Driver Cooling

Two female dry quick-disconnects for any Coolshirt system water line. These are designed to disconnect in an emergency by the force of the driver pulling away from the lines. FEATURES 5/16" female connectors will work with your Coolshirt system (as well as some other cooling products) Sold as a pair  

Coolshirt Motorsports Drain Kit The Coolshirt motorsports drain kit is designed to make draining your shirt and/or cooler quickly and easily. The kit comes with two female connectors, one male connector, and roughly two feet of tubing. To drain your garment just connect it to the the female connectors and hang the garment allowing it to gravity-drain. We recommend that you leave the female connectors in the shirt after it has drained for several hours to allow any excess moisture in the tubes to evaporate. If needed, you can blow a light stream or air (10psi or less) through the garment to aid in the draining process. The male connector and tubing will allow you to plug into the cooler and pump the water out. We recommend that you leave the cooler lip open after pumping the cooler out to allow for any excess moisture to evaporate.

Maglock Air Hose **Maglock Air hose side NOT included** Maglock Air Hose is built to our exact specifications to ensure that you get the lightest, most flexible hose on the market today. The feedback from our test pilots ensures you that neck fatigue during use is greatly reduced, furthermore, this hose does not leverage or disconnect the Maglock Air in high G or high impact environments. Used by top motorsports athletes including all Andretti Indy cars, Ricky Stenhouse Jr. (NASCAR), Ricky Johnson (TT), and Guy Cosmo (IMSA). We highly recommend our hose to be paired with Maglock Air.

Chillout Systems 1.5 Liter Coolant Formula This 1.5 liters of coolant will last a single racer an entire season! Non-toxic and biodegradable coolant that circulates through your Chillout Systems cooler and cooling garments, keeping you cool and your cooler running in prime condition. Does not evaporate, greatly extending the amount of time between refilling your system. Chillout cooling garments encase tubular veins within the material, covering a large surface area of the body to keep you cool, dry, and focused. We suggest you replace the Chillout Coolant in your system at least once per race season. It takes less than two minutes and keeps your cooling system running in peak condition.

BELL Cover plate & FORCED AIR low profile nozzle for HP6/GT6 helmet, clear   Kit consist of:1 Pcs FORCED LOW PROFILE NOZZLE1 Pcs COVER PLATE2 Sets* SEAL KIT *Each SEAL KIT set contains 2 pieces of 20 x 80mm and 2 pieces of 20 x 120mm.

Chillout Systems Hose Connectors (Pair) Designed to withstand wear, these military-grade cooling adapters improve the reliability of the Chillout Quantum Cooler by latching securely and enabling coolant formula to cycle through the system with no leakage. This ultra-durable design allows thousands of dry connections and disconnections. Sold in pairs.

Chillout Systems Dual Prong Adaptor Chillout Dual Prong adapter is what connects to the drivers shirt to provide a single button release from the Chillout Systems cooler hose. Designed to withstand wear, this military-grade dual-prong liquid connector maximizes the reliability of your driver cooling unit. The dual-prong design latches securely, enabling your Chillout hose to be linked to your system while preventing unintentional release. ChillOut Systems Dual Prong Connector Details: Manufacturer: ChillOut Systems Manufacturer Part Number: DPC-1 Works with other ¼" cooling shirts: Yes Quantity: 1 Dual-prong adapter connects Chillout cooling garments (or other brands cooling shirts with tubing) to a Chillout Systems driver cooling system with adapters.

Coolshirt Red Female Bulkhead Fittings Bulkhead fittings for your Coolshirt cooling system. Two (2) are required for each cooler. FEATURES Female bulkhead fittings to replace broken fittings on your Coolshirt cooler Sold individually

CoolShirt 4" Filter Kit Qty 10 Your CoolShirt helmet blower system uses an ultra-lightweight filter to keep dirt out of your forced air helmet. The CoolShirt 5013-0013 kit includes 10 replacement filters to provide a full season of "clean" racing. Fitting both 3" and 4" CoolShirt blower systems, this is a great track side spares kit. CoolShirt 4" Filter Kit Qty 10 Details: Manufacturer: CoolShirt Manufacturer part number: 5013-0013 Fits blower input: 4" or 3" Metal Screen included: No Filter qty: 10  

Coolshirt Maintenance Additive was developed by Coolshirt technicians as the best way to keep Coolshirt driver cooling systems, tubing in your car, and your Coolshirt garments clean and clear of mold. This non-toxic, biodegradable solution contains a fungicide, yet it's safe to use in all Coolshirt cooling systems. Regular use of Coolshirt Maintenance Additive will not only help clean your system, it will also improve the performance and life of the system pump. Use 2 oz. of additive every time your Cooling system is used (6 oz. for the large multi-person pit cooling systems).

CoolShirt 4" Filter and Screen Keep dirt out of your forced air helmet with a CoolShirt replacement filter and screen kit for your CoolShirt 4" inlet air blower system. This is the complete filter & screen kit with 1 filter and one metal screen. This is a must have for all helmet air systems to keep that "dust" and everything else from blowing into your helmet cooling ducts and then into your eyes. A cool helmet blower system that is clean runs longer, faster, and more efficiently. Keep your head as cool as possible with a CoolShirt 4" filter and screen assembly. CoolShirt 4" Filter and Screen Kit Details: Manufacturer: CoolShirt Manufacturer part number: 5013-0014 DiscoveryParts part number: CHI-5013-0014 Fits blower input: 4" Metal Screen included: Yes Filter qty: 1

Chillout Systems Replacement O-Rings (10-Pack) This complete O-ring kit consists of ten universal ringed seals that prevent spillage.

Coolshirt Hose Connectors FEATURES: 5/16" connectors that work with your Coolshirt system as well as others. Sold individually, you'll need two to adapt a garment properly. Choose connector style: Male or Female. SYSTEM COMPATIBILITY (Coolshirt/Momo/F.A.S.T.): Coolshirt MALE connectors work with any FEMALE connector (Coolshirt, Momo or F.A.S.T.). So no matter which system you have, a Coolshirt Coolwater shirt will work with it because of the MALE connector on the shirt. If you own a Momo or F.A.S.T. cooling shirt and want to use it with a Coolshirt system, simply purchase two Coolshirt MALE connectors, snip off the connectors on your shirt, and replace them. That's it! Because the Coolshirt male connectors are universal, your shirt will now be usable with all three major cooling systems. Even if you’ll be racing in another car which uses a F.A.S.T. or Momo system, the new Coolshirt MALE connectors you just pushed on will work with it.