY FEATURES Minimal-seam construction for enhanced comfort, feel, and weight-savings. Alpinestars cuff opening design with a 180° elasticated wrist for easy entry/exit and a secure fit. External super-lightweight printed design details for reduced weight.  
FluidLogic Containment Bottle
FluidLogic FluidLogic Containment Bottle from $129.95
FluidLogic Containment Bottle The new WAVE of hydration is here! The Fluidlogic WAVE is a complete hydration system that keeps your drink of choice cold and secure for your entire ride. Magnetic nozzle dock ensures quick one handed hydration with the flick of the wrist.  FLUID LOGIC CONTAINMENT BOTTLE FEATURES Kitchen grade stainless steel is roost and rust resistant.  Quick release bottle mount secures to any roll bar for convenient filling.  Available in 32oz and 64oz capacity for short and long rides  Keeps your drink cold for up to 8 hours  Keep your eyes on the road ahead with quick one-handed megentic operation  Stay hydrated outside your vehicle when parked at your favorite spot Dust resistant silicone bite valve prevents dust and sand from sticking to the bite-valve Insulated dairy-grade tubing keeps your drink cold in route to you     Wide mouth bottle opening makes it easy to add ice to keep your drink cold all day  FLUID LOGIC CONTAINMENT BOTTLE INCLUDES 32oz or 64oz stainless steel bottle Roll bar quick release mount & hardware 7.5ft of Dairy grade insulated draw tube Magnetic draw hose dock Dust & drip resistant silicone bite valve Varying length straps for securing draw tube to roll bar
-33% sale
Alpinestars Race v3 Nomex Fireproof Shirt (Discontinued Colors)
00
DAYS
00
HRS
00
MIN
00
SEC
Alpinestars Alpinestars Race v3 Nomex Fireproof Shirt (Discontinued Colors) $129.00 $189.95
Alpinestars Race v3 Nomex Fireproof Shirt This lightweight Nomex® undergarment gives you exceptional breathability and comfort, along with flame-resistant properties. The Race v3 Series Formula 1 specification tech base layer incorporates a relaxed fit for comfort when wearing under a driving suit. ALPINESTARS RACE V3 NOMEX UNDERLAYER SHIRT CONSTRUCTION Advanced tech base layer with Alpinestars innovative flame-resistant technology incorporating elastane fiber for improved engineered elasticity and high levels of comfort. Stretchable construction under the new homologation standard requirements.  ALPINESTARS RACE V3 NOMEX UNDERLAYER SHIRT PROTECTION  Certified to the new FIA 8856-2018 homologation standard. Lenzing FR® fire-resistant material ALPINESTARS RACE V3 NOMEX UNDERLAYER SHIRT KEY FEATURES Soft-touch textile for feel and enhanced comfort. Lenzing FR® material is a natural viscose fiber with unique thermal insulation and flame resistance properties that help prevent heat stress.
-44% sale
OMP ONE Nomex Shirt black Front Image
00
DAYS
00
HRS
00
MIN
00
SEC
OMP OMP ONE Nomex Shirt $129.00 $229.00
OMP ONE Nomex Top FIA 8856-2018 HOMOLOGATED OMP updated their "ONE" line of Nomex racing undergarments for 2020. The new ultra-lightweight ONE long sleeved crew-neck top is made of a very smooth single layer of soft knit flame-retardant aramid fibers, with ultra-flat anti-rubbing seams for incredible comfort. It features OMP's advanced technology high breathability 3D knitted inserts for maximum cooling in hot conditions. These inserts align with the breathable inserts in OMP's "ONE" range of fire suits and Tecnica Evo suits, making up the OMP Dry System of integrated driver cooling technology. The special 3D inserts on the sides, back of the shoulders, small of the back, and inside the arms allow perspiration to evaporate without sacrificing flame protection. OMP ONE Tops have an athletic cut with increased elasticity to fit smoothly under the driver's fire suit. As such, they are designed to fit a little tight. OMP ONE UNDERLAYER SHIRT FEATURES FIA 8856-2018 Homologation Available in Black or White OMP ONE NOMEX UNDERLAYER SHIRT SIZES XS/S: EU42-46 / US32-36 Medium: EU48-50 / US38-40 Large: EU52-54 / US42-44 XL/2XL: EU56-58 / US46-48 3XL: EU60-64 / US50-54    
Roux Radio - Drink Tube Connector Assembly NASCAR Plug
Roux Helmets Roux Radio - Drink Tube Connector Assembly NASCAR Plug $129.00
Roux Radio / Drink Tube Connector Assembly NASCAR Plug Connecting to the left side of your Roux helmet, the Roux NASCAR radio plug/drink tube connector attaches to your helmet with a slight push and releases quickly by pressing the red fast release push button on the Roux helmet connector assembly. This is the NASCAR protocol (3c) that is used in most older radio systems. The drink tube is open ended to connect to your Longacre Drink Kit, Camelback or any other drink system you may use. The dry-break hidden inside the connector assembly guarantees a no-drip easy connection. Roux Radio / Drink Tube Connector Assembly NASCAR Plug Details: Manufacturer: Roux Manufacturer part number: RXHA12-15 Radio protocol: NASCAR (longer and thinner than your Roux helmet) Coil cord: Yes Dry break included on drink connector: Yes [img-6535-left-large_default]