Clearance

Alpinestars Tech-1 ZX v3 Nomex Gloves Alpinestars is always looking for new ways to improve driver safety and increase protection. The new generation of ZX auto gloves is the best yet and provides nearly a 20% improvement in heat transmission via the new top layer of honeycomb NOMEX materials. This has been achieved while still offering the exceptional combination of fit, feel and grip for which our gloves are known. Developed with leading drivers in F1 and Endurance, with a new dual-sided honeycomb two-layer fabric, the Tech-1 ZX v3 Gloves offer exceptional protection while significantly improving breathability. The new 3D silicon print palm provides excellent levels of grip from a reduced print surface, giving more feel. The glove’s pre-curve shape has been increased from the previous version, resulting in better fit and less material bunching when holding the wheel. ALPINESTARS TECH 1-ZX V3 GLOVE CONSTRUCTION AND FEATURES Advanced, breathable, and flame-resistant honeycomb, aramidic fiber main assembly with bonded aramidic lining to ensure for optimal temperature control and maximum comfort and feel. External seams provide superior comfort and prevent any excessive pressure points from forming on the hands while driving. Pre-curved fingers and palm help improve fit and reduce fatigue while driving. Outer grip zones for superb control and feel on the cockpit’s controls. Ergonomically designed 3D grip technology on palm and fingers with strategically positioned silicon surface patterning for improved flexibility and control. Touchscreen compatible thumb and second fingertip. Certified to FIA 8856-2018 homologation standard SKU 3550323-104 (Black/Anthracite) 3550323-123 (Black/White/Red) 3550323-13 (Red/Black) 3550323-156 (Black/Orange Fluo) 3550323-17-X (Black/Blue) 3550323-9151-X (Tar Gray/Black/Yellow Fluo)

Alpinestars Tech-1 Z v2 Racing Shoes   The redesigned Alpinestars Tech-1 Z v2 racing shoe features a new "sock" construction designed to deliver a more sock-like fit at the ankle. This premium lightweight shoe has a more contoured shape proportioned to better adapt to the shape and movement of your feet. The result is improved comfort in the cockpit and reduced driver fatigue. There is also an ergonomic foot bed to ensure your foot maintains a natural, comfortable posture, while also allowing maximum flexibility, support and foot movement. The Tech-1 Z v2 closure system features an upper aramidic speed lacing system integrating Alpinestars exclusively developed and proprietary wire closure system. This system strategically envelopes the foot for optimum support and structure without creating stress points. The wire system utilizes high-tensile fibers to ensure a precise and secure fit around the foot. Alpinestars one-piece toe and heel counter uses multi-compound construction, an integrated insole, and an ergonomic polypropylene heel counter for maximum support, stability, and protection ALPINESTARS TECH 1-Z v2 RACE SHOE CONSTRUCTION Main upper constructed from bovine leather for exceptional comfort and durability Elastic collar features silicon printing for durability Front and rear pull tabs for easy entry and a precise fit Perforated inner gusset padding for improved comfort and breathability Lightweight micro-porous padding around the heel and footbed for enhanced driver comfort All graphic detailing on the leather uses transfer technology for weight saving Lace Lock System ensures the shoe fits comfortably and securely Para-Aramidic tubular lining for excellent heat-resistance, weight saving, and strength ALPINESTARS TECH 1-Z v2 RACE SHOE PROTECTION Complies with SFI 3.3 homologation standards Elastic fireproof collar and gusset for comfort while enhancing the fit Alpinestars one-piece, multi-compound toe and heel counter Integrated fireproof PU heel for additional protection ALPINESTARS TECH 1-Z v2 RACE SHOE KEY FEATURES SFI/Alpinestars label between shoe and strap Exclusive F1-derived thin rubber compound sole for improved pedal sensitivity and optimum grip Extensive perforation zones on lateral and medial sides, heel, and toe for maximum ventilation and breathability

OMP One Evo X Nomex Race Gloves Closeout Savings on OMP One Evo X Nomex Gloves! The One Evo X Nomex Glove from OMP is a top-tier, extremely lightweight glove with pre-curved fingers for supreme comfort on your steering wheel. It's hard to describe just how amazingly lightweight and breathable these gloves are -- you have to feel them to believe it! The palm, ball and fingers have an ultra-grippy, raised triangular silicone pattern that's second to none when it comes to maintaining your grip under even the most intense conditions on track. Comfortable, Breathable, and High-Tech Safety The One Evo X Nomex Glove upper is made from extremely breathable and comfortable material, with an exclusive high-tech palm in silicon rubber proven to give you optimal grip, dexterity and sensitivity. As a top-tier glove, it features external seams to minimize pressure points on your fingers and palm, with an elastic wrist stop for excellent fitting comfort. The OMP One Evo X glove has quickly become a staff favorite at Competition Motorsport. It is a premium racing glove that truly delivers on all fronts! OMP Evo X Nomex Racing Glove Colors Black Black/Fluorescent Yellow Navy Blue/Cyan Red White OMP ONE EVO-X AUTO RACE GLOVE HOMOLOGATION FIA 8856-2018 OMP ONE EVO-X AUTO RACE GLOVE SIZE CHART

OMP ONE Evo X Racing Shoes The OMP One Evo X racing shoes has ample perforated leather for high breathability and printed fabric inserts around the soles to minimize weight. High resistant, injected sole for maximum grip. Velcro strap for a sure fit. This is a purpose-made racing shoe designed to increase the racer's sensitivity on the pedals to foster quicker reaction times. OMP ONE EVO X RACE SHOE FEATURES Homologation FIA 8856-2018 Made of breathable leather for superior comfort and incredibly fast break-in to conform precisely to your foot Nomex fire-retardant fabric Rear bellows provide flex where you need it for exceptional comfort Injected sole for maximum grip and resistance to wear Pivot-like heel design for smooth pedal actuation

Alpinestars Tech-1 ZX v2 Nomex Gloves APINESTARS PREMIER LINE OF NOMEX RACING GLOVES Alpinestars Tech-1 ZX v2 top-of-the-line racing glove features inside-stitched seams on the thumb and outside-stitched seams on the four fingers for optimum comfort, feel, and durability. The inside seams on the thumb offer excellent feel on the multiple pushbuttons of many racing steering wheels, while the external finger seams provide superior comfort by eliminating pressure points on your hands while driving. The Tech-1 ZX v2 glove uses Alpinestars' open-cuff design with a 180° elasticated wrist for easy entry/exit and a secure fit. Other premium design touches include an inner palm treated with latex to minimize micro slipping while holding the wheel, and a silicon surface for improved flexibility and control. There's also touch-sensitive print on the thumb and index fingertips for using touchscreen data acquisition electronics or mobile timing apps without having to remove your gloves. ALPINESTARS TECH-1 ZX V2 GLOVE CONSTRUCTION Flame resistant aramidic fiber main construction with a bonded aramidic lining to ensure optimal temperature control for maximum comfort and feel. External seams provide superior comfort and prevent any excessive pressure points forming on the hands while driving. Outer grip zones for superb control and feel of the cockpit’s control. Ergonomically designed grip technology on palm and fingers with strategically positioned silicon surface patterning for improved flexibility and control. Touchscreen compatible thumb and index fingertips. ALPINESTARS TECH-1 ZX V2 GLOVE PROTECTION Certified to the latest FIA 8856-2018 new homologation standard. Interior is sprayed with latex for improved slip resistance. Extended cuff length in accordance with new FIA standards for maximum protection against fire and heat. ALPINESTARS TECH-1 ZX V2 GLOVE KEY FEATURES Ergonomic chassis design and pre-curved fingers for an improved performance fit to reduce driver fatigue while offering a secure and snug fit around the wrist area. Alpinestars cuff opening design with a 180° elasticated wrist for easy entry/exit and a secure fit. External super-lightweight printed design details reduce material weight.

Alpinestars ZX EVO v2 Fireproof Shirt Alpinestars ZX Series EVO v2 layers are constructed with Lenzing FR®, an innovative natural viscose fiber that affords exceptional flame resistance and protection against heat transfer. This Formula 1 specification underwear is extremely lightweight and thin, while being incredibly soft to the touch for greatly enhanced comfort when wearing a driving suit.  Available in the usual black and white plus three other exciting colors including our favorite white and blue!   ALPINESTARS TECH 1-ZX NOMEX UNDERLAYER TOP PROTECTION Certified to the new FIA 8856-2018 homologation standard. ALPINESTARS TECH 1-ZX NOMEX UNDERLAYER TOP CONSTRUCTION Stretchable construction under new homologation standard requirements Lightweight, seamless tubular construction for optimum comfort ALPINESTARS TECH 1-ZX NOMEX UNDERLAYER TOP KEY FEATURES Fabric composition with a high percentage of Lenzing FR® fiber for enhanced garment performance Jaquard motif with Alpinestars knee logo for a unique design

Alpinestars ZX EVO v2 Pants Alpinestars ZX Series EVO v2 layers are constructed with Lenzing FR , an innovative natural viscose fiber that affords exceptional flame resistance and protection against heat transfer. This Formula 1 specification underwear is extremely lightweight and thin, while being incredibly soft to the touch for greatly enhanced comfort when wearing a driving suit. ALPINESTARS ZX EVO V2 UNDERLAYER PANT PROTECTION Certified to the new FIA 8856-2018 homologation standard. Constructed with Lenzing FR flame-resistant material. ALPINESTARS ZX EVO V2 UNDERLAYER PANT CONSTRUCTION Stretchable construction under new homologation standard requirements Lightweight, seamless tubular construction for optimum comfort.  ALPINESTARS ZX EVO V2 UNDERLAYER PANT KEY FEATURES Fabric composition with a high percentage of Lenzing FR fiber for enhanced garment performance. Jaquard motif with Alpinestars knee logo for a unique design.

Sparco Eagle LT Race Suit  The Eagle LT race suit is a limited-edition suit available only for the US market. The Eagle LT race suit features an all-new design in two colorways. This is a limited edition suit so only available while supplies last. SINGLE LAYER CONSTRUCTION, MULTI-LAYER PROTECTION The Eagle LT race suit is the result of over 3 years of research and development. Sparco has patented a new technology called HOCOTEX® which revolutionizes the way racing suits are made. This new exclusive Sparco technology creates a single layer fabric which has the protection of what is normally achieved by a multi-layer fabric. The Eagle LT race suit is FIA approved. SPARCO EAGLE LT RACE SUIT UNPRECEDENTED COMFORT Thanks to HOCOTEX®, the Eagle LT race suit is three times more breathable than a suit produced using traditional technology. The use of this relatively thinner fabric along with large side and back stretch panels and 360 degree arm gussets give the Eagle LT race suit ultimate flexibility and comfort. The Eagle LT race suit uses a new stretch material called Eagle fabric. This Eagle Fabric is lighter, more breathable and abrasion resistant than the traditional stretch material. SPARCO EAGLE LT RACE SUIT IMPROVED FIRE RESISTANCE Traditional racing suits have layers of fabric sewn together with a quilted pattern. The quilting provides air space between the layers which bloats in a fire, this provides thermal protection to the driver. HOCOTEX® creates a honeycomb structure with internal air cells that ensure the driver even more fire protection. Traditional box quilting creates an average of 300 air chambers in a size 52 suit. The Eagle LT has over 60,000 microcell air chambers which provide a 10 to 12% increase in heat protection performance. SPARCO EAGLE LT RACE SUIT TECHNOLOGY Single layer construction, multi-layer protection Three times more breathable than a standard suit Full 360o arm gussets Large stretch panels on the sides and back with new breathable fabric Three years of research and development HOCOTEX® patented Sparco technology, made in Italy FIA approved SPARCO EAGLE LT RACE SUIT SIZE CHART      

Sparco QRT-C Performance Carbon Fiber Racing Seat 2028 Expiry The Sparco QRT-C Performance Carbon seat represents the luxury evolution of the QRT-C race seat. The QRT-C Performance Carbon uses the same FIA approved light-weight all-carbon fiber race shell as the QRT-C race seat but is covered in Italian Leather and Alcantara. The QRT-C Performance Carbon is constructed from “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The seats are handstitched in the Sparco OEM factory in Torino Italy. The Sparco QRT-C Performance Carbon has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller cockpits. The QRT-C Performance can hold the driver during extreme lateral forces, but is also comfortable for long road trips. The QRT-C Performance Carbon seat is FIA Approved. Sparco QRT-C Performance Carbon Racing Seat Sizing Large – up to a 36” waist (pants size) WHAT IS  Sparco QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. Sparco QRT-C Performance Carbon Racing Seat Technology Ultralight Carbon Fiber Shell Excellent fitment into small cockpits Medium/Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved SPARCO QRT-C PERFORMANCE CARBON DIMENSIONS

Sparco EVO Performance Carbon Fiber Racing Seats 2028 Expiry   The Sparco Evo Performance Carbon Fiber Seat looks as good on the street and it does on the track.  Finished in soft and smooth leather with an alcantara center, this seat is at the Pinnacle of the Evo line.  As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover).  The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. SPARCO EVO RACE SEAT SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment:EVO CARBON – Medium (up to 34” waist)EVO L CARBON – Large (up to 36” waist)EVO XL CARBON – X-Large (38” waist) EVO QRT Racing Seat Technology Ultralight Pre-Preg Carbon Fiber shellExcellent fitment into small vehicle cockpits3 Sizes: Medium through XLExcellent ergonomicsLeather and Alcantara UpholsteryFIA 8859-1999 approved EVO Carbon Fiber Racing Seat Dimensions EVO Std Dimensions:   EVO L / XL Dimensions:

Sparco QRT-C Performance Carbon Fiber Racing Seat 2029 Expiry The Sparco QRT-C Performance Carbon seat represents the luxury evolution of the QRT-C race seat. The QRT-C Performance Carbon uses the same FIA approved light-weight all-carbon fiber race shell as the QRT-C race seat but is covered in Italian Leather and Alcantara. The QRT-C Performance Carbon is constructed from “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The seats are handstitched in the Sparco OEM factory in Torino Italy. The Sparco QRT-C Performance Carbon has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller cockpits. The QRT-C Performance can hold the driver during extreme lateral forces, but is also comfortable for long road trips. The QRT-C Performance Carbon seat is FIA Approved. Sparco QRT-C Performance Carbon Racing Seat Sizing Large – up to a 36” waist (pants size) WHAT IS  Sparco QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. Sparco QRT-C Performance Carbon Racing Seat Technology Ultralight Carbon Fiber Shell Excellent fitment into small cockpits Medium/Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved SPARCO QRT-C PERFORMANCE CARBON DIMENSIONS

Alpinestars Hypertech v2 Race Suit The Hypertech v2 is Alpinestars' top-of-the-line, super-lightweight and breathable two-layer Race suit. The Hypertech v2 race suit has an athletic fit, designed and developed for drivers wanting  professional-level racing suit performance. The Hypertech v2 race suit meets the much stricter requirements of the new FIA Standard 8856-2018 while still maintaining its incredibly light 265 g/m2 weight and premium material feel. The Hypertech v2 race suit outer shell is constructed from an aramidic Nomex anti-static material providing optimal heat- and flame-resistance despite the very light weight, while the new inner lining is an innovative aramidic knit that also meets the new FIA standard. The race suit incorporates thin, stretchable super-light panels developed exclusively for Alpinestars that maximize comfort and maneuverability, and also allow the suit to regulate body temperature. These F1-derived stretch panels are strategically placed at the elbow, lower back and sides, crotch and knees to give the driver excellent flexibility and freedom of movement in and out of the cockpit. ALPINESTARS HYPERTECH V2 RACE SUIT PROTECTION Certified to the latest FIA 8856-2018 homologation standard Includes laundry bag for convenience and to protect material fibers Nomex anti-static outer shell fabric offers exceptional heat and flame-resistant proprieties ALPINESTARS HYPERTECH V2 RACE SUIT TECHNOLOGY Super-lightweight and breathable two-layer suit incorporating thin stretchable panels for maximum comfort and effective regulation of body temperature Innovative soft lining material technology ensures breathability and comfort Strategically positioned Formula 1-derived stretch panels at lower back and sides, elbow, crotch and knees for enhanced flexibility in and out of the car Alpinestars fully-floating arm construction with stretchable knit fabric ensures minimal material resistance while driving Soft and thin wrist and ankle cuffs for maximum comfort and reduced weight Flat seam construction for reduced pressure points and improve strength Specially-designed soft collar incorporates details, knit fabric and secure hook-and-loop closures ALPINESTARS HYPERTECH V2 RACE SUIT DETAILS Alpinestars exclusive shoulder epaulette construction provides an effective feature for the extraction of the driver in the event of a crash Printed logos help maintain the suit material integrity and reduce overall weight Premium YKK thin lightweight zipper personalized with Alpinestars leather pull, plus double slider for a versatile and customizable fit Athletic fit design Ultra-light weight of 265g/m2

Sparco Circuit / Circuit II Carbon Fiber Racing Seat 2028 Expiry The Sparco Circuit Carbon is the carbon fiber version of the Circuit QRT which is a competition seat designed to provide additional head and neck protection. It is constructed with light weight “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The Circuit Carbon includes integrated bolsters to protect the head from lateral impacts. This seat can be used with an FHR (frontal head restraint) device for even greater protection. The ultra-light shell is features impact-absorbing material surround on the headrest. It has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The Circuit Carbon is FIA 8859-1999 approved. SPARCO CIRCUIT CARBON FIBER RACE SEAT TECHNOLOGY Ultralight Pre-Preg Carbon Fiber shellExcellent fitment (for a head restraint seat) into smaller cockpitsExcellent ergonomicsFire-retardant fabricSpecial non-slip fabricFIA 8859-1999 The Sparco Circuit Carbon Fiber is an ultra-light competition seat specifically designed for circuit use. Made from carbon fiber, the Sparco Circuit Carbon Fiber has an ultra-light shell. The Sparco Circuit Carbon Fiber includes integrated bolsters to protect the head. This seat can be used with a Hans device for even greater protection. The ultra-light shell is then wrapped in an impact-absorbing and fire retardant fabric that helps hold the body.  The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear. The Sparco Circuit Carbon Fiber is FIA approved and available in two sizes: Circuit (Standard) and Circuit II (Large). The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear.  SPARCO CIRCUIT CARBON FIBER RACE SEAT SIZING Small / Narrow – up to a 32” waist (pants size)  SPARCO CIRCUIT II CARBON FIBER RACE SEAT SIZING Medium – up to a 36” waist (pants size)  

Sparco EVO Carbon Fiber Racing Seats 2028 Expiry   As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover).  The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. SPARCO EVO RACE SEAT SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment:EVO CARBON – Medium (up to 34” waist)EVO L CARBON – Large (up to 36” waist)EVO XL CARBON – X-Large (38” waist) EVO QRT Racing Seat Technology Ultralight Pre-Preg Carbon Fiber shellExcellent fitment into small vehicle cockpits3 Sizes: Medium through XLExcellent ergonomicsFire retardant fabricSpecial non-slip fabricFIA 8859-1999 approved EVO Carbon Fiber Racing Seat Dimensions EVO Std Dimensions:   EVO L / XL Dimensions:

Sparco Legend Kevlar Racing Seat  2029 Expiry Introducing the Sparco Legend Kevlar race seat – a timeless masterpiece inspired by the exhilarating world of 1980s rally racing. With an unmatched blend of heritage and innovation, this seat captures the essence of that golden era, providing rally enthusiasts with an authentic and immersive experience like no other. The Sparco Legend Kevlar race seat pays homage to the rugged spirit of 1980s rally racing, where drivers pushed the limits of their skills and machines across treacherous terrains and unforgiving conditions. Designed with meticulous attention to detail, this seat combines classic aesthetics with modern technology, delivering a fusion of vintage charm and contemporary performance. Sit in the Sparco Legend Kevlar race seat and be transported back in time to an era of iconic rally legends. Crafted from carbon/kevlar and other premium materials, this seat features a retro-inspired design that reflects the era's distinctive style. From the vintage-inspired stitching to the classic embroidered logos, every element has been carefully crafted to evoke nostalgia and celebrate the glory days of rally racing. But the Sparco Legend Kevlar race seat isn't just about looks – it's built to endure the demanding challenges of rally racing. With its reinforced kevlar structure and robust construction, this seat is engineered to withstand the rigors of auto racing. The specially designed padding offers optimal support and comfort, ensuring you stay focused and energized during those long and intense rally stages. In rally racing, safety is paramount, and the Sparco Legend Kevlar race seat excels in this aspect. Built to meet the highest safety standards, this seat provides superior protection in the event of a crash or sudden impact. The integrated headrest and side bolsters offer enhanced support and stability, keeping you securely in place, even during the most demanding maneuvers on unpredictable terrain. As you navigate through gravel, dirt, and mud, the Sparco Legend Kevlar race seat enhances your connection with the car and the road. Its ergonomic design promotes proper posture, allowing you to feel the subtle feedback and nuances of the vehicle's movements. With each twist and turn, the seat's firm yet comfortable grip ensures you maintain optimal control, empowering you to unleash your driving skills to their full potential. Whether you're recreating historic rally moments or embarking on new off-road adventures, the Sparco Legend Kevlar race seat is the perfect companion for your journey. Its universal fitment and compatibility with a wide range of rally cars from the 1980s ensure seamless integration and ease of installation, allowing you to relish the authentic rally experience in your cherished classic or modern rally machine. Embrace the spirit of 1980s rally racing with the Sparco Legend Kevlar race seat – where timeless design meets modern performance. Ignite your passion for rally, feel the adrenaline surge through your veins, and embark on an unforgettable adventure that honors the legacy of those iconic rally warriors. Sparco invites you to relive the glory days of rally racing and create your own legend behind the wheel. Sparco Legend Kevlar Race Seat Sizing Medium / Large (up to 36” waist) Sparco  Kevlar Race Seat Technology Ultra lightweight dry carbon/Kevlar shell Bottom mount only Excellent ergonomics FIA 8859-1999 approved

Sparco Superleggera Race Suit (DISCONTINUED COLORWAYS) The Sparco Superleggera race suit is the lightest FIA 8856-2018 approved suit on the market. The Superleggera is not only lightweight, it's also one of the most comfortable race suits available at any price. It features a special four-way stretch panel that runs from each underarm down to the hip. These side stretch panels, combined with a generous rear stretch panel, give the driver the ultimate in flexibility and range-of-motion when in a seated position. The Sparco Superleggera fire resistant auto race suit also has a breathable inner-thigh stretch panel, 360º floating arm gussets, and pre-curved arms and legs. The Sparco Superleggera auto race suit is both FIA and SFI homologated. SPARCO SUPERLEGGERA RACE SUIT TECHNOLOGY FIA 8856-2018 homologated SFI 3.2A/5 approved Lightest FIA suit on the market Pre-curved arms and legs Lightweight zipper and collar Inner-thigh stretch panel Four-way stretch panels strategically placed throughout SKU 001142