All

Racetech Door Pulls High-quality door pull strap mounts to an 11mm (7/16") bolt hole. Made from plyable webbing, approximately 180mm (7") long and 25mm (1") wide. We have found that these can also function well as grab handles or as keychains. Available in Red, Blue, Orange or Black with an embroidered Racetech logo. Actual colors may vary slightly from picture. Please note: Each purchase includes one door pull.

Chillout Systems Chillout Systems Hose Connectors (Pair) $25.00

Chillout Systems Hose Connectors (Pair) Designed to withstand wear, these military-grade cooling adapters improve the reliability of the Chillout Quantum Cooler by latching securely and enabling coolant formula to cycle through the system with no leakage. This ultra-durable design allows thousands of dry connections and disconnections. Sold in pairs

Sabelt Sabelt 2 Inch Harness Pads $25.00

Sabelt 2 Inch Harness Pads Sabelt 2-inch harness pads offer additional padding for your harness shoulder straps, with easy-to-use Velcro closure. Sold in pairs.

Paragon Paragon Guardian Female Bulkhead Connector $24.99

Paragon Guardian Female Bulkhead Connector Paragon’s Guardian Female Bulkhead Connector is available as a replacement for a damaged female Guardian Bulkhead Connector on any Paragon Viking, Viking Pro, or Viking Pro Dual cooler, as well as Arctic Wolf, Arctic Wolf Pro, Arctic Fox and Arctic Fox Pro cooler bags. The Guardian Female Bulkhead Connector is Paragon’s emergency release connector option, allowing easy disconnection from your cooling system with a quick pull on the connected hose set or cooling garment. Priced/sold individually. Paragon Guardian Female Bulkhead Connector Details Manufacturer: Paragon Emergency release: yes Replaces broken fitting on your Paragon Viking cooler or cooler bag Sold individually

Garmin Garmin Catalyst Universal Carrying Case $24.99

Garmin Catalyst Carrying Case This Garmin Catalyst carrying case is a perfect fit for the Garmin Catalyst Driving Performance Optimizer. Featuring an easy to use perimeter zipper, this black case surrounds your device with a rugged outer shell and interior foam lining with a final layer of pretection of smooth gray velvet. Garmin Catalyst Carrying Case Details: Manufacturer: Garmin Manufacturer Part Number: 010-11917-00 Perfectly sized for the Garmin Catalyst Color: Black interior padding: Yes, impact foam with smooth gay velvet lining Closure: Zipper The Garmin Catalyst carry cas not only protects the screen of your Garmin Catalyst, but the important rear electric connections from damage.

Garmin Garmin Catalyst Camera Low Profile Windshield Mounting Kit $24.95

Garmin Catalyst Low Profile Adhesive Mounting Kit To mount the camera for the award winning Garmin Catalyst to a race car, we prefer the Garmin Catalyst Low Profile Adhesive Mounting Kit. It includes a small low profile ball joint with an adhesive base for mounting your Garmin Catalyst Remote Cam. Garmin Catalyst Low Profile Adhesive Mounting Kit: Manufacturer: Garmin Manufacturer Part Number: 010-12530-04 Fits Garmin Catalyst Remote Camera: Yes We have many racers that also take their Garmin Catalyst from their track car to their DE car and the Garmin 010-12530-04 Low Profile Adhesive Mounting Kit is a track worthy way of securing your Catalyst to your race car.

Schroth Schroth B23A Bendable Harness Snap End Kit $24.95

Schroth B23A Bendable Harness Snap End Kit Schroth B23A harness ends are bendable and make racing harnesses easier where there is very little clearance. The Schroth B23A bendable snap-on harness adapter lets you bolt one end to the chassis, bend it to the needed shape, and attach your harness snap end. Schroth B23A Bendable Harness Snap End Kit Details: Manufacturer: Schroth Manufacturer part number: B23A Manufacturer alternate part number: SR 01324 Bendable Fittings: Yes (2) Bolts: Yes (2) 7/16-24 Wavy Washers: Yes (2) Combination Washers: Yes (2) The B23A End Fitting Kit is a set of bolt in brackets that are usually sewn into 2" Lap belts. Schroth slang calls it a "Rallye End" kit because it usually comes on the street legal Rallye style belts. Like the 01323 kit, it is designed to be bent. These pieces are commonly used in Porsche applications where space for an Eye bolt is insufficient. This bracket can be bolted to the car, then bent so that a Snap-In bracket can be used to fix the harness to the bracket. We use Schroth B23A brackets in many applications where stock mounting locations do not leave sufficient space, or if the thread pitch is different from the eye bolts. If you have a Miata, S2000 or are putting a large/very large seat in a full interior car this is the harness mount kit you want.

Discovery Parts Discovery Parts Logo T-Shirt $24.95

Fly Our Flag at Your Next Event! These Next Level Apparel 60/40% cotton/poly t-shirts are lightweight, soft, comfortable and of course stylish. Show your support for Discovery Parts at your next race weekend, track day, autocross or cars and coffee! We love to see these shirts popping up on Facebook, Instagram and wherever else you post your favorite track pics, so be sure to tag us! We especially love to see customers walk into our store at Atlanta Motorsports Park donning our logo, so stop by and say hello!

MyLaps MyLaps Transponder Holder $24.95

MyLaps Transponder Holder This is the mount you need to securely install your Car, Motorbike, MX or Kart X2 Transponder onto your vehicle. Please note you that receive a holder with your original X2 Transponder purchase. This is simply an additional holder.

Competition Motorsport CMS Rollbar Harness Collars $24.95

Harness Belt Roll Bar Guide Clamp Keep your shoulder belts or head containment net straps in place with our heavy duty but lightweight aluminum 2 piece harness guide clamp that fits 1.5" and 1.75" roll bars perfectly. Harness Belt Roll Bar Guide Clamp Details: Manufacturer: DiscoveryParts Manufacturer part number 1.5": RB-COLLAR-AL15-BLK Manufacturer part number: 1.75": RB-COLLAR-AL175-BLK Material: Steel Finish: Black oxide Keeps your belts or cage nets in place, assisting in protection in a multiple impact. 2 Piece design makes installation easy Assists in perfect belt geometry Smooth radius on all edges so no scrapes or cuts when working in the area Sold in qty one each Perfectly sized to fit all roll bars with either 1.75" or 1.50" harness cross-bars. Precision-machined roll bar harness collars help keep your harness shoulder straps in exactly the right place on your roll bar. Easy to install double-split collars with high-strength Allen bolt hardware, they are available in satin black powder-coated aluminum.

CMS-RF1-Racing-brake-fluid-single bottle-image

Competition Motorsport CMS RF1 DOT4 Racing Brake Fluid from $24.95

CMS RF1 DOT4 Racing Brake Fluid HIGH BOILING POINT WITHOUT THE HIGH PRICE RF1 Racing Brake Fluid from CMS Performance is a fully-synthetic DOT4 brake fluid formulated to provide extraordinary performance under the most demanding high-temperature racing and track-day conditions. With a dry boiling point of 328º C (622º F), RF1 exceeds all DOT3 & DOT4 requirements and is compatible with all DOT 3, 4, and 5.1 fluids. (Not compatible with DOT5 or mineral-based brake fluids.) On the race track, brake systems operate at very high sustained temperatures, and there is perhaps no single safety system more important in racing than your brakes. No single part of that system is more critical than brake fluid. At CMS Performance, we got tired of (and a little nervous) using "racing" brake fluid at the race track that didn't live up to its claimed performance when things got hot. So we did something about it. Manufactured in partnership with Orthene, the brake fluid supplier to many teams in Formula 1, WEC, and other professional series, RF1 Racing Brake Fluid was formulated to maintain consistent viscosity, lubricity, and compressibility at the extreme system temperatures and line pressures found in racing and track days. The bottom line is this: you can spend more on brake fluid, but you can't buy higher-performance than RF1 Racing Brake Fluid. RF1 RACING BRAKE FLUID DETAILS Typical dry boiling point: 328º C (622º F) Typical wet boiling point: 204º C (399º F) Exceeds DOT3 & DOT4 standards Bottle size: 500 ml (16.9 fl oz) Click Here for Product MSDS Sheet A WORD ABOUT FLUSHING RACING BRAKE FLUID All brake fluid degrades over time (not mileage), attracting water as it ages, which, at high brake temperatures, can lead to fluid boil and brake fade or failure. That's why the "wet" (aged) boiling point of any brake fluid is substantially lower than the "dry" (new) boiling point. To maintain maximum braking performance, Competition Motorsport strongly suggests replacing your brake fluid before every track event, but at least every three months if you're consistently racing and/or driving at track days. It's cheap insurance against learning about brake fade the hard way!

-50% sale

OMP KS-4 Kart Racing Glove - Competition Motorsport

00
DAYS 00
HRS 00
MIN 00
SEC

OMP OMP KS-4 Kart Racing Glove (Garage Sale) $24.66 $49.00

OMP KS-4 Kart Racing Glove KS-4 kart gloves are made of abrasion-resistant and comfortable stretch fabric. Palms are in suede leather, with an elastic wrist stop to increase comfort and an adjustable leather strap on the wrist with velcro closure.

Discovery Parts Get This T-Shirt Free! $24.00

Discovery Parts Star Logo T-Shirt For a limited time (while supplies last), get the Discovery Parts "Star" logo T-shirt FREE! Choose your T-shirt size and add it to your shopping cart with at least $99 worth of other gear and – voila! – the shirt is yours at no charge. For road racing fanatics, this sleek and modern Discovery Parts T-Shirt by Next Level Apparel is a must-have. Made from a premium 60/40 cotton/poly blend, it balances all-day comfort with track-day durability. Featuring the iconic Discovery Parts Star logo on the chest, it’s built for those who live life in the fast lane, whether you’re in the paddock or pit lane—or just grabbing coffee between track sessions. Fly The Discovery Parts Flag Wherever You Go Discovery Parts T-Shirt Features: 60/40 cotton/polyester blend delivers comfort with wrinkle resistance Tailored fit with classic crew neck — track-day ready or casually clean-cut Available exclusively in Black to match your motorsport mindset Discovery Parts logo printed on the front Perfect for race weekends, cars & coffee, or hanging in the paddock Sizes from S through 2XL to fit every driver and enthusiast Discovery Parts T-Shirt FAQs: What material is used in the Star Logo T-Shirt? It’s crafted from a high-quality 60% cotton and 40% polyester blend that stays comfortable lap after lap. Does this shirt shrink in the wash? The cotton/poly blend helps resist shrinking and keeps its fit after multiple washes. Is the fit more athletic or relaxed? This shirt has a tailored, modern fit—not baggy, but not skin-tight. Order a size up if you prefer a looser fit. Can I wear this shirt at the track? Absolutely—it's made for trackside hangs, race-day pride, or wrenching on your car in the garage. Whether you're heading to an HPDE, prepping for autocross, or repping Discovery Parts at your favorite car show, this is the shirt that puts your passion in gear. Grab yours before they’re gone.

Sold out

Red Line Red Line Heavy Shockproof Gear Oil $23.97

Red Line Shockproof Heavy Gear Oil Red Line Heavy ShockProof Gear Oil was designed for heavily-loaded racing differentials and transmissions, as well as problem gearboxes. Red Line Heavy ShockProof Gear Oil has a film thickness greater than an SAE 75W250, yet low fluid friction like 75W90. Many performance racing applications like Sprint, Midget, Dirt Late Model and Quick-Change differentials, Detroit Lockers and spools, NHRA Top Fuel and Funny Car rear ends. Not recommended for most synchro applications due to the product's extreme slipperiness.

Red Line Red Line Superlight Shockproof Gear Oil $23.97

Red Line Superlight Shockproof Gear Oil The Super Low Friction Gear Oil for Lower Loading Used in low-power dog-ring racing transaxles seeing moderate to low loads (e.g., qualifying, etc.) Red Line Superlight Shockproof Gear Oil has a film thickness greater than an SAE 75W90 gear oil, yet exhibits low fluid friction like ATF. Acting like a liquid grease, this unique lubricant contains a suspension of solid microscopic particles functioning as an extreme pressure agent. This gives you the best of both worlds, balancing low drag and superior protection for gear teeth. Red Line Superlight Shockproof Gear Oil is popular in British F3, Euro F3, and Star Mazda racing gearboxes because of its ultra-low drag. Red Line Superlight Shockproof Gear Oil Details: Manufacturer: Red Line Manufacturer part no.: 58504 Unique lubricant with solid microscopic particles offers low drag/high protection 40% lower coefficient of friction and 250% greater load carrying capacity vs. conventional gear oils Relatively low viscosity, yet cushions gear teeth under extreme pressure Helps to prevent tooth breakage, resists throw-off Red Line Superlight Shockproof Gear Oil can be used with pumps and coolers when equipped with an inline screen rather than a fine filter. Avoid pumping down the center of a main shaft as the unique particles could centrifuge out of solution. Designed for wet sump transmissions and differentials with splash lubrication.

Schroth Schroth Reinforcement Plates M10 $23.75

Schroth Reinforcement Plates M10 Schrtoth SG55 reinforcement plates, also called back-up plates by many chassis builders, are used when reinforcing a harness mount point when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor. Schroth Racing SG55 Reinforcement Plate Details: Manufacturer: Schroth Manufacturer part number: SG55 Length: 3.25" Width: 2" Welded Nut Size/Pitch: M10 Finish: Zinc Plated Material: Steel Quantity in kit: 1 Schroth M8 Reinforcement Back-Up Plates make for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a M10 nut welded to it. This is what comes with most Schroth harness sets to mount your harness eye bolt to. This back-up plate is what comes standard issue with most Schroth Racing Harness kits