2022 Top Trends

Longacre Deluxe 2½" Tire Gauge Measures from 0 to 40 psi in ½ psi increments The Longacre Deluxe 2½" Tire Gauge keeps the highest value race cars at the front of the pack. The Longacre Deluxe 52-52013 is a large faced, 2½" glow-in-the-dark tire gauge with  ½ psi accuracy, making it a trackside favorite with many teams from ChampCar to IMSA. LONGACRE DELUXE TIRE GAUGE DETAILS Manufacturer: Longacre Manufacturer part number: 52013 Gauge face: 2½" Pressure range: 0 - 40 psi Dial increments: ½ psi Accuracy: 2% Bleed off: Yes Holds pressure: Yes Includes both angle and ball chucks Hose length: 17" Internal damper

Longacre Standard 2.0" Tire Gauge Measures from 0 to 60 psi in 1 psi increments The Longacre Standard 2" glow-in-the-dark Tire Pressure Gauge is an affordable trackside favorite, with its wide 0-60 psi measurement range and 1 psi increments. This makes it easy to throw in your race-day bag or your glove box. The glow-in-the-dark dial gives you accurate pressure readings in all light conditions. LONGACRE STANDARD 2.0" TIRE GAUGE DETAILS Manufacturer: Longacre Racing Manufacturer Part Number: 52004 Measurement range: 0-60 psi Measurement increments: 1 psi Air pressure release button: one Internal gauge damper for more accurate readings and longer life Flexible 14" hose with angle chuck installed (also includes ball chuck) 2.0" glow-in-the-dark dial face

Longacre 17" Replacement Mirror Longacre Wide Angle 17" Racecar Replacement Rear View Mirror. Now you can easily see not just behind you, but in the hidden spots even with your quarter panel in the deepest of brake zones. LONGACRE 17" MIRROR DETAILS: Manufacturer: Longacre Manufacturer Part Number: 22547 Style: Panoramic / Convex Size: 17" Housing: Aluminum/ABS Plastic For a bigger and better field of rear vision, replace your factory rear view mirror with one of these 17" Panoramic mirrors from Longacre Racing. These mirrors are also a direct replacements for those in Longacre Racing's mirror kits.

Longacre 14" Replacement Mirror For a bigger and better field of rear vision, replace your factory rear view mirror with one of these 14" Panoramic mirrors from Longacre Racing. These mirrors are direct replacements for those in Longacre Racing's mirror kits. Longacre 14" Mirror Details: Manufacturer: Longacre Manufacturer part number: 22544 Housing Material: ABS Impact Plastic Mirror Material: Optically correct convex (panoramic)

Longacre Tire Marking Pen The Longacre Tire Marking pen makes it easy to keep track of tire positions, pressures, number of laps or stints, etc. With its fine tip, it's easy to legibly write directly on your race tires, even while they're hot. The Longacre Tire Marking Pen uses a metalized silver fluid that is very durable and won't wear off. LONGACRE TIRE MARKING PEN DETAILS Manufacturer: Longacre Racing Manufacturer Part Number: 50882 Color: metalized silver Makes a fine line that's easy to read Mark tire sizes, pressures, etc. Silver markings won't come off due to heat Tire markings are not easily removable

Longacre Magnum 3½" Tire Gauge  Measures from 0 to 60 psi in ½ psi increments Longacre Racing's Magnum tire pressure gauges have a highly visible, easy-to-read gauge face that glows in the dark to help provide accurate readings, even under low light conditions. These gauges include an ultra-flexible 17 in. hose, a high-flow release button, and are available with either an angle or ball chuck. The Longacre Magnum 3½" Tire Gauge keeps the highest value race cars at the front of the pack! LONGACRE MAGNUM TIRE PRESSURE GAUGE DETAILS Manufacturer: Longacre Manufacturer part number: 52001 Huge 3½" glow-in-the-dark face for easy readability Dual bleed buttons for faster pressure setting 0.5 psi increments with 2% accuracy Swivel angle chuck installed, alternate ball chuck included Holds pressure until released Internal gauge damper for more consistent, accurate readings Flexible 17" hose Silver case included The Longacre Magnum 52001 is a large faced, 3.5" glow-in-the-dark tire gauge with 2% accuracy and is a trackside favorite with many teams from ChampCar to SRO.

RaceQuip Adjustable Window Net Straps These Racequip bottom bar strap on window net mount kits are designed to hold the window net bottom bar in place. They include six, 1.5 in. nylon straps and six 3-bar heavy duty drop forged slides that are adjustable from 8 to 18 in. lengths. The straps can follow the contour of an angled door bar. RaceQuip Adjustable Window Net Strap Details: Manufacturer: Racequip Manufacturer part number: 705005 Color: Black Qty in kit: 6

Longacre 1 3/4" Helmet Hook Longacre Helmet Hooks keep your race helmet off the floor and safe from scratches and damage. The Longacre 22570 Helmet Hook fits perfectly on all 1.75" (1 3/4") roll bars and will last many years with its durable anodized finish. Longacre 1 3/4" Helmet Hook Details: Manufacturer: Longacre Manufacturer Part Number: 22570 Material: CNC Machined Billet Aluminum Finish: Black anodized Mount Diameter: 1.75" Protect your helmet Bolts onto your roll bar - no welding (choose size above) Lightweight billet aluminum - black anodized

Roux R-1F Fiberglass SA2020 Helmet Roux R-1 Fiberglass SA2020 helmet is Roux's entry-level R-1- series helmet featuring a lightweight Fiberglass shell that is Snell SA2020 rated. Despite the value-oriented price, the R-1 fiberglass still comes fully equipped with an integrated drink tube and radio gear, complete with noise-cancelling microphone and speaker pods. Roux R-1 Fiberglass SA2020 Helmet details: Manufacturer: Roux Manufacturer part number: RXHR1F-20F55 Rating: Snell SA2020 Rating: FIA 8859-2010 Matt Black Sizes: Small - 3X-Large Color: Matte Black Shell Material: Fiberglass Hans post anchors included: Yes Shield on the helmet: Clear Fit Pads: Not included, only with Composite and Carbon Roux helmets Integrated radio communications, IMSA on left side (adaptable to others protocols) Hydration drinking tube on left Internal Patent pending helmet release system Cool-X Helmet Cooling: No Helmet runs small The Release emergency helmet system allows for the safe removal of the helmet in the event of an accident, preventing spinal or head injuries. Roux R-1 Fiberglass Electronics: Included and installed speaker pods and noise-cancelling flex boom microphone, IMSA plug standard on drivers left side. Adapter cables are available to convert to Nascar, Peltor, Chatterbox and more. Roux R-1 Fiberglass Hydration System: Included and installed driver hydration system including a dry-break fitting on the drivers right side. Roux R-1 Fiberglass Emergency Release System: We have seen many great helmet release systems, but they need to be added after the helmet is built. The Eject System and Stand 21's Lid Lifter have been the most popular (actually Eject Wins by a little), but your Roux R-1 helmet has a built in Emergency Release System, to reduce neck loads upon removal of your helmet if needed. Roux R-1 Fiberglass SA2020 Helmet sizing chart:  

Longacre Complete Drink Kit - 1.75" Complete Longacre Drink kit for 1.75" roll bar. This complete Longacre Drink Holder & insulated bottle with extra length drink hose & bite valve keep you hydrated during those hot summer or long races. Longacre Complete Drink Kit 1.75" Details: Manufacturer: Longacre Manufacturer Part Number: 22551 Large capacity(42oz) double insulated bottle with tube Includes "bite valve" to avoid leaks from tube Bolts onto your roll bar - no welding required (choose size above) Lightweight powder coated aluminum Longacre Part Number: 22551 Roll Bar Diameter Mount Clamp: 1.75"

Longacre Toe-In Plates with Magnets The Longacre 52-79501 Toe-In Plates use magnets to hold the far end of the tape measure securely while you read the close-end measurement. Simple and easy to store in the spares kit, Longacre toe plates are a trackside must have. Longacre Toe Plates keep the highest value race cars at the front of the pack. Longacre Toe-In Plates with Magnets (pair) is a track side favorite with many teams from ChampCar to Grand-Am. Longacre Toe Plates with Magnets Details: Manufacturer: Longacre Racing Manufacturer Part Number: 52-79501 Quickest and simplest way to measure toe-in Rest one of these plates against the tire on each side and measure toe directly using the 2 tapes (included) Formed design is rigid for accuracy and stays put against the tire Magnets hold tape in place Dimensions: 23 1/2" x 9" [img-5557-left-large_default] How to use Longacre Toe Plates: This is a fast way to check / set front end toe. It is affected by wheel or tire runout. Be certain wheels run true and tires have no bulges. Turn wheels to straight ahead: Should be done on level ground. Set caster & camber first. Lean plates up against wheels: Folded lip goes to the outside. Be sure the entire plate is up against the wheel. Measure front width, then rear: Use the slots for the tape measure. Subtract one from the other for toe. Larger front width means toe-out. [img-2164-left-large_default]

Longacre Complete Drink Kit 1.5" Complete Longacre Drink kit for 1.5" roll bar. This complete Longacre Drink Holder & insulated bottle with extra length drink hose & bite valve keep you hydrated during those hot summer or long races. Details: Large capacity(42oz) double insulated bottle with tube Includes "bite valve" to avoid leaks from tube Bolts onto your roll bar - no welding required (choose size above) Lightweight powder coated aluminum Longacre Part Number: 52-22553 Roll Bar Diameter Mount Clamp: 1.5"

Longacre Helmet Hook - 1.5" Longacre Helmet Hooks keep your race helmet off the floor and safe from scratches and damage. The Longacre 22572 Helmet Hook fits perfectly on all 1.5" (1 1/2") roll bars and will last many years with its durable anodized finish. Longacre 1 1/2" Helmet Hook Details: Manufacturer: Longacre Manufacturer Part Number: 22572 Material: CNC Machined Billet Aluminum Finished: Black anodized Mount Diameter: 1.5" Protect your helmet Bolts onto your roll bar - no welding Lightweight billet aluminum - black anodized

AeroCatch 120 Series Flush Mount Hood Pins AeroCatch are installed on some of the fastest race cars on the planet. From Spec Miata to Daytona Prototype, AeroCatch hood pins are every race track every weekend. AeroCatch 120 Series Plus flush mount hood pin kits consist of lightweight, high-strength glass-reinforced thermoplastic housings containing a hinged, spring-loaded stainless steel pin. This pin engages with the aluminum hood pin forming a secure latch. Compact and aerodynamic, Aerocatch Flush Mount Hood Pins are modern replacements for conventional hood pins, door latches and more. The 120 series are designed to be fitted from above the panel and include a cardboard template to ensure precise cutting and drilling. Each AeroCatch 120 Hood Pin Kit includes two thermoplastic AeroCatch bodies, two nut fixing plates, two red aluminum strike pins, two rubber bump stops, all necessary fasteners, and an arrow sticker set. Keep your hood, trunk, tailgate, or bonnet shut at high speeds with a set of AeroCatch 120 Series Flush Mount Hood Pins. AeroCatch 120 Series Flush Mount Hood Pins Details: Manufacturer: AeroCatch Manufacturer part number: 120-2000 Hood pin length: 126mm (~ 5.0") Mounting: above panel Mount location: top- or side-mount Hood pin style: flush mount Hood pin body finish: black

Element E50 Extinguisher The Element E50 offers 50 seconds of fire-fighting protection. The incredibly compact and lightweight construction is easy to store and carry, making it perfect to keep in your car, or even in your backpack. Internationally tested and certified. Element E50 Extinguisher Details: Manufacturer: Element Manufacturer Part Number: 40050 Color: Red Height (inches) 11.75" Diameter (inches) 1.2" Weight: 0.60 lb (275g) Extremely portable No residue Non-toxic Non-corrosive Environmentally friendly Weatherproof - unaffected by extreme temperature, humidity, and vibration. Safe for wet environments and extremely hot environments "Zero-pressure discharge" creates no thrust that can spread oil & liquid fires Safe & maintenance-free Fights all major fire classes, including cooking oil & grease fires Includes 1 mounting clip

Longacre Clamp-On Spot Mirror (1.50") Adjustable spot mirror clamps securely onto any 1.50" OD tubing. This mirror is often mounted on the A-pillar of your roll cage, inside the race car to reduce aerodynamic drag by removing the OEM external side mirror while also providing improved rearward vision. It can be mounted on either the driver or passenger side. The Longacre Clamp-On Spot Mirror is 3.75" in diameter with a convex shape to give you a wide field of view. Easily adjusted, the mirror is designed to resist vibrations and locks firmly in place. Longacre Clamp-On Spot Mirror Details: Manufacturer: Longacre Manufacturer part number: 52-22549 Mirror diameter: 3.75" Mirror shape: convex Mounting bracket: machined billet aluminum, fits 1.50" OD tubing