Recaro Holding GmbH
Recaro Profi SPG Racing Seat
$1,195.00
Recaro Profi SPG Racing Seat
All race drivers want to win. That’s the goal. And winning starts with how you fit in the car and relate ergonomically to its controls. The Recaro Profi SPG racing seat provides optimized body support during high g-force events, keeping you firmly in the right place to do your job. The Recaro Profi SPG also gives you great long term comfort, and it is this combination of comfort and support that gives you a competitive edge in driving performance.
The Profi SPG’s ergonomic S-shaped fiberglass shell fits the natural curve of your spine, providing “built-in” structured lumbar support that protects against spinal compression in high-impact accidents.
Ideal for off-road and rally use, the shell of the Recaro Profi SPG with glass fiber reinforced polymer has been proven many times over and offer superb lateral hold on the race track as well as off-road. Also available in XL version.
RECARO PROFI SPG RACING SEAT DETAILS
FIA 8855-1999 certified and crash tested
RECARO proprietary ergonomics: S-shaped shell with “built-in” lumbar support
RECARO high-integrity fiberglass comfort shell
Aggressive thigh and torso bolstering
Lumbar cushions
Shock-absorbing foam
RECARO friction grip at shoulders
Screw-mounted panels at belt slots
Flame-retardant upholstery
High-quality, durable foam
Suitable for 4, 5, or 6-point harnesses
RECARO PROFI SPG RACING SEAT DIMENSIONS
GiroDisc Racing Brakes & Technologies
Girodisc A2-307 Rear Rotors for Toyota GR Supra
$1,150.00
Girodisc A2-307 Rear Rotors for Toyota GR Supra
FITMENT: Toyota GR Supra (345mm), rear
This Girodisc two-piece rotor set is a direct replacement for the Rear rotors on the Toyota Supra GR. Girodisc two-piece, fully floating rotor assemblies help shed unsprung weight and rotating mass from the Rear axle of the Toyota Supra GR, while being far more durable in track use.
American Made With Specially Formulated Materials
Girodisc rotor rings are machined from a proprietary casting made of high-carbon steel formulated to Girodisc’s specifications. This superior metallurgy results in a rotor that holds up better, and the 72 curved vanes act as a centrifugal pump pulling air in through the hub to effectively cool the rotors under hard use. The two-piece design means the reusable hat which can be attached to new rotor rings (part number D2-307) when the latter need to be replaced.
All major components including the hats, rotor rings, and drive pins are manufactured in-house at the Girodisc facility in Bellingham, WA, from domestically-sourced materials. The hat is made from 6061-T6 aluminum and coated in a black anodized finish. The drive pins are made from a high-strength steel alloy and cadmium-plated for corrosion resistance. All rotors are assembled with spring clips and Belleville washers for race-ready float while also being street-friendly with no noise from loose hardware.
We also recommend replacing them if a crack leads to the edge of the ring.
Sold and priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
GiroDisc Racing Brakes & Technologies
Girodisc A1-307 Front Rotors for Toyota GR Supra
$1,150.00
Girodisc A1-307 Front Rotors for Toyota GR Supra
FITMENT: Toyota GR Supra (348mm), front
This Girodisc two-piece rotor set is a direct replacement for the front rotors on the Toyota Supra GR. Girodisc two-piece, fully floating rotor assemblies help shed unsprung weight and rotating mass from the front axle of the Toyota Supra GR, while being far more durable in track use.
American Made With Specially Formulated Materials
Girodisc rotor rings are machined from a proprietary casting made of high-carbon steel formulated to Girodisc’s specifications. This superior metallurgy results in a rotor that holds up better, and the 72 curved vanes act as a centrifugal pump pulling air in through the hub to effectively cool the rotors under hard use. The two-piece design means the reusable hat which can be attached to new rotor rings (part number D1-307) when the latter need to be replaced.
All major components including the hats, rotor rings, and drive pins are manufactured in-house at the Girodisc facility in Bellingham, WA, from domestically-sourced materials. The hat is made from 6061-T6 aluminum and coated in a black anodized finish. The drive pins are made from a high-strength steel alloy and cadmium-plated for corrosion resistance. All rotors are assembled with spring clips and Belleville washers for race-ready float while also being street-friendly with no noise from loose hardware.
We also recommend replacing them if a crack leads to the edge of the ring.
Sold and priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Sparco S.p.A.
Sparco Pro ADV QRT Racing Seat
$1,129.00
Sparco Pro ADV QRT Racing Seat
The Sparco Pro ADV QRT Racing Seat represents the evolution of one of the most respected head-restraint competition seats in motorsports. Developed through a collaboration between Sparco and the FIA, the Pro ADV QRT was engineered to raise the standard for driver protection, ergonomics, and lightweight performance. The result is a race-proven competition seat that delivers exceptional head containment, advanced impact management, and outstanding driver support.
Building upon the success of the original Pro ADV, the latest Pro ADV QRT incorporates Sparco's patented QRT (Quick Resin Technology) manufacturing process, significantly reducing weight while increasing rigidity and maintaining exceptional strength. The redesigned head restraint geometry improves fitment in modern vehicles with tighter cockpits while preserving the outstanding protection and containment that made the Pro ADV a favorite among professional racers.
The Pro ADV QRT is ideally suited for road racing, endurance racing, time attack, club racing, and high-performance track vehicles where driver safety and lateral support are critical.
Advanced Head and Shoulder Protection
The Pro ADV QRT was specifically designed to enhance driver protection during side impacts and high-speed incidents. Deep shoulder containment and integrated head restraints help stabilize the driver's upper body while reducing head movement during aggressive cornering, braking, and impact events.
The revised head restraint design improves compatibility with smaller cockpit vehicles while maintaining the protection required for professional motorsport competition.
What is Sparco QRT Technology?
Developed at Sparco's OEM Composite Laboratory in Italy, QRT (Quick Resin Technology) utilizes advanced manufacturing methods derived from aerospace engineering. QRT technology creates one of the lightest fiberglass composite racing seat shells available while maintaining exceptional rigidity and durability.
Compared to traditional fiberglass construction, QRT technology reduces overall shell weight by up to 30%, delivering a remarkable strength-to-weight ratio that approaches carbon fiber performance at a significantly lower cost.
Sparco Pro ADV QRT Features
Patented QRT ultra-lightweight fiberglass composite shell
FIA 8855-1999 homologated racing seat
Integrated head restraint and shoulder containment system
Redesigned halo geometry for improved fitment in compact cockpits
Excellent lateral support and driver containment
Special non-slip fabric on shoulders and seat cushion
Fire-retardant upholstery materials
Professional-grade ergonomics for reduced driver fatigue
Designed in cooperation with FIA safety initiatives
Ideal for road racing, endurance racing, club racing, and time attack competition
Driver Fitment
The Sparco Pro ADV QRT is designed to accommodate medium to large drivers and is generally suitable for drivers up to approximately a 35-inch waist. Its optimized shell dimensions provide outstanding support while maintaining compatibility with a wide variety of race car cockpits.
Technical Specifications
Homologation: FIA 8855-1999
Shell Material: QRT Fiberglass Composite
Seat Type: Competition Seat with Integrated Head Restraints
Mounting Type: Side Mount
Harness Compatibility: Multi-Point Racing Harnesses
HANS Compatible: Yes
Upholstery: Fire-Retardant Fabric with Non-Slip Inserts
Why Choose the Sparco Pro ADV QRT?
The Pro ADV QRT delivers one of the best combinations of safety, fitment, and lightweight construction in the Sparco lineup. Its FIA-developed safety features, advanced containment design, and ultra-lightweight QRT shell make it a top choice for racers seeking professional-level protection without compromising comfort or cockpit compatibility.
For drivers who prioritize head protection, lateral support, and race-proven safety, the Sparco Pro ADV QRT remains one of the benchmark competition seats in motorsports.
Pro ADV QRT Dimensions
```
Sparco S.p.A.
Sparco Circuit/Circuit II QRT Racing Seat
$1,129.00
Sparco Circuit / Circuit II QRT Racing Seat
The Sparco Circuit QRT is an ultra-light competition seat specifically designed for circuit use. Made from aramidic fiber-reinforced fiberglass with all-new QRT technology, the Sparco Circuit QRT has an ultra-light shell. The Sparco Circuit QRT includes integrated bolsters to protect the head. This seat can be used with a HANS/FHR device for even greater protection. The ultra-light shell is then wrapped in an impact-absorbing and fire retardant fabric that helps hold the body.
The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear.
The Sparco Circuit QRT is FIA 8855-1999 approved, available in two sizes: Circuit QRT (Standard) and Circuit II QRT (Large).
SPARCO QRT TECHNOLOGY
QRT technology gives an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. QRT technology gives an average weight savings of 30% when compared to standard fiberglass technology. The main benefit is that QRT seats approach weight of carbon fiber seat at the price of a fiberglass composite seat.
SPARCO CIRCUIT TECH
QRT technology – 30% weight savings
Ultra-light AramIdic fiber-reinforced fiberglass shell
Integrated head bolsters for greater safety
HANS device compatible
Fire retardant fabric
FIA approved
The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear.
DETAILS
Manufacturer: Sparco
Manufacturer part number: 008019RNR
Rating: FIA 8855-1999
Mounting: Side
Weight (shell only): 19.7 lbs
HANS Compatible
Ultra-light Aramidic fiber-reinforced fiberglass shell
Integrated head protection
Non-slip fabric for shoulders and bottom cushion
Smooth and slim backrest for high lateral support
Pre-shaped thigh cushion helps separate the driver's legs
Self-extinguishing fabric
DIMENSIONS
GiroDisc Racing Brakes & Technologies
Girodisc A1-268 Front Rotors for Toyota GR Corolla & GR Yaris
$1,100.00
Girodisc A1-268 Front Rotors for Toyota GR Corolla & GR Yaris
FITMENT:
Toyota GR Corolla (2023+), front
Toyota GR Yaris (2020+), front
This Girodisc two-piece rotor set is a direct replacement for the front rotors on the Toyota Corolla GR. Girodisc two-piece, fully floating rotor assemblies help shed unsprung weight and rotating mass from the front axle of the Toyota Corolla GR, while being far more durable in track use.
American Made With Specially Formulated Materials
Girodisc rotor rings are machined from a proprietary casting made of high-carbon steel formulated to Girodisc’s specifications. This superior metallurgy results in a rotor that holds up better, and the 72 curved vanes act as a centrifugal pump pulling air in through the hub to effectively cool the rotors under hard use. The two-piece design means the reusable hat which can be attached to new rotor rings (part number D1-268) when the latter need to be replaced.
All major components including the hats, rotor rings, and drive pins are manufactured in-house at the Girodisc facility in Bellingham, WA, from domestically-sourced materials. The hat is made from 6061-T6 aluminum and coated in a black anodized finish. The drive pins are made from a high-strength steel alloy and cadmium-plated for corrosion resistance. All rotors are assembled with spring clips and Belleville washers for race-ready float while also being street-friendly with no noise from loose hardware.
We also recommend replacing them if a crack leads to the edge of the ring.
Sold and priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
GiroDisc Racing Brakes & Technologies
A1-242 Girodisc 2pc Front Brake Rotors for Corvette Z51 (C8)
$1,100.00
A1-242 Girodisc 2pc Front Brake Rotors for Corvette Z51 (C8)
FITMENT: Chevy Corvette Z51 (C8), Front
The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency.
Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response.
When used with Pagid or PFC performance brake pads and CMS RF-1 brake fluid (available from ), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by class 12.9 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance.
Sold/priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
GiroDisc Racing Brakes & Technologies
A2-242 Girodisc 2pc Rear Brake Rotors (C8 Corvette)
$1,100.00
A2-242 Girodisc 2pc Rear Brake Rotors (C8 Corvette)
Fits Corvette C8
The GiroDisc system is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (also available from Discovery Parts), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Sparco S.p.A.
Sparco Pro 2000 QRT Martini Racing Seat
$1,099.00
Sparco Pro 2000 QRT Martini Racing Seat
SIZE: Medium (up to a 34” waist)
The Sparco Pro 2000 QRT Martini Racing Edition is a limited production seat. It features the Iconic Martini Racing stripes and is available in period correct Navy or Grey. The Sparco Pro 2000 QRT Martini Edition is designed for a medium size driver with a waist size up to 34 inches. The Pro Sparco 2000 QRT Martini Edition is our deepest bolstered seat that gives excellent lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort.
The Sparco Pro 2000 QRT Martini Edition is made with all-new QRT Technology which results in an ultra-light shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Sparco Pro 2000. The Sparco Pro 2000 QRT Martini Edition is a unique FIA 8855-1999 approved seat as it can be bottom mounted in addition to the traditional side mounting. This gives additional installation options.
EVOLUTION OF AN ICON
The Sparco Pro 2000 QRT Martini Edition
The Sparco Pro 2000 QRT is an evolution ofSparco's iconic Pro 2000 seat. The Sparco Pro 2000 QRT has been upgraded with new ergonomics and technology. It is designed for a medium size driver with a waist size up to 34 inches. The Sparco Pro 2000 QRT is our deepest bolstered seat that gives excellent lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort. The Sparco Pro 2000 QRT is made with all-new QRT Technology which results in an ultra-light shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Pro 2000. The Sparco Pro 2000 QRT is FIA approved.
What is Sparco QRT?
Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process based on aerospace technologies.
QRT creates an unparalleled mechanical strength-to-weight ratio, generating the lightest fiberglass composite seat shells currently on the market. In fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point.
TECHNOLOGY
QRT ultra-light fiberglass composite shell
Excellent fitment into small cockpits
Adjustable lumbar cushions
Excellent ergonomics
Fire retardant fabric
FIA 8855-1999 approved
DIMENSIONS
Sparco S.p.A.
Sparco Circuit II QRT (SIM)
$1,050.00
Sparco Circuit II QRT Sim Racing Seat – Maximum Comfort for Serious Sim Racers!
*NON FIA or SFI*
Calling all larger sim racers!
The Sparco Circuit II QRT Sim Racing Seat is here to level up your virtual racing experience. Designed for those who need a little extra room, this seat combines Sparco’s top-notch QRT Technology with unparalleled comfort, so you can dominate the virtual track without sacrificing a shred of performance.
Built with an ultra-light aramidic fiber-reinforced fiberglass shell, the Circuit II QRT is wider, comfier, and tougher than ever before. Whether you’re in the final lap of a marathon sim race or just warming up, this seat’s deep side bolsters and integrated head bolsters will keep you locked in tight. It’s like having a personal pit crew for your sim racing setup!
Why You Need This Sparco Circuit II QRT (SIM) Seat
QRT Technology – Cutting-edge tech for a seat that’s 30% lighter but just as strong as heavier models.
Wider shell for large sim racers – Accommodates drivers with up to a 36” waist comfortably.
Integrated head bolsters – Keeps you safe and supported during intense sim racing battles.
Deep side bolsters for enhanced lateral support – No more sliding around when the action heats up!
Fire retardant, non-slip fabric – Built for long hours of sim racing without any discomfort or slippage.
Comfort Built for Extended Sim Racing Sessions
Whether you’re gunning for the podium in an online tournament or simply cruising through your favorite sim game, the Circuit II QRT has your back—literally. Its wider design provides extra room for larger sim racers, and with its advanced ergonomic construction, you’ll stay comfortable for hours. (No pit stops necessary.)
Sizing Info Sparco Circuit II QRT (SIM)
Large: Fits drivers with up to a 36” waist. Finally, a sim seat for the big dogs!
The QRT Advantage – What Makes It Special?
Sparco’s Quick Resin Technology (QRT) is the future of sim racing seats. Developed in Sparco’s Italian lab, QRT reduces the weight of the seat by 30% compared to traditional models, while still maintaining unbeatable strength. Translation? You’ll feel more connected to your rig and less bogged down by extra weight. Plus, it looks super cool.
Sparco Circuit II QRT (SIM) FAQs
Is this seat compatible with my sim racing rig? Absolutely! The Circuit II QRT is designed to work with most sim racing rigs. Its wide shell and adjustable harness slots mean it’ll fit snugly into your setup.
How durable is the fabric? The fire retardant and non-slip fabric ensures you stay in control during every race. It’s built to withstand even the sweatiest gaming marathons.
Is this seat comfortable for long gaming sessions? Yes! The deep side bolsters and supportive design make it ideal for hours of uninterrupted sim racing without sacrificing comfort.
Ready to Crush Your Next Sim Race?
Upgrade your sim racing experience with the Sparco Circuit II QRT Sim Seat—built for larger drivers, designed for maximum comfort, and engineered to deliver performance. Click ‘Add to Cart’ now and leave your competition in the dust!
Sparco S.p.A.
Sparco Pilot QRT Racing Seat
$1,049.00
Sparco Pilot QRT Racing Seat
The Sparco Pilot QRT Racing Seat was specifically engineered for larger and taller drivers who require the safety, support, and performance of a professional motorsport seat without compromising comfort or fitment. As the widest and tallest composite racing seat in the Sparco lineup, the Pilot QRT delivers exceptional driver accommodation while maintaining FIA-approved safety standards and race-proven performance.
Built using Sparco's patented QRT (Quick Resin Technology) manufacturing process, the Pilot QRT features an ultra-lightweight fiberglass composite shell that provides an outstanding strength-to-weight ratio. Despite its larger dimensions, the Pilot QRT remains remarkably lightweight, making it an ideal choice for racers seeking maximum driver comfort without unnecessary weight penalties.
Integrated head protection, deep side bolsters, and advanced ergonomic shaping provide excellent lateral support and driver containment during high-speed cornering, braking, and impact events. The Pilot QRT is fully compatible with modern HANS devices and multi-point racing harnesses, making it suitable for a wide range of motorsport disciplines.
Designed for Larger Drivers
Finding a racing seat that properly fits larger drivers can be challenging. The Sparco Pilot QRT was developed specifically to solve this problem by offering increased shoulder width, hip room, and overall seat dimensions compared to traditional competition seats.
The result is a racing seat that provides proper support, improved comfort, and enhanced safety for drivers who may not fit comfortably in standard-sized competition seats.
What is Sparco QRT Technology?
Designed and developed at Sparco's OEM Composite Laboratory in Italy, QRT (Quick Resin Technology) is an advanced manufacturing process derived from aerospace engineering. QRT technology produces one of the lightest fiberglass composite racing seat shells available while maintaining exceptional rigidity and strength.
Compared to traditional fiberglass construction methods, QRT technology reduces overall shell weight by up to 30%, delivering performance that approaches carbon fiber construction at a significantly lower cost.
Sparco Pilot QRT Features
Patented QRT ultra-lightweight fiberglass composite shell
FIA 8855-1999 homologated racing seat
Largest composite racing seat in the Sparco lineup
Designed specifically for taller and larger drivers
Integrated head protection system
Deep side bolsters for exceptional lateral support
Excellent driver ergonomics and long-session comfort
HANS-compatible design
Fire-retardant upholstery materials
High-grip non-slip fabric in key support areas
Compatible with multi-point racing harness systems
Ideal for road racing, endurance racing, club racing, and track-day applications
Technical Specifications
Manufacturer: Sparco
Manufacturer Part Number: 008018RNR
Homologation: FIA 8855-1999
Shell Material: QRT Fiberglass Composite
Mounting Type: Side Mount
Harness Compatibility: Multi-Point Racing Harnesses
HANS Compatible: Yes
Seat Type: Competition Racing Seat with Integrated Head Protection
Why Choose the Sparco Pilot QRT?
The Sparco Pilot QRT fills an important gap in the racing seat market by providing a true FIA-approved competition seat specifically designed for larger drivers. Its combination of increased interior dimensions, lightweight QRT construction, advanced containment features, and race-proven safety makes it one of the best options available for drivers who need additional room without sacrificing performance.
For racers seeking maximum comfort, support, and safety in a larger-format competition seat, the Sparco Pilot QRT stands as one of the industry's benchmark solutions.
Sparco Pilot QRT Dimensions
```
Sparco S.p.A.
Sparco QRT-R X Off-Road UTV Racing Seat (Waterproof)
$1,029.00
<
Sparco QRT-R Racing Seat Water-Proof Off-Road UTV
The Sparco QRT-R XNR seat is the perfect choice for all UTV and OFF-Road applications were you need a strong and light racing seat that is also water-proof to keep you dry and driving all day at peak speed. The Sparco QRT-R is the first seat to feature Sparco’s patented QRT ultra-light technology. This QRT Technology gives an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. QRT Technology gives weight savings of 7 lbs to 10 lbs per shell. The main benefit is that QRT-R seat approaches the weight of a carbon fiber seat at a price of a fiberglass seat.
The Sparco QRT-R is the lightest "Medium/Large" size fiberglass seat, the shell alone weighs only 9.9 lbs (or 15 lbs fully trimmed). The Sparco QRT-R has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller vehicles. The Sparco QRT-R is FIA approved. Available in cloth.
REQUIRES QRT SIDE MOUNT #600QRT FOR PROPER MOUNTING
Sparco QRT-R Racing Seat Technology
Lightest "Medium/Large" size fiberglass seat on the market
Lower seating position that can fit taller/larger drivers
Smaller outer dimensions for small vehicle fitment
QRT Technology gives an average weight savings of 7lbs per shell
FIA approved
Sparco QRT-R Racing Seat Dimensions
Sparco S.p.A.
Sparco EVO QRT (STD, L, XL) Off-Road Racing Seat (Waterproof)
from $1,029.00
Sparco EVO QRT Off-Road Racing Seat
The Sparco EVO QRT Off-Road Racing Seat combines the legendary comfort and support of Sparco's EVO platform with durable waterproof construction specifically designed for UTV, off-road, desert racing, overlanding, and extreme outdoor environments. Built around Sparco's proven EVO L QRT shell, this specialized version delivers lightweight performance, exceptional ergonomics, and outstanding durability when conditions get rough.
Featuring Sparco's patented QRT (Quick Resin Technology) manufacturing process, the EVO QRT Off-Road seat offers exceptional strength while reducing weight by up to 30% compared to traditional fiberglass racing seats. Combined with waterproof, non-slip upholstery materials, the EVO QRT Off-Road is engineered to withstand mud, dust, water, and harsh outdoor conditions while maintaining the comfort and support drivers expect from a premium Sparco racing seat.
Updated shoulder bolsters improve fitment in compact vehicles, while lowered side bolsters make entry and exit easier when climbing in and out of UTVs, side-by-sides, race trucks, and off-road vehicles. Raised harness openings improve belt positioning for a wider range of driver heights and seating positions.
Built for Off-Road Adventure
The EVO QRT Off-Road was developed for drivers who need professional-level support and safety without sacrificing durability. Its waterproof construction makes it ideal for UTVs, side-by-sides, prerunners, rock crawlers, desert race vehicles, and adventure builds that regularly encounter wet, muddy, or dusty conditions.
The seat's compact exterior dimensions also make it an excellent choice for vehicles with limited cockpit space while still accommodating a broad range of driver sizes.
What is Sparco QRT Technology?
Designed and developed at Sparco's OEM Composite Laboratory in Italy, QRT (Quick Resin Technology) is an advanced manufacturing process derived from aerospace technologies. QRT creates one of the lightest fiberglass composite seat shells available while maintaining exceptional rigidity and durability.
This innovative process reduces seat weight by up to 30% compared to traditional fiberglass manufacturing techniques, delivering carbon-fiber-like performance at a more accessible price point.
Sparco EVO QRT Off-Road Features
Patented QRT ultra-lightweight fiberglass composite shell
Waterproof, non-slip upholstery designed for outdoor use
FIA 8855-1999 homologated racing seat
Optimized fitment for compact off-road vehicles and UTVs
Narrowed shoulder bolsters for improved clearance
Lower side bolsters for easier ingress and egress
Raised harness openings for improved belt positioning
Excellent driver ergonomics and comfort
Outstanding support during aggressive off-road driving
Ideal for UTVs, side-by-sides, desert racing, prerunners, and overland builds
Available Sizes
The EVO QRT Off-Road seat is available in multiple sizes to accommodate a wide range of drivers:
EVO – Medium (up to approximately 34" waist)
EVO L – Large (up to approximately 36" waist)
EVO XL – Extra Large (up to approximately 38" waist)
Technical Specifications
Homologation: FIA 8855-1999
Shell Material: QRT Fiberglass Composite
Upholstery: Waterproof Non-Slip Fabric
Mounting Type: Side Mount
Available Sizes: Medium, Large, Extra Large
Harness Compatibility: Multi-Point Racing Harnesses
Why Choose the Sparco EVO QRT Off-Road?
The EVO QRT Off-Road combines lightweight construction, FIA-approved safety, waterproof durability, and race-proven comfort in a package specifically tailored for harsh environments. Whether you're racing through the desert, exploring remote trails, or building a high-performance UTV, the EVO QRT Off-Road provides the support, durability, and reliability needed to tackle any adventure.
EVO Standard Dimensions
EVO L and EVO XL Dimensions
```
Sparco S.p.A.
Sparco Evolve 3.0 Sim Cockpit
from $999.00
Elevate Your Sim Racing Experience
The Sparco Evolve 3.0 Sim Racing Cockpit isn’t just a seat—it’s your gateway to a whole new level of virtual racing. Whether you’re setting lap records or diving into an intense sim championship, the Evolve 3.0 provides a professional-grade sim racing setup that makes you feel like you’re in the driver’s seat of a real race car.
Built with high-strength steel for stability and ultimate immersion, this cockpit is designed to handle the intensity of sim racing sessions. No distractions, no wobbles—just pure, uninterrupted racing action.
DESIGNED FOR SERIOUS SIM RACERS
Let’s be clear: this setup is for sim racing only. It’s engineered for virtual tracks, not real ones, so don’t go trying to install this in your car. But for the sim racing enthusiast, this rig is as close as it gets to the real thing. With multiple adjustment options and rock-solid stability, you’ll be able to fine-tune your setup to feel like you're right on the edge of every corner.
Super Sturdy Construction. Made from high-strength steel, the Evolve 3.0 provides a stable, rigid frame that ensures you stay locked into the action—without any seat wobble. Perfect for those nail-biting finishes.
Fully Adjustable. Customize your seat position, pedal angle, and steering wheel height to match your driving style. The automotive-grade seat track lets you slide forward or back with ease, while the adjustable pedal and wheel platforms allow you to tweak the tilt to your perfect driving angle.
Compatible with Sparco Seats. Whether you prefer a reclining or fixed back seat, the Evolve 3.0 has you covered. If you're going for a fixed back seat, just make sure to grab the Sparco Pro Bracket Kit (G02400NRRS), which offers side mounts for tilt and height adjustability.
Stable Footing. No slipping or sliding here. With adjustable leveling feet, the Evolve 3.0 stays rock-solid on any surface, from your carpeted man cave to a hardwood game room.
Fixed Back Seat? Here’s What You Need
Planning on installing a Sparco fixed back seat? You’ll need the Pro Bracket Kit, which includes side mounts to give you that all-important tilt and height control. Because comfort and control are everything when it comes to sim racing.
KEY FEATURES
High-strength steel frame for maximum rigidity
Adjustable seat, pedal, and steering wheel positions
Compatible with Sparco reclining and fixed-back seats (fixed-back seats require Pro Bracket Kit)
Adjustable leveling feet for stability on any surface
FAQS
1. Is the Sparco Evolve 3.0 easy to set up?
Absolutely. The cockpit comes with straightforward instructions, and you’ll have it assembled and ready for action in no time.
2. Will this cockpit stay stable during intense sim racing?
Yes! Thanks to the high-strength steel frame and adjustable leveling feet, this cockpit stays firmly in place, even during the most intense sim races. No wobbling, no distractions.
Ready to Take Your Sim Racing to the Next Level?
If you’re serious about sim racing, the Sparco Evolve 3.0 Sim Racing Cockpit is the upgrade your virtual setup needs. Get ready for an immersive, pro-level experience that brings the thrill of the track right into your home.
Don’t just race—evolve your sim setup today! Order now and start racing like a pro.
Sparco S.p.A.
Sparco QRT-R Racing Seat
$929.00
Sparco QRT-R Racing Seat
SPARCO'S ULTRA-LIGHT QRT TECHNOLOGY AT ITS BEST
The QRT-R is the first seat to feature Sparco’s patented QRT ultra-light technology. This QRT Technology gives an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. QRT Technology gives weight savings of 7 lbs to 10 lbs per shell. The main benefit is that QRT-R seat approaches the weight of a carbon fiber seat at a price of a fiberglass seat.
The QRT-R is the lightest "Medium/Large" size fiberglass seat, the shell alone weighs only 9.9 lbs (or 15 lbs fully trimmed). The QRT-R has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller vehicles. The QRT-R is FIA approved. Availble in cloth.
REQUIRES QRT SIDE MOUNT #600QRT FOR PROPER MOUNTING
SPARCO QRT-R RACING SEAT TECHNOLOGY
Lightest "Medium/Large" size fiberglass seat on the market
Lower seating position that can fit taller/larger drivers
Smaller outer dimensions for small vehicle fitment
QRT Technology gives an average weight savings of 7lbs per shell
FIA approved
SPARCO QRT-R SEAT DIMENSIONS
