FluidLogic
FluidLogic Containment Bottle
from $129.95
FluidLogic Containment Bottle
The new WAVE of hydration is here!
The Fluidlogic WAVE is a complete hydration system that keeps your drink of choice cold and secure for your entire ride. Magnetic nozzle dock ensures quick one handed hydration with the flick of the wrist.
Features & Benefits
Kitchen grade stainless steel is roost and rust resistant.
Quick release bottle mount secures to any roll bar for convenient filling.
Available in 32oz and 64oz capacity for short and long rides
Keeps your drink cold for up to 8 hours
Keep your eyes on the road ahead with quick one-handed megentic operation
Stay hydrated outside your vehicle when parked at your favorite spot
Dust resistant silicone bite valve prevents dust and sand from sticking to the bite-valve
Insulated dairy-grade tubing keeps your drink cold in route to you
Wide mouth bottle opening makes it easy to add ice to keep your drink cold all day
Includes:
32oz or 64oz stainless steel bottle
Roll bar quick release mount & hardware
7.5ft of Dairy grade insulated draw tube
Magnetic draw hose dock
Dust & drip resistant silicone bite valve
Varying length straps for securing draw tube to roll bar
Coolshirt
Coolshirt Cool-A-Clava
$115.00
Coolshirt Cool-A-Clava
The Coolshirt Cool-A-Clava literally helps you keep a cool head under pressure! This helmet insert is superior to any current air- or water-based head cooling unit on the market. The Coolshirt Cool-A-Clava plugs in to any current Coolshirt cooler or bag system. The Cool-A-Clava requires no special hardware and can be used with nearly every helmet available!
Last but not least, the Coolshirt Cool-A-Clava eliminates the need to install a separate helmet blower system. That's less drain on your electrical system, fewer hoses, less weight and lower chance of an equipment failure. This is, without a doubt, a must-have to stay cool and focused while on track.
Chillout Systems
Chillout Systems No Drip 1/4" Shirt Adapters
$105.00
Chillout Systems No Drip 1/4" Shirt Adapters
No Drip Adapters from Chillout Systems are designed to never leak and maximize the reliability of your driver cooling unit without the annoying "drip" when you disconnect.
Chillout Systems No Drip 1/4" Shirt Adapter Details:
Manufacturer: ChillOut Systems
Manufacturer Part Number: CO-DLC-1
Works with other ¼" cooling shirts: Yes
Quantity: 4 Pieces (2 complete sets)
We have found in very long endurance races such as the 2021 World Racing league 24 Hours of Sebring, multiple driver changes have parasitic loss of fluid during the repetitious connecting of the drivers shirts. No Drip adapters also prevent unintentional release as the Shirt Adapters lock together, linking the hose to your system securely.
Coolshirt
CoolShirt Replacement Cooler Pump
$104.00
CoolShirt Replacement Cooler Pump
This is a genuine CoolShirt replacement pump used in modern CoolShirt hard coolers. If you have a CoolShirt 13qt or 19qt hard sided cooler, with or without the air option, this is the CoolShirt replacement pump you need.
CoolShirt Replacement Cooler Pump Details:
Manufacturer: CoolShirt
Manufacturer part number: CHI-5012-0003
Manufacturer alternate part number: CHI-CTP
CoolShirt calls it Black Motorsports Pump
Fits CoolShirt Hard Coolers: Yes
Fits CoolShirt bag and soft coolers: No
Power requirement: 2 amps
Add an optional FC-1 Temperature Control for complete control over your cooling comfort in the race car.
Coolshirt
Coolshirt Water Hose
from $95.00
Coolshirt Water Supply Hose
The Coolshirt water supply hose connects your Coolshirt cooling garment to your cooler system. Choose from 4-, 8-, and 12-foot lengths. All Coolshirt water supply hoses come with emergency safety pull fittings that will release with as little as 21 pounds of force.
Coolshirt
Coolshirt Cooler Mounting Tray
from $91.00
The Coolshirt Cooler Mounting Tray secures hard-shell units like the Club or Pro System coolers to your vehicle. Comes with a strap, choose 13- or 19-quart depending on your cooler size.
Bell
Bell 10 Hole Top Air
from $79.95
Bell 10 Hole Top Air
The 10 Hole Top Air is designed to utilize the top and forehead ventilation channels on the HP7, HP5, RS7C LTWT, RS7 Carbon, RS7 Pro, GT5 Carbon, and GT5 helmets to allow these models to be adapted for use as a top forced air helmet. The 10 Hole Top Air design directs airflow around the top of the helmet for comfort and onto the shield to reduce fogging.
The kits are attached using aggressive double-sided adhesive and available in Clear, White, Matte Black, and Carbon. Nozzle configurations include V05, V05 45/90 Degree, or Quick Lock V10. Bell's 10 Hole Top Air is fully compatible with the Maglock system using the standard V05 nozzle.
Coolshirt
CoolShirt Replacement Fan/235 CFM
$77.00
CoolShirt Replacement Fan/235 CFM Air Blower System
This is the factory replacement fan for CoolShirt's ABS-C 235 CFM Air Blower System to keep delivering clean, fresh air to the racer's helmet from the racecar's outside intake. The 235cfm blower is perfect for "hot blooded" drivers or for enduro drivers needing a cooler core temp when the cockpit temperature rises. Keep it running with this replacement fan.
CoolShirt Replacement Fan/235 CFM Air Blower System Details:
Manufacturer: CoolShirt
Manufacturer part number: 5013-0002
CFM: 235
Voltage: 10-16.8 V
Wiring: Yellow+ (Positive), Black - (Ground/Common)
Chillout Systems
Chillout Systems Wiring Harness
$75.00
Chillout Systems Wiring Harness
This 10 AWG wiring harness features a 10-foot shock-resistant rubber power cord wrapped in a protective textile fabric. Overall length is 14 feet.
Chillout Systems
Chillout Systems 4" 285 CFM Blower
$65.00
Chillout Systems 4-Inch 285 CFM Blower
Chillout 4-inch 285 CFM blower offers high air output at a low 4.7 amp draw. Lightweight composite ABS housing makes the Chillout 4" blower the most powerful and reliable in its class.
FEATURES:
285 cubic feet per minute (CFM)
4.7 Amps
12 Volts
Lightweight, durable, and ultra-reliable
Coolshirt
CoolShirt 120V Battery Wall Charger
$62.00
CoolShirt 120V Battery Wall Charger - All CoolShirt Systems
This CoolShirt replacement battery charger is a direct replacement for the CoolShirt battery charger that is included with all battery powered CoolShirt coolers. Easy to connect to your CoolShirt battery, use this 120v wall charger to keep your CoolShirt Battery fully charged.
Manufacturer: CoolShirt
Manufacturer part numbers: CHI-5004-0002
Wall end: Standard 120V wall outlet
Cooler end: CoolShirt battery pack male end
Coolshirt
CoolShirt Replacement Fan/135 CFM
$62.00
CoolShirt Replacement Fan/135 CFM Air Blower System
This is the factory replacement fan for CoolShirt's ABS-C 135 CFM Air Blower System to keep delivering clean, fresh air to the racer's helmet from the racecar's outside intake. The 235cfm blower is perfect for "hot blooded" drivers or for enduro drivers needing a cooler core temp when the cockpit temperature rises. Keep it running with this replacement fan.
CoolShirt Replacement Fan/135 CFM Air Blower System Details:
Manufacturer: CoolShirt
Manufacturer part number: 5013-0001
CFM: 235
Voltage: 10-16.8 V
Wiring: Yellow+ (Positive), Black - (Ground/Common)
FluidLogic
MagLock Air Helmet Side Only Kit
$59.95
Maglock Air Kit
**Maglock Air hose NOT included**
Maglock Air - Helmet Side Only KitWhat's included:Maglock® Air Helmet sideMaglock® Air Dust CapMaglock® Visor StickerTool Kit
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo ST5 Hydration Kit
$49.95
$64.95
Stilo ST5 Helmet Hydration Kit
Hydration bite-valve kit designed specifically for the Stilo ST4 and ST5 helmet.
KIT INCLUDES:
(1) Male hydration connector
(1) Female hydration connector
(1) Hydration tube
(1) Bite valve
Coolshirt
CoolShirt Lightweight Air Hose 1.5" ID x 8'
$49.00
CoolShirt Lightweight Air Hose 1.5" ID x 8'
CoolShirt Helmet Air Hose 1 ½” ID x 8’ is used to connect your helmet cooler to your helmet. Measuring 8 feet long with an inside diameter of 1.5", this easily connects your helmet blower or cooler output to your helmet.
This CoolShirt Helmet Air Hose is a longer version of what is included in our CoolShirt Helmet Blower Systems with 135cfm and CoolShirt Helmet Blower Systems with 235cfm. If extra length of air hose is needed this is the CoolShirt Helmet Air Hose you need.
CoolShirt Lightweight Air Hose 1.5" ID x 8' Details:
Manufacturer: Coolshirt
Manufacturer part numbers: 5013-0003
Manufacturer alternate part number: AIRH-8
Color: Black
Hose ID: 1.5"
Length: 8'
Material: Lightweight Composite