Racing Radio Foam Earbuds
Racing Radios Racing Radio Foam Earbuds $95.00
Racing Radio Foam Ear Buds - Universal Foam Driver Earpieces By Racing Radios . Designed with Ultra High Noise Transducers. Plugs directly into Driver Helmet with 3.5mm jack and has a 19" wiring lead. This is the industry standard foam earpiece used by Racing Radios for over 30 years. If we look closer at a Racing Radios earpiece, we notice there are quite a few differences. First, the outer foam piece is softer and closer to a smooth/soft material than the harder foam material used by lesser manufacturers. After a year of racing the foam was still soft, but starting to look pretty nasty, so upon trying to remove the foam I noticed that there is a micro drop of glue on the end of the wire to transducer that locked it to the foam earpiece. To remove the foam, I used a new razor blade and cut the foam like a banana and peeled the old foam out of the way. There I could inspect the perfect micro soldering on what is one of the words smallest (transducers) speaker not used for Top Secret surveillance. To install the new foam covers, I use a pair of tweezers to stretch the hole open for 30 seconds and before the hole closes I slide the mini-transducer into the new foam, keeping the end of the sound tube barely covered by the end of the foam. I put a 1/2 a drop of super glue on the wire to foam area and I am done. Racing Radios is considered the go to for Professional Teams of all series and their quality is second to none. Racing Radios foam earpieces are not the cheapest on the web, but they are the best on the web. Trust Racing Radios for the best in race car driver communication. Racing Radio Foam Ear Buds Details: Manufacturer: Racing Radios Manufacturer part number: CE31/A-FOAMS Helmet connection: Universal 3.5mm Foam Tipped: Yes Wiring Length: 19" Entry level or Pro: Pro [img-6501-left-large_default]
Racing Radios Helmet Earpiece Jack
Racing Radios Racing Radios Helmet Earpiece Jack $35.00
Racing Radios Helmet Earpiece Jack This is the piece that connects your ear pieces to your helmet cord. Heat shrink on gold plated connections provide years of trouble free communications, in the harshest of weather conditions. This is a true pro level motorsports piece of equipment. This is the new version that accepts stereo and mono ear pieces. Racing Radios Helmet Earpiece Jack Connector: Manufacturer: Racing Radios Manufacturer Part Number: HKP-123100-H Weatherproof: Yes Earpiece Connection Size: Universal Mono & Stereo Entry level or Pro: Pro [img-2301-left-large_default]
Racing Radios 4-C IMSA Helmet Coil Cord
Racing Radios Racing Radios 4-C IMSA Helmet Coil Cord $60.00
Racing Radios 4/C IMSA Helmet Coil Cord Racing Radios 4 Conductor IMSA Helmet Coil Cord. This IMSA coiled cable for your helmet kit makes driver changes even easier by allowing you more movement to prevent accidental disconnects. If you have a head containment seat, this is a necessary item as the straight cord becomes bound up on the head containment portion of your race seat. Racing Radios IMSA Helmet Coil Cord (4 Conductor) Details: Manufacturer: Racing Radios Manufacturer part number: HKP-1214010-H Car Harness End: IMSA (4 Conductor) Helmet End: Open (4 wires) Straight or Coiled: Coiled Gold Tipped Connections: Yes Entry level or Pro: Pro [img-2300-left-large_default]
Racing Radios Helmet Mini Microphone Kit
Racing Radios Racing Radios Helmet Mini Microphone Kit $110.00
Racing Radios Helmet Mini Microphone Kit Pro Level Racing Radios Mini Dynamic Noise-Cancelling, Flexible Boom Microphone for your helmet. The Noise canceling microphone is an essential part to any helmet kit. This microphone will cancel out background and engine noise to provide clear communication from the driver. Racing Radios Helmet Mini Microphone Kit Details: Noise Canceling: Yes Microphone Size: Mini Entry level or Pro: Pro Manufacturer: Radio Connector Manufacturer Part Number: HKP-126120 [img-2311-left-large_default]
Racing Radios NASCAR Helmet to IMSA Chassis Adapter
Racing Radios Racing Radios NASCAR Helmet to IMSA Chassis Adapter $95.00
Racing Radios NASCAR Male Helmet to IMSA Female Chassis Adapter If you have a NASCAR 3/C plug on your helmet and an IMSA 4/C Harness in the car, this adapter will go in line between your helmet and the harness to convert your 3/C output to a 4/C output. This cable is handmade in America using a Nexus plug and magnetically shielded cabling. Racing Radios NASCAR Male to IMSA Female Adapter Details: Manufacturer: Racing Radios Manufacturer part number: RRC-10 Connector 1 / Helmet Side: NASCAR 3C Female Connector 2 / Chassis Side: IMSA 4C Male [img-2298-left-large_default]
Racing Radio Velcro Earpiece Mount Tab Kit
Racing Radios Racing Radio Velcro Earpiece Mount Tab Kit $3.00
Racing Radio Earpiece Mount Tab Kit Racing Radio Earpiece Mount Tab Kit uses a hourglass shaped tab to wrap around your earbud jack that secures to a matching tab (included) that you mount inside your helmet against the inside shell. This kit allows for securely mounting your Racing Radios ear bud jack to your helmet with no drilling. Racing Radio Earpiece Mount Tab Kit Details: Manufacturer: Racing Radios Manufacturer part number: VELCRO-TAB
Racing Radios IMSA Helmet to NASCAR Chassis Adapter
Racing Radios Racing Radios IMSA Helmet to NASCAR Chassis Adapter $80.00
Racing Radios IMSA Male to NASCAR Female Adapter If You Have An IMSA 4/c Plug On Your Helmet and a NASCAR 3/C Harness in the car, this adapter will go in line between your helmet and the harness to convert your 4/C output to a 3/C output. This cable is handmade in Racing Radios US office in Forest Park Georgia using genuine Nexus plugs and magnetically shielded cabling. Short Connector On Your Helmet, Long Connector on Car Harness. Racing Radios IMSA Male to NASCAR Female Adapter Details: Manufacturer: Racing Radios Manufacturer part number: RRC-20 Connector 1 / Helmet Side: IMSA 4C Female Connector 2 / Chassis Side: NASCAR 3C Male
Racing Radio Replacement Foam for Earbuds
Racing Radios Racing Radio Replacement Foam for Earbuds $4.95
Racing Radio Replacement Foam for Ear Buds If you have a set of driver earpieces on which the foam is starting to get worn, this is the direct replacement to easily bring your earbuds back to the DB lowering, nice looking and feeling fit once again. How to replace the foam on the end of your drivers earpieces: Cut the old foam earpieces using a new razor blade - slicing like a banana without cutting the wire, transducer, or sound tube Peel off the foam and use your finger nail or the edge of tweezers to remove the remaining glue Insert the tweezers into the foam hole and stretch the hole from the flat side of the foam for 30 seconds Slide the transducer into the elongated hole until the sound tube is near the end of the round part and let sit for 1 minute Put a micro dot of super glue on the wire to foam connection on flat side and you are done Racing Radio Replacement Foam for Ear Buds Details: Manufacturer: Racing Radios Manufacturer part number: CE31/A-FOAMS-COVERS Qty in kit: 2 [img-6502-left-large_default]
Racing Radios Helmet Microphone Kit
Racing Radios Racing Radios Helmet Microphone Kit $80.00
Racing Radios Helmet Microphone Kit Racing Radios Helmet Large M101 Style Dynamic Noise-Cancelling Flexible Boom Microphone.
Racing Radios 3-C NASCAR Helmet Coil Cord
Racing Radios Racing Radios 3-C NASCAR Helmet Coil Cord $60.00
Racing Radios 3/C NASCAR Helmet Coil Cord 3-conductor NASCAR coiled cable for your helmet kit. By using a coiled cord, the driver can have greater mobility, even with the tght head containment seats used in modern race cars. The helmet side is 3.5mm and 3C (3 Conductor) and looks similar to an electric guitar or of you are old enough, 8 track headphones. Racing Radios 3/C NASCAR Helmet Coil Cord Details: Manufacturer: Racing Radion Manufacturer part number: RR-HKP-121020 End 1 fitting: 3.5mm 3 conductor End 2 fitting: 4 gold plated terminals (male) [img-2310-left-large_default]
Racing Radios 4-C IMSA Helmet Kit (Coil Cord)
Racing Radios Racing Radios 4-C IMSA Helmet Kit (Coil Cord) $200.00
Racing Radios 4/C IMSA Style Helmet Kit with Coil Cord 4 Conductor IMSA Coil Cord Helmet Kit By Racing Radios is used mostly in sports car racing - IMSA, NASA, ChampCar, SCCA, and more. The coiled cable allows the driver to have some movement with the helmet. Comes with 3.5mm earpiece connection and top of the line noise canceling microphone. Racing Radios 4/C IMSA Helmet Kit with Coil Cord Details: Manufacturer: Racing Radios Manufacturer part number: HK4C-COIL Coil cord: IMSA Microphone: Mini noise cancelling Instillation kit included: Yes Instructions included: Yes
Racing Radios IMSA Extension Coil Cord
Racing Radios Racing Radios IMSA Extension Coil Cord $92.00
Racing Radios IMSA Extension Coil Cord Designed to extend your IMSA helmet connection when the car harness is not located where you need it. One side has a female IMSA connector and the other a male IMSA connector. An easy to extend coil cord keeps your wiring neatly snug, but allows ease of movement. Racing Radios IMSA Extension Coil Cord Details: Manufacturer: Racing Radios Manufacturer part number: HEC-10 End 1: IMSA Female End 2: IMSA Male Center: Coil cord [img-8811-left-large_default]
Acoustic Tube In-Ear Surveillance Kit
SpeedCom Communications Acoustic Tube In-Ear Surveillance Kit $49.95
Acoustic Tube In-Ear Surveillance Kit Acoustic Tube In-Ear Surveillance Kit connects to your Motorola hand held radio and allows complete communication (transmit and receive) with one piece. Listening to requests from crew members and driver coaches who want the smallest/simplest/rugged communications piece, the ARSK is the answer. Working from the commercial Motorola Handheld Radios, the harness splits to a mini-snap action push to talk (PTT) and also goes to your earpiece. The single earpiece is a single wire acoustic tube that fits left or right ears. A miniature lapel microphone has a small metal clip for easy positioning. Acoustic Tube In-Ear Surveillance Kit Details: Manufacturer part number: RR-SURV KIT Easy and convenient to use. Single wire acoustic tube for left or right ear compatibility. Designed for left or right ear use. Small lapel PTT with inline PTT/ Mic and metal clip. Fits Motorola Commercial Standard Two-Pin Style Radios, CP100, CP150, CP200, CT150, CT250, CT450, CT450LS, GP2000, GP300, GP308, GP68, GP88,GTI, GTX, LTS2000, PR400, P040, P080, P110, P1225, P1225LS, P200,PRO3150, SP10, SP21, SP50, XTN446, XTN500, XTN600, XV1100, XV2100, XU1100, XU2100, XU2600 Fits Motorolla consumer radios: No, these have a different pin spacing Entry level or Pro: Pro Working from the commercial Motorola Handheld Radios, the harness splits to a mini-snap action push to talk (PTT) and also goes to your earpiece. The single earpiece is a single wire acoustic tube that fits left or right ears. A miniature lapel microphone has a small metal clip for easy positioning. [img-9255-left-large_default]
Racing Radios Full-Custom Earbuds
Racing Radios Racing Radios Full-Custom Earbuds $199.95
Racing Radios Full-Custom Earbuds Designed with Ultra High Noise Transducers, Racing Radios Full-Custom Driver earpieces plug directly into driver helmet with 3.5mm jack. The industry standard full-custom earpiece used by Racing Radios for over 30 years. Send us your custom ear molds from your audiologist and we will make you a complete custom set of earpieces. You get to choose the colors and we take iy from there. Normal time from delivery to us to return to you is 10-14 days. DiscoveryParts Pro Tip: Choose Red as your right and Blue as your left to make night racing install easy (and they will also look cleaner).
Racing Radios 3-C NASCAR Helmet Kit (Coil)
Racing Radios Racing Radios 3-C NASCAR Helmet Kit (Coil) $200.00
Racing Radios 3/C NASCAR Style Helmet Kit (Coil) 3/Conductor NASCAR Coil Cord By Racing Radios Allows the driver to have some movement with the helmet. The kit comes with 3.5mm earpiece connection and top of the line noise canceling microphone. *Comes with installation instructions and mounting hardware*