Coolshirt
Coolshirt Air Blower System
$253.00
Coolshirt Air Blower System
The Coolshirt Air Blower system is the most economical way to get fresh, filtered air to the driver for relief from that hot helmet. It's designed to attach to the driver's helmet intake and comes complete with a 235 CFM blower motor, a clear air hose, and a HEPA-4 air filter to ensure the driver's air is clean and virtually particle-free, down to 4 microns. Breathe fresh, clean air using a Coolshirt Air Blower system!
The system includes three feet of 3" diameter inlet hose (to the blower), four feet of 1-1/2" diameter outlet hose (from the blower to the helmet), a 12V 235 CFM blower, and a HEPA-4 air filter. Requires a ported helmet (sold separately).
The blower measures 5 3/4" long overall and draws 4.3 amps.
Chillout Systems
Chillout Systems Pro and V3 Mountable Wired Remote Control
$250.00
Chillout Systems Pro/V3 Mountable Wired Remote Control
Featuring a 10 ft. cord and color digital display, the dash-mountable Wired Remote Control is designed to turn your Chillout Quantum Pro/V3 on and off as well as adjust the temperature from anywhere in your vehicle. The compact design is 1.5 x 2.5 x 0.5 inches and weighs under 5 oz. This is a great addition if you are mounting your system in an out-of-reach area in your vehicle like the trunk or rear seat area.
* This remote works with the Quantum Pro (any mfg date) and Quantum V3 (mfg date 5/1/21 or later).
Chillout Systems
Chillout Systems 4" Carbon Fiber Air Duct Plenum
$250.00
Chillout Systems Carbon Fiber Air Duct Plenum
Forcing fresh air to your cooler is the most efficient way to increase cooling performance and reduce amp draw from your electrical system. This plenum fits perfectly to the intake side of your Quantum Cooler, allowing much cooler air to be forced through the system via any four-inch duct (cooler, ducting, and intake scoop not included). A minimum 150 CFM blower (sold separately) should be used in conjunction with the plenum in order to cool properly.
This carbon fiber plenum attaches via automotive-grade adhesive tape, creating a firm seal to keep the cooler pressurized with incoming cool air. This forces cool air all the way through the system and back out the exhaust side of the cooler, the most efficient way to reach maximum cooling capacity.
Coupling the Chillout Systems Air Duct Plenum with your Quantum Cooler ensures no cool air is wasted, maximizing the effectiveness of the system.
Chillout Systems
Chillout Systems 3" Carbon Fiber 90º Air Plenum
$240.00
Chillout Systems Carbon Fiber Air Duct Plenum
Forcing fresh air to your cooler is the most efficient way to increase cooling performance and reduce amp draw from your electrical system. This plenum fits perfectly to the intake side of your Quantum Cooler, allowing much cooler air to be forced through the system via any three-inch duct (cooler, ducting, and intake scoop not included). A minimum Uber3 blower (sold separately) should be used in conjunction with the plenum in order to cool properly.
This carbon fiber plenum attaches via automotive-grade adhesive tape, creating a firm seal to keep the cooler pressurized with incoming cool air. This forces cool air all the way through the system and back out the exhaust side of the cooler, the most efficient way to reach maximum cooling capacity.
Coupling the Chillout Systems Air Duct Plenum with your Quantum Cooler ensures no cool air is wasted, maximizing the effectiveness of the system.
Chillout Systems
ChillOut Systems 4" Carbon Fiber NACA Duct (Dual)
$195.00
ChillOut Systems 4" Carbon Fiber NACA Duct (Dual)
The ChillOut Systems 4" Dual NACA Duct is extremely lightweight and wind tunnel tested, providing over 55% more airflow than standard 3" NACA ducts.
ChillOut Systems 4" Carbon Fiber NACA Duct (Dual) Details:
Manufacturer: ChillOut Systems
Manufacturer Part Number:
Material: Carbon Fiber
Hose Outlet Diameter: 3"
Color: Black
Chillout Systems
Chillout Systems 3" Carbon Fiber NACA Duct
$140.00
Chillout Systems 3" Carbon Fiber NACA Duct
Chillout Systems 3" NACA duct is manufactured in lightweight carbon fiber with the intention of reduced parasitic drag while providing cooling air for Chillout Systems coolers, driver helmets, oil coolers and more.
Chillout Systems 3" Carbon FIber NACA Duct Details:
Manufacturer: Chillout Systems
Manufacturer part number: NP-3
Material: Carbon Fiber
Hose Outlet Diameter: 3"
Color: Carbon Fiber
NACA ducts bring air into a vehicle with a minimal increase in external drag. The purpose of a NACA duct is to increase the flow rate of air while not disturbing boundary layer airflow over your vehicle's exterior. When the cross-sectional flow area of the duct is increased, you decrease the static pressure and make the duct into a vacuum cleaner (without the drag effects of a standard scoop). The reason why the duct is narrow, then suddenly widens in a graceful arc is to increase the cross-sectional area slowly so that airflow doesn't separate and cause turbulence and drag.
Chillout Cooler sold separately.
Chillout Systems
Chillout Systems 4" Carbon Fiber NACA Duct
$140.00
Chillout Systems 4" Carbon Fiber NACA Duct
Ultralight weight and wind tunnel tested, the Chillout 4-inch NACA duct provides over 55% more airflow than a standard 3-inch NACA duct. Used in conjunction with 4-inch Neoprene Air Duct Hose and a 4-inch Chillout Carbon Fiber Plenum (both available in the drop downs above), the Chillout Carbon Fiber NACA Duct results in maximum cooling efficiency for your cooling system.
Chillout Systems 4" Carbon FIber NACA Duct Details:
Manufacturer: Chillout Systems
Manufacturer part number: NP-4
Material: Carbon Fiber
Hose Outlet Diameter: 4"
Color: Carbon Fiber
NACA ducts bring air into a vehicle with a minimal increase in external drag. The purpose of a NACA duct is to increase the flow rate of air while not disturbing boundary layer airflow over your vehicle's exterior. When the cross-sectional flow area of the duct is increased, you decrease the static pressure and make the duct into a vacuum cleaner (without the drag effects of a standard scoop). The reason why the duct is narrow, then suddenly widens in a graceful arc is to increase the cross-sectional area slowly so that airflow doesn t separate and cause turbulence and drag.
FEATURES:
Dry carbon fiber for light weight and durability.
Wind tunnel tested.
55% more airflow than 3" NACA duct.
Chillout Cooler sold separately.
Chillout Systems
ChillOut Systems Rapid Release Kit and Rapid Release Shirt Handle
from $75.00
ChillOut Systems Rapid Release Kit
The Rapid Release dry break system makes driver changes fast and effortless. No fumbling with tubes or connectors while under pressure, just a quick press and coolant/water starts flowing instantly. In an emergency, the connectors release when a force greater than 10 lbs is applied.The kit comes with two style car mounts, a roll bar mount and a flat surface mount which connects to the cooling system. Also included is a driver-side handle that quickly connects your shirt or balaclava to the car mount already fixed in the car.The car mounts can be fitted to the roll bar with the roll bar mount whereas the flat mount can be mounted in various places like the transmission tunnel, seat, etc via the flat-mount. FEATURES:
Effortless dry break system
Emergency release feature
INCLUDED:
2 x 1/4" barbed quick release fittings
1 x flat surface mount
1 x roll-bar mount
1 x driver side handle
2 x 36" reinforced, non-kinking extensions
2 x 1/4th to 5/16th barrel connectors
2 x 1/4th to 1/4th barrel connectors
ChillOut Systems Rapid Release Handle Kit for Cooling Shirt
The ChillOut Systems Rapid Release dry break system makes driver changes fast and effortless. No more fumbling with two tube connectors that always rotate into the hardest position to release.
ChillOut Systems Rapid Release Handle Kit for Cooling Shirt Details:
Manufacturer: ChillOut Systems
Manufacturer Part Number: RRHS
Material: Lightweight composite
Cooling hose side or shirt side: Shirt side
ChillOut Systems Rapid Release Handle Kit for Cooling Shirt Components:
2 x 1/4" barbed quick release fittings
1 x driver side handle
With the simplest of designs that works every time, a quick press and the Chillout coolant formula starts flowing instantly. To disconnect or in an emergency, the ChillOut Systems rapid release handle kit for cooling shirts automatically releases when a force greater than 10lb is applied.
Chillout Systems
Chillout Systems Insulated Coolant Hose
from $140.00
Chillout Systems Insulated Coolant Hose
The Chillout Hose is insulated liquid-transfer tubes encased in an ultra-durable, tear-resistant fabric shield.
Six to ten feet of hose that connects your cooling garment to the driver cooling unit with fittings for a consistent flow cycle.
Hose too long for your set-up? Solution: cut hose to desired length. Our hoses comes with an extra supply of matching shrink wrap for a flawless, durable, clean look.
FEATURES:
The 10-Foot hose includes additional heat shrink tubing for custom sizing while maintaining a finished look.
Male connectors, two pieces.
Female dual-prong connector to connect cooler, one piece
Can be connected to other hoses to extend length (including Y connector).
Double-Layer Insulation: one layer to protect the hose, a second to keep your coolant cool and efficient.
Chillout Systems
Chillout Systems Insulated Coolant Y-Hose
$179.00
Chillout Systems Insulated Coolant Y-Hose
The Chillout Systems Insulated Coolant Y-Hose is made of insulated liquid-transfer tubes encased in an ultra-durable, tear-resistant fabric shield.
The primary end of the hose is 6 ft. long branching off into dual 4 ft. hose ends that enable multiple cooling garments to be connected to one driver cooling unit with fittings.
Hose too long for your set-up? It's easy to cut the hose to desired length. Our hoses comes with extra supply of matching shrink wrap for a flawless, clean, durable finish.
FEATURES:
10-foot overall length, includes additional heat shrink tubing for custom sizing while maintaining a finished look
Male connectors, four pieces
Female dual-prong connector to connect cooler, one piece
Can be connected to other hoses to extend length including additional Y-connector
Double-insulation: one layer to protect the hoses and insulation, the other to keep your coolant cool and efficient
FluidLogic
FluidLogic Wave
from $169.95
FluidLogic Wave
The new WAVE of hydration is here!
The Fluidlogic WAVE is a complete hydration system that keeps your drink of choice cold and secure for your entire ride. Magnetic nozzle dock ensures quick one handed hydration with the flick of the wrist.
Features & Benefits
Kitchen grade stainless steel is roost and rust resistant.
Quick release bottle mount secures to any roll bar for convenient filling.
Available in 32oz and 64oz capacity for short and long rides
Keeps your drink cold for up to 8 hours
Keep your eyes on the road ahead with quick one-handed megentic operation
Stay hydrated outside your vehicle when parked at your favorite spot
Dust resistant silicone bite valve prevents dust and sand from sticking to the bite-valve
Insulated dairy-grade tubing keeps your drink cold in route to you
Wide mouth bottle opening makes it easy to add ice to keep your drink cold all day
Includes:
32oz or 64oz stainless steel bottle
Roll bar quick release mount & hardware
7.5ft of Dairy grade insulated draw tube
Magnetic draw hose dock
Dust & drip resistant silicone bite valve
Varying length straps for securing draw tube to roll bar
Coolshirt
CoolShirt Replacement Rechargeable Lithium-Ion Battery
$161.00
CoolShirt Replacement Rechargeable Lithium-Ion Battery
CoolShirt Lithium-Ion battery can run your CoolShirt battery powered cooler for up to 7 hours. Most racers keep a spare battery to keep one in the unit and one on the charger ready to go. When you have a CoolShirt portable system it is not uncommon to see drivers in their transporter "cooling down" between sessions or in a lawn chair in their pit stall. Reference 5004-0001
Chillout Systems
Chillout Systems Dual Voltage AC Power Supply
$160.00
ChillOut Systems Dual Voltage AC Power Supply
Enjoy your ChillOut Systems Quantum Cooler outside of the car! This ChillOut Systems AC power supply plugs into most standard 110-120V wall outlets to give you the same cooling comfort outside your car as you have on track.
ChillOut Systems Dual Voltage AC Power Supply Details:
Manufacturer: ChillOut Systems
Manufacturer Part Number: PS-1
Input: 120V
Output: ChillOut electrical connector
Your ChillOut engine is very portable, thanks to the built in handle. By adding the ChillOut Systems AC Power Supply you now can not put the small and powerful ChillOut engine next to you as you relax in the pits. Powered by a standard US 120V wall outlet on one cable and the ChillOut connector on the other end, track side cooling out of the vehicle has never been easier.
FluidLogic
FluidLogic Coaxial Helmet Side Kit
$149.95
FluidLogic Coaxial Helmet Side Kit
Everything needed to completely set up any forced air helmet to connect with the FluidLogic Coaxial System.
Includes:
Coaxial Helmet Side Maglock
Aquacom Pro (smaller mic size)
Aquacom Baja (larger mic size)
4mm tubing
FluidLogic
FluidLogic 360 Helmet Side Kit
$149.95
FluidLogic 360 Helmet Side Kit
Everything needed to completely set up any helmet to connect with the FluidLogic Flush 360 System
Includes:
Helmet Side Flush 360
Aquacom Pro (smaller mic size)
Aquacom Baja (larger mic size)
4mm tubing