Best selling products

Sparco RW-11 Seamless Nomex Pants The Sparco RW-11 line of Nomex® undergarments is the lightest and most breathable on the market that is homologated to the new FIA 8856-2018 standard. When designing this new line of underlayers, Sparco studied the drivers seating position to ensure ultimate fit and comfort. The RW-11 features a fully seamless structure with ultra-soft stretchable material for a very comfortable fit.  RW-11 shirts and underpants are treated with Sparco’s X-Cool treatment, which draws heat from the body surface to cool the driver. In addition to cooling the driver, X-Cool treatment has an anti-bacterial effect.    The RW-11 pant is a seamless design with no seams for additional comfort. The pant is available in seven sizes: XS-3XL The RW-11 undershirt is a compression type fit, if you prefer a looser fit choose one size larger than you normally wear. Available in black or white. SPARCO RW-11 UNDERLAYER TECHNOLOGY Newest FIA rating - FIA 8856-2018 Seamless stretchable Nomex in key areas for mobility Designed for comfort in a driving position Minimal external seams increase driver comfort X Cool Silver draws heat from the body surface to cool the driver X Cool Silver has anti-bacterial effect

Recaro Pro Racer/Profi Steel Side Mounts (XL Size) This Mount Set Fits the Following Seats Recaro Pro Racer SPA XL Recaro Pro Racer SPG XL Recaro Profi SPA  XL Recaro Profi SPG  XL Recaro Pole Position FIA Approved Racing Seat Flexibility These Recaro Steel Sidemount brackets for the P 1300 GT advanced racing shell provide an FIA-approved mounting system for your Recaro Pro Racer or Profi SPA/SPG XL, or Pole Position racing seat. Strong, rigid, and made specifically for your Recaro XL racing seat, this simple side mount system is for drivers who demand the highest quality in their safety gear. Sold in pairs.The Recaro universal steel side mounts can be used with Recaro Pole Position, ABE, Profi XL, Pro Racer SPA XL (FIA Certified) side mounted bucket seats or most other brands as well. Check out the standard-size version here. Recaro Steel Side Mount Features: One pair of side mounts Steel construction FIA certified For use with the Recaro Profi SPA/SPG XL, Pro Racer SPA/SPG XL, or Pole Position

Sparco Trackside Tool Roll Introducing the Sparco Trackside Tool Roll: Your Pit Crew in a Bag Ever been at the track and needed a tool that's back in your garage? Frustrating, right? Well, fret no more! The Sparco Trackside Tool Roll is like having a pit crew in your pocket (okay, maybe not literally, but it's pretty close). 68 Pieces of "I Got This": This isn't just a tool roll; it's a treasure chest of 68 high-quality, professional-grade BoxoUSA tools. From sockets to screwdrivers, it's got everything to tackle most jobs at the track or in your garage. And the best part? They come with a LIFETIME WARRANTY. That's right, these tools are in it for the long haul, just like you. Compact Powerhouse: The beauty of this tool roll isn't just what's inside; it's the roll itself. Made from high-quality Cordura Nylon, it's like the Superman of tool bags – tough, durable, and ready for action. The compact size means it'll fit snugly in your track car or trailer, no more playing Tetris with your gear. Organized and Rattle-Free: With two pouches, one sewn and one Velcro removable, your tools stay organized and silent. No more rattling around like a box of marbles. The external straps and metal spring buckles keep everything secure, and the labeled pockets? Well, they're just the cherry on top. Product Specifications: Material: High-quality Cordura Nylon Tool Count: 68 professional-grade BoxoUSA tools Pouches: Two (one sewn, one Velcro removable) Security: Durable metal spring buckles Special Feature: Labeled internal pockets for easy tool identification FAQs: Can I add more tools to the roll? Absolutely! The roll is designed to expand, so feel free to add to your heart's content. Is it easy to carry? Yes! Its compact size and design make it a breeze to transport. How durable are the tools? Think Thor's hammer durable. Plus, they come with a lifetime warranty. Call to Action: Ready to Be the Hero of Your Track Day? Say goodbye to tool-time tantrums and hello to the Sparco Trackside Tool Roll. Click [Add to Cart] and bring the power of a fully-equipped garage to the track. Be the envy of every pit lane and never be caught unprepared again. Gear up now, and let's get those engines roaring! 

OMP ONE EVO FX Race Shoes The OMP ONE EVO FX Race Shoes are premium lightweight racing shoes designed for serious drivers who need comfort, control, and FIA-approved protection. Built for high-level motorsport use, the ONE EVO FX combines breathable fire-resistant materials, a Nomex inner lining, carbon fiber sole inserts, and a reinforced toe and heel for confidence in the cockpit. Designed for precise pedal feedback, the OMP ONE EVO FX gives drivers the sensitivity needed for braking, throttle modulation, and smooth shifting. The lightweight construction helps reduce fatigue during long sessions, while the secure lace and Velcro strap closure keeps the shoe firmly in place. OMP ONE EVO FX Racing Shoe Features FIA 8856-2018 approved for modern motorsport competition. Ultra-lightweight construction helps reduce driver fatigue. Breathable fire-resistant outer fabric improves comfort in the cockpit. Nomex inner lining provides added fire-resistant protection. Carbon fiber inserts improve sole rigidity and pedal feedback. New-generation sole design enhances sensitivity and control. Reinforced toe and heel improve protection and durability. Lightweight lace system with Velcro ankle strap for a secure fit. High-top racing shoe profile for support and coverage. Lightweight Racing Performance The OMP ONE EVO FX is engineered with an ultra-lightweight design to help drivers stay comfortable through long track sessions, race weekends, and endurance events. Less weight on the foot can improve comfort and reduce fatigue, especially during repeated braking, throttle, and clutch inputs. Fire-Resistant Construction Built with breathable fire-resistant fabric and a Nomex inner lining, the ONE EVO FX provides the safety construction required for FIA-approved motorsport footwear. The breathable material helps manage heat while maintaining the protection expected from a professional racing shoe. Carbon Fiber Sole Inserts Carbon fiber inserts in the sole help deliver consistent pedal feedback by improving rigidity and response. This gives the driver a more connected feel with the pedals, making it easier to sense braking pressure, throttle position, and pedal movement inside the cockpit. New-Generation Sole for Pedal Control The sole is designed to provide excellent sensitivity and grip for precise driver inputs. Whether you are managing trail braking, heel-toe downshifts, or throttle modulation, the ONE EVO FX is built to help translate small foot movements into confident control. Reinforced Toe and Heel The reinforced toe and heel areas improve durability while adding protection in high-wear zones. This construction helps the shoe hold up to repeated cockpit use, paddock wear, and the demands of competitive driving. Secure Lace and Velcro Closure A lightweight lace system provides a close fit across the foot, while the Velcro ankle strap adds extra support and security. This combination helps keep the shoe stable during aggressive pedal work without adding unnecessary bulk. OMP ONE EVO FX Race Shoe Specifications Approval: FIA 8856-2018 Outer Material: Fire-resistant fabric Inner Material: Nomex lining Sole: New-generation sole with carbon fiber inserts Closure: Lightweight laces with Velcro ankle strap Protection: Reinforced toe and heel Use: Auto racing, track days, club racing, GT racing, and professional motorsport OMP ONE EVO FX Sizing Chart  OMP ONE EVO FX Race Shoe FAQs Are the OMP ONE EVO FX Race Shoes FIA approved?Yes. The OMP ONE EVO FX Race Shoes are FIA 8856-2018 approved for motorsport competition use. What makes the OMP ONE EVO FX good for pedal control?The new-generation sole and carbon fiber inserts help provide better rigidity, sensitivity, and feedback through the pedals. Are the OMP ONE EVO FX shoes comfortable for long driving sessions?Yes. The lightweight construction, breathable fire-resistant fabric, and Nomex inner lining are designed to support comfort during long sessions and race weekends. Do these racing shoes have added protection?Yes. The ONE EVO FX features reinforced toe and heel areas for improved durability and added protection in high-wear zones. How do the OMP ONE EVO FX shoes close?They use lightweight laces with a Velcro ankle strap for a secure and supportive fit.

Schuberth SP1 Rear Spoiler The rear helmet spoiler is designed for drivers racing open cockpit vehicles. Attached using double sided adhesive tape, the rear spoiler increases stability by providing slight downforce.       

FITS: CHEVROLET CORVETTE WITH Z06 PACKAGE  REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT. Discovery Parts is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

Bell Racing Star Classic Vintage Helmet – Snell SA2020 / FIA 8859-2015 The Bell Racing Star Classic Vintage Helmet brings one of motorsport's most legendary helmet designs back to life, combining authentic 1970s Formula One styling with modern manufacturing techniques and established racing safety certification. Inspired by the iconic Bell Star full-face helmets worn by legendary Formula One drivers during the 1970s, the Star Classic recreates the unmistakable vintage profile that helped define an era of international motorsport. Part of the premium Bell Heritage Series, the Star Classic features a fiberglass composite shell, advanced energy-absorbing liner, protective synthetic rubber eyeport gasket, and a comfortable tan fire-resistant interior. Certified to Snell SA2020 and FIA 8859-2015, the Bell Star Classic combines nostalgic racing aesthetics with safety features developed for modern competition. Finished in exclusive Bell Heritage White with a high-gloss exterior, this helmet is an outstanding choice for vintage racing drivers, historic Formula car enthusiasts, classic sports car competitors, and collectors who appreciate authentic motorsport heritage. Bell Star Classic Vintage Helmet Key Features Iconic 1970s Bell Star Design: Faithfully recreates the classic full-face racing helmet silhouette associated with Formula One's golden era. Snell SA2020 Certified: Tested to the Snell SA2020 automotive racing helmet standard. FIA 8859-2015 Homologated: Approved under the FIA 8859-2015 motorsport helmet standard for applicable racing events. Fiberglass Composite Shell: Advanced composite shell construction designed for structural strength and impact protection. Advanced Impact Liner: Single-density, single-piece energy-absorbing liner developed for impact performance. Bell Heritage White Finish: Exclusive high-gloss white color inspired by classic racing helmets. Tan Fire-Resistant Interior: High-strength, high-comfort FR fabric provides a classic appearance and comfortable racing fit. Full-Face Construction: Traditional enclosed racing helmet design with distinctive vintage styling. Clear Star Classic Shield: Genuine Bell clear racing shield designed specifically for the helmet. Star Classic Shield Hardware: Dedicated shield and pivot mechanism. Optional Smoke Shield: Compatible smoked replacement shield available separately. Synthetic Rubber Eyeport Gasket: Helps reduce the entry of dirt, dust, and water around the visor. M6 FHR Mounting Terminals: Factory-installed mounting provisions for compatible HANS and frontal head restraint anchors. Four Helmet Sizes: Available in Small, Medium, Large, and Extra Large. Bell Heritage Series: Classic motorsport appearance with modern helmet construction. Inspired by the Original 1970s Bell Star Racing Helmet The Bell Star is one of the most recognizable helmet designs in motorsport history. During the 1970s, Bell's full-face racing helmets became synonymous with professional motorsport, appearing in Formula One, sports car racing, and other competitive racing disciplines. The Star Classic captures the distinctive proportions and clean silhouette of those original racing helmets, offering today's drivers the opportunity to experience authentic vintage motorsport styling. Its minimalist design, smooth shell profile, and classic eyeport create a period-correct appearance that complements historic Formula cars, vintage sports racers, and classic competition vehicles. Unlike an unrestored original racing helmet, the modern Bell Star Classic is manufactured using contemporary production techniques and certified protective components. For drivers who want to preserve the visual character of historic motorsport without relying on decades-old protective equipment, the Star Classic offers an attractive alternative. Snell SA2020 and FIA 8859-2015 Racing Certifications The Bell Star Classic carries dual motorsport certification to Snell SA2020 and FIA 8859-2015. These standards establish testing requirements for automotive racing helmets, including impact performance and other protective characteristics. The certification makes the Star Classic suitable for motorsport applications that continue to recognize these standards. Important: Helmet eligibility depends on the specific racing organization, event, and competition year. Some racing series require newer certification standards, so always verify your event's regulations before purchasing. Fiberglass Composite Shell Construction The Bell Star Classic uses fiberglass composite shell construction to combine the authentic appearance of the original Bell Star with modern protective materials. The shell is engineered for structural strength and impact performance while maintaining the classic proportions of the historic design. Bell manufactures the Star Classic using contemporary composite production processes, providing consistency in shell construction and protective performance. Its fiberglass shell works together with the internal energy-absorbing liner to meet the helmet's Snell SA2020 and FIA 8859-2015 certification requirements. Advanced Single-Piece Impact Liner Inside the Star Classic is an advanced single-density, single-piece impact liner designed to manage energy during an impact. The liner is integrated into the helmet's protective structure and works in combination with the fiberglass composite outer shell. This construction provides established motorsport protection while preserving the classic helmet design. Proper fit is essential to ensure that the shell and impact liner function as intended. Exclusive Bell Heritage White Gloss Finish One of the defining characteristics of the Bell Star Classic is its exclusive Bell Heritage White exterior. The high-gloss finish recreates the timeless appearance associated with classic racing helmets from the 1970s. Its clean white exterior provides an authentic period-inspired look that complements historic Formula cars, vintage race suits, and classic motorsport liveries. The Heritage White finish also makes the helmet an appealing choice for collectors and enthusiasts who appreciate Bell Racing's historic designs. Premium Tan Fire-Resistant Comfort Interior The Bell Star Classic features a tan interior manufactured from high-strength, high-comfort fire-resistant fabric. The tan lining reinforces the vintage appearance of the helmet while providing modern motorsport comfort. Bell designed the interior to provide a secure fit during competition while maintaining the distinctive character of the Heritage Series. Drivers should select their helmet size using Bell's official fitting guidance and confirm that the helmet remains stable without excessive pressure or movement. Clear Star Classic Racing Shield and Pivot System The Bell Star Classic uses a dedicated shield and pivot system developed specifically for its vintage shell design. A clear Star Classic racing shield provides visibility while maintaining the traditional appearance of the helmet. The visor system uses model-specific mounting hardware that complements the classic eyeport shape. Compatible replacement shields and pivot hardware are available separately for maintenance or replacement. Important: Use only genuine or manufacturer-approved shield components designed specifically for the Bell Star Classic. Optional Smoke Shield for Classic Motorsport Styling Bell offers an optional smoked replacement shield for the Star Classic. The smoke shield provides an alternative appearance and helps reduce brightness during suitable daytime driving conditions. Combined with the Heritage White exterior, the smoked visor creates a distinctive vintage motorsport look reminiscent of classic Formula racing helmets. The smoke shield is sold separately. Always select a shield tint appropriate for the lighting conditions and applicable racing regulations. Synthetic Rubber Gasket for Dirt and Water Resistance The Bell Star Classic incorporates a synthetic rubber gasket around the shield opening. This gasket helps reduce the entry of dirt, dust, and water into the helmet when the shield is properly closed. The sealing system also provides a more finished interface between the shield and helmet shell. Inspect the gasket regularly for wear, damage, or deterioration, and replace components when necessary. M6 HANS and Frontal Head Restraint Mounting Provisions Although the Star Classic features vintage styling, it includes factory-installed M6 threaded mounting terminals for compatible frontal head restraint anchors. These terminals allow installation of approved HANS/FHR anchor posts without modifying the protective helmet shell. This feature is particularly important for historic motorsport drivers participating in events requiring modern head and neck restraint systems. Important: The M6 mounting terminals are included, but the HANS/FHR anchor posts are optional accessories and are not listed as standard equipment. Always use compatible anchor hardware and follow the manufacturer's installation instructions. Perfect for Historic Racing and Vintage Motorsport The Bell Star Classic was developed for drivers and enthusiasts who appreciate the style of motorsport's golden era. Its vintage full-face design makes it particularly well suited for: Historic Formula racing Vintage sports car competition Classic touring car racing Historic racing festivals Vintage motorsport track events Classic race car demonstrations Motorsport heritage collections The combination of 1970s-inspired design and established racing helmet certification makes the Star Classic a natural choice for drivers seeking authenticity and functional protective equipment. Always verify the event's accepted helmet standards before using the helmet in competition. Bell Star Classic Vintage Helmet Technical Specifications Manufacturer: Bell Racing Helmets Model: Star Classic Series: Bell Heritage Series Helmet Type: Full-Face Racing Helmet Design Inspiration: Original 1970s Bell Star Snell Certification: SA2020 FIA Homologation: FIA 8859-2015 FIA Homologation Number: PH.106.21-C Shell Material: Fiberglass Composite Impact Liner: Single-Density, Single-Piece Energy-Absorbing Liner Exterior Color: Bell Heritage White Exterior Finish: Gloss Interior Color: Tan Interior Material: High-Strength, High-Comfort Fire-Resistant Fabric Shield System: Bell Star Classic Shield Configuration: Clear Star Classic Shield Pivot Kit: Dedicated Star Classic Hardware Optional Shield: Smoked Star Classic Shield Eyeport Gasket: Synthetic Rubber FHR Mounting: Factory-Installed M6 Threaded Terminals HANS/FHR Posts: Optional, Sold Separately Available Sizes: S, M, L, XL Primary Application: Historic Racing, Vintage Motorsport and Classic Circuit Competition Quantity: Sold Individually Bell Star Classic Vintage Helmet Sizing Chart Compatible Bell Star Classic Racing Helmet Accessories The Bell Star Classic supports genuine Bell Heritage Series replacement parts and selected racing helmet accessories. Bell Star Classic Clear Replacement Shield Bell Star Classic Smoke Replacement Shield Bell Star Classic Shield Pivot Kit Compatible HANS/FHR Anchor Posts Compatible Helmet Storage and Transportation Bags Always confirm that replacement shields, pivot components, and other accessories are designed for the Bell Star Classic rather than other Bell helmet models. Bell Star Classic Helmet Care and Maintenance Proper maintenance helps preserve the helmet's classic finish, protective components, and comfortable interior. Exterior Care: Clean the fiberglass composite shell using a soft microfiber cloth and helmet-safe cleaning products. Avoid solvents, abrasive cleaners, and harsh chemicals. Shield Care: Clean the visor using non-abrasive shield-safe products. Inspect the shield regularly for cracks, scratches, or other damage that could reduce visibility. Interior Care: Follow Bell Racing's recommendations when cleaning the tan fire-resistant comfort lining. Avoid excessive moisture and aggressive cleaning products. Gasket Inspection: Inspect the synthetic rubber shield gasket for deterioration or damage and replace when necessary. Hardware Inspection: Check shield pivot screws, chin strap hardware, and any installed FHR anchors before every racing event. Storage: Keep the helmet in a clean, cool, dry environment away from direct sunlight, excessive heat, and chemical exposure. Bell Star Classic Vintage Racing Helmet FAQs Is the Bell Star Classic Snell SA2020 certified? Yes. The Bell Star Classic carries Snell SA2020 certification for applicable automotive racing events. Is the Bell Star Classic FIA approved? Yes. The helmet is homologated to FIA 8859-2015 under homologation number PH.106.21-C. Is this the same helmet worn by Formula One drivers in the 1970s? The Star Classic recreates the appearance and shell shape of the original Bell Star design, but it is manufactured using later-generation protective materials and production techniques. What is the Bell Star Classic shell made from? The helmet features fiberglass composite shell construction. What color is the Bell Star Classic? It comes in Bell Heritage White with a high-gloss finish and tan fire-resistant comfort lining. Does the Bell Star Classic include a clear shield? The Star Classic is designed around its dedicated clear shield and pivot system. Verify the supplied shield configuration when ordering. Is a smoke shield available? Yes. Bell offers a compatible smoked Star Classic replacement shield separately. Does the Bell Star Classic include HANS posts? The helmet includes factory-installed M6 threaded mounting terminals. Compatible HANS/FHR anchor posts are optional and sold separately. Can the Bell Star Classic be used with a head and neck restraint system? Yes. It is designed for compatible approved frontal head restraint systems when the appropriate anchor hardware is installed. Does the helmet help keep out dirt and water? Yes. A synthetic rubber gasket around the shield opening helps reduce dirt, dust, and water intrusion when the visor is properly closed. What helmet sizes are available? The Star Classic is manufactured in Small, Medium, Large, and Extra Large. Can I use the Bell Star Classic for historic racing? Yes, provided the specific event accepts Snell SA2020 or FIA 8859-2015 certification. Check the event regulations before entering competition. What is the difference between the Bell Star Classic and Bell 500-TX Classic? The Star Classic is a full-face racing helmet inspired by Bell's 1970s Formula One designs, while the 500-TX Classic is an open-face helmet based on Bell's historic 500-TX design. Is the Bell Star Classic suitable for a vintage race car restoration or display? Yes. Its authentic styling, Bell Heritage White finish, and tan interior make it an attractive helmet for vintage racing collections and classic motorsport displays. Is the Bell Star Classic a current-generation SA2025 helmet? No. This version is certified to Snell SA2020 and FIA 8859-2015. Always verify that those standards are accepted for your intended motorsport use. Experience the Heritage of Bell Racing The Bell Racing Star Classic Vintage Helmet celebrates the unmistakable appearance of 1970s Formula One racing while delivering the construction and protective features of its certified modern-era design. With its fiberglass composite shell, exclusive Heritage White gloss finish, tan fire-resistant lining, classic shield configuration, and HANS/FHR mounting provisions, the Star Classic brings together racing history, comfort, and functional motorsport protection. For historic racing enthusiasts who want a genuine Bell helmet with the timeless appearance of motorsport's golden era, the Bell Star Classic is a compelling choice.

Sparco Competition R 325 Steering Wheel Deep Dish. Total Precision. The Sparco Competition R 325 Steering Wheel is built for drivers who demand maximum control and confidence behind the wheel. With a 350 mm diameter and an aggressive 95 mm deep dish, the R 325 provides superior leverage and hand positioning—ideal for drifting, rally, and other motorsport disciplines that require fast, precise inputs. Wrapped in a premium suede cover, the R 325 ensures a high-friction grip that keeps you connected to the car even in the most intense conditions. The yellow leather centering stripe offers an instant visual reference at speed, helping you maintain perfect steering alignment when it matters most. Features & Benefits 350 mm Diameter: Balanced size for confident, precise control. 95 mm Deep Dish: Added leverage and ergonomic hand position for aggressive driving. Premium Suede Grip: Glove-friendly traction for maximum steering feel. Yellow Centering Stripe: Quick visual cue for steering alignment under load. Race-Bred Construction: Designed by Sparco for track-proven performance and durability. Technical Specifications Diameter 350 mm Dish (Depth) 95 mm Cover Material Suede Centering Stripe Yellow leather Why Choose the Sparco R 325? With its deep-dish design, suede grip, and track-focused ergonomics, the Sparco R 325 delivers the precision, comfort, and control serious drivers expect from Sparco’s race-proven lineup—on track, stage, or street-performance builds.

Sparco Competition R 350 Steering Wheel 350mm Suede or Leather The Sparco Competition R 350 Steering Wheel is designed for drivers who demand superior control, comfort, and precision. Featuring an anatomic grip with varied diameters, this wheel ensures excellent feel and reduced fatigue during intense driving sessions. A signature yellow leather centering stripe helps maintain precise wheel alignment in high-performance conditions. Available in your choice of premium suede or leather, the R350 combines Italian craftsmanship with race-bred technology. Key Features Diameter: 350mm – ideal for competitive racing and performance driving Dish: 39mm depth, offering enhanced driver positioning Grip: Varied anatomic design with optimized thickness for comfort and control Cover Material: Choice of durable suede or premium leather Yellow leather centering stripe for quick wheel orientation Black cross stitching for added strength and longevity Why Choose the Sparco Competition R 350? Developed with decades of motorsport heritage, Sparco steering wheels are trusted by professional racers worldwide. The R350’s ergonomic grip, robust construction, and visual alignment stripe make it a top choice for drivers who want precise steering feedback on the track or during spirited performance driving. Whether paired with a suede finish for maximum race grip or leather for everyday comfort, the R350 delivers unmatched performance and style. Sparco steering wheels may require a vehicle-specific hub adapter, sold separately.

Sparco K-Track Kart Racing Rib Protector When every corner pushes your limits, your gear should never hold you back. The Sparco K-Track Rib Protector is engineered for serious kart racers who demand top-tier protection, agility, and FIA-certified compliance. Designed for both rising talent and experienced competitors, this FIA 8870 rib protector blends advanced materials and ergonomic fitment to shield your ribs without sacrificing mobility or focus on the track. The K-Track’s ultra-lightweight composite shell disperses impact forces while maintaining a slim, comfortable profile under any karting suit. Internal padding delivers precise pressure distribution and breathability, keeping you cool during long sessions. With sizes and fitments for youth and adult racers, the Sparco K-Track kart rib protector ensures an elite-level fit tailored for peak kart racing performance and safety. Sparco K-Track Kart Racing Rib Protector Highlights Certified to the latest FIA 8870-2018 kart rib protector homologation Lightweight, rigid shell with optimized impact absorption zones Ergonomic shaping for full freedom of movement while cornering Adjustable closures for a secure, tailored fit under karting suits Available in youth and adult sizes to suit all serious kart racers The Sparco K-Track is a hybrid rib protector vest designed to provide lightweight and flexible protection to drivers. It has been developed to exceed the standards set by the latest FIA 8870-2018 homologation, ensuring the highest levels of safety and protection. The K-Track features a sternum plate that adds an extra layer of protection to the driver's chest. The sides of the vest have multiple adjustments, allowing for a customized fit, and it has a soft stretch inner liner that conforms to the driver's shape in the seated position, offering enhanced comfort. Sparco K-Track Kart Racing Rib Size Chart   FAQ - Sparco K-Track Kart Racing Rib Protector  Q: Is the Sparco K-Track rib protector FIA certified? A: Yes, it meets the FIA 8870-2018 homologation, making it legal for use in national and international karting events. Q: Who should wear the K-Track rib protector? A: It’s designed for competitive kart racers—both youth and adults—looking for maximum rib protection without compromising comfort or performance. Q: What materials are used in the construction? A: The K-Track features a high-strength composite outer shell with energy-absorbing internal foam and breathable liner. Q: Can it be worn under all karting suits? A: Yes, the low-profile ergonomic design fits easily under modern CIK/FIA-compliant kart suits. Q: Is the K-Track suitable for youth drivers? A: Absolutely. The K-Track comes in youth-specific sizing, ensuring proper fit and protection for smaller drivers. Q: How do I choose the right size? A: Refer to the chest circumference and driver height sizing chart to select the proper youth or adult size. Q: How is the rib protector secured? A: The K-Track uses adjustable shoulder and waist straps for a stable, customized fit during aggressive karting maneuvers.

Red Line Superlight Shockproof Gear Oil The Super Low Friction Gear Oil for Lower Loading Used in low-power dog-ring racing transaxles seeing moderate to low loads (e.g., qualifying, etc.) Red Line Superlight Shockproof Gear Oil has a film thickness greater than an SAE 75W90 gear oil, yet exhibits low fluid friction like ATF. Acting like a liquid grease, this unique lubricant contains a suspension of solid microscopic particles functioning as an extreme pressure agent. This gives you the best of both worlds, balancing low drag and superior protection for gear teeth. Red Line Superlight Shockproof Gear Oil is popular in British F3, Euro F3, and Star Mazda racing gearboxes because of its ultra-low drag. Red Line Superlight Shockproof Gear Oil Details: Manufacturer: Red Line Manufacturer part no.: 58504 Unique lubricant with solid microscopic particles offers low drag/high protection 40% lower coefficient of friction and 250% greater load carrying capacity vs. conventional gear oils Relatively low viscosity, yet cushions gear teeth under extreme pressure Helps to prevent tooth breakage, resists throw-off Red Line Superlight Shockproof Gear Oil can be used with pumps and coolers when equipped with an inline screen rather than a fine filter. Avoid pumping down the center of a main shaft as the unique particles could centrifuge out of solution. Designed for wet sump transmissions and differentials with splash lubrication.

Schroth Reinforcement Plates M8 Schrtoth SG54 reinforcement plates, also called back-up plates by many chassis builders, are used when reinforcing a harness mount point when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor. Schroth Racing SG39 Reinforcement Plate Details: Manufacturer: Schroth Manufacturer part number: SG54 Length: 3.25" Width: 2" Welded Nut Size/Pitch: M8 Finish: Zinc Plated Material: Steel Quantity in kit: 1 Schroth M8 Reinforcement Back-Up Plates make for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a M8 nut welded to it. This is what comes with most Schroth harness sets to mount your harness eye bolt to. This back-up plate is what comes standard issue with most Schroth Racing Harness kits

Longacre Semi Pro Digital Tire Gauge 0-60 psi Longacre Semi Pro Digital Tire Gauge 0-60 psi keeps the highest value racecars at the front of the pack. Longacre Semi Pro Digital Tire Gauge 0-60 psi is a trackside favorite with many teams from ChampCar to IMSA. Longacre Semi Pro Digital Tire Gauge 0-60 psi Details: Manufacturer: Longacre Manufacturer part number: 53003 2 1/2" face with larger easy-to-read numbers Reads to .1 psi with .5% accuracy (1/2 of 1%) Air release button 17" hi-flex hose with swivel angle chuck - also includes ball chuck External gauge bumper Auto Off: Yes, to save battery PSI and Metric: Yes Batteries: 2 user replaceable AAA batteries included Tire Pressure Gauge Type: Digital Gauge Range: 0-60 psi Inflator: No Gauge Face Color: Red Gauge Size (in): 2 1/2 in. diameter Hose Length (in): 17.000 Lighted: Yes Bleed Valve: Yes Storage Case Included: No