All

PORSCHE 981 GT4 CLUBSPORT This Girodisc conversion system is a direct rotor replacement for the Porsche GT4 Clubsport. These two-piece floating rotors will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with lightweight high-performance Girodisc rotors (paired with Girodisc A2-176 rear rotors), your factory brake bias and ABS efficiency are maintained. The low rotational and unsprung weight allows for quicker acceleration and transient suspension response. When used with Pagid or PFC racing brake pads and Discovery Parts RF1 Racing brake fluid, you have an amazing, durable solution to cracked or broken carbon-ceramic rotors at a fraction of the cost of the factory PCCBs. The hat of each rotor is machined from 6061-T6 aircraft aluminum. The disc is manufactured from cast iron using the same specs and materials as professional racing organizations. The curved-vane design acts as a centrifugal pump to force cool air through the disc. The disc and hat mount together using a floating mount system with high-strength alloy steel drive pins and Grade 12 cap screws. The drive pins transfer braking load while maintaining axial and radial float between the disc and hat to accomodate heat expansion. Hardened washers and anti-noise springs eliminate the rattle and noise sometimes associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement (using Girodisc D1-176); the aluminum hats are re-usable to save money. Sold/priced per pair.

Discovery Parts is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. Fits Porsche 991 Cup Car The GiroDisc system is an upgrade to a 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight (approx. 8 lbs) allows for quicker acceleration and suspension response. When used with Pagid or PFC performance brake pads, and Discovery Parts RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

PORSCHE 981 GT4 CLUBSPORT This Girodisc conversion system is a direct rotor replacement for the Porsche GT4 Clubsport. These two-piece floating rotors will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with lightweight high-performance Girodisc rotors (paired with Girodisc A2-176 rear rotors), your factory brake bias and ABS efficiency are maintained. The low rotational and unsprung weight allows for quicker acceleration and transient suspension response. When used with Pagid or PFC racing brake pads and Discovery Parts RF1 Racing brake fluid, you have an amazing, durable solution to cracked or broken carbon-ceramic rotors at a fraction of the cost of the factory PCCBs. The hat of each rotor is machined from 6061-T6 aircraft aluminum. The disc is manufactured from cast iron using the same specs and materials as professional racing organizations. The curved-vane design acts as a centrifugal pump to force cool air through the disc. The disc and hat mount together using a floating mount system with high-strength alloy steel drive pins and Grade 12 cap screws. The drive pins transfer braking load while maintaining axial and radial float between the disc and hat to accomodate heat expansion. Hardened washers and anti-noise springs eliminate the rattle and noise sometimes associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement (using Girodisc D1-176); the aluminum hats are re-usable to save money. Sold/priced per pair.

Discovery Parts is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. Fits Dodge Viper ACR with OEM CCM Rotors (Conversion to Iron) The GiroDisc system is an upgrade to a 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight (8 lbs per corner) allows for quicker acceleration and suspension response. When used with Pagid or PFC performance brake pads, and Discovery Parts RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

Discovery Parts is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. Fits Porsche 991 Cup Car The GiroDisc system is an upgrade to a 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight (approx. 8 lbs) allows for quicker acceleration and suspension response. When used with Pagid or PFC performance brake pads, and Discovery Parts RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

Discovery Parts is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. Fits Lamborghini Murcielago Late (8/4 Pot) The GiroDisc system is an upgrade to a 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. When used with Pagid or PFC performance brake pads, and Discovery Parts RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

Discovery Parts is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. Fits Lamborghini Murcielago Early (4/4 Pot) The GiroDisc system is an upgrade to a 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. When used with Pagid or PFC performance brake pads, and Discovery Parts RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

Bell GT6 RD Carbon Fiber Auto Racing Helmet SA2020 with electronic communications built-in Rev up those engines, gearheads! If you're the type who feels the need - the need for speed - and likes their track days with a touch of flair, then, boy, do we have a surprise for you!  Introducing the Bell GT6 Pro RD Carbon Fiber Helmet. Now, we know what you're thinking, "Just another helmet, right?" WRONG. It's like saying the Mona Lisa is "just another painting." For those who refuse to settle for ordinary, the Bell GT6 Pro RD is your ticket to the elite racers' club. Derived from the legendary HP6, this helmet boasts a sleek, aggressive design that screams, "Move over, amateur; pro coming through!" Why the Bell GT6 Pro RD Carbon Fiber Helmet is a game-changer: Ultra-Lightweight Shell: Made from a premium carbon composite, it's so light you'll forget it's on. You might even float a little. Unrivaled Vision: With a wide eyeport opening, see more of the track, your opponents, and that victory waiting for you at the finish line. Cool Your Jets: Connect to various external cooling systems and let the extraction vents do their magic. Say What?: With the integrated radio communication kit, including that sweet IMSA wired 4 pin connector, you're all set to chat mid-race. Or sing. We don't judge. Safety on Point: Comes with factory-installed Hans anchors because we care about that noggin of yours. All About Comfort: Dark Grey high strength and high comfort FR fabric. It’s like a spa for your head. And here's the deal-sealer: It's not just a helmet; it's a statement. A testament to your passion for racing, your dedication to the sport, and your impeccable taste in gear. So, the question is, are you ready to elevate your racing experience? Get that fierce track look coupled with premium features that'll have everyone in the pitstop doing a double-take. Ready, set, race! Secure your Bell GT6 Pro RD Carbon Fiber Helmet now and blaze the track like the superstar you are. Click “Add to Cart” before it zooms out of stock! Derived from HP6, the GT6 CARBON features the same modern and aggressive design, developed for racers in closed-car environments, featuring a wide eyeport for extended vision with an ultra-lightweight Premium carbon shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. The RD is fitted with a fully integrated radio communication kit with a microphone and earcups providing optimal noise insulation. The kit includes a wired 4 pin male IMSA radio connector.  BELL GT6 CARBON FIBER AUTO RACING HELMET FEATURES Ultra-lightweight Premium Carbon Composite shell Wide eyeport opening for optimal vision in closed cockpit cars Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Integrated channels in face piece offering multiple options to install drinking tube, valves, and radio systems Extraction vents to maximize cooling and air circulation Factory installed communication system with microphone and ear cups. (IMSA) Factory installed Hans anchors as original equipment Optional Top and Side air intakes available for use with external cooling system Earcups for increased noise insulation Interior: Dark Grey High Strength – High Comfort FR Fabric Color: Carbon, Gloss Finish Homologation: FIA8859-2015 & Snell SA2020 Sizes: 6 3/4 (54) to 7 5/8+ (61+) Gear Up Like a Pro with the Bell GT6 RD Carbon Fiber Helmet SA2020. Crafted for Champions, this helmet packs advanced safety and performance into its lightweight carbon fiber build. Get ready to rule the racetrack! IN THE BOX BELL GT6 Carbon FIBER AUTO RACING HELMET Clear SE06 3mm DSAF Shield Installed Drawstring Helmet Bag Plastic Tearoff Posts Installed Hex Wrench Key BELL GT6 PRO RD CARBON FIBER AUTO RACING HELMET FREQUENTLY ASKED QUESTIONS (FAQ): Remember that safety is paramount in auto racing, and choosing the right helmet and maintaining it properly is essential for your protection on the track. Always consult with the professionals at Discovery Parts and refer to the manufacturer's guidelines for specific questions about your racing helmet. Why do I need a racing helmet? Auto racing helmets are designed to protect drivers from head injuries and fire during high-speed races and crashes. They are a crucial safety component in motorsports. How do I choose the right size Bell GT6 Pro Carbon Fiber helmet? You should measure your head's circumference using a flexible tape measure, then refer to the manufacturer's sizing chart to select the appropriate size helmet. Please review our blog posting on how to properly fit your new auto racing helmet from Discovery Parts. What safety standards should I look for in a Bell GT6 Pro Carbon Fiber racing helmet? Look for helmets that meet safety standards like Snell and FIA depending on your racing discipline. These standards ensure the helmet's safety and quality. DOT helmets are designed for street use and not for racing and track use. What's the difference between full-face and open-face, and helmets? Full-face helmets provide the most protection with a complete face shield, while open-face helmets cover the top and sides of the head. Can I use a motorcycle helmet for auto racing? No, motorcycle helmets do not provide the same level of protection as auto racing helmets, as they are designed for different purposes. It's recommended to use a helmet specifically designed for auto racing which includes fire protection in addition to impact protection. How often should I replace my Bell GT6 Pro Carbon Fiber auto racing helmet? Auto racing helmets should be replaced every 5-10 years, depending on the manufacturer's recommendations and usage. If the helmet is involved in a crash, it should be replaced immediately. Are expensive racing helmets safer than budget ones? Safety standards dictate the minimum safety requirements, so even budget-friendly helmets can offer protection. However it’s important to consider how lower-priced helmets are meeting the required testing standards. More expensive helmets are lighter, smaller, are constructed of superior materials, and often come with additional features then less expensive helmets. How do I maintain and clean my Bell GT6 Pro Carbon Fiber racing helmet? Follow the manufacturer's instructions for cleaning and maintenance. You should clean the exterior, interior and shield with the Molecule Helmet Care Kit. Do I need to wear a balaclava under my Bell GT6 Pro Carbon Fiber racing helmet? Balaclavas are typically not required for Driver's Education events, however they make wearing a helmet much, much more comfortable. Balaclavas will provide fire protection (if fire rated), help keep your helmet lining clean and order free by absorbing the majority of sweat while using it, and additionally balaclavas make putting your helmet on and taking it off by protecting your ears and keeping from from folding over when you helmet is worn. Discovery Parts recommends balaclavas from Alpinestars, OMP, Sabelt, Sparco, and Stand21. If you are entering sanctioned auto racing events, balaclavas will be required for fire protection. Is the SNELL SA Rating important? The Snell SA2020 certification is a safety standard established by the Snell Memorial Foundation for auto racing helmets. It sets the criteria and requirements that helmets must meet to be considered safe and suitable for use in motorsport events. Snell SA2020 certification is highly regarded in the motorsports industry and is often required or recommended by racing organizations and events. It signifies that a helmet has passed rigorous testing to provide maximum safety for drivers in various motorsport disciplines, including road racing, NASCAR, Formula 1, drag racing, and more. It's essential for drivers to check the specific safety standards required by the racing organizations they participate in to ensure compliance. Is the FIA helmet certification important? Yes, FIA (Fédération Internationale de l'Automobile) certification is crucial for auto racing helmets, especially in the context of international motorsport events and many national and regional racing series in the USA. The FIA 8859-2015 standard is commonly associated with racing helmets used in various motorsport disciplines. Helmets certified to FIA 8859-2015 met the safety requirements set by the FIA and were widely accepted in many racing series Which helmet certification is the most stringent and the hardest to meet? The FIA 8860-2018 certification is considered the most stringent and advanced helmet certifications available for auto racing helmets, and it is often associated with top-tier motorsport categories like Formula 1. It's important to note that the FIA 8860-2018 helmets offer a high level of protection and their use is mandatory in many racing series. Drivers should always check the regulations of the racing series they intend to participate in to ensure compliance with helmet certification standards. Can I wear glasses with my Bell GT6 Pro Carbon Fiber helmet? Most helmets have provisions for wearing glasses or goggles, but check the design to be sure. Most manufacturers feature helmet models with wider eye ports to better accommodate eye glasses. Are carbon fiber helmets better? Carbon fiber helmets are lightweight and strong, a top choice for racers. But remember, certification matters most. Can I use a used helmet for racing? It's best to buy a new helmet. Used helmets may have unseen damage or be out of date on safety standards. Can I buy replacement parts for my Bell GT6 Pro Carbon Fiber helmet, like visors or padding? Many manufacturers offer replacement parts, including visors and padding, to extend your helmet's lifespan. How can I prevent helmet fogging during races? Anti-fog sprays and inserts are available to help keep your visor clear during races. What's the importance of proper helmet ventilation? Proper ventilation helps keep you cool and comfortable during races, reducing the risk of heat exhaustion. How do I store my Bell GT6 Pro Carbon Fiber helmet between races? Keep it in a cool, dry place away from direct sunlight and chemicals in a bag designed to store your auto racing helmet, like the Discovery Parts Evo Helmet Bag. Where can I buy a certified racing helmet? You should only buy from a professional authorized dealer who has sold thousands of helmets. You can find all the best brands at Discovery Parts online at www.discoveryparts.com or visit our retail store at Atlanta Motorsports park or at one of the hundreds of race and track day events we attend and support. Remember, safety should always come first in auto racing. Choose a certified helmet that meets the necessary standards to protect yourself on the track. We take immense pride in offering a wide selection of Bell auto racing helmets, designed to meet the demands of professional racers and motorsports enthusiasts alike. Bell has been at the forefront of helmet innovation and safety for decades, earning a reputation as a top-tier brand in the racing world. Key Features of Bell Racing Helmets: Unparalleled Safety: Bell racing helmets are engineered to the highest safety standards, including certifications like Snell and DOT approval, ensuring your head is well-protected in high-speed racing conditions. Premium Materials: Crafted with precision, Bell helmets feature carbon fiber construction, making them lightweight yet incredibly strong for maximum protection. Comfort and Fit: Bell's commitment to comfort is evident in the design of their helmets. They offer a range of sizes, and many models have customizable padding to ensure a snug fit. Aerodynamic Design: Bell helmets are designed with aerodynamics in mind, reducing wind resistance and enhancing performance on the track. Our Extensive Bell Auto Racing Helmet Collection: Bell HP77 Carbon Fiber 8860-2018 Helmet Bell HP7 Carbon Fiber 8860-2018 Helmet Bell HP6 8860-2018 Helmet Bell RS7C LTWT Carbon Fiber Helmet Bell GT6 RD Carbon Fiber Helmet Bell RS7 Carbon Fiber Helmet Bell BR8 Carbon Fiber Helmet Bell GT6 Carbon Fiber Helmet Bell GP.3 Carbon Fiber Helmet Bell GTX.3 Carbon Fiber Helmet Bell M.8 Carbon Fiber Helmet Bell RS7 Pro Helmet Bell GT6 Helmet Bell BR8 Helmet Bell GP.3 Helmet Bell GTX.3 Helmet Bell M.8 Helmet Bell K1 Pro Helmet Bell K1 Sport Helmet Bell Mag Rally Helmet Frequently Asked Questions About Bell Helmets: Where are Bell helmets made? Bell helmets are proudly manufactured in the Bahrain, maintaining the highest quality standards. Is Bell a good helmet brand? Yes, Bell is renowned for its commitment to safety, innovation, and performance, making it a trusted choice among professional racers and enthusiasts. Are Bell helmets Snell approved? Yes, many Bell helmets are Snell approved, meeting rigorous safety standards. Are Bell helmets FIA approved? Absolutely, several Bell helmets are FIA 8860-2018 certified, ensuring they meet the most stringent safety requirements. Do Bell helmets run small? Bell offers a variety of sizes and often provides sizing charts to help you choose the right fit. It's important to measure your head and refer to their guidelines for a proper fit. For racers who demand the best in safety and performance, Bell auto racing helmets are the ultimate choice. Explore our extensive collection to find the perfect helmet for your racing needs. Bell Racing Helmets: Bell Racing Helmets are renowned for their exceptional quality and safety features. With a wide range of models to choose from, you can find the perfect Bell Racing Helmet to suit your racing needs. Bell Racing Helmet: Each Bell Racing Helmet is a product of meticulous craftsmanship and cutting-edge technology. When you wear a Bell Racing Helmet, you're choosing a helmet that prioritizes your safety and performance on the track. Bell Race Helmets: Bell Race Helmets come in various styles and designs to cater to different types of motorsports. Whether you're into karting, open-wheel racing, or stock car racing, Bell has race helmets tailored for your specific discipline. Bell Race Helmet: Your Bell Race Helmet is more than just protective gear; it's a crucial part of your racing ensemble. The aerodynamic design of a Bell Race Helmet helps reduce wind resistance, giving you a competitive edge. Bell Helmet: A Bell Helmet is a symbol of trust in motorsports. Professional racers and amateurs alike rely on the comfort, safety, and durability that Bell Helmets provide during intense racing conditions. Bell Helmets: Bell Helmets have a rich history of innovation and excellence. The extensive range of Bell Helmets ensures that there's a model suitable for every racer, whether you're a seasoned pro or just starting in the sport. Bell Carbon Fiber Helmet: Bell Carbon Fiber Helmets combine the lightweight properties of carbon fiber with advanced safety features. These helmets are a top choice for racers seeking the ultimate in protection without sacrificing comfort. Race Car Helmet: A race car helmet is a fundamental piece of safety gear for any racer. Bell's race car helmets are engineered to meet the rigorous demands of motorsports, ensuring you stay safe on the track. Racing Helmet: Your racing helmet is your shield against potential accidents. Bell Racing Helmets are designed to offer superior impact protection while maintaining optimal visibility and ventilation. Racing Helmets: Racing helmets are a racer's best friend. Bell Racing Helmets, with their reputation for quality and safety, are the go-to choice for many professionals and enthusiasts in the racing community. Bell Racing: Bell Racing is synonymous with excellence in the motorsports industry. Their commitment to research, development, and testing has solidified their position as a leader in racing helmet technology. Auto Racing Helmet: When it comes to auto racing, your helmet is your first line of defense. Bell Auto Racing Helmets are engineered to withstand the rigors of high-speed racing, ensuring your head is protected. Auto Racing Helmets: Auto racing helmets from Bell are designed to provide optimal head protection while maintaining lightweight and aerodynamic qualities, allowing you to perform at your best.

AiM GS-Dash and EVO4S Data Logger Dash Display w/ GPS This Aim GS-Dash and EVO4S Data Logger and Racing Dash Display Kit has been designed to put data sampled by the new generation of AiM data-loggers, the EVO4S, right at your fingertips. That includes all data coming from your vehicle’s ECU, from the internal accelerometers and the GPS module, and from any custom sensors you have. Easy and Immediate Readability In its compact structure, AiM GS-Dash & EVO4S Racing Data Logger Kit features a wide 268x128 pixel display with excellent readability. The screen can be backlighted in one of the seven available colors and the incorporated light sensor keeps brightness and contrast ideal in all light conditions. Data can be arranged on up to nine separate pages that can easily be run through using the metallic buttons on the GS-Dash. Recall Your Session Highlights A key-data summary is available at the end of each session where you can also see a list of all the laps of the sessions, with their times, min/max speed and min/max RPM's. Configure Your LEDs One by One Five RGB shift lights can be configured for each gear, choosing LED color and RPM threshold values which will turn it on/off. Alarms are managed in a very flexible way: you can choose the situation that generates the alarm, the LED behavior (blinking frequency and color) when the alarm appears and the conditions for its switch-off. A warning message can also be shown. Easy Configuration Configuration of shift lights, alarms, and customized data pages is intuitive and immediate using the dedicated Race Studio 3 software. Shift lights and alarms must be configured using the RaceStudio 3 configuration panel. Data is viewed in customizable pages. With few clicks you can enable up to eight custom pages: you decide where to show the desired variables (up to four on each page) from those sampled by the ECU, the accelerometers and the GPS values from EVO4S. Configuration can be done either using RaceStudio 3 or via keyboard. Compact and Durable Chassis Its small dimensions make it particularly suitable for small cockpit installation (e.g., motorcycles or formula cars). Manufactured from anodized aluminum with an edge-to-edge glass screen and metallic push-buttons, the GS-Dash is robust and fully waterproof.

Sparco QRT Performance Racing Seat The Sparco QRT-R was the first seat to feature Sparco’s patented QRT technology. The QRT Performance seat represents the luxury evolution of the QRT-R race seat. The QRT Performance uses the same FIA race shell as the QRT-R race seat but is covered in Italian Leather and Alcantara. The seats are handstitched in the Sparco OEM factory in Torino Italy. The QRT Performance has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller cockpits. The QRT Performance can hold the driver during extreme lateral forces, but is also comfortable for long road trips. Sparco QRT TECHNOLOGY Sparco QRT Technology gives an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. QRT Technology gives an average weight savings of 30% when compared to standard fiberglass technology. The main benefit is that QRT seats approach the weight of carbon fiber seat at the price of a fiberglass composite seat. REQUIRES QRT SIDE MOUNT #600QRT FOR PROPER MOUNTING Sparco QRT Performance FIA Racing Seat FEATURES Manufacturer: Sparco Manufacturer part number: 008006RNR Color: Black Italian Leather and Black Alcantara QRT Technology – 30% Weight savings Ultra-light fiberglass composite shell Lower seating position that can fit taller/larger drivers Smaller outer dimensions for improved vehicle fitment Harness slots that can accommodate a wide range of drivers Hans device compatible Fire retardant fabric Special non-slip fabric FIA approved 8855-1999 Mounting: Side with special Sparco QRT side mounts SP-600QRT.

AiM MXG 1.3 Strada Color TFT Dash The Full-Size Color TFT Dash For Road Use MXG 1.3 Strada ("street" in Italian) is a beautifully-designed, feature-rich color digital dash display. It is basically the MXG 1.3 without the data-logging function. The MXG 1.3 Strada features a wide 7" High Contrast TFT color screen with great visual impact, configurable to show lap times, RPM, and a huge range of info coming from your Engine Control Unit, analog/digital inputs, pre-defined math channels and an optional GPS08 Module. Programmable multicolor shift and alarm LEDs round out an incredibly powerful package. The MXG 1.3 Strada displays your RPM, selected gear, speed, plus all the data you choose (water temp, oil pressure, trans temp, lap times and much more) in either pre-configured or user-customized pages. Swapping between pages is as easy as pushing buttons. Plus the MXG 1.3 Strada puts a huge amount of control over your car's systems at your fingertips. And you can choose the version with "Street Icon" LEDs in place of the standard LEDs! INPUT & OUTPUT FLEXIBILITY Eight fully configurable analog input channels can sample, log, and display a wide range of temperatures, pressures, and potentiometers (throttle position, steering wheel position, etc). Available only in a CAN/RS232 version for the maximum level of customization and data access. The CAN input allows you to further expand the dash by adding an almost limitless number of AiM CAN Data Hubs (Part No. MC-329, sold separately). These hubs let you connect other inputs such as Lambda Controller (O2), SmartyCam, or even channel expansion hubs, without using any analog channels. A separate CAN output allows you to send messages to your car's existing CAN network, adding to the vehicle system control possibilities! ALARMS & SHIFT LIGHTS The ten multicolored RGB shift lights can be customized to define the max RPM for each single gear. The same flexibility applies to the configurable RGB alarm LEDs: you can configure them to turn on/off depending on analog or digital inputs, ECU values, expansion values, math channels or GPS information (with the optional GPS08). You choose conditions, colors, and select a solid alarm or flashing one (including flash frequency). It's also possible to configure an accompanying text message. DIGITAL OUTPUT The MXG 1.3 Strada features a low-side (switch to ground) digital output that can be configured to activate/deactivate external systems (switch on/off additional lights, cooling fan relays, fluid circulation pumps, etc.) based on those inputs. RACE STUDIO 3 MXG 1.3 Strada is configured using your PC and Race Studio 3. You can create, customize, delete, import and export configurations with all channels, ECU drivers, Math Channels, Display Pages, Digital Output, Alarms, Shift Lights and all the expansions you need. TECHNICAL SPECS: 9.3" x 5.0" x 1.0" Anodized Aluminum housing Large 7.0" high-contrast color TFT display 800x480 pixel screen resolution Weight 2.1 lbs (950g) Waterproof IP65 KIT INCLUDES: MXG 1.3 Strada digital dash USB cable 14-pin standard wiring 23-pin connector + contacts Installation CD with Race Studio 3 software All sensors and modules sold separately.

Recaro Cross Sportster ORV Seat The Outdoor Adventurer! The RECARO Cross Sportster ORV (for "Off-Road Vehicle") is specially designed to address the requirements of go-anywhere, do-anything vehicles. The snug, supportive seat structure and side bolsters give you excellent shoulder and torso support, stabilizing the body against lateral forces, cocooning it like a second skin. The highly-effective vibration damping foam and the especially robust cover materials combine to keep you safe, comfortable, and confident when pushing your off-road vehicles to the limits. The Recaro Cross Sportster ORV features highly fire-resistant upholstery1 that comes in either black or black/grey premium Ambla vinyl. It is suitable for either 3- or 4-point belts or a 5- or 6-point harness. It can also be fitted with Recaro's heated-seat option for the ultimate in off-roading comfort. Recaro Seat Sliders for the Cross Sportster ORV can be found here. RECARO CROSS SPORTSTER ORV SEAT FEATURES AND BENEFITS Vibration damping foam Weather and abrasion resistant upholstery materials Flat seat cushion with low side bolsters Easy access for getting in and out of vehicle Sporty seat performance Specially formed shoulder support Belt slots for 3-, 4-, 5-and 6-point belts/harness Reclinable backrest Integrated headrest Manual backrest release for rear seat access RECARO CROSS SPORTSTER CS ORV SEAT SPECIFICATIONS Weight: Approximately 15.0 kg / 33.0 lbs. Max Height: 88.5 cm / 34.8 in. Materials: High-quality glass fiber-reinforced plastic, with a side of off-roading durability. Dimensions: Check the product photos, because size does matter. Made in Germany: Precision engineering at its finest. 1 The Recaro Cross Sportster ORV is not FIA or SFI approved for use in competition.

CMS Performance Roll Bar for S197 Mustang This Roll Bar Fits the Following Cars: Ford Mustang S197 (2005 -2014), all except convertible Click Here for Installation Instructions HANDS DOWN THE BEST ROLL BAR FOR THE S197 MUSTANG The CMS Performance S197 Mustang Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market. In designing the Mustang roll bar, safety, strength, and structural integrity were primary goals. That's why the CMS Performance S197 roll bar is fully TIG welded from ultra-strong Docol R8 Advanced High-Strength Steel sized 1.75" diam x 0.095" wall, vs. the mild-steel tubing others use. Docol R8 is 30-35% stronger than DOM mild steel and even 10-15% stronger than 4130 CrMo steel. This allowed us to design a roll bar that is stronger and lighter. Precision CNC machined interlocking roll bar clamps, made to our specifications in the USA, make joining the main hoop and kickers easier during installation while giving the CMS Performance roll bar a premium, finished look. INCREASE YOUR SAFETY AND LOOK GOOD DOING IT Safety is the main reason to install a roll bar in the first place. So the CMS Performance S197 Mustang Roll Bar is designed to place your harness shoulder straps at both the proper angle (0 to -20 ) and distance to the driver. The rear kickers bolt to a strong existing bulkhead, requiring no reinforcement plates beneath the floor pan. Our use of state-of-the-art Docol ultra-high-strength-steel tubing throughout allows us to keep the driver's rear view unobstructed by diagonal braces, which also keeps weight down. Every detail is engineered with safety and structural integrity as our primary goal. AMERICAN MADE AND HAND-CRAFTED COOL The second reason to install a roll bar is because it really complements the aggressive, race-inspired styling of the Mustang. We get that. So each bar is crafted by hand by master fabricators, TIG welded for the ultimate in durability, and custom powder coated in our facility (at no extra charge). We've color-matched powder to most of Ford's factory paint colors for a truly customized look, or you can choose from thousands of custom colors and finishes to give your car a personalized look that will last. Going from raw Docol tube stock to a gleaming finish, every roll bar is handcrafted by our most experienced cage- and race car builders. Nothing is left to chance. The CMS roll bar is designed to give you an unobstructed view through your rear window. None of your plastic interior trim needs to be removed or cut, just a little carpet that is hidden away. So if you ever need to put your car back to stock, it will look as though the roll bar was never there. EASY INSTALLATION AND OPTIONAL HARNESSES COMPLETE YOUR SAFETY UPGRADE Complete, detailed instructions make installation pretty simple (figure about two hours if you're reasonably handy; having a buddy helps!) All the supplied installation hardware is American made: Grade 8 mounting hardware and an industrial carbide drill bit. So you don't have worry that you don't have what you need for a flawless installation. You can add four-point Schroth Profi II ASM Harnesses specifically designed for use in cars with no sub-strap cut-through in the seat (like the Mustang). Many customers also add CMS Locking Harness Collars to keep harness shoulder straps right where you want them (they're not required for safety, but a lot of people like the look!). CMS PERFORMANCE S197 MUSTANG ROLL BAR DETAILS Manufacturer: CMS Performance Manufacturer part no.: PRB197 Materials: Docol R8 advanced high-strength steel tubing 1.75 x 0.095; CNC-cut carbon steel mounting plates; CNC-machined solid steel interlocking roll bar joints Construction: full penetration 360º TIG welding Design features: one-piece main hoop and three-piece rear kicker make installation simple; allows full seat travel with any seat Weight: 52 lbs. (23.6 kg) Designed, built, and powder-coated by CMS in the USA Includes all necessary hardware including carbide drill bit Roll bar installation in the Mustang requires removal of the rear seats. This product is intended for off-road use only.

Forgeline RS6 Centerlock The RS6 Centerlock wheel is a unique retro-look six-spoke wheel with a shallow concave profile and stepped-lip outer that is available exclusively for center lock applications. It was originally developed by Forgeline to debut on an award-winning 64 Corvette Coupe project commissioned by Barry Blomquist. The RS6 is a custom made-to-order three-piece wheel that is produced from forged 6061-T6 aluminum centers with heat-treated rim-shells and American-made stainless-steel ARP fasteners (in your choice of exposed through-bolt or hidden bolts with Heli-Coil inserts). And just like any Forgeline wheel, the RS6 is fully customizable in fitment and finish. (Note: The RS6 is ONLY available in center lock applications.) Developed in cooperation with the Roadster Shop Shallow concave profile Retro 6-Spoke design Centerlock applications only Three-piece modular construction Standard stepped-lip design Hidden stainless ARP fasteners (optional exposed fasteners also available) Heli-Coil inserts Forged 6061-T6 aluminum center Heat-treated rim shells Includes standard aluminum center cap Accommodates OEM TPMS and lug nuts/bolts Customizable fitment and finish options Legendary Forgeline quality

C3 Carbon Porsche GT2 RS / GT3 RS Front Brake NACA Ducts FITS: 991.2 Porsche GT2 RS and GT3 RS C3 Carbon offers this GT2 RS / GT3 RS 100% carbon fiber front NACA brake duct kit, giving you the uncompromising look, fitment, and finish to match your Porsche's factory carbon perfectly. You get replacements for the two NACA ducts on the exterior (top) of your front trunk bonnet and two replacements for the interior ducts on the bottom side. The NACA ducts match the 2x2 carbon weave on your Porsche's factory carbon, finished with either a high-gloss or smooth satin automotive urethane top coat. The interior ducts are matched to the weave and matte finish of the bonnet's underside. All four pieces are pure dry carbon fiber, no overlays. INCLUDES: Two NACA ducts (top side of bonnet) Two interior ducts (bottom side of bonnet) 3M VHB double-sided trim adhesive FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon Clear-coated with durable automotive urethane OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

SPA Technique Extreme Novec FIA Fire System 4.0kg The SPA Technique EX 4.0 is the lightweight, electrically-discharged fire system using 3M Novec 1230 agent that meets the FIA EX.029.09 rating. This system keeps weight to a minimum for the lightest-weight race cars that still need the ultimate in fire protection. This SPA Technique Extreme Novec 1230 4.0kg FIA EX029.09 certified fire system represents the next generation of race car fire suppression. Innovative 3M Novec 1230 suppressant is not only safer for your driver, but also easier on the environment. All while being non-conductive (so, safe for electronics) and leaving no residue to clean up. If you want the safest FIA-rated race car fire system, this SPA Technique Novec 1230 Extreme system is your first choice. Easy Installation with the Included System Kit Installation of your SPA Technique 4.0kg system is easy because this kit includes everything you need for a easy and safe installation. A completely filled FIA EX.0239.09 certified and labeled bottle is included, as are the two stainless steel retaining straps. For discharge, two simple-to-connect electrical discharge switches are included: one usually mounted externally on the cowl and the other in the cockpit near the driver. The cabling is long enough to mount the lightweight aluminum bottle where the driver and crew chief want it. This complete fire system also includes four nozzles, three T-fittings, one bulkhead fitting, and 10 feet of easy-to-install tubing. There is even a new "E" decal to make even the grumpiest tech chief happy. SPA Technique Novec fire systems are the perfect choice for drivers who need the best in FIA EX.029.09 certified fire safety. This pressurized fire system can only be shipped via Ground. SPA Technique Extreme Novec FIA Fire System 4.0kg Details: Manufacturer: SPA Technique Manufacturer part number: EX02909 Discharge 1: Electrical External Discharge 2: Electrical Internal Certification: FIA EX.029.09 Agent: Novec 1230 Toxic: No Conductive: No Clean-up required: No SPA Technique Extreme Novec FIA Fire System 4.0kg Benefits: Advanced 3M Novec 1230 fluid is safer and cleaner than other agents Great fire-out properties Non-toxic, so safe for driver Non-conductive, safe on all electronics No residue to clean-up Zero ozone depletion, making it safer for the environment SPA Technique Installation Kit Includes: Fully charged Novec 1230 bottle Four nozzles Three T-fittings One bulkhead fitting Two stainless steel mounting straps Ten feet of system tubing Electrical activation kit with two switches "E" sticker