Featured Driver Gear

Discovery Parts Special Edition – Sabelt Hero TG-11 Geckotech Gloves The Discovery Parts Special Edition Sabelt Hero TG-11 Geckotech Racing Gloves deliver FIA 8856‑2018 fireproof protection, gecko‑inspired grip, and an ergonomic fit—everything you need to stay cool and in control on the track. FIREPROOF LIKE A DRAGON'S HIDE Built to meet strict FIA 8856‑2018 standards, these gloves offer maximum flame resistance so your hands stay safeguarded under extreme heat. DISCOVERY PARTS SPECIAL EDITION TG-11 GECKOTECH GLOVE DETAILS Geckotech Grip: Silicon‑infused palms ensure an unshakable hold on the wheel, even in sweaty conditions. Ironclad Durability: Reinforced internal palm construction stands up to race after race without compromise. Ergonomic Fit: Updated design contours naturally around your hand, eliminating bulk and enhancing comfort. Aerodynamic Profile: Sleek styling reduces drag for every fraction‑of‑a‑second advantage. Precision Sizing: Available in sizes 8–12 for a customized fit. DISCOVERY PARTS SPECIAL EDITION AUTO RACING GLOVES FAQ Are these gloves genuine Sabelt Hero TG-11 Geckotech gloves? Yes! They're the result of a collaboration between Discovery Parts and Sabelt to bring you the pro features of TG-11 Geckotech racing gloves featuring the unique Discovery Parts "Star Logo" livery. Are these gloves FIA approved? Yes—they’re homologated to FIA 8856‑2018 for professional motorsport competition. What makes the Geckotech grip unique? The silicon‑infused palm mimics gecko adhesion, delivering superior control in all conditions. How does the Discovery Parts edition differ? This special edition features exclusive Discovery Parts branding alongside the proven Hero TG‑11 performance. Do these run true to size? Yes—these gloves use standard racing‑glove sizing for a consistent, accurate fit. Elevate your performance with the Special Edition Discovery Parts Sabelt Hero TG‑11 Geckotech Racing Gloves—available now and ready to take you across the finish line.

Stilo ST6 GT Composite SA2020 Racing Helmet The Legendary Stilo Composite Helmet - Forever Ahead For over 25 years, Stilo has lead the way in racing helmet innovation and the new ST6 line marks a bold new chapter. With input from Porsche and F1 teams, Stilo developed enhanced front- and top aerodynamics to deliver exceptional performance from the new Stilo ST6 line of helmets. Developed with the world's top drivers from Formula One and endurance racing, the ST6 reflects real-world needs at every level of auto racing. The Stilo ST6 composite helmet is one of the lightest composite helmets on the market. It features enhanced airflow, visibility, and comfort while maintaining market-leading safety standards. Developed with input from the Aston Martin F1 team, every feature of the ST6 -- from the track-tested aerodynamics to the cutting edge dual-lock visor system -- is designed to give racers a performance edge. The brand new Stilo ST6 helmet improves on the market-leading Stilo ST5 in every way, including the following: 10% lighter than Stilo ST5 26% more airflow than Stilo ST5 11% more visibility More comfortable liner and cheek pads More shell sizes for lower weight Improved visor construction for durability and ease of care Higher-quality visor hardware increases reliability Stilo ST6 GT Composite Auto Racing Helmet Features Puro Tech: Stilo's proprietary carbon fiber manufacturing process eliminates the need for extra lacquers and additional coatings, minimizing the weight of your new helmet. With the Puro process, Stilo delivers the lightest and safest helmet on the market. Added Shell Size: now offered in three shell sizes, the Stilo ST6 auto racing helmet gives you the lightest and smallest shell size possible for your head shape. STILO ST6 GT HELMET PAD CUSTOMIZATION CHART Increased Airflow Design: by utilizing key partnerships with Formula One teams, Stilo has redesigned the ST6 front ventilation to increase airflow while maximizing safety. The new Stilo ST6 also comes standard with ventilation holes in the top, channeling airflow through the EPS foam to reduce sweat and moisture, keeping you performing at your best. Increased Downward Visibility: with input from professional drivers around the globe, Stilo has increased the downward field-of-view of the Stilo ST6, making harness fastening easier during driver changes and giving you greater situational awareness on the track. Interior Comfort: new and improved cheek padding in the Stilo ST6 was designed to enhance aero stability and increase comfort. Injection Molded Visor: the brand new visors for the ST6 provide exceptionally clear visibility and are coated in a new high-performance, washable anti-fog treatment. Dual Visor Lock: pioneering the industry, the dual visor lock on the Stilo ST6 complies with FIA standards in both the fully closed and ventilation positions. Updated Visor Hardware: engineered for easier visor installation and smoother actuation, this visor hardware can be purchased in a variety of anodized finishes. Stilo Helmets ST6 GT Composite Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0800AF2V Homologation: FIA 8858-2015 Certification: Snell SA2020 Compatible shields: Stilo ST6 helmet shields Noise-attenuating earmuffs included Other Versions of the Stilo ST6 Racing Helmet Stilo ST6 FN Carbon Fiber Helmet Stilo ST6 GT SA2020 Carbon Fiber Helmet Stilo Helmet ST6 FN 8859-ABP Helmet Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Zero ABP 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Composite Helmet Stilo ST6 FN 8859-ABP Helmet Stilo ST6 GT 8860 Carbon Fiber Helmet Stilo ST6 FN 8860 Carbon Fiber Helmet Stilo ST6 FN 8860-ABP Carbon Fiber Helmet Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet Stilo ST6 GT Composite Auto Racing Helmet Sizing Note We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. Measuring Your Head For Your New Stilo ST6 FN Composite Helmet The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Alpinestars Supertech Racing Shoes Certified to FIA 8856-2018 and SFI 3.3 homologation standards The new Alpinestars Supertech auto racing shoe boasts a new, fully knitted upper construction designed to deliver the closest, most comfortable fit, adapting to the morphology of your feet and improving comfort in the cockpit to reduce driver fatigue. The ultra-lightweight Supertech shoes feature a full carbon heel cup for a secure heel lockdown, holding the foot firmly in place. The shoes have a 3D printed midsole manufactured using Digital Light Synthesis. This optimizes cushioning in key areas: softer under the heel bone, but stiffer at the edges for maximum stability. The memory foam heel padding reduces vibrations transmitted to the heel, reducing discomfort, while the ultra-thin rubber outsole gives the driving feel required for maximum performance. Alpinestars Supertech Key Features Ultra-lightweight, knitted upper offers superior driver comfort in forefoot. Thermo-formed carbon heel cup provides secure heel lockdown. 3D printed midsole offers premium soft cushioning, whilst retaining maximum stability. Alpinestars Supertech Construction Ultra-lightweight racing shoe featuring a fully knitted fire retardant upper, made from a blend of aramidic fibers to offer drivers unsurpassed comfort, and breathability, as well as a precise and secure fit around the foot. Engineered stretch tongue zone and ankle collar area for optimum fit, with rear pull tab for ease of entry while putting on the shoe. Upper overlay skin for durability and support while providing flex points for comfort when walking. Thermo-formed carbon fiber heel cup provides secure heel lockdown. 3D printed midsole allows for multi density cushioning, softer under the heel bone but stiffer at the edges for maximum stability. Redesigned F1-derived ultra-thin rubber outsole delivers greater feel, improved sensitivity with the pedals, and optimum levels of grip. The textured rubber outer sole has an asymmetric tread and is water repelling and oil resistant to offer high levels of grip. Lightweight memory padding around the heel reduces vibrations being transmitted to the heel bone, while the seamless Achilles zone construction provides enhanced driver comfort. Lightweight flat lacing ensures secure fit and reduces pressure points.

HANS IV Frontal Head Restraint Now offered in 3 different sizes, at a lower price, the Hans 4 is a new and improved FHR (Frontal Head Restraint) that is 10% lighter than the previous Hans 3. Custom molded pads which nest into the device, preventing slippage, were designed with an upgraded foam for improved comfort and support. Offered in a 20 - degree option, this FHR is perfect for the entry level driver across many race series. HANS Device 4 Head and Neck Restraints are the lightest HANS Sport Series device to date. HANS 4 Frontal Head Restraints present a contemporary approach to building a lightweight, strong, and safe HANS Device. Now in the fourth generation, HANS Device IV Head Restraints have a new design and polymer with a hollow collar which reduces the weight significantly. Its engineered reinforcements guarantee a very strong structure with a reduced mass. HANS Device IV Frontal Head Restraints provide the same level of safety as every HANS Device with the lightest, most comfortable injection-molded HANS made to date. HANS Device 4 Frontal Head Restraints are developed with ease of driver entry/exit in mind. Its rounded back is lower than the original HANS Device design, reducing the risk of getting caught on a roll cage or in window openings when moving in and out of a racecar. Authentic HANS Devices set the standard in top performance in lab crash testing and real-life race crash results. The HANS 4 is only available in a 20o Layback Angle configuration, suitable for the majority of racing applications including most road racing, HPDE, Stock Cars, Modifieds, Drag, Legends, Bandalero cars.  HANS SPORT 4 HNR FEATURES 10% Lighter than previous models  SFI 38.1 certified  Improved harness retention so belts will not slip  Custom molded pads nest in the device to prevent pads from slipping. Foam is a perfect blend for comfort and support  More available sizes to fit more drivers  3 Different Sizes – Small, Medium and Large  The best price on a HANS device on the market  Three different anchor options: Post Anchor (standard), Quick Click (SFI only), M61 (Sold Separately)  Includes helmet post anchors  Easy to use, no tether adjustment  Offered in both SFI / FIA certification allowing drivers to use the product worldwide  Unlike most entry level devices that are often bulky and uncomfortable; this new and improved design is lighter and more comfortable allowing drivers to focus.  High collar cut away made to not contact the wearer’s neck in rear impacts HANS IV SIZE CHART HANS SPORT 4 HNR FAQS I can touch my chin to my chest with the device on. Are my tethers too long? No. The HANS Device comes properly adjusted for all drivers. Unless you have changed the tether length it is fine and will work in an impact.  When I put the device on, it rubs against my neck. Is that normal?  Yes. The front of the HANS Device is narrower to accommodate arm movement. Padding can be modified or removed - it does not affect the device’s performance.  What type of shoulder belts work best with a HANS Device?  Any SFI or FIA approved harness system works with the HANS Device. Two inch or three inch belts, as well as 5-6 or more multi-point systems are all fine.  Do shoulder belts slip off the HANS Device?  Properly mounted belts do not slip off the device. If shoulder belts will not stay securely on the device, you may not have the belt mounts properly located in your chassis.  I race on a short track at relatively low speeds. Do I need a HANS Device?  Yes. Serious head and neck injuries happen at impact speeds as low as 35mph. On short tracks with tight turns it is easy to be turned almost straight into the wall.  How do I care for my HANS device?  HANS Devices need almost no maintenance but should be kept clean and dry. To protect them, HANS Devices should be stored out of direct sunlight. They may be cleaned with soapy warm water. Ensure rubber top surfaces stay clean and free of wear. Tethers should be replaced after any major impact or every 5 years. Tethers carry dated labels. Check your helmet anchors for tightness occasionally.  What if my HANS Device is in an impact?  HANS Devices should be inspected periodically or after any impacts. Examine your device in bright sunlight and run your finger around the edges. Any sign of de-lamination, cracking or exposed composite material means the device has served its purpose and should be replaced.  How long are the SFI and FIA certifications acceptable?  Different race series may have different rules regarding age of certifications. SFI 38.1 requires recertifying your HANS every 5 years, and FIA 8858 certifications do not expire. Check our website or your race sanctioning body for more information. 

OMP TECNICA SUPER LIGHT Race Suit Featherweight Performance, Maximum Protection—Because Speed Doesn’t Like Extra Baggage. You know that feeling when you’re strapped into your car and adrenaline takes over? The OMP Tecnica Super Light Driver Race Suit is built for those moments—the ones where every millisecond counts, and the last thing you need is a bulky suit slowing you down. Engineered for high-performance drivers who demand lightweight fireproof protection, this suit is designed with cutting-edge materials that keep you cool, comfortable, and focused on the checkered flag. Whether you're battling for position in an endurance race or carving up a track day, the Tecnica Super Light gives you the confidence to push your limits without compromising safety. Why You’ll Love It Ultra-Lightweight Fireproof Protection – Made with advanced 2-layer (2L) inner compound technology, featuring a soft knitted fabric quilted with meta-aramid non-woven fabric. Translation? You’re wrapped in fire-resistant safety without feeling like you’re wearing a medieval suit of armor. Ergonomic, Race-Ready Fit – Bielastic inserts (fancy talk for ultra-stretchy panels) strategically placed to provide maximum flexibility where you need it most. That means a tailored, second-skin fit that won’t restrict your movements when you’re heel-toeing or sawing at the wheel. Stay Cool Under Pressure – Breathable inserts under the arms and at the sides let fresh air circulate, preventing that dreaded “hot suit sauna” effect after a few laps. Smooth Operator – Ultraflat, anti-rubbing seams with fishbone outside top stitching reduce chafing, because the only friction you should be feeling is between your tires and the tarmac. Race-Ready Style – Contrast color details on the pockets, inner collar, and suit edges ensure you look as fast as you drive. Bonus points if it matches your livery. OMP Technica Super Light Race Suit Tech Specifications & Features Homologation: FIA 8856-2018 Approved (because safety always comes first) Material: Lightweight 2L inner compound with soft knitted meta-aramid fabric Stretch Panels: Bielastic inserts for an ergonomic fit Cooling Zones: Breathable panels at sides and underarms Seam Design: Ultraflat anti-rubbing seams with fishbone outside top stitching Fit: Pre-curved arms and legs for natural driving position Weight: Featherlight compared to traditional suits OMP TECNICA SUPER LIGHT Driver Race Suit FAQs Q: Is the OMP Tecnica Super Light suitable for endurance racing?A: Absolutely! It’s built for comfort, breathability, and all-day wearability, so whether you’re doing a 20-minute sprint or a 24-hour endurance race, you’ll stay comfortable. Q: How does the fit compare to other OMP suits?A: It has a tailored, athletic fit, thanks to the stretch panels. If you’re between sizes, we recommend sizing up for a little extra room. Q: Can I wash my race suit?A: Yes, but hand wash with cold water and mild detergent. Don’t toss it in with your gym clothes unless you like the idea of ruining a premium suit. Q: How fire-resistant is this suit?A: It meets FIA 8856-2018 standards, which means it’s built to withstand extreme heat and flames. But let’s hope you never have to test that in action. Ready to Race? Your competitors won’t know what hit them when you show up looking this sharp, feeling this comfortable, and pushing the limits without distraction. Whether you’re shaving tenths off your lap times or chasing down a podium finish, the OMP Tecnica Super Light Driver Race Suit is your ultimate performance upgrade. Don’t wait—gear up and go full throttle! Order yours today!

Sparco Rapid Shoes (Rotor Lace) Dial In Performance, Step Into Style The Sparco Rapid Shoes (Rotor Lace) blend motorsport design with technical innovation for your everyday street or paddock hustle. With the rotor-lacing system, you’re in and out in seconds—no more sloppy knots or dragging laces. And because it’s Sparco, expect Italian style dialed to 11 with a low-profile silhouette that fits in at car meets, pit lane, or post-track beers. Features: Rotor Lace System: The micro-adjustable dial lets you fine-tune fit with a twist. Quick on, quick off—without pressure points. Slim Performance Fit: Designed like a driving shoe, the narrow silhouette delivers pedal feel and foot control whether you're in the driver’s seat or just want to look fast. Reinforced Heel and Toe: Added durability right where you need it for heel-toe action or long days on your feet in the pits. Breathable Materials: Lightweight synthetic uppers keep your feet cool even when the race—or your errands—heats up. Motorsport Aesthetic: Signature Sparco badging, low-cut collar, and performance-ready outsole round out the look. Sparco Rapid Shoes (Rotor Lace) FAQs: Are these shoes good for driving? Absolutely. They’re built for pedal feel and quick movement, making them ideal for performance driving or karting. How does the rotor lace work? Just turn the dial to tighten or loosen. It’s a secure, no-fuss fit every time—especially great when you’re wearing gloves. Do they fit true to size? These are European-fit shoes, so they run a bit narrow. If you’re between sizes or have a wider foot, go one size up. Can I wear them casually? 100%. They’re sharp enough for daily wear and subtle enough to pair with jeans or track pants. The Sparco Rapid Shoes with Rotor Lace system are built for drivers, pit crew, and enthusiasts who want fast gear, fast looks, and fast exits. If you're the kind of person who blips the throttle for no reason, these belong on your feet.

Stand21 Featherlite Frontal Head Restraint (FHR) The Featherlite from Stand21 is a breakthrough technological achievement in the FHR family, offering the absolute highest level of safety while weighing an incredible 310g (10.9 oz.) excluding padding. The use of very high strength carbon fiber combined with a more ergonomic design of the legs makes this FHR the safest, lightest, most comfortable head-and-neck safety device created to date. A revolutionary new integrated strap passage allows a flat curvature along the rear of the Stand21 Featherlite, alleviating uncomfortable interference between your helmet, the FHR device, and your seat. The Stand21 Featherlite is hugely popular among professionals as well as the most demanding amateur drivers. Four Bold New Colors Set Featherlite Apart The Stand21 Featherlite FHR is now available with four fantastic new colored lacquer finishes over the carbon fiber. In addition to traditional gloss clear finish, there are new gloss and matte  red, blue, purple and green finishes! The only HNR to offer colors, this further sets the Stand21 Featherlite apart from the ordinary. Stand21 Featherlite Frontal Head Restraint Details FIA 8858-2010 and SFI 38.1 certified Weight: 310 grams (11 oz.) Unprecedented curvature beam alleviating discomfort between the helmet, FHR, and seat/headrest Revolutionary integral strap passage Available in Medium and Large Available for 20° incline angles Supplied with black padding, sliding tether, and protective bag New, more ergonomic leg design

Alpinestars Cooling Vest Let’s face it—no one’s setting personal bests while drenched in sweat and battling heat exhaustion. Enter the Alpinestars Cooling Vest, your ultimate weapon for conquering those searing hot laps like the track day hero you are. This isn't just a vest; it's your personal pit crew for temperature control. Packed with innovation, this vest features a refillable water chamber and an advanced cooling system that evenly releases moisture as you ride, keeping your core regulated and your head in the game. Stretch inserts ensure a snug fit, while strategically placed ventilation ports deliver a refreshing breeze just where you need it. Bonus: it's so lightweight, you might even forget you're wearing it—until you realize how cool you feel. Features & Benefits: Three-Layer Textile Construction: Designed with a moisture-wicking fleece lining to keep you dry and comfortable. Anatomical Fit: Stretch inserts on the side torso provide a glove-like fit, ensuring no distractions from awkward bunching. Ventilation Ports: Strategically positioned for optimized airflow and breathability. Goodbye, stuffy gear. Innovative Cooling System: Delivers moisture evenly to regulate body temperature and stave off heat exhaustion. Lightweight Design: Never weigh yourself down when you're chasing podium finishes. Anti-Bacterial Properties: Because no one wants a funky-smelling vest post-race. Imagine This... It’s mid-July, the asphalt is radiating heat like a furnace, and yet there you are—shredding through the track, calm, focused, and unbothered by the sun's fury. As your competitors wipe their brows, you're grinning, thanks to the Alpinestars Cooling Vest working tirelessly behind the scenes. It's not just performance gear; it's a game-changer. Specifications: Material: Three-layer textile with fleece lining Fit: Stretch side inserts for enhanced mobility Cooling System: Refillable water chamber for consistent cooling Weight: Ultra-lightweight design Maintenance: Machine-washable with anti-bacterial properties FAQs: How do I refill the water chamber?Simply detach the chamber, fill it with water, and reattach. It’s like refueling, but for your comfort. How long does the cooling effect last?Depending on conditions, expect hours of performance before needing a refill. Can I wear this under my racing suit?Absolutely! It’s designed for seamless integration with racing gear. Is it available in different sizes?Yes, sizes are tailored to fit a range of body types comfortably. Check out our sizing chart for details. Don’t Sweat It—Literally Why let the heat control your day? Gear up with the Alpinestars Cooling Vest and stay cool while leaving the competition in the dust. Add it to your cart now and experience the difference on your next race or track day. Trust us—your future self (and your lap times) will thank you.