COBB
COBB Accessport V3 for Porsche (991.1- 991.2) GT3-GT3RS
$2,450.00
COBB Accessport V3 for Porsche GT3/GT3RS
FITS:
Porsche 991.1 GT3 (2013-2016)
Porsche 991.1 GT3RS (2015-2017)
Porsche 991.2 GT3 (2017-2019)
Porsche 991.2 GT3RS (2018-2019)
The in-cabin mountable Accessport V3 has a large, full color, high resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from 1,000s of standard vehicle mounts). Of course, all of the great COBB tuning is included - with enough space for 100 calibrations. This is your new Accessport - and maybe the last one you'll ever need.
WARNING: Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure.
WHY CHOOSE COBB?
The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Porsche. Unlock power hidden within your ECU software by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need.
FEATURES
Larger, full color, higher resolution screen
Customizable multi-gauge display
In vehicle mount, with on/off switch
User-Customizable Start Up Screen
Interchangeable faceplates
50 STATE LEGAL
This part is legal for sale and use on Emissions Controlled Vehicles in all 50 states when used in accordance with the manufacturer's application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number: D-660-58
COBB
COBB Accessport V3 w-PDK Flash for Porsche (991.1- 991.2) GT3-GT3RS
$3,025.00
COBB Accessport w/PDK Flash for Porsche GT3/GT3RS
FITS:
Porsche 991.1 GT3 (2013-2016)
Porsche 991.1 GT3RS (2015-2017)
Porsche 991.2 GT3 (2017-2019)
Porsche 991.2 GT3RS (2018-2019)
The in-cabin mountable Accessport V3 has a large, full color, high resolution screen allowing you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from lots of standard vehicle mounts). Of course, the best part is the incredible COBB tuning included. The Accessport V3 has enough space for 100 calibrations. The new Accessport V3 is most likely the last one you'll ever need.
WARNING: Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure.
WHY CHOOSE COBB?
The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Porsche. Unlock power and performance hidden within the OEM engine and PDK mapping by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations from COBB for most bolt-on modifications. It's the last engine management solution you'll ever need.
The Porsche PDK dual-clutch transmission is one of the best OEM street car transmissions money can buy. But that doesn t mean it can t be a little bit better. The PDK upgrade for the Accessport V3 allows the owner to apply an improved calibration to the PDK as well as the ECU, resulting in an enhanced shift schedule during high throttle driving conditions while maintaining the tame but crisp behavior of the stock setup for normal driving.
FEATURES
Larger, full color, higher resolution screen
Customizable multi-gauge display
In vehicle mount, with on/off switch
User-customizable start-up screen
Interchangeable faceplates
50 STATE LEGAL
This part is legal for sale and use on Emissions Controlled Vehicles in all 50 states when used in accordance with the manufacturer's application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number: D-660-58.
COBB
COBB Accessport V3 for Porsche 996 Turbo
$1,025.00
COBB Tuning Accessport V3 For Porsche 996 Turbo
The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade solution for the Porsche 996 Turbo. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping. Plus, easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need!
Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime.
Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.
AVAILABLE OTS MAPS:
Stage1 maps are designed for a stock engine configuration, stock airbox, and stock exhaust.
Stage 2 maps are designed for a high-flow exhaust and cats, with an otherwise-stock engine, airbox, and filter.
Stage 3 maps designed for a high-flow exhaust, thicker core intercoolers, and upgraded intake such as the IPD Competition Plenum and Y-Pipe.
Each stage includes a 100-octane map for those times on the street or the track when you really (really) want to get down the road! (We use Race Gas in our race cars, it chemically reformulates pump gas to match 100-octane racing fuel!)
The in-cabin mountable Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from hundreds of standard vehicle mounts). Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations! This is your new Accessport - the last tuning device you'll ever need.
CONFIRMED APPLICATIONS:
2001-2005 Porsche 911 (996) GT2 MT2001-2005 Porsche 911 (996) Turbo AT, MT2002-2005 Porsche 911 (996) Turbo X50 AT, MT
ACCESSPORT V3 FEATURES:
Large, full color, higher resolution screen
Customizable multi-gauge display
In vehicle mount, with on/off switch
User-Customizable Start Up Screen
Interchangeable faceplates
COBB
COBB Accessport V3 for Porsche 911 991.2 Carrera-S-GTS
$1,825.00
COBB Tuning Accessport V3 For 991.2 Carrera/S/GTS
The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade solution for the Porsche 991.2 Turbo and Turbo S. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping. Plus, easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need!
Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime.
Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.
AVAILABLE OTS MAPS:
Stage1 maps are designed for a stock engine configuration, stock airbox, and stock exhaust.
Stage 2 maps are designed for a high-flow exhaust and cats, with an otherwise-stock engine, airbox, and filter.
Stage 3 maps designed for a high-flow exhaust, thicker core intercoolers, and upgraded intake such as the IPD Competition Plenum and Y-Pipe.
Each stage includes a 100-octane map for those times on the street or the track when you really (really) want to get down the road! (We use Race Gas in our race cars, it chemically reformulates pump gas to match 100-octane racing fuel!)
The in-cabin mountable Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from hundreds of standard vehicle mounts). Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations! This is your new Accessport - the last tuning device you'll ever need.
CONFIRMED APPLICATIONS:
2017-2019 Porsche 911 (991.2) Carrera 4 Cabriolet MT, PDK
2017-2019 Porsche 911 (991.2) Carrera 4 GTS Cabriolet MT, PDK
2017-2019 Porsche 911 (991.2) Carrera 4 GTS, PDK
2017-2019 Porsche 911 (991.2) Carrera 4 MT, PDK
2017-2019 Porsche 911 (991.2) Carrera 4S Cabriolet MT, PDK
2017-2019 Porsche 911 (991.2) Carrera 4S MT, PDK
2017-2019 Porsche 911 (991.2) Carrera Cabriolet MT, PDK
2017-2019 Porsche 911 (991.2) Carrera GTS Cabriolet MT, PDK
2017-2019 Porsche 911 (991.2) Carrera GTS MT, PDK
2017-2019 Porsche 911 (991.2) Carrera MT, PDK
2017-2019 Porsche 911 (991.2) Carrera S Cabriolet MT, PDK
2017-2019 Porsche 911 (991.2) Carrera S MT, PDK
2017-2019 Porsche 911 (991.2) Targa 4 GTS MT, PDK
2017-2019 Porsche 911 (991.2) Targa 4 MT, PDK
2017-2019 Porsche 911 (991.2) Targa 4S MT, PDK
ACCESSPORT V3 FEATURES:
Large, full color, higher resolution screen
Customizable multi-gauge display
In vehicle mount, with on/off switch
User-customizable start-up screen
Interchangeable faceplates
COBB
COBB Accessport V3 for Porsche 991.2 Turbo / Turbo S / GT2RS
$2,625.00
COBB Tuning Accessport V3 for Porsche 991.2 Turbo/Turbo S
The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade solution for the Porsche 991.2 Turbo and Turbo S. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping. Plus, easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need!
Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime.
Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.
Stage1 maps are designed for a stock engine configuration, stock airbox, and stock exhaust.
Stage 2 maps are designed for a high-flow exhaust and cats, with an otherwise-stock engine, airbox, and filter.
Stage 3 maps designed for a high-flow exhaust, thicker core intercoolers, and an upgraded intake such as the IPD Competition Plenum and Y-Pipe.
Each stage includes a 100-octane map for those times on the street or the track when you really (really) want to get down the road! (We use Race Gas in our race cars, it chemically reformulates pump gas to match 100-octane racing fuel!)
The in-cabin mountable Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from hundreds of standard vehicle mounts). Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations! This is your new Accessport - the last tuning device you'll ever need.
SUPPORTED VEHICLES:
2017-2019 Porsche 911 (991.2) Turbo PDK
2017-2019 Porsche 911 (991.2) Turbo S PDK
2018 Porsche 911 (991.2) GT2RS PDK
2018-2019 Porsche 911 (991.2) Turbo S Exclusive Series PDK
Accessport V3 Features:
Large, full color, higher resolution screen
Customizable multi-gauge display
In vehicle mount, with on/off switch
User-customizable start-up screen
Interchangeable faceplates
COBB
COBB Accessport V3 for Porsche 997.2 Turbo-Turbo S (2010-13)
$2,075.00
COBB Tuning Accessport V3 for 997.2 Turbo/Turbo S
The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade solution for the Porsche 997.2 Turbo and Turbo S. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping. Plus, easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need!
Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime.
Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.
Stage 1 maps are designed for a stock engine configuration, stock airbox, and stock exhaust.
Stage 2 maps are designed for a high-flow exhaust/cats and an upgraded intake like the IPD Intake Plenum and Y-Pipe.
Stage 3 maps designed for a high-flow exhaust, thicker core intercoolers, upgraded IPD intake, and COBB 3BAR MAP/PUT Sensors.
The Stage 3 map includes tuning for 100-octane racing fuel for when you absolutely, positively must go faster. We recommend using Race Gas to chemically reformulate pump gas to match 100-octane race fuel. (We use Race Gas at the track in our race cars.)
There's also a valet mode that limits RPM to 4,000, and an anti-theft mode that prevents the vehicle from starting.
The in-cabin mountable Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from hundreds of standard vehicle mounts). Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations! This is your new Accessport - the last tuning device you'll ever need.
SUPPORTED VEHICLES:
2010-2013 Porsche 911 (997.2) Turbo PDK
2010-2013 Porsche 911 (997.2) Turbo S PDK
FEATURES:
Large, full color, higher resolution screen
Customizable multi-gauge display
In vehicle mount, with on/off switch
User-customizable start-up screen
Interchangeable faceplates
COBB
COBB Accessport V3 for Porsche 997.1 Turbo-GT2 (2007-09)
$1,975.00
COBB Tuning Accessport V3 for Porsche 997.1 Turbo/GT2
The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade solution for all turbocharged Porsche 997.1 Turbo and GT2. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping. Plus, easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need!
Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime.
Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.
Stage 1 maps are designed for a stock engine configuration, stock airbox, and stock exhaust.
Stage 2 maps are designed for a high-flow exhaust and cats with an otherwise-stock engine, etc.
Stage 3 1000 maps designed for a high-flow exhaust, thicker core intercoolers, and COBB 1000-cc injectors.
Stage 3 1300 maps designed for a high-flow exhaust, thicker core intercoolers, and COBB 1300-cc injectors.
Each stage map enables brake boosting for two seconds. This allows you to floor the gas with your foot on the brake to build boost. The timer on the sport button has also been raised to 30 seconds so you can use the overboost feature longer.
There's also a valet mode that limits RPM to 4,000, and an anti-theft mode that prevents the vehicle from starting.
The in-cabin mountable Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from hundreds of standard vehicle mounts). Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations! This is your new Accessport - the last tuning device you'll ever need.
SUPPORTED VEHICLES:
2007-2009 Porsche 911 (997.1) Turbo AT, MT
2008-2009 Porsche 911 (997.1) GT2 MT
2011 Porsche 911 (997.1) GT2 RS MT
FEATURES:
Large, full color, higher resolution screen
Customizable multi-gauge display
In vehicle mount, with on/off switch
User-customizable start-up screen
Interchangeable faceplates
COBB
COBB Accessport V3 for Porsche 997.1 GT3-GT3RS (2007-08)
$1,025.00
COBB Tuning Accessport V3 for Porsche 997.1 GT3 & GT3RS
The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade solution for the Porsche 997.1 GT3 and GT3RS. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping. Plus, easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need!
Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime.
Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.
Stage1 maps are designed for a stock engine and intake, with either stock exhaust or muffler bypass.
Stage 2 maps are designed for full aftermarket exhaust (Cup car headers can be used), with an otherwise stock engine. Left-foot braking is enabled (a major reason to get the COBB Stage 2 tune). Rev limit is raised to 8,550 RPM.
There is also a valet-mode (rev limit of 4,000 RPM) and an anti-theft mode that will not allow the engine to start.
COBB has even provided a 100-octane map that takes maximum advantage of using high-octane racing fuel. We have had incredible success using Race Gas in our race cars to chemically reformulate pump gas into real 100-octane racing fuel.
The in-cabin mountable Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from hundreds of standard vehicle mounts). Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations! This is your new Accessport - the last tuning device you'll ever need.
SUPPORTED VEHICLES:
2007-2008 Porsche 911 (997.1) GT3 MT
2007-2008 Porsche 911 (997.1) GT3 RS MT
FEATURES:
Large, full color, higher resolution screen
Customizable multi-gauge display
In vehicle mount, with on/off switch
User-customizable start-up screen
Interchangeable faceplates
COBB
COBB Accessport V3 for Porsche 997.2 GT3-GT3RS (2010-12)
$1,125.00
COBB Tuning Accessport V3 for Porsche 997.2 GT3 & GT3RS
The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade solution for the Porsche 997.2 GT3 and GT3RS. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping. Plus, easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need!
Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime.
Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.
STAGE 1 MAPS
Stage1 maps are designed for a stock engine configuration. Left-foot braking is enabled (a major reason to get the COBB tune). The rev limiter is raised to 8,650 RPM in all Stage 1 calibrations. (ACN91 is for Arizona/California gas formulations.) There is also a valet-mode (rev limit of 4,000 RPM) and an anti-theft mode that will not allow the engine to start.
The in-cabin mountable Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from hundreds of standard vehicle mounts). Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations! This is your new Accessport - the last tuning device you'll ever need.
SUPPORTED VEHICLES:
2010-2011 Porsche 911 (997.2) GT3 MT
2010-2011 Porsche 911 (997.2) GT3 RS MT
2011 Porsche 911 (997.2) GT3 RS 4.0 MT
FEATURES:
Large, full color, higher resolution screen
Customizable multi-gauge display
In vehicle mount, with on/off switch
User-customizable start-up screen
Interchangeable faceplates
COBB
COBB Accessport V3 for Porsche 997.2 Carrera S-GTS (2009-12)
$1,425.00
COBB Tuning Accessport V3 for Porsche 997.2 Carrera S/4S/GTS/4 GTS
The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade solution for the Porsche 997.2. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping. Plus, easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need!
Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime.
OFF THE SHELF MAPS AND POWER GAINS
With the release of tuning support for the 997.2 Carrera S/GTS, owners are able to enjoy an increase in overall power and smoother power delivery. The following Off The Shelf Maps are available for supported vehicles:
Stage 0 v101
Stage 1 91 v101
Stage 1 93 v101
Stage 1 100 v101
The Stage 0 OTS map is simply the factory calibration data. The Stage 1 OTS maps are intended for vehicles in an otherwise stock mechanical configuration. An upgraded cat-back exhaust/mufflers will be fine and will not cause any issues.
Below are dyno graphs representing pulls using the included Stage 1 OTS maps for both 91 and 93 octane fuels. As you can see, both maps provide gains in power and torque across the board. The Stage 1 100 map will produce an additional 4-5 peak horsepower.
The in-cabin mountable Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from hundreds of standard vehicle mounts). Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations! This is your new Accessport - the last tuning device you'll ever need.
SUPPORTED VEHICLES:
2009-2012 Porsche Carrera S (997.2) MT WM
2009-2012 Porsche Carrera S (997.2) PDK WM
2009-2012 Porsche Carrera 4S (997.2) MT WM
2009-2012 Porsche Carrera 4S (997.2) PDK WM
2011-2012 Porsche Carrera GTS (997.2) MT WM
2011-2012 Porsche Carrera GTS (997.2) PDK WM
2011-2012 Porsche Carrera 4GTS (997.2) MT WM
2011-2012 Porsche Carrera 4GTS (997.2) PDK WM
COBB
COBB Accessport V3 w- TCM Tuning for Nissan GT-R
$1,375.00
COBB Accessport V3 w/TCM Tuning for Nissan GT-R
Simple ECU and TCM flashing with gauge package! The new in-cabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up race, street, or dyno gauge clusters), and mounting options (choose from 1,000s of standard vehicle mounts). And what's looks without brains? More processing power, memory, and storage to flash faster while saving all of your maps and logs. This is your new Accessport.
WHY CHOOSE COBB?
The Accessport is the world's best selling, most flexible, and easiest to use ECU and TCM upgrade solution for your GT-R. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Follow our staged upgrade path with pre-loaded Off The Shelf (OTS) maps or use custom mapping for any modification level. It's the last engine management solution you'll ever need.
FEATURES:
Large, full color, higher resolution screen
Customizable multi-gauge display
In vehicle mount, with on/off switch
Faster and easier to use with a familiar face
Interchangeable faceplates
DETAILS:
Simple Installation: Everything is included for the simple installation!
Intuitive on-screen instructions identify your exact vehicle and available maps.
Simple Uninstall: Revert your ECU to exactly as it was before with the
easy to use Uninstall option from the main menu.
Trouble Codes: Read engine trouble codes to diagnose issues. Clear them when resolved. Prevent expensive trips to the dealership.
Change Maps: Store up to 100 maps from our OTS map database or from your favorite COBB tuner and quickly switch between them for any need.
Gauges Use your Accessport as a gauge to monitor boost or any other live information, directly from the ECU.
Data Logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance. Stores up to 10 hours.
Performance Measuring: Welcome to your own performance evaluation suite! Measure 0-60 time, 60 foot and mile ET . and Trap Speed.
Shift Light: Set custom RPM warning lights for perfect shifts every time.
AP Manager: Use your PC or Mac to manage maps, download recorded data logs or quickly update your Accessport. Download free by clicking here.
NISSAN SPECIFIC FEATURES:
COBB Adjustable Traction Control: Adjust target traction slip on the fly (Slots 1-8) and maximize tire grip to best suit given track conditions (wet/damp/dry/street/slip/burnout/etc). Note: Feature must be enabled in ECU calibration for use.
COBB Adjustable Launch Control: Adjust the factory launch control RPM to maximize the tire to pavement contact for that perfect launch. Note: Feature is only available on AP3-NIS-006 and AP3-NIS-008.
COBB Boost Gauge wrap around: Monitor boost past 20 PSI (~150 kPa), which is an OEM limitation on the factory Multi-Function Display. The boost gauge will wrap around and display excess boost pressure.
COBB Boost Off The Line: Dial in boost to optimize launches beyond the factory Launch Control logic. Boost Off The Line builds boost to spool the turbos for that perfect launch. Note: Feature must be enabled in ECU calibration for use.
COBB Knock Indicator: View knock events, as they occur, on the factory Multi-Function display.
COBB On The Fly Map Switching: Switch to another map on-the-fly while you drive for optimal tuning for every situation.
COBB Real-time Tuning: Changes can be made to the map in real-time, while the engine is running. Greatly speeds up the tuning process and allows quick changes to powerful features like Adjustable Traction Control, Launch Control and Map Switching.
COBB Rolling Boost: Load up the turbos to create boost for roll race events. Simply hold the cruise control button, Set Coast to build boost. Note: Feature must be enabled in ECU calibration for use.
COBB Speed Density Tuning: Tune using the MAP sensor instead of the MAF sensor for big-power builds that exceed the stock MAF sensor's maximum capacity.
COBB Fast ECU Flashing: Allows ECU map change flashing time to be reduced to 40 seconds or less!
TCM Flashing: Re-flash the Transmission Control Module to enhance launch control, perform factory gear learning, and adjust clutch capacity and touch points. Note: Feature is only available on AP3-NIS-006 and AP3-NIS-008.
TCM Adjustments: Run clutch gear learning, or adjust clutch touch points, and clutch torque capacities. Note: Feature is only available on AP3-NIS-006 and AP3-NIS-008.
TCM Logging: Log transmission data monitors to diagnose mechanical issues or improve transmission characteristics. Transmission monitors can be logged simultaneously along with Engine monitors. Note: Feature is only available on AP3-NIS-006 and AP3-NIS-008.
TPMS Learning: Easily re-program TPMS sensors for new wheels and tires using the Accessport and prevent cumbersome trips to the dealership! (Requires common Tire Pressure Positioning Sensor Tool.)
Bank Air Learn: Re-learn and re-balance airflow between the left and right intake manifolds.
COBB
COBB Accessport V3 for Porsche 718 Cayman-Boxster (All)
$1,625.00
COBB Tuning Accessport V3 for Porsche 718 (All)
The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade solution for the Porsche 718 Boxster and Cayman. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping.
Plus, easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need!
Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime.
The Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from dozens of standard vehicle mounts). Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations. This is your new Accessport, the last tuning device you'll ever need.
Warning! Installation of the Accessport V3 over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact us at 888-748-7223 if you have any questions.
CONFIRMED APPLICATIONS:
Boxster
2017-2021 Porsche 718 Boxster MT, PDK
2017-2021 Porsche 718 Boxster S MT, PDK
2018-2019 Porsche 718 Boxster GTS MT, PDK
Cayman
2017-2021 Porsche 718 Boxster MT, PDK
2017-2021 Porsche 718 Boxster S MT, PDK
2018-2019 Porsche 718 Boxster GTS MT, PDK
FEATURES:
Large, full color, higher resolution screen
Customizable multi-gauge display
In vehicle mount, with on/off switch
User-customizable start-up screen
Interchangeable faceplates
COBB ACCESSPORT V3 DYNO GRAPHS:
COBB
COBB Accessport V3 for Porsche 991.1 Turbo-Turbo S
$2,425.00
COBB Tuning Accessport V3 for Porsche 991.1 Turbo/Turbo S
The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade solution for all turbocharged Porsche 991 Carrera models. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping.
Easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need!
Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime.
COBB OTS MAPS
Stage1 maps are designed for a stock engine configuration, stock airbox, and stock exhaust.
Stage 2 maps are designed for a high-flow exhaust and cats, with an otherwise-stock engine, airbox, and filter.
Stage 3 maps designed for a high-flow exhaust, thicker core intercoolers, and upgraded intake such as the IPD Competiton Plenum and Y-Pipe.
Each stage includes a 100-octane map for those times on the street or the track when you really (really) want to get down the road! (We use Race Gas in our race cars. It chemically reformulates pump gas to match 100-octane racing fuel!)
The Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from dozens of standard vehicle mounts). Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations! This is your new Accessport - the last tuning device you'll ever need.
Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.
CONFIRMED APPLICATIONS:
2014-2016 Porsche 911 (991) Turbo PDK
2014-2016 Porsche 911 (991) Turbo S PDK
COBB TUNING DYNO GRAPHS FOR ACCESSPORT V3:
COBB
COBB Accessport V3 for Porsche 987.2 Cayman S & Boxster S
$1,025.00
COBB Tuning Accessport V3 for 987.2 Cayman S/Boxster S
The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade solution for the Porsche 987.2. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping.
Easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need!
Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime.
Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact us at 888-748-7223 if you have questions.
Stage1 maps are designed for a stock engine configuration. Stage2 maps are designed for the addition of aftermarket high-flowing headers. Both Stage1 and Stage2 are designed to work well with the popular IPD Competition Plenum and throttle body upgrade. The Stage2, in particular, is a fantastic upgrade to stock!
The in-cabin mountable Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from hundreds of standard vehicle mounts). Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations! This is your new Accessport - the last tuning device you'll ever need.
SUPPORTED VEHICLES:
BOXSTER:
2009-2012 Porsche Boxster S (987.2) MT, PDK
2011-2012 Porsche Boxster Spyder (987.2) MT, PDK
CAYMAN:
2009-2012 Porsche Cayman S (987.2) MT, PDK
2011-2012 Porsche Cayman R (987.2) MT, PDK
FEATURES:
Large, full color, higher resolution screen
Customizable multi-gauge display
In vehicle mount, with on/off switch
User-customizable start-up screen
Interchangeable faceplates
COBB
COBB Accessport V3 for Porsche 991.1 Carrera (Naturally Aspirated) All
from $1,425.00
COBB Tuning Accessport V3 for Porsche 991.1 Carrera (All Naturally Aspirated)
Select the COBB+IPD+TB package above, save on max performance!
The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade for all naturally-aspirated Porsche 991.1 Carrera models. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by downloading COBB's more aggressive calibrations and mapping.
Plus, easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need.
Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime.
Stage1 maps are designed for a stock engine configuration, though their design flexibility allows them to work well with the IPD Competition Plenum and throttle body upgrade.
The Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and dozens of mounting options. Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations. This is your new Accessport - the last tuning device you'll ever need.
Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact us at 888-748-7223 if you have any questions.
CONFIRMED APPLICATIONS:
2012-2016 Porsche 911 (991) Carrera MT, PDK
2012-2016 Porsche 911 (991) Carrera S MT, PDK
2013-2016 Porsche 911 (991) Carrera 4 MT, PDK
2013-2016 Porsche 911 (991) Carrera 4S MT, PDK
2013-2016 Porsche 911 (991) Carrera S X51 MT, PDK
2015-2016 Porsche 911 (991) Carrera 4 GTS MT, PDK
2015-2016 Porsche 911 (991) Carrera GTS MT, PDK
COBB ACCESSPORT V3 DYNO GRAPHS
COBB
COBB Accessport V3 for Porsche 981 Cayman-Boxster (All)
from $1,425.00
COBB Tuning Accessport V3 for Porsche 981
Choose the COBB+IPD+TB package, save over 11% on max performance!
The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade for the Porsche 981. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping.
Plus, easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need!
Once you receive your Accessport V3, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime.
Stage 1 maps are designed for a stock engine configuration. Stage 2 maps are designed for the addition of the high-flowing IPD Competition Plenum and 82mm throttle body. (Choose the package above and save!) The Stage 2 tune, in particular, is an upgrade you can really feel.
The in-cabin mountable Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from dozens of standard vehicle mounts). The full range of unparalleled COBB tuning is included, with enough space for 100 calibrations. The new Accessport V3 is the last tuning device you'll ever need.
Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact us at 888-748-7223 if you have any questions.
SUPPORTED VEHICLES:
981 Cayman:
2014-2016 Porsche Cayman MT, PDK
2014-2016 Porsche Cayman S MT, PDK
2015-2016 Porsche Cayman GTS MT, PDK
2016 Porsche Cayman GT4 MT
2016 Porsche Cayman GT4 Clubsport PDK
981 Boxster:
2013-2016 Porsche Boxster MT, PDK
2013-2016 Porsche Boxster S MT, PDK
2015-2016 Porsche Boxster GTS MT, PDK
2016 Porsche Boxster Spyder MT
FEATURES:
Large, full color, higher resolution screen
Customizable multi-gauge display
In-vehicle mount, with on/off switch
User-customizable start-up screen
Interchangeable faceplates
COBB TUNING DYNO GRAPHS: