All

Bell MAG-10 Carbon Fiber SA2025 Helmet The Bell MAG-10 Carbon is a lightweight open-face helmet for drivers who want carbon-shell performance, clear field of view, and all-day comfort in closed-cockpit and track-day environments. With modern ventilation, a long face shield, and hardware compatibility for coms and hydration, it’s a versatile choice for endurance, HPDE, and club racing. Carbon Performance with Open-Face Visibility The carbon shell helps reduce fatigue over long stints while the wide eyeport and long visor maximize peripheral vision and airflow. Factory M6 terminals support head-and-neck restraints. Interior materials are fire-resistant and designed for repeatable comfort and easy cleaning between sessions. Bell MAG-10 Carbon Fiber SA2025 Helmet Details Manufacturer: Bell Racing Helmets Construction: lightweight carbon fiber shell Orientation: open-face with long clear visor Homologation: FIA 8859-2024 and Snell SA2025 Hardware: factory-installed M6 HNR terminals Comms/Hydration: routing-ready (components optional) Finish: gloss carbon Bell MAG-10 Carbon Fiber SA2025 Helmet Features Open-face carbon design for low weight and wide, unobstructed vision Multi-density, multi-piece liner for impact energy management Long clear visor with anti-fog-ready compatibility and broad coverage Ventilation paths promote airflow for heat management in closed cabins Routing-ready for radio microphone, speakers, and hydration tube (optional kits) Factory M6 terminals for head-and-neck restraint systems Interior uses fire-resistant comfort fabrics for durability and easy care Bell MAG-10 Carbon Fiber SA2025 Helmet Size Chart Bell MAG-10 Carbon Fiber SA2025 Helmet FAQs Is the MAG-10 legal for my series?It carries FIA 8859-2024 and Snell SA2025. Most club and regional series accept these; always verify event rules. Who should choose an open-face helmet?Drivers in closed-cockpit cars who want maximum visibility, communication clarity, and reduced weight often prefer open-face designs. Does it include head-and-neck restraint anchors?Yes. M6 terminals are factory-installed for HNR compatibility. Can I add radio and hydration?Yes. The helmet is routing-ready for coms and drink tube hardware; add components to match your team’s setup. What visor options are available?A clear long visor is standard; tinted and specialty visors are available separately to suit lighting and preference. Can I wear glasses with this helmet?Yes. The open-face layout and liner shape accommodate most prescription frames comfortably. Get carbon-shell performance, wide-open vision, and race-ready versatility. Order the Bell MAG-10 Carbon today and head to grid with confidence. Finally, add the Discovery Parts Performance Racing Helmet Bag to your order to keep your new Bell MAG-10 auto racing helmet safe and secure going to and from the track, and throughout each race weekend.

Bell RS7-K Carbon Fiber Karting Helmet Push your karting performance with the Bell RS7-K Carbon, combining an ultra-light carbon shell, Formula-derived aerodynamics, and class-leading visibility and cooling. Purpose-built from the RS7 platform and inspired by the HP7, it delivers confidence for competitive kart racers at every level. FIA8878-2024/K2025 certified for karting, the RS7-K uses a recessed SE07 DSAF shield for clear vision and stability, an expansive eyeport for awareness, and a 14-channel ventilation system to keep you cool under pressure. Lightweight, sleek, and proven on track, it’s a top choice for serious karters. Based on the RS7C LTWT developed with Penske Racing, the RS7-K Carbon comes in under 2.75 lb race-ready. Its recessed shield improves aero and acoustic performance while the modern shell profile and optimized fit deliver comfort over long sessions. Key Features Aerospace-grade carbon fiber shell FIA8878-2024/K2025 karting certification Multi-density, multi-piece energy-absorbing liner Can be worn with or without included ear cups SE07 3 mm DSAF visor for anti-fog clarity — buy visor here Advanced 14-channel ventilation for maximum airflow Recessed shield/shell interface for reduced wind noise and better aero Optional accessories: rear spoiler, top gurney, chin bar gurney Non-fireproof, durable interior for kart-specific use Not compatible with head-and-neck restraint anchors Rubber gasket helps seal out dust and water Shield and pivot compatibility: SE07 3 mm, SV (SE07, SE077) Interior colors by special order: Black, Blue, Green, Red, Tan, Violet, White, Yellow Finish: Carbon Gloss Clear Sizes: 54 cm to 61 cm+ Bell RS7-K Helmet Sizing Chart Why Buy Here Authorized source for genuine Bell, expert fitment guidance, and fast shipping. Track-savvy support for kart racers, online or at the circuit. Bell RS7-K Carbon Fiber Karting Helmet FAQs What is the best helmet for kart racing? The RS7-K Carbon is widely regarded as a top performer thanks to its carbon shell, FIA8878-2024/K2025 certification, and advanced cooling and optics. How should I choose the right size? Measure around your head above the brows and compare to Bell’s chart. If between sizes, choose the snug fit that seats evenly around the crown and cheeks. What safety standard applies to karting?FIA8878-2024/K2025 is designed specifically for karting competition and is accepted by most series. DOT is for street use and is not a karting spec. Can I use a motorcycle helmet for karting?No. Use a motorsport karting helmet that meets FIA8878-2024/K2025 and provides kart-tuned ventilation and impact performance. How often should I replace my helmet?Follow manufacturer guidance; replace after any significant impact, visible damage, liner breakdown, or roughly every five years of regular use. How do I prevent visor fogging?Use Bell’s DSAF visor or an approved anti-fog insert and keep vents open. Avoid touching the inner anti-fog surface. Can I wear glasses with this helmet?Yes. The wide eyeport and liner shape accommodate most eyewear; ensure temples don’t create pressure points. Ready to race with clearer vision, lower weight, and better cooling? Order the Bell RS7-K Carbon and step up your karting program.

Stilo ST6 FN Composite Helmet SA2025 The Legendary Stilo FN Composite Helmet - Forever Ahead For over 25 years, Stilo has lead the way in racing helmet innovation and the new ST6 line marks a bold new chapter. With input from Porsche and F1 teams, Stilo developed enhanced front- and top aerodynamics to deliver exceptional performance from the new Stilo ST6 line of helmets. Developed with the world's top drivers from Formula One and endurance racing, the ST6 reflects real-world needs at every level of auto racing. The Stilo ST6 composite helmet is one of the lightest composite helmets on the market. It features enhanced airflow, visibility, and comfort while maintaining market-leading safety standards. Developed with input from the Aston Martin F1 team, every feature of the ST6 – from the track-tested aerodynamics to the cutting edge dual-lock visor system – is designed to give racers a performance edge. The brand new Stilo ST6 helmet improves on the market-leading Stilo ST5 in every way, including the following: 10% lighter than Stilo ST5 26% more airflow than Stilo ST5 11% more visibility More comfortable liner and cheek pads More shell sizes for lower weight Improved visor construction for durability and ease of care Higher-quality visor hardware increases reliability Stilo ST6 FN Composite Auto Racing Helmet Features Puro Tech: Stilo's proprietary carbon fiber manufacturing process eliminates the need for extra lacquers and additional coatings, minimizing the weight of your new helmet. With the Puro process, Stilo delivers the lightest and safest helmet on the market. Added Shell Size: now offered in four shell sizes, the Stilo ST6 FN auto racing helmet gives you the lightest and smallest shell size possible for your head shape. Increased Airflow Design: by utilizing key partnerships with Formula One teams, Stilo has redesigned the ST6 front ventilation to increase airflow while maximizing safety. The new Stilo ST6 also comes standard with ventilation holes in the top, channeling airflow through the EPS foam to reduce sweat and moisture, keeping you performing at your best. Increased Downward Visibility: with input from professional drivers around the globe, Stilo has increased the downward field-of-view of the Stilo ST6, making harness fastening easier during driver changes and giving you greater situational awareness on the track. Interior Comfort: new and improved cheek padding in the Stilo ST6 was designed to enhance aero stability and increase comfort. Injection Molded Visor: the brand new visors for the ST6 provide exceptionally clear visibility and are coated in a new high-performance, washable anti-fog treatment. Dual Visor Lock: pioneering the industry, the dual visor lock on the Stilo ST6 complies with FIA standards in both the fully closed and ventilation positions. Updated Visor Hardware: engineered for easier visor installation and smoother actuation, this visor hardware can be purchased in a variety of anodized finishes. What’s Changing in SA2025 Auto Racing Helmets? SA2025 helmets are here, and while the changes may not be groundbreaking, they represent an important evolution in motorsport safety. According to the Snell Memorial Foundation, the SA2025 standard is an evolutionary update from SA2020—not a complete overhaul. Unlike the M2025 motorcycle standard, which adds rotational impact testing, the SA2025 auto racing helmet standard does not include rotational force requirements. Key SA2025 Helmet Safety Enhancements: Increased Impact Protection: SA2025 helmets are required to handle slightly higher impact speeds and achieve lower maximum peak G-force thresholds across all head-form sizes. Global FIA Alignment: These updated requirements bring the SA2025 standard into alignment with the new FIA 8859-2024 helmet safety regulation, creating more consistency across international motorsports. In short: SA2025 helmets are designed to offer enhanced linear impact protection, making them the safest Snell-rated auto racing helmets to date. Whether you're a competitive racer or a weekend track day enthusiast, upgrading to an SA2025-certified helmet ensures compliance with future racing regulations and gives you peace of mind at speed. Stilo Helmets ST6 FN Composite Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0810AF2V Homologation: FIA 8858-2015 Certification: Snell SA2020 Compatible shields: Stilo ST6 helmet shields Noise-attenuating earmuffs included Other Versions of the Stilo ST6 Racing Helmet Stilo ST6 GT Composite Helmet Stilo ST6 GT SA2020 Carbon Fiber Helmet Stilo Helmet ST6 FN 8859-ABP Helmet Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Zero ABP 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Composite Helmet Stilo ST6 FN 8859-ABP Helmet Stilo ST6 GT 8860 Carbon Fiber Helmet Stilo ST6 FN 8860 Carbon Fiber Helmet Stilo ST6 FN 8860-ABP Carbon Fiber Helmet Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Composite Auto Racing Helmet Sizing Note We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 61, which uses the large shell. Please order accordingly.   Measuring Your Head For Your New Stilo ST6 FN Composite Helmet The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Stilo ST6 GT Composite Helmet SA2025 The legendary Stilo composite—lighter, cooler, clearer For over 25 years, Stilo has led racing-helmet innovation and the ST6 line marks a bold new chapter. With input from top programs, engineers refined front and top aerodynamics for stability at speed. The ST6 GT Composite emphasizes airflow, visibility, and long-stint comfort while meeting modern safety targets. From track-tested aero to a dual-lock visor system, every update is about confidence in the car. The ST6 improves on the market-leading ST5 in key areas: ~10% lighter than Stilo ST5 ~26% more airflow than Stilo ST5 ~11% wider downward visibility Refined liner and cheek pads More shell sizes to optimize weight Reworked visor construction for durability and easy care Updated visor hardware for smoother actuation Stilo ST6 GT Composite Auto Racing Helmet Features Puro Tech: Stilo's composite process minimizes extra coatings to reduce mass without compromising protection. Added shell size: now offered in three shell sizes, the ST6 GT helps deliver the smallest, lightest shell appropriate for your head size. STILO ST6 GT HELMET SIZE AND PAD CHART FOR CUSTOMIZATION Increased airflow design: redesigned front intake and top vents route air through EPS channels to reduce sweat and moisture. Increased downward visibility: a wider field of view speeds up belt fastening and improves situational awareness. Interior comfort: revised cheek padding stabilizes fit and comfort at speed. Injection molded visor: clear optics with a washable high-performance anti-fog treatment. Dual visor lock: compliant with FIA standards in both closed and vent positions. Updated visor hardware: smoother actuation and easier installation; available in anodized finishes. Stilo Helmets ST6 GT Composite Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0800AF2X Homologation: FIA 8858-2015 Certification: Snell SA2025 Compatible shields: Stilo ST6 helmet shields Noise-attenuating earmuffs Stilo ST6 Size & Measurement Customers who typically wear a size 59 in other brands are often most comfortable in a Stilo size 61 (large shell). If you’re between sizes, many drivers prefer the tighter option for stability. What’s Changing in SA2025 Auto Racing Helmets? SA2025 helmets are here, and while the changes may not be groundbreaking, they represent an important evolution in motorsport safety. According to the Snell Memorial Foundation, the SA2025 standard is an evolutionary update from SA2020—not a complete overhaul. Unlike the M2025 motorcycle standard, which adds rotational impact testing, the SA2025 auto racing helmet standard does not include rotational force requirements. Key SA2025 Helmet Safety Enhancements: Increased Impact Protection: SA2025 helmets are required to handle slightly higher impact speeds and achieve lower maximum peak G-force thresholds across all head-form sizes. Global FIA Alignment: These updated requirements bring the SA2025 standard into alignment with the new FIA 8859-2024 helmet safety regulation, creating more consistency across international motorsports. In short: SA2025 helmets are designed to offer enhanced linear impact protection, making them the safest Snell-rated auto racing helmets to date. Whether you're a competitive racer or a weekend track day enthusiast, upgrading to an SA2025-certified helmet ensures compliance with future racing regulations and gives you peace of mind at speed. Stilo ST6 GT Composite SA2025 Helmet FAQs Is this Snell SA2025 certified? Yes, this listing reflects SA2025 certification for U.S. auto racing. What’s the difference between GT and FN? GT includes earmuffs for noise reduction and comms; FN is open-ear for maximum awareness and airflow. Can I reuse ST5 shields? No, the ST6 uses its own shield family; choose ST6-specific shields and hardware. Ships with signature required.

Simpson Custom Hybrid S FHR Device The Hybrid S from Simpson features a lightweight design using DuPont carbon/polymer construction and provides maximum comfort and maneuverability with superior strength. Simpson Hybrids come race-ready. The trusted low profile design disappears into the seat when worn and allows for easy in and out of the race car, eliminating the danger of becoming caught in other gear. The protection stays with the racer during multiple impacts, flips and rolls. This is a custom made to measure device that will be made to your exact dimensions. Your custom device is usually ready to ship within 14 days. Fill out the required fields and let us make you the most comfortable SFI 38.1 helmet restraint you will ever wear. Steps to Measuring Your Custom Simpson Hybrid S: Wear your racing suit or normal HPDE driving apparel and measure over your outermost layer. Step 1: Measure just below the bottom of the chest all the way around. Fill in this number in inches (including fractions) or centimeters. Step 2: Measure from top of shoulder to the bottom of the chest (as in Step 1). Fill in this number in inches (including fractions) or centimeters. Simpson Hybrid S HNR Product Details Manufacturer: Simpson Manufacturer part number: SIM-HYS-CUSTOM High quality carbon fiber construction Multiple load paths to dissipate head loads Buckle attachment in front. No bulky straps underneath Connects to standard HANS Post Anchors, not included Legal for NASA, PCA, SCCA, BMWCCA, SCCA Pro, IMSA, SRO, NHRA SFI 38.1 and FIA 8858-2010 certification when used with multi-point racing harnesses only Designed for use with OEM three-point seat belts Available with patent pending multi-tether system to enhance side to side movement Sleek, modern profile with defined wings for seatbelt containment Select your size based on the size chart Simpson Hybrid S Head and Neck Restraint  Advanced Protection for 3-Point and Multi-Point Harness Systems The Simpson's Hybrid S model 3-Point Head and Neck Restraint is the only head restraint on the market proven to offer protection with both three-point OEM seat belts and multi-point racing harnesses. It was specifically designed and tested for use with OEM three-point seat belts. This innovative head and neck restraint device also meets FMVSS testing standards for compatibility with 3-point belt setups—making it the ideal solution for high-performance driving instructors, automotive test engineers, and track day enthusiasts who want next-level safety without needing to retrofit a full race cockpit. FIA and SFI approval require the use of a five-, six-, or seven-point racing harness system. Designed for superior protection in street cars and club racing vehicles, the Simpson's Hybrid S model features a low-profile, high-strength carbon fiber construction that won’t interfere with roll bars during emergency exits. Multiple load paths help dissipate energy in a crash, while the front-mounted buckle system eliminates bulky straps underneath, providing all-day comfort. Whether you're in a fully prepped race car or a manufacturer test mule, the Simpson's Hybrid S model bridges the gap between OEM safety systems and motorsport-grade head restraint. Simpson Hybrid S HNR Product Highlights SFI 38.1 and FIA 8858-2010 certified with multi-point harnesses FMVSS-tested and approved for use with 3-point OEM seat belts Carbon fiber construction for strength, light weight, and comfort Low-profile design for easier entry, exit, and roll cage clearance Easy front buckle system—no bulky straps under the seat or back

Alpinestars GP Pro Comp v2 Driver Race Suit (Boot Cuff) The Alpinestars GP Pro Comp v2 race suit features an outer shell of Nomex material developed exclusively for Alpinestars, combined with a soft aramidic base knit lining for optimum levels of heat- and fire protection, light weight, and driver comfort. Thanks to the introduction of an open weave structure in the aramidic base lining, the Alpinestars GP Pro Comp v2 delivers excellent breathability. This is further reinforced by strategically-positioned knitted, stretchable, open-mesh panels on the back, crotch and armholes, giving the wearer additional air flow and flexibility. The Alpinestars GP Pro Comp v2 race suit also incorporates innovative silicon grip detailing on the shoulders and lower back to prevent movement within the racing seat, help keep your HANS device in position, and reduce pressure on the shoulders. ALPINESTARS GP PRO COMP V2 RACE SUIT DETAILS Certified to the SFI 3.2A/5 standard Lightweight and breathable multi-layer suit incorporating mesh stretch panels for maximum comfort and effective body temperature regulation Innovative silicon grip details on shoulders and lower back to provide more feeling/connection with the HANS device and racing seat Formula One derived cable opening for cooling shirt hoses or communication wiring on the left of the body, covered by a self-closing flap to ensure maximum protection Strategically positioned Formula One derived stretch mesh panels on the lower back and crotch for enhanced flexibility, both in and out of the car ALPINESTARS GP PRO COMP V2 RACE SUIT CONSTRUCTION Alpinestars fully-floating arm construction with stretchable knit fabric ensures minimal material resistance while driving 100% aramidic antistatic outer shell fabric for exceptional heat- and flame-resistance Ribbed wrist and ankle cuffs for maximum comfort Tall ribbed collar extends coverage of the neck, improving driver comfort and safety Alpinestars exclusive shoulder epaulette construction provides for the extraction of the driver in the event of a crash Premium YKK metal zipper with double slider Thigh pockets for convenient, unobtrusive storage "ALPINESTARS PROTECTS" slogan on the lower back of the lining, as used on Alpinestars F1 racing suits Includes laundry bag for convenience and effective material fiber protection Athletic/regular fit Weight: 345 g/m2 ALPINESTARS GP PRO COMP V2 RACE SUIT SIZE CHART

Alpinestars Stella GP Pro Comp v2 Women's Driver Race Suit The Stella GP Pro Comp v2 race suit for women features an outer shell material developed exclusively for Alpinestars which is combined with a soft aramidic base knit lining for optimum levels of comfort, protection, and light weight. Thanks to the introduction of this aramidic base lining, with its open-weave structure, the Stella GP Pro Comp v2 race suit delivers excellent breathability, which is further reinforced by strategically-positioned knitted, stretchable open mesh panels on the back, crotch, and armholes for additional airflow and flexibility both in and out of the car. The Alpinestars Stella GP Pro Comp v2 race suit also incorporates innovative silicon grip technology applied to the shoulders and lower back to prevent any movement within your racing seat. This also helps keep your HANS device in place and helps reduce pressure on the shoulders. ALPINESTARS STELLA GP PRO COMP V2 RACE SUIT DETAILS Certified to the latest FIA 8856-2018 homologation standard Female anatomical torso, leg, and arm paneling is patterned for optimum driving position fit Lightweight, breathable multi-layer suit incorporating mesh stretch panels for maximum comfort and effective body temperature regulation Innovative silicon grip detailing on shoulders and lower back to provide better feel from the racing seat and connection to the HANS device Strategically positioned Formula One derived stretch mesh panels on the lower back and crotch for enhanced flexibility ALPINESTARS STELLA GP PRO COMP V2 RACE SUIT CONSTRUCTION Alpinestars fully-floating arm construction with stretchable knit fabric ensures minimal material resistance while driving 100% aramidic antistatic outer shell fabric for exceptional heat- and flame-resistance Ribbed wrist and ankle cuffs for maximum comfort Tall ribbed collar extends coverage of the neck and improves driver comfort Alpinestars exclusive shoulder epaulette construction provides for the extraction of the driver in the event of a crash Premium YKK metal zipper with double sliders Thigh pockets for convenient, unobtrusive storage "ALPINESTARS PROTECTS" slogan on the lower back of the lining, as used on Alpinestars F1 racing suits Comes with a laundry bag for convenience and effective material fiber protection Athletic/regular fit Weight 345 g/m2 ALPINESTARS STELLA GP PRO COMP V2 RACE SUIT SIZE CHART

Alpinestars GP Pro Comp v2 Driver Race Suit The Alpinestars GP Pro Comp v2 race suit features an outer shell of Nomex material developed exclusively for Alpinestars, combined with a soft aramidic base knit lining for optimum levels of heat- and fire protection, light weight, and driver comfort. Thanks to the introduction of an open weave structure in the aramidic base lining, the Alpinestars GP Pro Comp v2 delivers excellent breathability. This is further reinforced by strategically-positioned knitted, stretchable, open-mesh panels on the back, crotch and armholes, giving the wearer additional air flow and flexibility. The Alpinestars GP Pro Comp v2 race suit also incorporates innovative silicon grip detailing on the shoulders and lower back to prevent movement within the racing seat, help keep your HANS device in position, and reduce pressure on the shoulders. ALPINESTARS GP PRO COMP V2 RACE SUIT DETAILS Certified to the SFI 3.4/5 standard Lightweight and breathable multi-layer suit incorporating mesh stretch panels for maximum comfort and effective body temperature regulation Innovative silicon grip details on shoulders and lower back to provide more feeling/connection with the HANS device and racing seat Formula One derived cable opening for cooling shirt hoses or communication wiring on the left of the body, covered by a self-closing flap to ensure maximum protection Strategically positioned Formula One derived stretch mesh panels on the lower back and crotch for enhanced flexibility, both in and out of the car ALPINESTARS GP PRO COMP V2 RACE SUIT CONSTRUCTION Alpinestars fully-floating arm construction with stretchable knit fabric ensures minimal material resistance while driving 100% aramidic antistatic outer shell fabric for exceptional heat- and flame-resistance Ribbed wrist and ankle cuffs for maximum comfort Tall ribbed collar extends coverage of the neck, improving driver comfort and safety Alpinestars exclusive shoulder epaulette construction provides for the extraction of the driver in the event of a crash Premium YKK metal zipper with double slider Thigh pockets for convenient, unobtrusive storage "ALPINESTARS PROTECTS" slogan on the lower back of the lining, as used on Alpinestars F1 racing suits Includes laundry bag for convenience and effective material fiber protection Athletic/regular fit Weight: 345 g/m2 ALPINESTARS GP PRO COMP V2 RACE SUIT SIZE CHART

Schuberth SP1 Hybrid SA 2025 Helmet LIMITED AVAILABILTY, CONTACT US TO CONFIRM SHIPMENT DATES Snell SA2025, FIA 8859-2024, FIA 8878-2024, and K2025 Certified A new era of helmets is here... introducing the SCHUBERTH PERFORMANCE SP1 HYBRID.  SCHUBERTH SP1 HYBRID INNOVATIVE COMPOSITION The SP1 HYBRID is the first hybrid helmet from SCHUBERTH complying with the strict FIA 8859-2024, FIA 8878-2024, K2025 and SNELL SA2025 homologations.  Directly derived from the SP1 CARBON Evo, in the SP1 HYBRID, we blended pre-preg carbon and fiberglass materials to give rise to a completely new species of SCHUBERTH helmets. SCHUBERTH SP1 HYBRID FULL COMPATIBILITY Like all SCHUBERTH helmets, compatibility is one of the defining characteristics of the SP1 HYBRID.  The SP1 HYBRID can be fully customized with SCHUBERTH accessories to meet all drivers’ needs and preferences. SCHUBERTH SP1 HYBRID SAME PHILOSOPHY, SAME EFFORT The attention to details and the passion that goes into the SP1 HYBRID is the same we put in all our helmets. The result is a carefully-crafted blend of robustness, design and technology. SCHUBERTH SP1 HYBRID SCHUBERTH DUAL LOCKING (SDL) System The all-new SDL System represents another proof of our commitment to combining superior solidity with dual-stage visor opening.  The ventilation stage will guarantee the same safety as the total closure for a comfort like no other, also during the most challenging races. SCHUBERTH SP1 HYBRID COMMUNICATION SYSTEM READY Radio communication systems are seamlessly integrated using proven techniques such as cable ducts in the cheek pads and recessed indents that provide a comfortable spot for the ears.  A full selection of plug&play integrated electronics are available as an option. SCHUBERTH SP1 HYBRID EXCEPTIONAL COMFORT Comfort has been carefully studied, taking advantage of the extensive experience we gained over the years at the pinnacle of motorsport. The result is unparalleled lightness and a completely new standard of comfort. SCHUBERTH HYBRID HELMET AERO AND VENTILATION The SP1 Hybrid Helmet was developed with extensive wind tunnel testing to achieve ideal aerodynamics and optimum air flow. It offers a perfect aerodynamic balance that can be customized with various spoilers and ventilation scoops to meet the requirements of every type of racing. With 12 ventilation channels across the SP1's shell, optimum circulation is achieved through aerodynamic design and air flow channels built into the EPS (interior padding), providing the ideal flow for intake of cool air and exhaust of hot air. SCHUBERTH SP1 HYBRID HELMET COMMUNICATION SYSTEM READY Channels in the cheek pads allow for easy installation of radio communications. A full selection of plug & play integrated electronics are available as options. From comfortable ear cup speakers to a 3.5mm jack for your ear buds -- or a system with both! -- you can choose a mic integrated into your chin pad or a boom mic. Schuberth helmet communications options make it easy to seamlessly integrate your race comms. SCHUBERTH SP1 HYBRID SHELL AND VISOR SHIELD Every SP1 Hybrid helmet is produced in Schuberth's own factory in Italy, by the same hands that produce the masterpiece SF4 FIA 8860-2018 ABP helmets used by many F1 drivers. The Schuberth SP1 Hybrid uses an exclusive, blended pre-preg carbon and fiberglass materials handcrafted to create a unique helmet combining light weight, solid construction and superior safety in an iconic design. The Schuberth SP1 Hybrid's 3D Injected visor is directly derived from their F1 expertise, offering 12 hues ranging from transparent to dark with several mirroring and multi-layered coating options. All standard visors are Pinlock 120 lens equipped for optimum fog resistant performance. External tear-off buttons are also installed.  

OMP WRC-R Containment Seat with M-Rain Pattern Introducing the OMP WRC-R Containment Seat with custom printed M-Rain Pattern, inspired by BMW Motorsport. The meticulously matched colors and classic M-Rain style pattern are sure to turn heads while providing the safety and comfort demanded on track. Designed as a professional racing seat without a head restraint, the WRC-R is ideal for drivers who want a supportive, FIA-homologated seat that blends performance with motorsport heritage. Iconic M-Rain Fabric and Modern Comfort The special edition M-Rain fabric brings a timeless BMW motorsport look while using high-breathable AIRTEX® material to keep drivers cooler and more comfortable. Combined with advanced ergonomic shaping and removable cushions, this seat is built for serious driving sessions. Features • Gel-coated fiberglass shell with side mounting points• Custom printed M-Rain fabric inspired by BMW Motorsport• Upholstered in high-breathability AIRTEX® material• Large shoulder harness slots to suit drivers of varying heights• High side bolsters for superior lateral leg support• Removable back, base, and split leg cushions for personalized fit• HANS® and HSC PATENT compatible• FIA 8855-1999 homologation for motorsport use• FIA standards require installation with at least 4 M8 x 1.25 class 8.8 bolts OMP WRC-R M-Rain Seat FAQs: What makes the M-Rain version special? The M-Rain pattern is inspired by BMW Motorsport, featuring matched colors and a classic racing aesthetic available only on the standard size WRC-R. What size drivers does this seat fit? The WRC-R is best suited for drivers up to about a 36" waist. For larger drivers, the XL version of the WRC-R is recommended, though it does not feature the M-Rain fabric. Is this seat compatible with a HANS device? Yes, the WRC-R Containment Seat is fully compatible with HANS and other head and neck restraint systems. Does this seat include side mounts? Side mounts are sold separately. The seat features FIA-compliant side mounting points for secure installation. The OMP WRC-R Containment Seat with M-Rain Fabric combines FIA-approved safety, modern comfort, and classic BMW motorsport style, making it a standout choice for track and racing enthusiasts.

Paragon Viking Pro Air & Water Cooling Bundle The Paragon Viking Pro Air & Water Bundle can be used with any Paragon cooling garment. It effectively sends temperature-controlled cooling water through the garment along with blower-enhanced, cooled, HEPA-4 filtered air to your helmet.  The Paragon Viking Pro Air & Water Bundle provides 300 Watts (1,023 BTU) of continuous cooling per hour. Its 240 CFM blower and 12- or 18-Liter cooler unit with internal pump deliver temperature-controlled cool water to your Paragon cooling garment (sold separately) and chilled air to your helmet. Eight feet of double-insulated water hose, complete with dry quick-disconnects and an automatic shutoff, attach your cooling shirt to the unit. Paragon Viking Pro Air & Water Bundle Details Manufacturer: Paragon Paragon 12- or 18-liter cooler with internal 12V fluid pump Cooler mounting tray with two straps 8-foot insulated Guardian water supply hose with dry-break disconnects 240 CFM air blower 10 foot x 1.25" air hose 5 foot x 3.0" air hose 1.25" hose end fittings (2) Angled helmet fitting 4" blower hose fitting 4" blower filter housing fitting Blower air filter Blower air filter screen Everlast Ice cool pack Defense Solution (16 oz.) Paragon cooling garments sold separately.

Stilo Venti4 WRC Composite White SA2025 FIA 8859 Rally Helmet Factory-Integrated Rally Communications in a Composite Open-Face Helmet The Stilo Venti4 WRC Composite White SA2025 FIA 8859 Rally Helmet is designed for drivers and co-drivers who need clear in-car communication, open-face visibility, and current race-ready certification. Built on Stilo’s proven Venti WRC platform, this gloss white composite helmet includes integrated intercom hardware, an improved microphone boom shape, and factory-fitted HANS post anchors for serious rally and performance driving use. Stilo’s Venti4 WRC line is an evolution of the championship-proven WRC helmet family, now offered with Snell SA2025 and FIA 8859-2024 certification. The composite shell construction keeps this helmet positioned as a strong value within Stilo’s premium rally range, while the adjustable peak and short-visor compatibility help tailor visibility to changing stage conditions. Stilo Venti4 WRC Features Snell SA2025 approved open-face motorsports helmet FIA 8859-2024 certified Prepreg composite shell construction Gloss white finish Built-in Stilo rally intercom system Improved microphone boom shape designed to deflect cabin noise Compatible with WRC intercom systems Factory-fitted HANS post anchors Adjustable peak for improved visibility in changing light Compatible with optional short visors Speaker compatible with speaker cutouts Wired for audio Black Nomex interior liner Removable interior padding Double D-ring chin strap Helmet bag included Sold individually Built for Rally Communication The Venti4 WRC Composite White is engineered around the communication demands of rally competition. Its factory-integrated intercom setup and refined microphone boom shape are designed to improve voice clarity in noisy cabins, helping drivers and co-drivers stay connected through rough stages, quick notes, and high-concentration sections. Open-Face Visibility with Adjustable Peak Control Rally drivers often need a wide, unobstructed field of view, and the Venti WRC platform delivers that classic open-face layout. The adjustable peak helps manage overhead glare, while compatibility with optional short visors gives racers another way to refine visibility for their preferred cockpit setup. Modern Certification with HANS Anchors Included Stilo lists this Venti4 WRC Composite White helmet with Snell SA2025 and FIA 8859-2024 approval, along with factory-fitted HANS post anchors. That combination makes it a purpose-built choice for competitors who want a current-generation rally helmet with key safety hardware already integrated. Stilo Venti4 WRC Specifications Brand: Stilo Model: Venti4 WRC Composite White SA2025 8859 Helmet Family: Venti WRC Helmet Type: Open Face Auto Racing Helmet Certification Rating: Snell SA2025 and FIA 8859-2024 Outer Shell Material: Composite Finish: Gloss Graphic Design: Gloss White Shell Color: White Face Shield Included: No - Sold Separately Shield Release Mechanism: Not Applicable Head and Neck Restraint Compatible: Yes Factory-Fitted HANS Post Anchors: Yes Interior Liner Material: Nomex Interior Liner Color: Black Removable Inside Liner: Yes Intercom Included: Yes Speaker Compatible: Yes Speaker Cutouts: Yes Wired for Audio: Yes Internal Sun Visor Included: No Tear-Off Post Compatible: No Tear-Off Posts Included: No Chin Strap Type: Double D Ring Ventilation: Yes Helmet Bag Included: Yes Quantity Sold: Individually Stilo Venti4 WRC FAQs Does the Stilo Venti4 WRC Composite White helmet include communications?Yes. Stilo lists this Venti4 WRC model with a built-in intercom system, speaker compatibility, speaker cutouts, and wired-for-audio construction. What certifications does this Venti4 WRC helmet carry?Stilo lists the helmet with Snell SA2025 approval and FIA 8859-2024 certification. Are HANS posts included on this helmet?Yes. Stilo states that the Venti WRC platform includes factory-fitted HANS post anchors. Does it come with a face shield?No. Stilo lists the face shield as not included and sold separately. The helmet is compatible with optional short visors. What is the purpose of the adjustable peak?The adjustable peak is designed to help optimize visibility in changing light conditions during motorsports use. Why is the microphone boom shape different on the Venti4 WRC?Stilo says the updated boom shape is designed to better deflect cabin noise for clearer driver and co-driver communication. The Stilo Venti4 WRC Composite White SA2025 FIA 8859 Rally Helmet combines professional rally communication features, modern certification, and Stilo’s iconic open-face WRC design for drivers who want confidence, clarity, and competition-ready refinement.

Forgeline FF3 The Forgeline FF3 Heritage Series wheel is a basic 5-spoke design that mimics the simple, blocky styles that were popular in the late 1990s. It features a flat face profile, spokes that taper to a narrower width at the rim register, chamfered edges, and Forgeline's small engraved center cap. Though it looks like a throwback to another era, the FF3 is a modern 3-piece wheel manufactured from fully forged 6061-T6 aluminum centers using the latest engineering and manufacturing technology. The FF3 is built with true forged 6061-T6 aluminum centers, aircraft-quality ARP stainless steel hidden fasteners, and heat-treated rim sections. The FF3 is available with a stepped lip outer in 17-inch, 18-inch, 19-inch, and 20-inch fitments and features a standard powder coated center finish with a polished outer rim. But since each wheel is custom built-to-order, Forgeline can also offer special features like custom offsets, center locking hubs, and a large choice of finish combinations. Three-Piece Heritage Series Wheel Flat Profile 5-Spoke Design Stepped-Lip Outer Hidden ARP Fasteners Forged 6061-T6 Aluminum Center Heat-Treated Rim Shells Includes Our Small Engraved Aluminum Center Cap Customizable Fitment and Finish Options Legendary Forgeline Quality and Customer Service

Forgeline CR3 The Forgeline CR3 Heritage Series wheel is a throwback to one of the most iconic and popular 5-spoke wheel designs in the history of hod rodding. But unlike its predecessors, the CR3 is a modern 3-piece wheel that is manufactured from fully forged 6061-T6 aluminum centers using the latest engineering and manufacturing technology. A traditional five-spoke design with inverted tapered spokes and smooth edges, the CR3 evokes a traditional muscle car flavor while delivering modern technology and performance. The CR3 is built with true forged 6061-T6 aluminum centers, aircraft-quality ARP stainless steel hidden fasteners, and heat-treated rim sections. The CR3 is available with a stepped lip outer in 17-inch, 18-inch, 19-inch, and 20-inch fitments and features a standard powder coated center finish with a polished outer rim. But since each wheel is custom built-to-order, Forgeline can also offer special features like custom offsets, center locking hubs, and a large choice of finish combinations. Three-Piece Heritage Series Wheel Iconic 5-Spoke Design Stepped-Lip Outer Hidden ARP Fasteners Forged 6061-T6 Aluminum Center Heat-Treated Rim Shells Includes Standard Aluminum Center Cap Customizable Fitment and Finish Options Legendary Forgeline Quality and Customer Service

Forgeline LS3 The Forgeline LS3 Heritage Series wheel pays homage to one of Forgeline's very first wheel designs, the classic LS of the 1990s. This instantly-recognizable classic has been reborn here as a modern 3-piece wheel with updated engineering and manufacturing technology. A tight-mesh design with very intricate machining details, the LS3 is elegant and timeless. The LS3 is built with true forged 6061-T6 aluminum centers, aircraft-quality ARP stainless steel fasteners (your choice of exposed or hidden), and heat-treated rim sections. The LS3 is available with a stepped lip outer in 17-inch, 18-inch, and 19-inch fitments and features a standard powder coated center finish with a polished outer rim. But since each wheel is custom built-to-order, we can also offer special features like custom offsets, center locking hubs, and a large choice of finish combinations. Three-Piece Heritage Series Wheel Classic Tight Mesh Design is Elegant and Timeless Stepped-Lip Outer Your Choice of Exposed or Hidden ARP Fasteners Forged 6061-T6 Aluminum Center Heat-Treated Rim Shells Includes Standard Aluminum Center Cap Customizable Fitment and Finish Options Legendary Forgeline Quality and Customer Service

Forgeline RS3 The Forgeline RS3 Heritage Series wheel pays homage to their very first wheel design, the classic Forgeline RS of the 1990s. It has been reborn here as a modern 3-piece wheel with updated engineering and manufacturing technology. A traditional five-spoke design with tapered spokes, smooth edges, and flowing organic lines, the RS3 is muscular yet sophisticated. The RS3 is built with true forged 6061-T6 aluminum centers, aircraft-quality ARP stainless steel fasteners (your choice of exposed or hidden), and heat-treated rim sections. The RS3 is available with a stepped lip outer in 18-inch and 19-inch fitments and features a standard powder coated center finish with a polished outer rim. But since each wheel is custom built-to-order, we can also offer special features like custom offsets, center locking hubs, and a large choice of finish combinations. Three-Piece Heritage Series Wheel Traditional 5-Spoke Design is Muscular and Sophisticated Stepped-Lip Outer Your Choice of Exposed or Hidden ARP Fasteners Forged 6061-T6 Aluminum Center Heat-Treated Rim Shells Includes Standard Aluminum Center Cap Customizable Fitment and Finish Options Legendary Forgeline Quality and Customer Service