Best selling products

Carbotech CT1395 Brake Pads Carbotech CT1395 brake pads are available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, and XP24 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT1395 Brake Pad Details: Manufacturer: Carbotech Manufacturer Part Number: CT1395 Hawk cross reference: HB631_.622 Material thickness of friction material and backing plate: 17mm Material thickness of friction material and backing plate: .622" Carbotech Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT1395 Brake Pad Front Axle Fitment: 2016 Chevrolet Corvette J57 23198733 2016 Chevrolet Corvette J57 2015 Chevrolet Corvette Z06 Ceramic 23198733 2015 Chevrolet Camaro LS 22990624 2015 Chevrolet Camaro 7.0 Liter 22990624 2014 Chevrolet Camaro Z/28 22990624 2013 Chevrolet Corvette ZR1 Package 2013 Chevrolet Corvette Z06 with Carbon Ceramic Brake Package option code Z07 2012 Chevrolet Corvette ZR1 Package 2012 Chevrolet Corvette Z06 with Carbon Ceramic Brake Package option code Z07 2011 Chevrolet Corvette ZR1 Package 2010 Chevrolet Corvette ZR1 Package 2009 Chevrolet Corvette ZR1 Package

Carbotech C7 2014-19 Corvette Z51 Front Brake Pad Carbotech CT1474 fits the 2016-19 C7 Corvette Z51, Camaro, Cadillac and others front axle is available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, and XP24 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT1474 Material thickness of pad material and backing plate: .582" (15mm) FMSI Number: D1474 Hawk interchange: HB787_.582 [img-12193-left-large_default] CARBOTECH BRAKE COMPOUNDS Carbotech 1521 The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotech AX6 The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP20 The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP24 XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech RP2 The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. The Carbotech 1474 is a popular pad used on many GM Models: 2017 CHEVROLET SS 2017 CHEVROLET Corvette J55 2017 CHEVROLET Camaro HD Brakes 2017 CADILLAC CTS 2017 CADILLAC CT6 Performance 2016 CHEVROLET SS 2016 CHEVROLET Corvette J55 2016 CHEVROLET Camaro HD Brakes 2016 CADILLAC CTS Vsport Performance 2016 CADILLAC CT6 Performance 2015 CHEVROLET SS 2015 CHEVROLET Corvette Heavy Duty 2015 CHEVROLET Camaro 2015 CADILLAC CTS Vsport Performance 2014 Tesla S 2014 CHEVROLET SS 2014 CHEVROLET Corvette Z51 2014 CHEVROLET Camaro 2014 CADILLAC CTS Vsport Performance 2014 CADILLAC CTS Vsport Performance 2013 Tesla S 2013 CHEVROLET Camaro 2013 Cadillac XTS 2012 Tesla S 2012 CHEVROLET Camaro 2011 CHEVROLET Camaro 2010 CHEVROLET Camaro [img-12193-left-large_default]

Carbotech Dynapro Caliper Brake Pads CTW4812 (Low Profile) Fitting many Wilwood Dynapro caliper fitments and nick-named the "Dynapro Low Profile", the Carbotech CTW4812 brake pad set is available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CTW4812 Most popular track combination: XP10 Front, XP8 Rear G-Loc cross reference: GP4812 Wilwood cross reference: 150-11363K, 150-14355K, 150-14356K Material thickness of pad of backing plate and pad material: .490" Material thickness of pad of backing plate and pad material: 12mm [img-13001-left-large_default] Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. [img-13001-left-large_default]

Spa AFFF Fire System - 2.25 Liter Alloy Mechanical This system is not SFI or FIA Certified. It will not pass ChampCar 2020 Tech. This Kit is an Ideal Entry-Level System Offering Two Zone Protection that is aimed primarily at the clubmans, fast road and track day participant. These systems contain 2.25 Liters of AFFF (Aqueous Film Forming Foam) and are subject to the same level of rigorous testing as our high end systems. All systems include nozzles, line, fittings, pull handles, and mounting hardware. So you get everything you need for a safe, clean installation. SPA AFFF Fire System 2.25 Liter Alloy Details: Manufacturer: SPA Technique Manufacturer's part number: HPC-225 Bottle dimensions: 17.3" H x 4.3" DIA SPA AFFF Fire System Kit Includes: (1) Bottle filled and pressurized with 2.25kg of 4Fire (2) Nozzles (1) T-fitting (2) Pull cables (one 6 feet, one 12 feet) (2) E-stickers (one large, one small) 10ft of 8mm Dekabon tubing

Sparco Prime Evo Racing Shoes The Sparco Prime EVO race shoe was designed for Formula one use and is currently being used by Formula One drivers. Formula One teams are always pushing for weight reductions and Sparco created some innovative solutions. The Prime EVO is one of the lightest race shoes available. It features a full Velcro closure system which gives a very secure and comfortable fit. The lightweight perforated Velcro closure covers a breathable stretch panel tongue which is extremely comfortable.  The Prime EVO features a Carbon Fiber sole. The special Carbon Fiber was developed by Sparco Engineers in the Sparco OEM Division. This carbon fiber is unique because it has been developed to be flexible, it is inlayed into the sole and runs from the toe box to the heel. Carbon Fiber is visible through the window of the ultra-thin oil-resistant and anti-static sole which offers greater pedal sensitivity. The cushioned inner sole has another unique feature, it has a printed silicon pattern which gives added traction and pedal feel. SPARCO PRIME EVO SHOE TECHNOLOGY FIA 8856-2018 approved Formula One Technology Ultra-light weight Full Velcro Closure System Carbon Fiber Sole Achilles stretch panel for mobility and comfort Pre-formed anatomic insole Next-gen sole in pure lightweight rubber for excellent pedal feel Anti-static, fuel and oil resistant sole

Sparco Superleggera Driver Race Suit The Sparco Superleggera is the lightest FIA 8856-2018 homologated race suit on the market today. Beyond the Superleggera being extraordinarily lightweight, it is also one of the most comfortable race suits available at any price. The Sparco Superleggera features a special four-way stretch panel that runs from each underarm down to the hip. These side stretch panels, combined with a rear stretch panel, give you the ultimate in mobility and freedom of movement, especially in the seated position. The Sparco Superleggera race suit also has a breathable inner thigh stretch panel, 360º floating arm gussets, and pre-curved arms and legs. It all adds up to unsurpassed comfort to go with the Superleggera's FIA and SFI approved safety. SPARCO SUPERLEGGERA DRIVER RACE SUIT DETAILS FIA 8856-2018 homologated SFI 3.2A/5 approved Lightest FIA suit on the market Pre-curved arms and legs Lightweight zipper and collar Inner-thigh mesh stretch panel Four-way mesh stretch panels on both sides and up the back SKU: 001142

Molecule Matte Helmet Detailer Molecule Matte Helmet Detailer cleans and details matte finish helmets in one easy step. Specially formulated to keep the low luster of matte helmets intact and maintain a uniform flat finish. Cleans and details matte finish helmets in one easy step Safely removes bugs, oils, dirt and grime Apply and allow to dry  

Racetech Steel Side Mounting Brackets Racetech RTB2009S satin black powder coated 3mm steel brackets for side mounting seats. Sold as a pair. Alongside the Racetech 4100-Series seats, they have developed a classy but affordable new bracket set. A staggered hole-and-slot pattern allows fine adjustments for the optimal seating position. Slots in the foot of each bracket also allow a little more lateral tolerance during installation. Use With These Racetech Seats: RT4009, RT4009W RT4009HR, RT4009WHR, RT4009WTHR RT4100, RT4100WT, RT4100HR, RT4100WTHR RT4119HRW, RT4119THR, RT4119WHR, RT4119WTHR RT9119HRW, RT9119THR, RT9119WHR, RT9119WTHR Hole Spacing (Seat): Nominal: 295mm Minimum: 290mm Maximum: 300mm

Molecule Race Fabric Protector 16 oz Specially engineered formula bonds technical fabrics, like Nomex, to help repel oils, grease and other liquid stains. Maintains breathability while keeping colors vibrant by shielding UV rays.

Bell Victory R.1 Helmet Bag The Bell Victory R.1 Helmet Bag isn’t just a storage solution—it’s your helmet’s safehouse. Designed for racers who care about their gear, this bag blends sleek design with tough protection to keep your lid in perfect shape between races, track days, or travel. Padded Protection For Your Most Important Gear From paddock to pit lane, your helmet deserves better than a flimsy duffel or back seat ride. The Bell Victory R.1 features rugged construction and soft, impact-absorbing interior lining that protects your helmet’s finish and shape. A large main compartment fits most racing helmets—even with spoilers and comm kits—while additional zippered side pockets give you room for accessories, balaclavas, HANS devices, and more. Features: • Padded interior with soft lining to protect your helmet from scratches and impact• Large main compartment fits most full-face helmets with air and radio kits installed• Dual side pockets for gloves, balaclavas, HANS, or accessories• Heavy-duty zippers and reinforced handles for durability• Sleek Bell Racing logo for a professional finish Bell Victory R.1 Helmet Bag FAQs: Will the Victory R.1 Bag fit my helmet with a HANS device attached? Yes, the bag has enough space for most helmets with HANS devices, though we recommend removing the device for best fit. Is this bag compatible with helmets that have forced air or communication kits? Absolutely. The Victory R.1 is designed to accommodate helmets with top air intakes and comm wires installed. Are the side pockets large enough for gloves or a balaclava? Yes, each side pocket is roomy enough to hold racing gloves, balaclavas, and even a small towel or accessories. Does the bag offer any water resistance? The exterior material is lightly water resistant for short-term protection, but it is not fully waterproof. Whether you're heading to a national race or just stashing your helmet in the trailer, the Bell Victory R.1 Helmet Bag gives you peace of mind and pro-level protection. Add it to your race day setup today.

Bell KC7 CMR Lewis Hamilton Edition Karting Helmet | FIA CMR-2016 F1 World Champion Lewis Hamilton Designs Special-Edition Bell Karting Helmet The Bell KC7 CMR Lewis Hamilton Edition Karting Helmet give kart racers the comfort they need to perform at their best. Built to handle the rigors of competition, they deliver control and style in every lap. Lewis Hamilton himself worked with Bell’s in-house custom paint team to create a custom graphic for the KC7 CMR with the signature elements and colors of his F1 design. This special edition KC7 CMR features a multi-layer SE07 2mm visor, clear top- and side-air intakes, clear rear spoiler, and HP helmet bag. The KC7 CMR is an ultra-lightweight youth karting helmet incorporating the same technology, aerospace materials, and construction methods used to build the advanced Bell HP7 helmet used by Lewis Hamilton in Formula 1 competition. Sleek, Aerodynamic, Ready For Championships The sleek, aerodynamic design of the Bell KC7 CMR incorporates an advanced ventilation system that can be used with or without air intakes to maximize driver cooling, along with a double-screen anti-fog (DSAF) visor to eliminate fogging. Homologated to the Snell/FIA CMR-2016 standard and certified for global competition, the Bell KC7 CMR karting helmet is designed to minimize weight for karting drivers under the age of 18. The Bell KC7 CMR Lewis Hamilton Edition Karting Helmet is the perfect helmet for the next generation of champions as they start their racing careers on the kart track! Bell KC7 CMR Lewis Hamilton Edition Karting Helmet Details Ultra-lightweight carbon/fiberglass shell Snell-FIA CMR-2016 approved Sizes: 54cm to 59cm Weight: 2.6 lbs. (54-56cm);  2.7 lbs. (57-59cm) Advanced multi-density, multi piece liner maximizes energy absorption and impact performance Graphic designs by Lewis Hamilton reflecting his Formula 1 helmet Based on the Bell HP7 auto racing helmet used in Formula 1 Powerful top and chin bar ventilation with 14 air intake and extraction channels Clear top- and side-air intakes, rear spoiler mounted on the helmet Optimized shield design improves aerodynamic behavior and energy absorption Multi-layer SE07 2mm visor Non-fireproof lining for extra durability Bell Kart Racing Helmet – Frequently Asked Questions (FAQ) Remember that safety is paramount in kart racing, and choosing the right helmet and maintaining it properly is essential for your protection on the track. Consult the professionals at any time you have specific questions about your racing helmet. What is the best helmet for kart racing?The Bell KC7 CMR is widely considered one of the best karting helmets, offering a carbon shell, Snell K2020 certification, and premium features for serious kart racers. Why do I need a racing helmet?Auto and kart racing helmets are essential for protecting your head in high-speed accidents. They also shield against debris and, in some motorsports, fire—making them a non-negotiable safety requirement. How do I choose the right size kart racing helmet?Use a flexible tape to measure the circumference of your head just above your eyebrows and ears. Compare the measurement to Bell’s sizing chart. For more help, read our blog on how to fit your helmet properly at . What safety standards should I look for in a kart racing helmet?Look for the Snell K2020 certification for adult karting or the Snell-FIA CMR-2016 certification for youth karting (15 and under). It ensures your helmet meets rigorous standards for impact protection. Unlike DOT (for street use), these standards are created specifically for karting. Can I use a motorcycle helmet for kart racing?No. Motorcycle helmets lack the kart-specific certifications and features like proper ventilation and impact resistance optimized for karting. Always use a helmet rated for motorsport competition. How often should I replace my kart racing helmet?Replace your helmet every five years depending on usage and the manufacturer's guidance. If it’s been dropped, involved in an impact, or shows signs of wear, replace it immediately. Are expensive racing helmets safer than budget ones?Yes, typically. While both must meet minimum safety standards, premium helmets offer lighter materials, better fit, improved aerodynamics, and enhanced comfort, all of which impact race performance and fatigue. How do I maintain and clean my kart racing helmet?Clean the exterior and interior using a helmet-specific care product like the Molecule Helmet Care Kit. Avoid submerging the helmet or using abrasive cleaners. Visors should be cleaned gently to avoid scratching. Do I need to wear a balaclava under my kart racing helmet?While not required for all karting events, a balaclava enhances comfort, keeps your helmet liner clean, and helps wick sweat. Fire-rated balaclavas are mandatory in sanctioned auto racing and recommended for high-performance karting. Is the Snell-FIA CMR-2016 rating important?Yes. The Snell-FIA-CMR-2016 certification is the most widely accepted youth kart helmet standard, required by many racing series to ensure safety and performance. Can I wear glasses with my kart racing helmet?Yes. Wide eye ports make it compatible with most prescription glasses and racing eyewear. A good fit ensures the glasses remain stable and fog-free. Can I use a used helmet for racing?It’s not recommended. Damage or degradation may not be visible, and older helmets might not meet current safety standards. Always buy new from an authorized dealer like . How can I prevent helmet fogging during races?Use a visor with built-in anti-fog technology like Bell’s DSAF system, or apply an anti-fog spray or insert. Keeping your helmet well-ventilated also helps. What's the importance of proper helmet ventilation?Good ventilation helps manage heat and moisture inside the helmet, reducing fatigue and keeping you focused throughout your race. How do I store my kart racing helmet between races?Store your helmet in a cool, dry place away from direct sunlight. Use a padded helmet bag like our Evo Helmet Bag to prevent damage during transport or storage. What is the difference between Snell K2020 and Snell-FIA CMR-2016 certifications?Snell K2020 is designed for adult karting helmets, focusing on impact protection. CMR-2016 is tailored for drivers under 15, offering a lighter helmet to reduce neck strain while maintaining safety standards. Are tear-off visors necessary for kart racing?Tear-off visors are beneficial in maintaining clear vision during races by allowing drivers to remove a dirty visor layer quickly. They are especially useful in outdoor karting where debris and dirt are common. How do I know if my helmet is still safe to use?Helmets should be inspected regularly for signs of wear or damage. If a helmet has been involved in a significant impact or shows signs of degradation, it should be replaced immediately. Additionally, helmets should be replaced every 5 years, even if no damage is visible. Can I customize my kart racing helmet?Yes, many manufacturers offer customization options for fit and aesthetics. However, any modifications should not compromise the helmet's structural integrity or safety certifications. Where can I buy a certified racing helmet?Buy from trusted experts like Competition Karting, online or in-person at any of our retail locations around the USA. We carry all major brands, including Arai, Bell, Stilo, and Schuberth, and support hundreds of racing events across the country. For racers who demand the best in safety and performance, Bell kart racing helmets are the ultimate choice. Explore our extensive collection to find the perfect helmet for your racing needs. Bell Kart Racing Helmets: Bell Racing Helmets are renowned for their exceptional quality and safety features. With a wide range of models to choose from, you can find the perfect Bell Kart Racing Helmet to suit your racing needs. Bell Kart Racing Helmet: Each Bell Racing Helmet is a product of meticulous craftsmanship and cutting-edge technology. When you wear a Bell Racing Helmet, you're choosing a helmet that prioritizes your safety and performance on the track. Bell Race Helmets: Bell Race Helmets come in various styles and designs to cater to different types of motorsports. Whether you're into karting, open-wheel racing, or stock car racing, Bell has race helmets tailored for your specific discipline. Bell Race Helmet: Your Bell Race Helmet is more than just protective gear; it's a crucial part of your racing gear. The aerodynamic design of a Bell Race Helmet helps reduce wind resistance, giving you a competitive edge. Bell Helmet: A Bell Helmet is a symbol of trust in motorsports. Professional racers and amateurs alike rely on the comfort, safety, and durability that Bell Helmets provide during intense racing conditions. Bell Helmets: Bell Helmets have a rich history of innovation and excellence. The extensive range of Bell Helmets ensures that there's a model suitable for every racer, whether you're a seasoned pro or just starting in the sport. Bell Carbon Fiber Helmet: Bell Fiber Helmets combine the lightweight properties of carbon fiber with advanced safety features. These helmets are a top choice for racers seeking the ultimate in protection without sacrificing comfort. Kart Racing Helmet: A Kart Racing helmet is a fundamental piece of safety gear for any racer. Bell's karting helmets are engineered to meet the rigorous demands of motorsports, ensuring you stay safe on the track. Racing Helmet: Your racing helmet is your shield against potential accidents. Bell Racing Helmets are designed to offer superior impact protection while maintaining optimal visibility and ventilation. Racing Helmets: Racing helmets are a racer's best friend. Bell Racing Helmets, with their reputation for quality and safety, are the go-to choice for many professionals and enthusiasts in the racing community. Bell Racing: Bell Racing is synonymous with excellence in the motorsports industry. Their commitment to research, development, and testing has solidified their position as a leader in racing helmet technology. Kart Racing Helmet: When it comes to Kart racing, your helmet is your first line of defense. Bell Kart Racing Helmets are engineered to withstand the rigors of high-speed kart racing, ensuring your head is protected. Kart Racing Helmets: Kart racing helmets from Bell are designed to provide optimal head protection while maintaining lightweight and aerodynamic qualities, allowing you to perform at your best.

Performance Friction PFC Brake Pads 0548.XX.16.44 PFC Brakes offers a wide range of sports car applications. Each PFC product is meticulously created to the highest performance and technology expectations. For PFC, we take pride in the accomplishments of the drivers and race teams that run our product. With More Championships than Any Other™, PFC are the best brakes on the market. Known around the globe in the Sports Car market, we know It’s Quicker. PFC is involved with numerous Sports Car events across the globe, including: IMSA Continental Tire Sports car Challenge  Porsche Cup Racing Pirelli World Challenge With over 35 years of friction knowledge, and on-track experience, our process enables us to provide you with the proper friction every time. NO COMPROMISES™ All PFC pad compounds have been thoroughly processed and are “Race Ready”. This means very easy burnishing to bed pads and discs.  The PFC 0548.11.16.44 and PFC 0548.08.18.44 have dominated the NASA Spec E46 class since inception. The PFC 0548 pad shape fits the rear axle of the E46 (non-M) chassis and comes in three popular compounds, the 08, 11 and brand new 332. PFC 332 Compound 332 has been formulated with lower bite and torque for rear applications. With smooth release, the 332 offers excellent stability and control. The 332 has been designed to work with ABS applications, and has exceptionally low wear rates. PFC 11 Compound A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation.   PFC 08 Compound One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. FITS:  BMW 7 Series 1994-01 E38 BMW 8 Series 1994- E31 BMW 330Cd / 330Ci 2003- E46 BMW 330d / 330Xd 2000-06 E46 BMW 330i 2000-06 E46 E46-330i BMW M3 2000-06 E46 E46-M3 BMW M3 CSL 2000-06 E46 CSL BMW M5 1998-03 E39 BMW X3 2004- E83 BMW X5 2000- E53 BMW Z4M 2006- E85 M Roadster & Coupé BMW Z8 2000-  

CMS Performance Bolt-In Roll Bar For Porsche 981 & 718 Cayman This Roll Bar Fits the Following Cars: 2014-2016 (981) Porsche Cayman Base, S, GTS, GT4 2017-2025 (718) Porsche Cayman Base, S, GTS, GT4 HANDS DOWN THE BEST ROLL BAR FOR YOUR CAYMAN Click Here for Installation Instructions The CMS Performance Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market for your Cayman. In designing our roll bar, safety and structural rigidity were our primary goals. That's why we use 1.75 x .095 Docol R8 Advanced High-Strength Steel tubing, much stronger than the smaller 4130 CrMo tubing others use. The harness cross-bar is designed to put your harness shoulder straps at the proper angle (0 to -20 ) and distance to the driver, regardless of your seat position. Yet the CMS roll bar requires no cutting through the carpeted hump in the middle of your interior (replacing this carpet is expensive if you ever want to return your car to stock). This also provides an ideal mount for a SmartyCam video camera. AMERICAN-MADE QUALITY, STRENGTH, AND ATTENTION TO DETAIL CMS Performance uses of Docol R8 tubing throughout, which lets them keep the driver's rear view unobstructed by the rear diagonal bracing typically used to support weaker roll bars. This also gives you unfettered access to the engine cover without removing any part of your roll bar. Other roll bars require partial removal to get at your engine -- not ideal in a car that sees track time. The CMS Performance roll bar's rear kickers bolt to the Cayman's rear shock towers, the safest, strongest possible mounting point. This adds rigidity to the chassis and suspension. The main roll hoop is mounted to the frame structure across the rear bulkhead for lighter weight and superior strength. CUSTOM POWDER COATING THE HALLMARK OF CMS PERFORMANCE CMS Performance will powder coat your roll bar in a color custom-matched to Porsche's OEM color palette1. Or you can go with a rich satin black powder coat for a stealthy look. Every CMS Performance roll bar is professionally powder-coated to order, in-house by CMS Performance. Fully TIG welded by master welders using superior materials, the design, strength, fit, and finish of the CMS Performance roll bar all add up to this: you can spend more on a roll bar, but you only get the best from CMS Performance. SAVE ON RACING HARNESSES WITH YOUR ROLL BAR Add six-point Schroth Enduro 2x2 GT4 , Schroth Flexi 2x2 GT4 , or Sabelt Silver Series GT4, or four-point Schroth Profi II ASM GT4 harnesses to your order using our convenient pull-down menus above! These harnesses are specifically designed to bolt right up to your Porsche carbon lightweight bucket seats. (Porsche's passenger-side seat does not have a factory sub-strap pass through.) If you're installing six-point harnesses in your Porsche, we strongly recommend adding the CMS Performance Sub Strap Mounts to your order. They provide a solid, properly located anchor for your anti-submarine straps, are easy to install. CMS PERFORMANCE PORSCHE CAYMAN 981/718 ROLL BAR DETAILS Manufacturer: CMS Performance Manufacturer part no.: CPRB-718981 Main hoop and kickers 1.75 x .095" Docol R8 Advanced High-Strength Steel Fully TIG welded One-piece main hoop Three-piece rear kickers make installation so much easier Easy engine access without removing any part of the roll bar No cutting of your central carpet Laser-cut mounting plates Designed, built, and finished by CMS in the US CNC machined high-strength-steel interlocking clamps to ease installation Easy to install and perfect fitment guaranteed Comes with detailed installation instructions and all necessary hardware CMS PERFORMANCE PORSCHE 981/718 ROLL BAR OPTIONS Pre-cut OEM Porsche interior trim for easier installation, preserving your original trim CMS Performance Sub Strap Mount This product is intended for off-road use only. 1 Note: CMS Performance powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car.

The Formula 2x2: Your Go-To Belt for Formula Type Cars The Formula 2x2 features Frontal Head Restraint (FHR) specific 2” shoulder belts, 2" non-adjustable Formula lap belts, and individual non-adjustable sub straps. Individual Sub Straps Make the Formula 2x2 Different The sub straps loop through the lap belts and latch into the shoulder belts. The classic “D” ring used in previous Formula belts has been replaced with sewn-in webbing, creating a more lightweight and comfortable fit. The sub straps are typically anchored very far rearward, almost to the lap belt mounting points. See Schroth Harness Installation documents for more details. This racing harness is typically used in single-seat open-wheeled cars with very reclined seating positions. It's not recommended for use in traditional road-racing sports cars or vehicles with more upright seating positions. Comes with wrapped snap-in attachments at all six points. Bolt-in attachments can be purchased separately. The Formula 2x2 is available in Black or Red. FEATURES: FHR/HANS specific 2” shoulder belts 2” Formula non-adjustable lap belts Individual non-adjustable sub straps Rotary cam lock FIA 8853-2016 approved