Chillout Systems
Chillout Systems Replacement O-Rings
$10.00
Chillout Systems Replacement O-Rings (10-Pack)
This complete O-ring kit consists of ten universal ringed seals that prevent spillage.
Coolshirt
Coolshirt Connectors
from $10.00
Coolshirt Hose Connectors
FEATURES:
5/16" connectors that work with your Coolshirt system as well as others.
Sold individually, you'll need two to adapt a garment properly.
Choose connector style: Male or Female.
SYSTEM COMPATIBILITY (Coolshirt/Momo/F.A.S.T.):
Coolshirt MALE connectors work with any FEMALE connector (Coolshirt, Momo or F.A.S.T.). So no matter which system you have, a Coolshirt Coolwater shirt will work with it because of the MALE connector on the shirt.
If you own a Momo or F.A.S.T. cooling shirt and want to use it with a Coolshirt system, simply purchase two Coolshirt MALE connectors, snip off the connectors on your shirt, and replace them. That's it! Because the Coolshirt male connectors are universal, your shirt will now be usable with all three major cooling systems. Even if you’ll be racing in another car which uses a F.A.S.T. or Momo system, the new Coolshirt MALE connectors you just pushed on will work with it.
Griot's Garage
Griot's Garage Glass Sealant, 8oz
$9.99
Griot's Garage Glass Sealant
Glass Sealant from Griot's Garage dramatically improves the water repellancy of your vehicle's glass, giving you much better wet weather visibility.
Griot's Garage Glass Sealant Details:
Manufacturer: Griot's Garage
Manufacturer part number: 11033
Size: 8oz
Creates an extremely hydrophobic surface on your glass
Immense improvement in wet-weather visibility
Helps remove ice, salt, frost, and bugs from your glass more easily
Using an easy-to-apply wipe-on-buff-off formula, Griot's Garage Glass Sealant is your new secret for ensuring maximum wet-weather visibility. Water can kiss your glass goodbye.
Molecule
Molecule Anti-Fog Spray 4oz
$9.95
Molecule Anti-Fog Spray 4oz
improves visibility and is designed specifically to inhibit fog causing moisture on the interior of shields. Apply to the inside surface of visors, goggles or wind screens to guard against distortion.
Molecule Rain Repel Spray Details:
Manufacturer: Molecule Labs
Manufacturer part number: MLHAF41
Size: 4oz
Apply to visors, goggles, windshields or windscreens and watch rain fly off
Spray on, allow slight haze, reapply Molecule Anti-fog to ensure uniform coverage
Wipe final haze with dry cloth and watch rain easily keep clear
Environmentally friendly, biodegradable and non-hazardous
DiscoveryParts Pro Tip: Do not use any Molecule shield product on your Stilo visors as it is not compatible with the Stilo special anti-fog coating.
Molecule
Molecule Spot Cleaner
from $9.95
Molecule Spot Cleaner
Dissolve and suspend tough spots and stains that can create combustible hot spots with Molecule Labs Spot Cleaner. This cleaner is a concentrated formula that penetrates deeply into Nomex and technical fabrics to safely dissolve embedded spots and stains.
Motor sports injuries have decreased in recent years, thanks to improvements in the quality of protective gear. But despite driver and industry precautions, racing is still a dangerous sport.
Exposure to a flash fire for even a few seconds can lead to serious injury or loss of life. Severe skin burns occur more often than they should because protective clothing is not properly cared for or has not been made resistant to flammable liquids.
Racing suits made from Nomex® technical fabric have extraordinary properties to protect drivers from flames and heat. Care instructions published by Nomex® manufacturer DuPont state that this unique fabric requires special care to be fully effective.
DuPont's laundering guide cautions Nomex® users that the fabric must be kept clean. "Flame resistance can be compromised by the presence of flammable contaminants on the garment, " the guide explains.
However, DuPont advises against using ordinary soaps for removing these contaminants. "Soap scums may be flammable and could adversely affect the thermal ensure safety and comfort.
Molecule is the right way to care for Nomex. Molecule Wash effectively cleans Nomex® fabric in standard washing machines. Removes contaminants that can degrade fabric performance. Antimicrobial agent inhibits the growth of bacterial odors.
Molecule Protector spray extends the effectiveness of your clean firesuit. Protector spray bonds to Nomex fabric to help reduce flammable stains from oil, grease, fuel, dirt, and other contaminants that may compromise the efficiency of your racing suit. Armor your suit with Simpson Molecule Protector spray.
Do you have a long race weekend coming up? Molecule Refresh spray revives your suit for another day at the track. Molecule Refresh contains an antimicrobial agent to inhibit the growth of bacterial odors and has a light, fresh scent. It's formulated with cosmetic-grade, skin-friendly ingredients and maintains fabric breathability. You can even use it on helmet liners and gloves. Can't wash your suit? Freshen it up with Molecule Refresh spray.
Molecule works and has been tested with Nomex, CarbonX, Proban, Fire retardant cotton and all technical fabrics.
Concentrated formula effectively cleans technical fabrics in standard washing machines
Removes contaminants that can degrade fabric performance
Contains an antimicrobial agent to inhibit the growth of bacterial odors
Maintains fabric breathability
Contains a fabric brightener to help you look your best
Recommended for Nomex® and other technical fabrics
SPA Technique
SPA 1/8 NPT x 8mm 90º Decabon Fitting
$9.95
SPA Technique 1/8 NPT x 8mm 90º Fitting
SPA Technique 1/8 NPT to SPA 8mm Decabon 90º elbow connector for 8mm Decabon tubing used with SPA firing heads. If you need to install a firing head in a tight location, this is the fitting you need to do it correctly.
This SPA Technique 90º degree connector cannot be used with aluminum line from another manufacturer. SPA Technique Decabon tubing and fittings are unique unto themselves and are not interchangeable with products from other manufacturers.
SPA Technique 1/8 NPT to 8mm 90º Connector Details:
Manufacturer: SPA Technique
Manufacturer part number: SP-026-90
Trade name: 1/8 NPT x 8mm 90º Fitting
Use: installation of firing heads at 90 degrees from 8mm Decabon tubing
SPA Technique
SPA 1/8 NPT x 6mm 90-Degree Decabon Fitting
$9.95
SPA Technique 1/8 NPT x 6mm 90º Fitting
SPA 1/8 NPT to SPA 6mm Decabon 90-degree connector fitting for 6mm Decabon tubing used with SPA firing heads. If you need to install a firing head in a tight location, this is the way to do it correctly.
SPA 6mm Straight Connector Details:
Manufacturer: SPA Technique
Manufacturer part number: SP-021-90
Trade name: 1/8 NPT x 6mm 90 Fitting
Usage: Installing a firing head 90 degrees from 6mm tubing
Can I run this SPA Technique 90 degree connector fitting with my aluminum line from another manufacturer? No. SPA Technique Decabon tubing and fittings are unique unto themselves and are not interchangeable with products from other manufacturers.
Racing Radios
Racing Radio Replacement Foam for Earbuds
$9.95
Racing Radio Replacement Foam for Ear Buds
If you have a set of driver earpieces on which the foam is starting to get worn, this is the direct replacement to easily bring your earbuds back to the DB lowering, nice looking and feeling fit once again.
How to replace the foam on the end of your drivers earpieces:
Cut the old foam earpieces using a new razor blade - slicing like a banana without cutting the wire, transducer, or sound tube
Peel off the foam and use your finger nail or the edge of tweezers to remove the remaining glue
Insert the tweezers into the foam hole and stretch the hole from the flat side of the foam for 30 seconds
Slide the transducer into the elongated hole until the sound tube is near the end of the round part and let sit for 1 minute
Put a micro dot of super glue on the wire to foam connection on flat side and you are done
Racing Radio Replacement Foam for Ear Buds Details:
Manufacturer: Racing Radios
Manufacturer part number: CE31/A-FOAMS-COVERS
Qty in kit: 2
[img-6502-left-large_default]
Molecule
Molecule Refresh Race Fabric Deodorizer
from $9.95
Molecule Refresh gives your racing garments a quick breath of fresh air, reducing odors of all types on technical fabrics like Aramid and Nomex. Refresh is more than just a cover-up; it contains antimicrobial agents to inhibit the growth of odor-causing bacteria while maintaining fabric breathability. Cosmetics-grade, skin-friendly ingredients ensure that your race suit, underlayers, gloves, etc. stay comfortable.
With its light, fresh scent, Molecule Refresh is recommended for technical fabrics, including Nomex.
Discovery Parts
Windshield Number Set in Perforated Vinyl
$9.00
1 Color Vinyl Race Numbers
NOTE: You must add 1 of each numerical character to your cart! If your number is "45", add a "4" and a "5". You only need to use the text input field once per order. Need assistance? Call 706-344-1235
Conforming to the World Racing League Rulebook, Appendex A4I, Windshield Car Number Requirement, the 4" tall, Ariel Bold windshield numbers are perforated to work on both lexan and glass windshields. The Ariel Bold font is a wide stroke, but narrow number set that allows for a crisp, easy to read, number set with the minimum of required width.
Windshield Number Set in Perforated Vinyl Details:
Manufacturer: DiscoveryParts
Manufacturer part number: WRL012023
Vinyl: Gloss white perforated vinyl
Font: Arial Black
Size: 4 inches in height
This "make your own" kit can be used to pass tech inspection like a boss. The numbers come in prerforated gloss white only at 4 inches in height.. Vinyl is 3M or Oracal intermediate 7 year vinyl that causes no damage to your car's painted surface. Look like a pro for those pictures of you driving your loved one on the way to the podium. The prices are $9 per number meaning if your car number is 23, it's $18. If your car number is 007, it's $27.
SPA Technique
SPA Bulkhead Fitting 8mm
$9.00
Spa Bulkhead Fitting - 8mm
SPA Bulkhead fitting for 8mm Decabon tubing used with SPA fire systems. If you are running your fire discharge nozzle through a firewall or bulkhead, this is the way to do it correctly.
If you run you Decabon tubing through a hole you just drilled, the hole (even with a grommet) will cold work the tubing and cause an early failure. A SPA Bulkhead fiting fits the hole perfectly and uses the push-lock fastning system to connect the 2 pieces.
Can I run this SPA Bulkhead fitting with my aluminum line from another manufcaturer? NO. SPA tubing and fitings are unique to themselves and are not interchangeable with other manufacturers.
SPA Bulkhead Fitting - 8mm Details:
Manufacturer: SPA Technique
MAnufacturer part number: 02-SP-029
Trade name: Bulkhead fitting
Usage: Connecting 2 pieces of tubing through a firewall or bulkhead
[img-9385-left-large_default]
SPA Technique
SPA Bulkhead Fitting 6mm
$9.00
Spa Bulkhead Fitting - 6mm
SPA Bulkhead fitting for 6mm Decabon tubing used with SPA fire systems. If you are running your fire discharge nozzle through a firewall or bulkhead, this is the way to do it correctly.
If you run you Decabon tubing through a hole you just drilled, the hole (even with a grommet) will cold work the tubing and cause an early failure. A SPA Bulkhead fiting fits the hole perfectly and uses the push-lock fastning system to connect the 2 pieces.
Can I run this SPA Bulkhead fitting with my aluminum line from another manufcaturer? NO. SPA tubing and fitings are unique to themselves and are not interchangeable with other manufacturers.
SPA Bulkhead Fitting - 6mm Details:
Manufacturer: SPA Technique
MAnufacturer part number: 02-SP-020
Trade name: Bulkhead fitting
Usage: Connecting 2 pieces of tubing through a firewall or bulkhead
[img-9386-left-large_default]
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Competition Motorsport
Porsche Alignment Camber Shims
from $9.00
$66.00
Anodized Aluminum Porsche GT3 Control Arm Shims
For Porsche GT3 And Similar Two-Piece Lower Control Arms
Precision laser-cut from 6061-T6 aluminum and anodized for durability, these shims are used to adjust camber by changing length of your Porsche OEM or similarly configured lower control arm (such as these RSS units). Thickness in millimeters is silk screened on each shim for easy sorting.
One degree of negative camber is approx. 10mm shim.
AVAILABLE SIZES:
1 mm
3 mm
5 mm
PACKAGE SAVINGS:
Enthusiast (two of each shim) save 10%
Racer (four of each shim) save 15%
Team (eight of each shim) save 20%
These fit all two-piece Porsche lower control arms (except 991 GT3/GT3RS rear, which use a different shim shape). Shims are priced individually (other than packages). They are typically used in pairs or in multiple-shim combinations. Also fits 981 and 718 Cayman models.
CMS Performance shims are used on FRONT and REAR of any Porsche 986/987/996/997 fitted with two-piece lower control arms (commonly referred to as "GT3" control arms) and ONLY FRONT of 991s with two-piece lower control arms.
Driven Racing Oil
Driven Speed Lube 8 Ounce Aerosol Spray Can
$8.99
DRIVEN Speed Lube
BULK PRICING: Buy three or more bottles and save $.50/bottle!
Powerful penetrating and foaming lubricant that works its way into tight surfaces to lubricate hard-to-reach areas.
Driven Speed Lube borrows technology from Driven's race proven, championship winning oils to provide a spray lubricant that is perfect for exposed roller bearings, heim joints, linkages as well as chains and sprockets. These types of parts are often neglected and left dirty without any lubrication to protect them from metal to metal wear.
Speed Lube allows you to quickly service these items by simply spraying them down. The special formula includes additives that penetrate, lubricate and protect. Driven Speed Lube is perfect for all types of racing including: go-carts, mini sprints, quarter midgets, motorcycles, UTVs, ATVs and purpose built chassis cars and trucks. Speed Lube provides extended protection with it's powerful foaming lubricant that penetrates hard to reach tight surfaces!