All

Pagid Racing Brake Pad Shape No. 8253 Fits the Following Vehicles: Make Model Build (Year) Front Rear Alfa Romeo Giulia 2.9 (952) Quadrifoglio [ceramic brakes] 2017 - 23     X Chevrolet Camaro ZL1 and ZL1 1LE (Gen 6) 2017 - 24     X Dodge Viper ACR [ceramic brakes] 2016 - 17     X Ford Ford GT (Gen 2) [ceramic brakes] 2017 - 22     X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RSL 1 Compound: Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSC 1 Compound (Ceramic Rotors Only): A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 2 Compound (Ceramic Rotors Only): Pagid RSC 2 is a special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing. RSC 2 is a low metallic resin bonded material containing steel and aramid fibers. This material is specifically developed for above mentioned applications.

Ferodo FRP3144ZB DSUNO AP CP9660 & CP9661 Caliper Brake Pads Fitting the AP Racing CP5060, CP5555, CP 9660 & CP9661 Caliper, the Ferodo FRP3144Z in the DSUNO compound is a medium torque, endurance brake pad. From the working temperature of 392 F to 1382 F, the Ferodo DSUNO features a predictable torque curve with an average friction coefficient of 0.48µ. With a wide temperature range and level torque curve, the Ferodo DSUNO is a popular mid-distance endurance race and track day pad. Ferodo FRP3144Z DSUNO Details: Manufacturer: Ferodo Manufacturer part number: FRP3144ZB-N Compound: DSUNO Primary Use: Mid range endurance 6~ hours, track days Street use: No Track only: Yes Application: All vehicle types Average Coefficient of Friction: 0.48µ Temperature Range C: 200 - 750 C Temperature Range F: 392 - 1382 F Compatible with ceramic discs: No Compatible with iron discs: Yes Ferodo DSUNO Brake Compound Details:The Ferodo DSUNO is a predictable mid-endurance compound designed for repeatable stopping, lap after lap. Featuring one of the flattest torque curves of the Ferodo brake pad line, the Ferodo DSUNO is a mid-distance endurance compound with an average coefficient of friction of 0.48µ across the workable range of 392 to 1382 F. The cold friction profile of the Ferodo DSUNO is low, proper bedding and warm-up is recommended for optimum performance all the way to its maximum 1382 F limit. The Ferodo DSUNO is a popular choice in brake pads for many track drivers and endurance racers. Ferodo FRP3144ZB-N Fitment Front Axle: AP Racing CP5060 D54 AP Racing CP5555 D54 AP Racing CP9660 D54 AP Racing CP9661 D54 Ferodo FRP3144ZB-N Cross Reference: AP Racing: CP3894D54 Brembo: B51 Carbotech CT7790A Cobalt: AP19 Hawk: HB109 Pagid: U1903 PFC: 7790.XX.18 We believe the above information is correct, but have not checked every brand fitment. Please verify the above part numbers before purchase.

A2-171 Girodisc 2pc Rear Brake Rotors (Audi S3 - VW Golf R) Fitment (Rear): Audi S3 VW Golf R is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country.  We ship most Girodisc systems the same or next business day to ensure we meet your delivery deadline. The Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc front rotors are approx 22.0lbs vs. 27.4lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum.  The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc.  The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by grade 12 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.Once the Girodisc system is in place, simply replace the cast iron rotor when needed. Sold/priced per pair. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

D2-049 Girodisc Rear Replacement Rotor Rings (350mm) This high-performance product is built to meet the demands of competitive racing. Designed for durability, precision, and track-day performance. Engineered for Performance on the Track FITS: PORSCHE CAYMAN S / BOXSTER S (2005-2014+) WITH PCCB REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT. is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary. The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

D1-001 GiroDisc Replacement Rotors Fitment: Ferrari F430 REPLACEMENT ROTOR DISC ONLY, DOES NOT INCLUDE ALUMINUM HAT. Need new rings for the Girodisc two-piece rotors on your Ferrai F430 or 360 Modena?  We've got them.  Rings come complete with all-new hardware and full instructions for re-assembly.Sold/priced per pair.

D1-002 GiroDisc Replacement Rotors FITS: FERRARI 348/355 REPLACEMENT ROTOR DISC ONLY, DOES NOT INCLUDE ALUMINUM HAT. is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.   >The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

C3 Carbon Ferrari 488 GTB Carbon Fiber Firewall Panel FITS: 2016+ Ferrari F488 GTB Coupe only Stunning carbon fiber panel to add a bit of flair to your 488 GTB engine bay. This piece installs against the firewall under the glass backlight, replacing the stock flat-black plastic trim. C3 Carbon uses ultra-precise CNC-machined billet moulds to create this incredible pre-preg dry carbon fiber replacement with quality, fit, and finish equaling expensive factory Ferrari carbon pieces. C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original appearance and craftsmanship at a reasonable price. Installation is simple. This piece can be paired with C3 Carbon engine surrounds in the Engine Bay Carbon Kit for a stunning upgrade of your car's engine bay. FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

Bell RS7-K Karting Pro Helmet FIA8878-2024/K2025 The Bell RS7-K brings HP7-derived design, crisp aerodynamics, and kart-specific safety into a lightweight, track-proven package. With FIA 8878-2024 and Snell K2025 approvals, a clear DSAF visor system, and efficient cooling, it’s built for performance-focused karters who want reliable protection and all-day comfort. FIA 8878-2024 protection with HP7-inspired performance Features FIA 8878-2024 and Snell K2025 certified for competitive karting Lightweight composite shell based on Bell’s HP7 profile for stability and airflow Double Screen Anti-Fog (DSAF) visor with sealing gasket for clear vision Multi-channel ventilation across chin, crown, and rear exhausts for cooling Kart-specific, non-fireproof interior with removable cheek pads Compatible with RS7 accessories like top/chin vents, spoilers, and tear-offs Bell RS7-K Helmet Sizing Chart Bell RS7-K Karting Helmet FAQs: What certifications does the RS7-K carry?The RS7-K is approved to FIA 8878-2024 and Snell K2025 standards for kart racing. Is the interior fireproof?No. The RS7-K is the karting version and uses a non-fireproof liner focused on comfort and durability. How do I choose my size?Measure above the eyebrows and around the widest part of your head. Typical ranges: S (57–58 cm), M (58–59 cm), L (60–61 cm), XL (61–62 cm). If you’re between sizes, consider the tighter fit for racing. Can I use this for car racing?It’s designed for karting. For cars, check your rulebook; most car series require SA/FIA car-racing homologations. Does it accept tear-offs and spoilers?Yes. The RS7 family supports visor tear-offs and optional aero pieces like top/chin vents and spoilers. Ready for fast laps and long sessions, the Bell RS7-K blends proven safety, excellent visibility, and cooling you can feel—so you can focus on driving. Where can I buy authentic Bell kart racing helmets?Right here at Discovery Parts. As an authorized dealer, we carry the full range of Bell kart helmets with fast shipping, expert support, and availability at trackside events across the country. For racers who demand the best in safety and performance, Bell kart racing helmets are the ultimate choice. Explore our extensive collection to find the perfect helmet for your racing needs. Bell Kart Racing Helmets: Bell Racing Helmets are renowned for their exceptional quality and safety features. With a wide range of models to choose from, you can find the perfect Bell Kart Racing Helmet to suit your racing needs. Bell Kart Racing Helmet: Each Bell Racing Helmet is a product of meticulous craftsmanship and cutting-edge technology. When you wear a Bell Racing Helmet, you're choosing a helmet that prioritizes your safety and performance on the track. Bell Race Helmets: Bell Race Helmets come in various styles and designs to cater to different types of motorsports. Whether you're into karting, open-wheel racing, or stock car racing, Bell has race helmets tailored for your specific discipline. Bell Race Helmet: Your Bell Race Helmet is more than just protective gear; it's a crucial part of your racing gear. The aerodynamic design of a Bell Race Helmet helps reduce wind resistance, giving you a competitive edge. Bell Helmet: A Bell Helmet is a symbol of trust in motorsports. Professional racers and amateurs alike rely on the comfort, safety, and durability that Bell Helmets provide during intense racing conditions. Bell Helmets: Bell Helmets have a rich history of innovation and excellence. The extensive range of Bell Helmets ensures that there's a model suitable for every racer, whether you're a seasoned pro or just starting in the sport. Bell Carbon Fiber Helmet: Bell Fiber Helmets combine the lightweight properties of carbon fiber with advanced safety features. These helmets are a top choice for racers seeking the ultimate in protection without sacrificing comfort. Kart Racing Helmet: A Kart Racing helmet is a fundamental piece of safety gear for any racer. Bell's race car helmets are engineered to meet the rigorous demands of motorsports, ensuring you stay safe on the track. Racing Helmet: Your racing helmet is your shield against potential accidents. Bell Racing Helmets are designed to offer superior impact protection while maintaining optimal visibility and ventilation. Racing Helmets: Racing helmets are a racer's most vital piece of equipment. Bell Racing Helmets, with their reputation for quality and safety, are the go-to choice for many professionals and enthusiasts in the racing community. Bell Racing: Bell Racing is synonymous with excellence in the motorsports industry. Their commitment to research, development, and testing has solidified their position as a leader in racing helmet technology. Kart Racing Helmet: When it comes to Kart racing, your helmet is your first line of defense. Bell Kart Racing Helmets are engineered to withstand the rigors of high-speed racing, ensuring your head is protected. Kart Racing Helmets: Kart racing helmets from Bell are designed to provide optimal head protection while maintaining lightweight and aerodynamic qualities, allowing you to perform at your best.

Sabelt Challenge TS-2 Driver Race Suit The Sabelt® Challenge TS-2 race suit is lighter than it’s predecessor at only 360 grams per square meter! This race suit model features a classic racing look and our excellent high quality tailoring. A lower neck collar, pre-curved arms, full-floating sleeves for complete range of motion, and an anti-bubbling twill external layer with pockets are a few of the features you’ll enjoy in this Nomex® fiber woven fire-retardant suit. Hidden shoulder handles under the (also fire retardant) embroidered Sabelt® logo make hanging and storing easier than ever.  Available in sizes EU46–66 / US36-56.  Colors available are black/white, red, white, blue, and black/yellow. SABELT TS-2 CHALLENGE RACE SUIT TECHNICAL DETAILS FIA 8856-2018 Homologation Fabric Weight 360 g/m² Nomex® Fire-Retardant – Anti-Bubbling External Layer Lower Neck Collar Internal Elastic Waist Band, Outer Waist Belt External Pockets Sizes EU 46 – 66 (US 36-56) SABELT TS-2 CHALLENGE RACE SUIT SIZING

Pagid Racing Brake Pad Shape No. 4910 Fits The Following Vehicles: Make Model Build (Year) Front Rear Audi RS6 (C6) [ceramic brakes] 2008 - 10 X Bentley Continental GT [ceramic brakes] 2003 - 11 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake RSC 1 compound is for carbon-ceramic brake rotors only. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage.

Silver Rocket Dry Carbon Fiber Gurney Flap Applications: Porsche 718 (all models, street or race car) Pipe A/C Right Into Your Helmet On The Track The Silver Rocket Enduro Forced Air Adapter was originally designed for maximum driver cooling in the Silver Rocket Racing Porsche 718 GT4 Clubsport during endurance races. Silver Rocket then refined the design to serve as the ideal cooling solution for any 718 model on hot, intense track days. The adapter easily connects to your car's A/C vent, directing cool, dry air straight into your helmet and providing a refreshing breeze on every lap. Silver Rocket Enduro Forced Air Adapter Highlights Proven on-track through real endurance racing Crafted from 100% aerospace-grade dry carbon fiber Custom fit for all Porsche 718 models Dual outlet design: the adapter fits both the middle and side vents, allowing for two adapters - one for helmet cooling and one for seat cooling!

Sparco GRID QRT Sim Seat – The Ultimate Throne for Sim Racers! NON FIA or SFI Tired of slipping and sliding in your seat while chasing that apex? Meet the Sparco GRID QRT Sim Seat, your new secret weapon for perfecting those fast laps—without breaking a sweat. Designed to hug you tighter than your favorite pair of racing gloves, this seat offers the kind of lateral support that’ll have you feeling like you’re strapped into a real race car. (But don't worry—no G-forces here to mess up your hair.) Why’s it so special? Let’s talk about Sparco’s QRT Technology—straight from their high-tech lab in Italy. Think aerospace innovation... for your butt! Sparco's QRT process shaves 30% of the weight off the shell, giving you a seat that's so light, it practically floats (don’t worry, it won’t). The GRID QRT is built for sim racers who demand top-notch performance without the hassle of tweaking their setup every five minutes. Just jump in and go! Sparco GRID QRT Features That’ll Make You Feel Like a Pro Ultra-light fiberglass composite shell – Perfect for when you want to say, “Yeah, my seat’s lighter than your lunch.” Deep side and shoulder bolsters – Feels like a bear hug, but from a racing seat that actually wants you to win. Customizable padding with Velcro – Need more space for those epic gaming snacks? No problem, just move the padding around or take it out entirely! Harness slots to fit a wide range of drivers – Whether you’re a slim speedster or a bigger boss, the GRID QRT’s got your back. Fire retardant fabric – For when things heat up (in the game, of course). Benefits You’ll Brag About Lateral support that keeps you locked in – No more shifting around mid-race. This seat grips you tight for maximum focus. Removable side panels – If you need a little extra wiggle room, the side cushions pop off faster than your competition can hit the brakes. Ergonomics designed for hours of comfort – Perfect for marathon sessions when you’re going for the virtual podium. Sparco GRID QRT Seat Sizing Info Medium/Large – Fits up to a 36” waist (But remember, you don’t need to be FIA-approved to rock this bad boy at home.) The Future of Sim Racing Comfort: What is QRT? Sparco’s QRT (Quick Resin Technology) is like strapping into the future. Developed in Sparco’s OEM Composite Lab in Italy, it uses aerospace tech to make sure you get maximum strength with minimum weight. In fact, this process guarantees a 30% reduction in weight compared to traditional sim seats, which means less drag (not that you’re worried about aerodynamics in your living room, right?). Sparco GRID QRT(SIM)FAQ Is this seat FIA approved? Nope. But since you’re not taking this seat to the real track, do you really care? It’s made for sim racing, so buckle up and enjoy. Will this seat fit my rig? With its universal harness slots and customizable padding, the Sparco GRID QRT is a perfect fit for most sim racing setups. Just make sure you’ve got the right base and mounts to keep you steady as you fly through corners. Is the fabric durable? Absolutely! The fire retardant fabric not only looks great, but it’s also built to withstand those intense moments when you’re on the edge of victory. Ready to Upgrade Your Sim Racing Game? Don’t just sit there—dominate your virtual races with the Sparco GRID QRT Sim Seat. Light, comfortable, and engineered to make you feel like a racing champion, this seat will have you shaving seconds off your lap times in no time. Hit the 'Add to Cart' button now and experience the next level of sim racing!

Sparco PRO 2000 QRT Sim Racing Seat – Feel the Track Without Leaving Your Setup NON FIA or SFI Ready to take your sim racing game to the next level? The Sparco PRO 2000 QRT Sim Racing Seat isn’t just a seat—it’s a full-on racing experience. Whether you're chasing the podium or working on those perfect apexes, this seat delivers pro-level comfort and precision for serious sim racers. With QRT technology and superior lateral support, the only thing missing is the smell of burning rubber. Sparco PRO 2000 QRT Features & Benefits – Because Winning Takes More Than Just Skill QRT Ultralight Shell: This isn’t your average gaming chair. The QRT fiberglass composite shell is super lightweight and incredibly strong, offering the same kind of tech you'd find in real racing seats. At 30% lighter than traditional fiberglass, you’ll be gliding through virtual tracks with ease—and bragging rights. Non-Slip Fabric: In a heated sim race, the last thing you need is to feel like you're slipping and sliding around in your seat. The non-slip fabric in the shoulders and bottom cushion keeps you stable and focused—ready for that perfect line every lap. Adjustable Lumbar Support: Even champions need comfort. With removable and adjustable lumbar cushions, your back will stay in prime condition for those long endurance races. Ready for a 24-hour Le Mans sim? So is this seat. Versatile Mounting Options: Whether you’re using a full sim rig or a simpler setup, the bottom and side-mounting capabilities offer full flexibility. Bottom mounting (with the optional #50003 Spacer kit) or side mounting—customize your rig exactly how you like it. What Is QRT Technology? Sparco’s Quick Resin Technology (QRT) is a game-changer for sim racers. Born from aerospace tech, this process creates ultralight, strong fiberglass shells—bringing your sim racing seat closer to carbon fiber performance but without the steep price tag. It’s like having F1-level engineering in your home setup. More immersion, less weight, more wins. Sparco Pro 2000 QRT Specifications Shell Material: QRT Ultralight Fiberglass Composite Mounting Options: Side or bottom (bottom mounting requires #50003 Spacer kit) Fitment: Medium size, up to 34” waist Fabric: Fire-retardant, with non-slip fabric on shoulder and bottom cushions Lumbar Support: Removable and adjustable lumbar cushions Weight Reduction: 30% lighter than traditional fiberglass racing seats Compatibility: Ideal for sim racing setups Sparco PRO 2000 QRT Seat FAQs (Because We Know You Have Questions) Is this seat compatible with all sim racing rigs?Yes! Whether you're using a full rig or a simpler DIY setup, the Sparco PRO 2000 QRT can be mounted on most sim racing rigs with its side and bottom-mounting options. Can this seat support long endurance racing sessions?Absolutely. With its adjustable lumbar support and ergonomic design, this seat is built for both quick sprints and long marathon races, keeping you comfortable and supported through every lap. What waist size does this seat fit?The PRO 2000 QRT is perfect for medium-sized racers, comfortably fitting those with a waist up to 34 inches. It’s like sitting in the cockpit of a race car, even if you’re still in your living room. Ready to feel the rush of the track from the comfort of your home? The Sparco PRO 2000 QRT Sim Racing Seat offers the kind of immersive experience you’ve been dreaming of—combining lightweight design, ergonomic support, and professional-level performance. Don’t wait—hit “Add to Cart” and start racing in style today!

Sparco GP Seat: Bring Formula 1 Thrills to Your Living Room NON FIA or SFI Ever dream of tearing down the track in a Formula 1 car, feeling the g-forces tug at your body, and hearing the engine roar as you hit top speed? Well, while we can't all hop into a real F1 car (yet…), the Sparco GP Seat is the next best thing for turning your living room into the ultimate racetrack. Designed for the most demanding gamers and racing enthusiasts, this isn't just a seat—it’s a gateway to the thrill of racing. Why You'll Love the Sparco GP Seat From Sparco’s legendary experience in motorsport racing equipment, they've packed the highest levels of safety and comfort into a seat designed for those who crave the adrenaline of single-seater racing... but from the comfort of their own home. Whether you're a seasoned track-day warrior or just trying to shave seconds off your sim lap times, the Sparco GP Seat is for you. Authentic Driving Position-Ever wanted to feel like you're in the cockpit of a real F1 car? The Sparco GP Seat's fiberglass shell replicates the "lying down" driving position you’d find in Formula 1. You’ll almost expect Lewis Hamilton to pull up next to you. Comfort That Goes the Distance-Sim racing marathons are no joke. Luckily, the Sparco GP Seat comes with strategically placed paddings that improve lumbar, shoulder, and head comfort. You can go lap after lap without feeling like you've been run over by a truck. Sporty or Sleek—Available in black and red technical fabric for that racy, high-performance vibe, or in smooth sky leather for a more refined, luxurious look. Either way, it’s a seat you won’t mind spending hours in (even if you keep finishing in P2). Visualize This Picture this—you're racing through Eau Rouge at Spa, your heart pounding as you take the corner. The Sparco GP Seat's F1-inspired design makes you feel like you're there. Every twist of the wheel, every brake dive—it's like you’re flying around the track. The world fades away, and it's just you, the car, and the road ahead. And best of all? You're doing it all from your living room, snack break included. Sparco GP Seat Features & Specs Fiberglass shell for that authentic F1 feel Soft technical fabric or smooth sky leather upholstery options Padding for lumbar, shoulder, and head support Compatible with most popular sim rigs Not FIA homologated (but who cares? It’s in your living room!) Sparco GP Seat FAQs Is this seat adjustable?Absolutely! The Sparco GP Seat adjusts to accommodate various driving styles and comfort preferences. Whether you’re the type to sit up for a rally race or recline like an F1 pro, it’s got you covered. What sim rigs is it compatible with?The Sparco GP Seat is compatible with most major sim racing setups. So whether you're using Logitech, Thrustmaster, or Fanatec gear, you'll be ready to race in no time. Is this seat suitable for long gaming sessions?100%. This seat was made for endurance. With padding in all the right places and a design focused on comfort, you can go on all-night racing binges without feeling like you're sitting on concrete. Get Behind the Wheel—Literally! Stop dreaming about driving like a pro and make it a reality with the Sparco GP Seat. Whether you're chasing world records in a sim race or just looking to level up your gaming setup, this is the seat that will take you there. Get yours today and turn your home into the ultimate race experience. Because, let’s face it, who doesn’t want to feel like an F1 driver without leaving their house?

OMP FIRST ELLE Women's Race Suit FIA 8856-2018 HOMOLOGATED OMP's revised entry-level FIRST ELLE Racing suit for women is improved with all-new lightweight fabrics, while still maintaining its popular classic style. Its durable fire-retardant exterior is matched to a soft, knitted inner layer for improved comfort and durability. The high-quality Italian construction uses ultra-flat internal seams to prevent rubbing, and features an elastic knitted lower-back insert for improved comfort and mobility.  Two-tone design featuring an excellent quality/comfort/price ratio. External layer in aramidic fiber for high use and washing resistance, inner fabric in soft knitted material. Floating sleeves, antirubbing ultra flat seams. Elastic inserts on the back for better comfort and flexibility. Breathable inserts on the sleeves. SPECIAL SHAPE JUST FOR WOMEN. FIA 8856-2018 HOMOLOGATION Lighter weight than previous versions of OMP's FIRST ELLE, the new design includes full-floating arms for greater freedom of movement, and modern "fishbone" quilting to match the driver's ergonomics in a seated position. OMP FIRST ELLE RACE SUIT PROTECTION Certified to FIA 8856-2018 homologation standard Lightweight and breathable two-layer suit OMP FIRST ELLE KEY FEATURES Two-layer suit construction Soft-knitted inner material Floating arms with elastic bellows Ultra-flat anti rubbing seams Classic-fit design. Weight: 385 g/m2