All

Stilo Bottom Rubber Trim for ST5, CMR, and KRT Did you put your Stilo helmet on your Hans device then then in your helmet bag? After a while, the Hans grip material will start to wear through the Stilo bottom rubber seal. One way to prevent this is to place a towel between your Hans device and your helmet so keep the abrasion to a minimum. If you have not been doing this, the this Stilo Replacement Rubber Seal For the Bottom of Your Stilo Helmet is the fix. Fits all Stilo SA2010 and SA2015 helmets. This is a Genuine Stilo Part for a perfect fit. Stilo Bottom Rubber Trim for ST5, CMR, and KRT Details: Manufacturer: Stilo Manufacturer new part number: YA0874 Fitment: ST5, CMR and KRT Helmets In general, YA0660 is the eye port rubber for all ST5 except ABP. YA0874 can be used on all helmets both auto and karting.

Schroth Reinforcement Plates M10 Schrtoth SG55 reinforcement plates, also called back-up plates by many chassis builders, are used when reinforcing a harness mount point when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor. Schroth Racing SG55 Reinforcement Plate Details: Manufacturer: Schroth Manufacturer part number: SG55 Length: 3.25" Width: 2" Welded Nut Size/Pitch: M10 Finish: Zinc Plated Material: Steel Quantity in kit: 1 Schroth M8 Reinforcement Back-Up Plates make for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a M10 nut welded to it. This is what comes with most Schroth harness sets to mount your harness eye bolt to. This back-up plate is what comes standard issue with most Schroth Racing Harness kits

Schroth Reinforcement Plates M8 Schrtoth SG54 reinforcement plates, also called back-up plates by many chassis builders, are used when reinforcing a harness mount point when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor. Schroth Racing SG39 Reinforcement Plate Details: Manufacturer: Schroth Manufacturer part number: SG54 Length: 3.25" Width: 2" Welded Nut Size/Pitch: M8 Finish: Zinc Plated Material: Steel Quantity in kit: 1 Schroth M8 Reinforcement Back-Up Plates make for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a M8 nut welded to it. This is what comes with most Schroth harness sets to mount your harness eye bolt to. This back-up plate is what comes standard issue with most Schroth Racing Harness kits

Schroth Reinforcement Plates 7/16" x 20TPI Schrtoth SG39 reinforcement plates, also called back-up plates by many chassis builders, are used when reinforcing a harness mount point when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor. Schroth Racing SG39 Reinforcement Plate Details: Manufacturer: Schroth Manufacturer part number: SG39 Length: 3.25" Width: 2" Welded Nut Size/Pitch: 7/16 x 20TPI Finish: Zinc Plated Material: Steel Quantity in kit: 1 Schroth 7/16" x 20TPI Reinforcement Back-Up Plates make for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a 7/16 x 20 TPI nut welded to it. This is what comes with most Schroth harness sets to mount your harness eye bolt to. This back-up plate is what comes standard issue with most Schroth Racing Harness kits

Paragon Blower Air Filter Screen Paragon’s Blower Air Filter Screen is a metal screen perfectly sized for the Paragon 240 CFM blower . The Blower Air Filter Screen helps keep large debris from entering the blower. The Paragon Blower Air Filter Screen slots perfectly into the intake side of your Paragon blower with no appreciable effect on airflow.

Paragon Defense Solution 16 Oz. Paragon Defense Solution enhances cooler, garment, and hose performance in your driver cooling system by defending against mold and bacteria growth. Paragon Defense Solution is formulated to safeguard your cooling investments against mold, mildew, and harmful bacteria that cause reduced water flow and musty odors. Paragon Defense Solution is non-toxic, biodegradable, and environmentally friendly. It's also compatible with non-Paragon ice water-based coolers. This non-toxic, biodegradable solution contains a fungicide that is safe to use in all Paragon cooling systems. Regular use of Paragon Defense Solution will not only help keep your system clean, it will also improve the performance and life of your system's fluid pump. Use 2 oz. of additive every time your driver cooling system is used (or 6 oz. for the large, multi-person pit cooling systems).

Longacre Tire Marking Pen The Longacre Tire Marking pen makes it easy to keep track of tire positions, pressures, number of laps or stints, etc. With its fine tip, it's easy to legibly write directly on your race tires, even while they're hot. The Longacre Tire Marking Pen uses a metalized silver fluid that is very durable and won't wear off. LONGACRE TIRE MARKING PEN DETAILS Manufacturer: Longacre Racing Manufacturer Part Number: 50882 Color: metalized silver Makes a fine line that's easy to read Mark tire sizes, pressures, etc. Silver markings won't come off due to heat Tire markings are not easily removable

VP Racing Utility Jug Replacement Big Cap Replacement big cap for a VP Racing Motorsports Utility Jug. Complete cap assembly features an O-Ring seal for leak-free racing fuel transport and filling. Red center plug can be removed to attach a VP Racing Utility Jug Filler Hose for no-leak refueling. VP RACING REPLACEMENT FUEL JUG CAP DETAILS Manufacturer: VP Racing Manufacturer part no.: 3042 Color: Black Seal type: O-Ring Removable center cap Fits all modern VP Race Jugs

Molecule Wash Kit Save some money and try both. Molecule Nomex Suit Wash Effectively Cleans Nomex Fabric (and other technical fabrics) in standard washing machines. It is formulated specifically for the critical requirements of Nomex racing suits. It is expressly designed to remove the unique oils, fuel, and soils that are often encountered in the racing environment. Molecule Sample Kit-Refresh/Wash 4oz ea Details Manufacturer: Molecule Labs Manufacturer part number: MSAK-442 Molecule Wash: 4oz Molecule Spot Cleaner: 4oz Concentrated formula effectively cleans technical fabrics in standard washing machines Removes contaminants that can degrade fabric performance Contains an antimicrobial agent to inhibit the growth of bacterial odors Maintains fabric breathability Contains a fabric brightener to help you look your best Recommended for Nomex® and other technical fabrics Molecule Refresh keeps your suits and helmets clean and fresh over long racing weekends and between washings. This spray is designed to reduce odors on all technical fabrics and contains an anti-microbial agent that inhibits the growth of bacterial odors. Molecule Labs Refresher has a light, fresh scent and contains skin-friendly ingredients. Motor sports injuries have decreased in recent years, thanks to improvements in the quality of protective gear. But despite driver and industry precautions, racing is still a dangerous sport. Exposure to a flash fire for even a few seconds can lead to serious injury or loss of life. Severe skin burns occur more often than they should because protective clothing is not properly cared for or has not been made resistant to flammable liquids. Racing suits made from Nomex® technical fabric have extraordinary properties to protect drivers from flames and heat. Care instructions published by Nomex® manufacturer DuPont state that this unique fabric requires special care to be fully effective. DuPont's laundering guide cautions Nomex® users that the fabric must be kept clean. "Flame resistance can be compromised by the presence of flammable contaminants on the garment, " the guide explains. However, DuPont advises against using ordinary soaps for removing these contaminants. "Soap scums may be flammable and could adversely affect the thermal ensure safety and comfort. Molecule is the right way to care for Nomex. Molecule Wash effectively cleans Nomex® fabric in standard washing machines. Removes contaminants that can degrade fabric performance. Antimicrobial agent inhibits the growth of bacterial odors. Dissolve and suspend tough spots and stains that can create combustible hot spots with Molecule Spot Cleaner. This cleaner is a concentrated formula that penetrates deeply into Nomex and technical fabrics to safely dissolve embedded spots and stains. Molecule Protector spray extends the effectiveness of your clean firesuit. Protector spray bonds to Nomex fabric to help reduce flammable stains from oil, grease, fuel, dirt, and other contaminants that may compromise the efficiency of your racing suit. Armor your suit with Simpson Molecule Protector spray. Do you have a long race weekend coming up? Molecule Refresh spray revives your suit for another day at the track. Molecule Refresh contains an antimicrobial agent to inhibit the growth of bacterial odors and has a light, fresh scent. It's formulated with cosmetic-grade, skin-friendly ingredients and maintains fabric breathability. You can even use it on helmet liners and gloves. Can't wash your suit? Freshen it up with Simpson Molecule Refresh spray. Molecule works and has been tested with Nomex, CarbonX, Proban, Fire retardant cotton and all technical fabrics.

Part Number: 920-101-003-FIA

Stilo Visor Stocking Bag Stilo gives you one free Visor Stocking Bag with every new shield, but having an extra is a great idea to make sure your Stilo shields have the longest life possible. Constructed of soft micro-fiber with a draw string and ball lock, this Stilo visor stocking bag keeps your Stilo visor protected. Works perfectly with all Stilo ST4 and ST5 Composite, Offshore, Carbon, 8860, and 8860 Zero helmet shields. Stilo Visor Stocking Bag Details: Manufacturer: Stilo Manufacturer part number: YY0014 Fitment: Stilo ST4, and ST5 Composite, Offshore, Carbon, 8860, and 8860 Zero helmet shields  

Discovery Parts Gift Card Not sure what to buy the racer in your life? Want to surprise your favorite track-day enthusiast but don't want to give it away by asking too many questions? We can help! Pick up a Discovery Parts Gift Card today and eliminate the guesswork, letting them come to Discovery Parts and be a "kid in a candy store!"Gift cards from Discovery Parts range from $10 to $1,000, and are good for one year from the date of purchase. Best of all, they can be used for absolutely anything we carry. That includes sale and clearance items, even special-orders!PLEASE NOTE:After you complete your gift card checkout, you will receive an automated email with a unique gift card code. If you would like to buy multiple gift cards, please buy each card as a completely separate order. Each email can only contain a single gift card code, so you'll receive a separate email for each card.