Girodisc
A2-156 Girodisc 2pc REAR Brake Rotors (OEM PCCB)
$1,900.00
A2-156 Girodisc 2pc REAR Brake Rotors (OEM PCCB)
PORSCHE 991 TURBO & 981 CAYMAN GT4 OEM PCCB
This Girodisc system is a 390mm two-piece steel rotor and aluminum hat combination, a direct-replacement upgrade for the OEM PCCB brakes. The A2-156 will bolt directly to your Porsche and work perfectly with your OEM calipers. There are two main reasons for replacing your PCCB: first, the Girodisc rotors are designed to shed heat more effectively than the original rotors; second, the machined cast iron rotor rings are far more durable than the fragile OEM carbon-ceramic rotors. This is critical when you're swapping wheels on and off the car for track days or racing, because it's so easy to nick a carbon rotor and take a nice chunk out of it. When paired with the Girodisc A1-156 front rotors, your factory brake bias and ABS efficiency are maintained.
When used with Pagid or PFC performance brake pads, and RF1 brake fluid (also available from Discovery Parts), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes eight to ten high strength alloy steel drive pins manufactured by Girodisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The two-piece Girodisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A1-156 Girodisc 2pc 410mm Front Brake Rotors (replace OEM PCCB)
$1,900.00
A1-156 Girodisc 2pc 410mm Front Brake Rotors (replace OEM PCCB)
This Girodisc system is a 410mm two-piece steel rotor and aluminum hat combination, a direct-replacement upgrade for your car's OEM PCCB brakes1. The Girodisc A1-156 will bolt directly to your Porsche and work perfectly with your OEM calipers.
There are two main reasons for replacing your PCCB: first, Girodisc rotors are designed to shed heat more effectively than the original rotors; second, the machined cast iron rotor rings are far more durable than the fragile PCCB rotors. This is critical when you're swapping wheels on-and-off the car for track days or racing. It's so easy to nick a carbon rotor and take a chunk out of it, rendering it useless.
Pair these Girodisc rotors with Girodisc A2-156 rear rotors to maintain your factory brake bias and ABS efficiency. When used with Pagid or PFC performance brake pads, and CMS RF1 brake fluid, you have an excellent solution to easily cracked carbon-ceramic rotors.
The central hat section of the Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance.
Sold/priced per pair.
1 Note: you must use the same pad shape as that used on the Porsche 991/992 GT3/Turbo with factory iron rotors. The annulus (pad swept height) of these pads is smaller than that of the large PCCB pads.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
D2-035 Girodisc REAR Replacement Rotor Rings
$800.00
D2-035 Girodisc REAR Replacement Rotor Rings
REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT.
Need new rings for your Girodisc 2pc rotors? We've got them. Rings come complete with all new hardware and full instructions for re-assembly.Price is for a pair of rings and two hardware kits.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
D1-126 GiroDisc Replacement Rotors
$950.00
D1-126 GiroDisc Replacement Rotors
REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT.
is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
D1-156 GiroDisc Replacement Rotors
$1,050.00
D1-156 GiroDisc Replacement Rotors
REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT.
is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
D2-156 Girodisc Rear Replacement Rotor Rings
$1,030.00
D2-156 Girodisc Rear Replacement Rotor Rings
REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT.
is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
D2-154 Girodisc Rear Replacement Rotor Rings (OEM PCCB)
$1,130.00
D2-154 Girodisc Rear Replacement Rotor Rings (OEM PCCB)
One pair of Girodisc replacement 390mm rotor rings for the Girodisc A2-154 Fitment for Porsche 991 and 992 GT3/GT3RS plus 718 GT4RS two-piece floating rotor systems. Includes all necessary replacement hardware that must be used when replacing rotor rings.
Sold/priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
D1-154 GiroDisc Replacement Rotors (OEM PCCB)
$1,130.00
D1-154 GiroDisc Replacement Rotors (OEM PCCB)
One pair of Girodisc replacement 410mm rotor rings for the Girodisc A1-154 for Porsche 991 and 992 GT2RS/GT3/GT3RS and 718 GT4RS. two-piece floating rotor systems. Includes all necessary replacement hardware that must be used when replacing rotor rings.
Sold/priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A2-126 Girodisc 2pc Rear Brake Rotors
$1,300.00
A2-126 Girodisc 2pc Rear Brake Rotors
Fits Porsche 997 Cup Car
The GiroDisc system is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (also available from Discovery Parts), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A2-119 Girodisc 2pc Rear Brake Rotors
$1,900.00
A2-119 Girodisc 2pc Rear Brake Rotors
Fits Lamborghini Aventador
The GiroDisc system is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (also available from Discovery Parts), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
D2-119 Girodisc Rear Replacement Rotor Rings
$950.00
D2-119 Girodisc Rear Replacement Rotor Rings
REPLACEMENT ROTOR DISC ONLY, DOES NOT INCLUDE ALUMINUM HAT. is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A2-098 Girodisc 2pc Rear Brake Rotors
$1,300.00
A2-098 Girodisc 2pc Rear Brake Rotors
Fits Lamborghini Murcielago Early (4/4 Pot)
The GiroDisc system is an upgrade to a 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (also available from Discovery Parts), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A1-097 Girodisc 2pc Front Brake Rotors
$1,600.00
A1-097 Girodisc 2pc Front Brake Rotors
FITMENT: Lamborghini Murcielago (2005+) 380mmm Front Rotors
The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency.
Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response.
When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (available from ), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance.
Sold/priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A1-098 Girodisc 2pc Front Brake Rotors
$1,600.00
A1-098 Girodisc 2pc Front Brake Rotors
FITMENT: Lamborghini Murcièlago (2002-04) w/ 355mm Front Rotors
is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency.
Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response.
When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (available from ), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance.
Sold/priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A2-034 Girodisc 2pc Rear Brake Rotors (2004-2008)
$1,100.00
A2-034 Girodisc 2pc Rear Brake Rotors (2004-2008)
Fits Lamborghini Gallardo 2004-2008
The GiroDisc system is an upgrade to a 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (also available from Discovery Parts), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A2-050 Girodisc 2pc Rear Brake Rotors
$1,300.00
A2-050 Girodisc 2pc Rear Brake Rotors
Fits Lamborghini Huracan / Lamborghini Gallardo 2009-2012 / Audi R8
The GiroDisc system is an upgrade to a 395mm 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (also available from Discovery Parts), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
