Lifeline Fire & Safety Systems
Lifeline T Handle Fire Extinguisher Pull Cables 12 foot
$34.99
Lifeline T Handle Fire Extinguisher Pull Cables 12 foot
12 foot pull cable for Lifeline mechanical systems. Generally used for exterior applications.
Lifeline Fire & Safety Systems
Lifeline T Handle Fire Extinguisher Pull Cables 6 foot
$22.99
Lifeline T Handle Fire Extinguisher Pull Cables 6 foot
6 foot pull cable for Lifeline mechanical systems. Generally used for interior applications.
Lifeline Fire & Safety Systems
Lifeline 1/4bspt x 8mm 2 Way Outlet
$18.49
Lifeline 1/4bspt x 8mm 2 Way Outlet
Replacement t-style outlet for fire suppression bottles with 8mm decabon.
Lifeline Fire & Safety Systems
Lifeline Equal T Connector 8mm
$28.49
Lifeline Equal T Connector 8mm
Fire Suppression System, Equal T Connector Type Zero 360 & Zero ZERO (8mm).
Lifeline Fire & Safety Systems
Lifeline Electrical Cockpit Switch w/ Plastic Bezel
$20.99
Lifeline Electrical Cockpit Switch w/ Plastic Bezel
This LifeLine electrical cockpit switch is a replacement for your old or damaged switch. Suitable for use with all Lifeline electrical systems.
Red Line
Red Line Lightweight Racing ATF
$17.49
Red Line Light Weight Racing ATF
Red Line engine and transmission lubricants have long been the choice of racers and knowledgeable engine builders.
The thermal stability, film strength and reduced parasitic drag found in Red Line transmission gear oil all contribute to lower operating temperatures, increased engine life and more power. Red Line's racing heritage is reflected in all of their products, so you’ll see more Red Line products at the track than any other lubricant manufacturer.
Red Line Gear Oil for Automatic Transmissions Details:
Manufacturer: Red Line
Manufacturer part number: 30314
Size: Quart
Reduced oxidation and lower volatility at high temperature
Allows high-temp operation without varnishing valves and clutches
Extended drain intervals
Red Line Light Weight racing automatic transmission fluid offers superior consistency and wear protection for drag racing automatic transmissions. This fully synthetic formula dissipates heat for longer transmission life, along with better clutch, gear, and seal life.
Red Line Light Weight automatic transmission fluid has a low viscosity, reducing frictional drag for quicker ETs and more mph. It contains no slipperiness additives, so your shifts are faster and lockup is quicker. Red Line Light Weight racing automatic transmission fluid offers extreme-pressure protection for much better film strength.
Schroth Safety Products LLC
Schroth Reinforcement Plates M10
$23.75
Schroth Reinforcement Plates M10
Schrtoth SG55 reinforcement plates, also called back-up plates by many chassis builders, are used when reinforcing a harness mount point when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor.
Schroth Racing SG55 Reinforcement Plate Details:
Manufacturer: Schroth
Manufacturer part number: SG55
Length: 3.25"
Width: 2"
Welded Nut Size/Pitch: M10
Finish: Zinc Plated
Material: Steel
Quantity in kit: 1
Schroth M8 Reinforcement Back-Up Plates make for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a M10 nut welded to it. This is what comes with most Schroth harness sets to mount your harness eye bolt to.
This back-up plate is what comes standard issue with most Schroth Racing Harness kits
Schroth Safety Products LLC
Schroth Reinforcement Plates M8
$12.50
Schroth Reinforcement Plates M8
Schrtoth SG54 reinforcement plates, also called back-up plates by many chassis builders, are used when reinforcing a harness mount point when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor.
Schroth Racing SG39 Reinforcement Plate Details:
Manufacturer: Schroth
Manufacturer part number: SG54
Length: 3.25"
Width: 2"
Welded Nut Size/Pitch: M8
Finish: Zinc Plated
Material: Steel
Quantity in kit: 1
Schroth M8 Reinforcement Back-Up Plates make for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a M8 nut welded to it. This is what comes with most Schroth harness sets to mount your harness eye bolt to.
This back-up plate is what comes standard issue with most Schroth Racing Harness kits
OMP Racing
NRG Mustang/Focus/Fiesta Steering Wheel Hub
$135.99
NRG Mustang Steering Wheel Hub
Ford Mustang, Focus, Fiesta, Mazda 2 and 3 Racers - this is the steering wheel hub adapter you want. Smaller than the competition, so no trimming of the dash panels or gauge cluster is required. NRG Innovation Steering Wheel Adapter for your 2005-2015 Mustang is the number one best seller. This hub is designed utilizing one piece solid construction for the maximum in durability.
This hub has a HEX female hole.
NRG Inovations has machined a piece of aluminum that is worthy of the highest level race or show cars. It does not just look the part, but is ready for years of track abuse. Precision machines, awesome finish, and ready for easy install in your prized 2005-2015 Mustang, 2000-2014 FOcus, 2011-2014 Fiesta. Bonus, it also fits Mazda 2 (2011-2014) and Mazda 3 (2004-2014)
NRG Innovation has developed another complement to their quick release steering kits. These units were designed specially so that an aftermarket steering wheel installed with the quick release kit still mounts in the same location, not too close to the driver. Made from the highest quality aluminum. NRG's Short Hubs are made to work with NRG quick releases.
NRG Mustang/Focus/Fiesta Steering Wheel Hub is Compatible With:
2005-2015 Ford Mustang
2000-2014 Ford Focus
2011-2014 Ford Fiesta
2011-2014 Mazda 2
2004-2014 Mazda 3
NRG Mustang/Focus/Fiesta Steering Wheel Hub Details:
Manufacturer: NRG Innovations
Manufacturer part number: SRK-175H
Garmin Ltd.
Garmin Catalyst Polarized lens Filter
$29.99
Garmin Catalyst Polarized lens Filter
The Garmin Polarized Lens Filter is an essential addition to every catalyst camera. Attach this polarized lens cover to your compatible camera device to increase video clarity and reduce reflections. Almost every Professional Photographer and videographer in motorsports uses a polarized filter on their cameras.
Longacre
Longacre 0-60 psi Semi Pro Digital Tire Gauge
$99.99
Longacre Semi Pro Digital Tire Gauge 0-60 psi
Longacre Semi Pro Digital Tire Gauge 0-60 psi keeps the highest value racecars at the front of the pack. Longacre Semi Pro Digital Tire Gauge 0-60 psi is a trackside favorite with many teams from ChampCar to IMSA.
Longacre Semi Pro Digital Tire Gauge 0-60 psi Details:
Manufacturer: Longacre
Manufacturer part number: 53003
2 1/2" face with larger easy-to-read numbers
Reads to .1 psi with .5% accuracy (1/2 of 1%)
Air release button
17" hi-flex hose with swivel angle chuck - also includes ball chuck
External gauge bumper
Auto Off: Yes, to save battery
PSI and Metric: Yes
Batteries: 2 user replaceable AAA batteries included
Tire Pressure Gauge Type: Digital
Gauge Range: 0-60 psi
Inflator: No
Gauge Face Color: Red
Gauge Size (in): 2 1/2 in. diameter
Hose Length (in): 17.000
Lighted: Yes
Bleed Valve: Yes
Storage Case Included: No
Sparco S.p.A.
Sparco ADV XT Racing Seat | FIA 8855-2021
from $2,100.00
Sparco ADV XT 8855-2021 Racing Seat
Special Order (8-10 weeks) & Non-Refundable
Elevate Your Racing Performance with the Sparco ADV XT 8855-2021 Racing Seat. Now you can enjoy your new race seat for up to 10 years. (Requires Sparco Side Mount 004932 in order to qualify for the 10 year FIA certification. You can select this side mount when ordering your seat.)
ELEVATE YOUR RACING PERFORMANCE
Introducing the Sparco ADV XT 8855-2021 Racing Seat, the pinnacle of racing comfort and safety. Designed to meet the rigorous standards of the FIA 8855-2021 certification, this seat combines cutting-edge technology with exceptional craftsmanship to deliver an unparalleled racing experience.Safety is paramount in motorsport, and the Sparco ADV XT Racing Seat is engineered to provide uncompromising protection. Constructed with a sturdy tubular frame and utilizing high-quality materials, this seat ensures exceptional durability and resilience. It has been rigorously tested to meet the stringent FIA 8855-2021 safety standards, providing you with the confidence to push your limits on the track.But the Sparco ADV XT Racing Seat doesn't stop at safety. It also delivers exceptional comfort, keeping you focused and comfortable during those intense racing sessions. The ergonomic design conforms to your body, providing optimal support and reducing driver fatigue. With its plush padding and premium upholstery, this seat enhances your overall comfort, enabling you to maintain peak performance throughout every race.Experience precision control like never before with the Sparco ADV XT Racing Seat. Its advanced design features integrated side and backrest bolsters that can be easily adjusted to your preferences. This customizable fit ensures optimal stability, allowing you to make precise maneuvers with ease, giving you the competitive edge you need to outperform your rivals.Visually striking and flawlessly crafted, the Sparco ADV XT 8855-2021 Racing Seat is a true embodiment of style and functionality. Its sleek and aerodynamic design, complemented by intricate stitching and attention to detail, will make a statement in any race car interior.When it comes to performance, safety, and comfort, the Sparco ADV XT 8855-2021 Racing Seat exceeds expectations. Its 10-year 8855-2021 certification highlights its exceptional quality and long-lasting durability, ensuring it will be your trusted companion for countless racing adventures.Take your racing experience to the next level with the Sparco ADV XT 8855-2021 Racing Seat. Unlock unparalleled safety, comfort, and performance on the track. Don't settle for anything less than the best—choose Sparco and dominate the competition.
WHAT IS 8855-2021 CERTIFICATION?
The FIA 8855-2021 certification is a safety standard established by the Fédération Internationale de l'Automobile (FIA), the governing body for motorsport. It specifically pertains to racing seats and sets forth a set of stringent criteria that must be met to ensure the highest level of safety for drivers.The certification encompasses a range of requirements related to the design, construction, and performance of racing seats.
These requirements include:
Impact Resistance: Racing seats must be able to withstand high-impact forces and provide effective protection to the driver in the event of a crash. They undergo rigorous testing to ensure they can withstand these forces without compromising driver safety.
Load-Bearing Capacity: Racing seats are subjected to tests to determine their load-bearing capacity. This ensures that they can support the weight of the driver and maintain their structural integrity under intense racing conditions.Flame Resistance: Racing seats must be constructed from materials that are resistant to fire. This is crucial in motorsport, as a fire incident can occur in the event of a crash. The FIA 8855-2021 certification requires seats to meet specific flame resistance standards to enhance driver safety.
Durability: Racing seats undergo tests to evaluate their durability over an extended period of time. This ensures that they can withstand the demands of racing, including vibrations, impacts, and repeated use, without compromising their structural integrity.It is important for racers to choose seats that are certified under the FIA 8855-2021 standard, as it ensures they are investing in a product that meets the highest safety standards set by the governing body of motorsport. By selecting FIA-certified seats, drivers can have confidence in the safety and performance of their racing equipment, allowing them to focus on pushing their limits on the track.
The 10-year 8855-2021 certification is a remarkable achievement that sets the Sparco Master Racing Seat apart from its competitors. This certification signifies that the seat meets the rigorous safety standards established by the Fédération Internationale de l'Automobile (FIA), the governing body for motorsport safety.The FIA 8855-2021 standard is specifically designed to ensure the highest level of safety for racing seats. It encompasses a comprehensive set of criteria that must be met, including impact resistance, load-bearing capacity, flame resistance, and durability. Undergoing rigorous testing and evaluation, the Sparco Master Racing Seat has proven its ability to withstand extreme conditions and provide optimal protection to the driver.The 10-year certification is a testament to the seat's exceptional build quality and longevity. It means that the Sparco ADV XT Racing Seat is built to last, with materials and construction techniques that are designed to withstand the demands of competitive racing over an extended period of time. This certification provides peace of mind to racers, knowing that their investment in the Sparco ADV XT Racing Seat will serve them well for many years to come.Moreover, the 10-year certification demonstrates Sparco's commitment to excellence and their dedication to ensuring the highest level of safety in motorsports. Sparco, renowned for their expertise in producing high-performance racing equipment, has consistently pushed the boundaries of innovation to deliver products that meet and exceed industry standards.Choosing a racing seat with a 10-year 8855-2021 certification means you're making a wise investment in your safety and long-term racing endeavors. It's a clear indication that the Sparco ADV XT Racing Seat has undergone rigorous testing, proven its exceptional quality, and is recognized by the FIA as a product that meets the highest safety standards.
SPARCO ADV XT RACING SEAT DIMENSIONS
Sparco S.p.A.
Sparco Pro Master 8855-2021 Racing Seat
from $2,200.00
Sparco Master 8855-2021 Racing Seat
Special Order Item: Estimated lead time 8-10 weeks. Non-cancelable and non-returnable.
The Sparco Master 8855-2021 Racing Seat represents the next generation of FIA-approved racing seat technology, combining advanced safety, exceptional comfort, and long-term durability in a professional-grade competition seat. Engineered to meet the latest FIA 8855-2021 homologation standard, the Master is designed for serious racers who demand the highest levels of driver protection and performance.
Featuring an ergonomic shell design, adjustable support cushions, and advanced impact-management technology, the Sparco Master delivers outstanding comfort during long race sessions while maintaining the support and containment required for professional motorsport competition.
One of the most significant advantages of the Master is its FIA 8855-2021 homologation, which allows for a 10-year service life when installed with the approved Sparco side mounting brackets. This extended homologation period can significantly reduce long-term ownership costs while ensuring compliance with current racing regulations.
*Requires Sparco Side Mount Bracket 004919 to qualify for FIA's full 10-year homologation period.
Built to the Latest FIA 8855-2021 Standard
The FIA 8855-2021 standard is the newest generation of FIA seat homologation, introducing enhanced testing requirements for strength, impact protection, energy absorption, and durability. Compared to previous standards, FIA 8855-2021 seats are engineered to provide improved protection in severe racing incidents while offering a longer homologation period.
The Sparco Master was developed to meet these stringent requirements, making it an excellent choice for road racing, endurance racing, GT competition, club racing, and professional motorsport applications.
Sparco Master 8855-2021 Features
FIA 8855-2021 homologated racing seat
Eligible for 10-year FIA homologation period when used with approved Sparco side mounts
Professional-grade fiberglass composite shell construction
Advanced impact-energy management design
Integrated head and shoulder containment system
Adjustable side and backrest support cushions
Optimized ergonomics for reduced driver fatigue
Breathable fire-retardant upholstery materials
Excellent lateral support and driver containment
Designed for modern professional motorsport applications
Why FIA 8855-2021 Matters
FIA 8855-2021 is the latest global standard for racing seat safety and durability. Seats certified to this standard undergo extensive testing to evaluate:
Impact Resistance: Ability to withstand high-energy crash loads.
Structural Strength: Enhanced shell rigidity and load-bearing capacity.
Flame Resistance: Compliance with FIA fire-safety requirements.
Durability: Long-term performance under racing conditions.
Driver Protection: Improved occupant support during impact events.
For racers competing under modern FIA regulations, FIA 8855-2021 homologation provides confidence that the seat meets the latest safety requirements recognized throughout international motorsport.
Technical Specifications
Homologation: FIA 8855-2021
Homologation Duration: Up to 10 years when installed with approved Sparco side mounts
Seat Type: Competition Racing Seat
Shell Construction: Fiberglass Composite
Mounting Type: Side Mount
Harness Compatibility: Multi-Point Racing Harnesses
HANS Compatible: Yes
Upholstery: Fire-Retardant Fabric
Why Choose the Sparco Master 8855-2021?
The Sparco Master delivers everything serious racers demand: FIA's latest safety certification, exceptional comfort, professional-grade containment, and an extended 10-year homologation period. Whether you're competing in endurance racing, club racing, GT competition, or professional motorsport, the Master provides the protection, durability, and confidence needed to perform at your best.
For drivers looking to maximize both safety and long-term value, the Sparco Master stands among the most advanced FIA 8855-2021 racing seats available.
Sparco Master 8855-2021 Dimensions
```
Garmin Ltd.
Garmin Catalyst Camera Low Profile Windshield Mounting Kit
$24.95
Garmin Catalyst Low Profile Adhesive Mounting Kit
To mount the camera for the award winning Garmin Catalyst to a race car, we prefer the Garmin Catalyst Low Profile Adhesive Mounting Kit. It includes a small low profile ball joint with an adhesive base for mounting your Garmin Catalyst Remote Cam.
DETAILS
Manufacturer: Garmin Ltd.
Manufacturer Part Number: 010-12530-04
Fits Garmin Catalyst Remote Camera
We have many racers who like to take their Garmin Catalyst from their race car to their HPDE car. The Garmin Low Profile Adhesive Mounting Kit is a track-worthy way to mount your Catalyst in your race car and your track-day car!
Stilo S.r.l.
Stilo WRC Venti ZERO Carbon Fiber Helmet 8860-2018
from $6,500.00
STILO WRC Venti ZERO 8860-2018 Carbon Fiber Helmet - Uncompromising Safety and Performance
The new Stilo WRC Venti Range ZERO celebrates the twenty year anniversary of Stilo Helmets and features lightweight and durable carbon fiber construction using the smallest of three available carbon fiber shells for for the smallest and lightest helmet available. The Stilo WRC Venti ZERO helmet shell is manufactured in the Stilo carbon fiber factory in Italy. It is made even lighter using the innovative PURO technology from Stilo which saves weight by eliminating the final clear coat layer, providing maximum protection without compromising on weight or comfort. Designed specifically for motorsport enthusiasts, the Stilo WRC Venti Range ZERO is built to withstand the demands of high-speed racing, ensuring optimal safety during intense driving scenarios. Stilo WRC Venti Range ZERO Carbon Fiber Helmet is FIA 8860-2018 Certified: This Stilo WRC Venti Range ZERO Carbon Fiber Helmet holds the prestigious FIA 8860-2018 certification, meeting the highest safety standards set by these renowned organizations. It guarantees top-tier protection for professional and amateur racers alike.With its unique ventilation system, the Stilo WRC Venti Range ZERO offers superior airflow, keeping you cool and focused even during long races or under extreme conditions. Stilo WRC Venti Range ZERO Carbon Fiber Helmet's aerodynamic design reduces drag, allowing for enhanced performance and improved stability at high speeds, giving you a competitive edge on the track.The interior padding of the Stilo WRC Venti Range ZERO can be easily removed and cleaned, ensuring a fresh and comfortable fit for every race. Stilo WRC Venti Range ZERO Carbon Fiber Helmet is equipped with innovative noise-canceling features from the redesigned boom with all new geometry for maximum visibility and sound quality, this minimizes external distractions, allowing you to maintain focus and concentration on the track ahead. The Stilo WRC Venti Range ZERO features an all new aggressive design featuring an adjustable visor, providing optimal visibility and allowing you to customize your field of view for different driving conditions.The Stilo WRC Venti Range ZERO Carbon Fiber Helmet is a professional-grade helmet trusted by professionals, the Stilo WRC Venti Range ZERO is the pinnacle of safety and performance in motorsport, offering uncompromising quality for your racing needs.
Invest in the Stilo WRC Venti Range ZERO Carbon Fiber Helmet today and experience unparalleled safety, comfort, and performance on the racetrack. Dominate every curve with confidence and stay ahead of the competition.The Stilo Venti WRC is the update of the legendary WRC helmet as worn by multiple rally champions. This helmet features many improvements most notably the innovative wireless (WL) communication system.
The Stilo Venti WRC rally helmet retains the market-leading Stilo WRC helmet electronics system but the comms port has been re-designed for use with the WL wireless key (sold separately) which, when fitted fits perfectly with the contours of the shell shape so it does not interfere with FHR posts or straps. The new wireless key available allows the driver and co-driver to continue to communicate even when outside of the car.
The microphone boom shape has been improved to further deflect cabin noise, improving the communication clarity between co-driver and driver. The magnetic dynamic, noise-canceling microphone is adjustable to allow for optimum spacing from the mouth to reduce external noise. Noise attenuating ear muffs in the Stilo Venti WRC surround the speakers to hugely reduce external noise and improve the levels of comfort. The Stilo Venti WRC ZERO helmet's electronics is also compatible with traditional Stilo wired amplifiers or the new wireless amplifiers.
The Adjustable Peak of the Stilo Venti WRC ZERO helmet can be raised/lowered to give clear optimal visibility with low sun.
Supplied with factory fitted HANS Post anchors as standard.
Be sure to include a DP Evo helmet bag with your order to protect your new Stilo WRC Venti Zero Carbon Fiber Helmet
Measuring Your Head for a Stilo WRC Venti ZERO Carbon Fiber Helmet
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship with signature required for delivery.
Stilo WRC Venti ZERO Carbon Fiber Helmet Frequently Asked Questions (FAQ):
Remember that safety is paramount in auto racing, and choosing the right helmet and maintaining it properly is essential for your protection on the track. Always consult with the professionals at Discovery Parts and refer to the manufacturer's guidelines for specific questions about your racing helmet.
Why do I need a racing helmet?
Auto racing helmets are designed to protect drivers from head injuries and fire during high-speed races and crashes. They are a crucial safety component in motorsports.
How do I choose the right size Stilo WRC Venti Zero Carbon Fiber helmet? You should measure your head's circumference using a flexible tape measure, then refer to the manufacturer's sizing chart to select the appropriate size helmet. Please review our blog posting on how to properly fit your new auto racing helmet from Discovery Parts.
What safety standards should I look for in a racing helmet? Look for helmets that meet safety standards like Snell and FIA depending on your racing discipline. These standards ensure the helmet's safety and quality. DOT helmets are designed for street use and not for racing and track use.
What's the difference between full-face and open-face, and helmets? Full-face helmets provide the most protection with a complete face shield, while open-face helmets cover the top and sides of the head.
Can I use a motorcycle helmet for auto racing? No, motorcycle helmets do not provide the same level of protection as auto racing helmets, as they are designed for different purposes. It's recommended to use a helmet specifically designed for auto racing which includes fire protection in addition to impact protection.
How often should I replace my Stilo WRC Venti Zero Carbon Fiber auto racing helmet? Auto racing helmets should be replaced every 5-10 years, depending on the manufacturer's recommendations and usage. If the helmet is involved in a crash, it should be replaced immediately.
Are expensive racing helmets safer than budget ones? Safety standards dictate the minimum safety requirements, so even budget-friendly helmets can offer protection. However it’s important to consider how lower-priced helmets are meeting the required testing standards. More expensive helmets are lighter, smaller, are constructed of superior materials, and often come with additional features then less expensive helmets.
How do I maintain and clean my Stilo WRC Venti Zero Carbon Fiber racing helmet? Follow the manufacturer's instructions for cleaning and maintenance. You should clean the exterior, interior and shield with the Molecule Helmet Care Kit.
Do I need to wear a balaclava under my Stilo WRC Venti Zero Carbon Fiber racing helmet? Balaclavas are typically not required for Driver's Education events, however they make wearing a helmet much, much more comfortable. Balaclavas will provide fire protection (if fire rated), help keep your helmet lining clean and order free by absorbing the majority of sweat while using it, and additionally balaclavas make putting your helmet on and taking it off by protecting your ears and keeping from from folding over when you helmet is worn. Discovery Parts recommends balaclavas from Alpinestars, OMP, Sabelt, Sparco, and Stand21. If you are entering sanctioned auto racing events, balaclavas will be required for fire protection.
Is the SNELL SA Rating important? The Snell SA2020 certification is a safety standard established by the Snell Memorial Foundation for auto racing helmets. It sets the criteria and requirements that helmets must meet to be considered safe and suitable for use in motorsport events. Snell SA2020 certification is highly regarded in the motorsports industry and is often required or recommended by racing organizations and events. It signifies that a helmet has passed rigorous testing to provide maximum safety for drivers in various motorsport disciplines, including road racing, NASCAR, Formula 1, drag racing, and more. It's essential for drivers to check the specific safety standards required by the racing organizations they participate in to ensure compliance.
Is the FIA helmet certification important? Yes, FIA (Fédération Internationale de l'Automobile) certification is crucial for auto racing helmets, especially in the context of international motorsport events and many national and regional racing series in the USA. The FIA 8859-2015 standard is commonly associated with racing helmets used in various motorsport disciplines. Helmets certified to FIA 8859-2015 met the safety requirements set by the FIA and were widely accepted in many racing series
Which helmet certification is the most stringent and the hardest to meet? The FIA 8860-2018 certification is considered the most stringent and advanced helmet certifications available for auto racing helmets, and it is often associated with top-tier motorsport categories like Formula 1. It's important to note that the FIA 8860-2018 helmets offer a high level of protection and their use is mandatory in many racing series. Drivers should always check the regulations of the racing series they intend to participate in to ensure compliance with helmet certification standards.
Can I wear glasses with my Stilo WRC Venti Zero Carbon Fiber helmet? Most helmets have provisions for wearing glasses or goggles, but check the design to be sure. Most manufacturers feature helmet models with wider eye ports to better accommodate eye glasses.
Are carbon fiber helmets better? Carbon fiber helmets are lightweight and strong, a top choice for racers. But remember, certification matters most.
Can I use a used helmet for racing? It's best to buy a new helmet. Used helmets may have unseen damage or be out of date on safety standards.
Can I buy replacement parts for my Stilo WRC Venti Zero Carbon Fiber helmet, like visors or padding? Many manufacturers offer replacement parts, including visors and padding, to extend your helmet's lifespan.
How can I prevent helmet fogging during races? Anti-fog sprays and inserts are available to help keep your visor clear during races.
What's the importance of proper helmet ventilation? Proper ventilation helps keep you cool and comfortable during races, reducing the risk of heat exhaustion.
How do I store my Stilo WRC Venti Zero Carbon Fiber helmet between races? Keep it in a cool, dry place away from direct sunlight and chemicals in a bag designed to store your auto racing helmet, like the Discovery Parts Evo Helmet Bag.
Where can I buy a certified racing helmet? You should only buy from a professional authorized dealer who has sold thousands of helmets. You can find all the best brands at Discovery Parts online at www.discoveryparts.com or visit our retail store at Atlanta Motorsports park or at one of the hundreds of race and track day events we attend and support.
Remember, safety should always come first in auto racing. Choose a certified helmet that meets the necessary standards to protect yourself on the track.
We take immense pride in offering a wide selection of Stilo auto racing helmets, designed to meet the demands of professional racers and motorsports enthusiasts alike. Stilo has been at the forefront of helmet innovation and safety for decades, earning a reputation as a top-tier brand in the racing world.
Key Features of Stilo Racing Helmets:
Unparalleled Safety: Stilo racing helmets are engineered to the highest safety standards, including certifications like Snell and DOT approval, ensuring your head is well-protected in high-speed racing conditions.
Premium Materials: Crafted with precision, Stilo helmets feature carbon fiber construction, making them lightweight yet incredibly strong for maximum protection.
Comfort and Fit: Stilo's commitment to comfort is evident in the design of their helmets. They offer a range of sizes, and many models have customizable padding to ensure a snug fit.
Aerodynamic Design: Stilo helmets are designed with aerodynamics in mind, reducing wind resistance and enhancing performance on the track.
Frequently Asked Questions About Stilo Helmets:
Where are Stilo helmets made? Stilo helmets are proudly manufactured in Italy, maintaining the highest quality standards.
Is Stilo a good helmet brand? Yes, Stilo is renowned for its commitment to safety, innovation, and performance, making it a trusted choice among professional racers and enthusiasts.
Are Stilo helmets Snell approved? Yes, many Stilo helmets are Snell approved, meeting rigorous safety standards.
Are Stilo helmets FIA approved? Absolutely, several Stilo helmets are FIA 8860-2018 certified, ensuring they meet the most stringent safety requirements.
Do Stilo helmets run small? Stilo offers a variety of sizes and often provides sizing charts to help you choose the right fit. It's important to measure your head and refer to their guidelines for a proper fit.
For racers who demand the best in safety and performance, Stilo auto racing helmets are the ultimate choice. Explore our extensive collection to find the perfect helmet for your racing needs.
Stilo Racing Helmets: Stilo Racing Helmets are renowned for their exceptional quality and safety features. With a wide range of models to choose from, you can find the perfect Stilo Racing Helmet to suit your racing needs.
Stilo Racing Helmet: Each Stilo Racing Helmet is a product of meticulous craftsmanship and cutting-edge technology. When you wear a Stilo Racing Helmet, you're choosing a helmet that prioritizes your safety and performance on the track.
Stilo Race Helmets: Stilo Race Helmets come in various styles and designs to cater to different types of motorsports. Whether you're into karting, open-wheel racing, or stock car racing, Stilo has race helmets tailored for your specific discipline.
Stilo Race Helmet: Your Stilo Race Helmet is more than just protective gear; it's a crucial part of your racing ensemble. The aerodynamic design of a Stilo Race Helmet helps reduce wind resistance, giving you a competitive edge.
Stilo Helmet: A Stilo Helmet is a symbol of trust in motorsports. Professional racers and amateurs alike rely on the comfort, safety, and durability that Bell Helmets provide during intense racing conditions.
Stilo Helmets: Stilo Helmets have a rich history of innovation and excellence. The extensive range of Stilo Helmets ensures that there's a model suitable for every racer, whether you're a seasoned pro or just starting in the sport.
Stilo Carbon Fiber Helmet: Stilo Carbon Fiber Helmets combine the lightweight properties of carbon fiber with advanced safety features. These helmets are a top choice for racers seeking the ultimate in protection without sacrificing comfort.
Race Car Helmet: A race car helmet is a fundamental piece of safety gear for any racer. Stilo's race car helmets are engineered to meet the rigorous demands of motorsports, ensuring you stay safe on the track.
Racing Helmet: Your racing helmet is your shield against potential accidents. Stilo Racing Helmets are designed to offer superior impact protection while maintaining optimal visibility and ventilation.
Racing Helmets: Racing helmets are a racer's best friend. Stilo Racing Helmets, with their reputation for quality and safety, are the go-to choice for many professionals and enthusiasts in the racing community.
Stilo Racing: Stilo Racing is synonymous with excellence in the motorsports industry. Their commitment to research, development, and testing has solidified their position as a leader in racing helmet technology.
Auto Racing Helmet: When it comes to auto racing, your helmet is your first line of defense. Stilo Auto Racing Helmets are engineered to withstand the rigors of high-speed racing, ensuring your head is protected.
Auto Racing Helmets: Auto racing helmets from Stilo are designed to provide optimal head protection while maintaining lightweight and aerodynamic qualities, allowing you to perform at your best.
Stilo S.r.l.
STILO WRC Venti Range Composite Helmet FIA 8859-SA2020
from $1,150.00
STILO Venti WRC Carbon Fiber Helmet - Uncompromising Safety and Performance
The new Stilo WRC Venti Range features lightweight construction using the smallest of three available shells for the smallest and lightest helmet available. Designed specifically for motorsport enthusiasts, the Stilo WRC Venti Range is built to withstand the demands of high-speed racing, ensuring optimal safety during intense driving scenarios.Stilo WRC Venti Range Helmet is 8859-SA2020 certified: This Stilo WRC Venti Range Helmet meets the highest safety standards set by those renowned organizations. It guarantees top-tier protection for professional and amateur racers alike.With its unique ventilation system, the Stilo WRC Venti Range offers superior airflow, keeping you cool and focused even during long races or under extreme conditions. Stilo WRC Venti Range Helmet's aerodynamic design reduces drag, allowing for enhanced performance and improved stability at high speeds, giving you a competitive edge on the track.The interior padding of the Stilo WRC Venti Range can be easily removed and cleaned, ensuring a fresh and comfortable fit for every race. Stilo WRC Venti Range Helmet is equipped with innovative noise-canceling features from the redesigned boom with all new geometry for maximum visibility and sound quality, this minimizes external distractions, allowing you to maintain focus and concentration on the track ahead. The Stilo WRC Venti Range features an all new aggressive design featuring an adjustable visor, providing optimal visibility and allowing you to customize your field of view for different driving conditions.The Stilo WRC Venti Range Helmet is a professional-grade helmet trusted by professionals, the Stilo WRC Venti Range is the pinnacle of safety and performance in motorsport, offering uncompromising quality for your racing needs.Invest in the Stilo WRC Venti Range Helmet today and experience unparalleled safety, comfort, and performance on the racetrack. Dominate every curve with confidence and stay ahead of the competition.The Stilo Venti WRC is the update of the legendary WRC helmet as worn by multiple rally champions. This helmet features many improvements most notably the innovative wireless (WL) communication system. The new wireless key available allows the driver and co-driver to continue to communicate even when outside of the car.The microphone boom shape has been improved to further deflect cabin noise, improving the communication clarity between co-driver and driver. The magnetic dynamic, noise-canceling microphone is adjustable to allow for optimum spacing from the mouth to reduce external noise. Noise attenuating ear muffs in the Stilo Venti WRC surround the speakers to hugely reduce external noise and improve the levels of comfort. The Stilo Venti WRC helmet's electronics is also compatible with traditional Stilo wired amplifiers or the new wireless amplifiers.
The Adjustable Peak of the Stilo Venti WRC helmet can be raised/lowered to give clear optimal visibility with low sun.
Supplied with factory fitted HANS Post anchors as standard.
Also Available with FIA 8860-2018 certification
How to Properly Measure your head for the perfect fitting Stilo WRC Venti helmet
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
The Stilo WRC Venti Range Composite helmet will ship with signature required for delivery.
STILO WRC VENTI COMPOSITE HELMET FREQUENTLY ASKED QUESTIONS (FAQ):
Remember that safety is paramount in auto racing, and choosing the right helmet and maintaining it properly is essential for your protection on the track. Always consult with the professionals at Discovery Parts and refer to the manufacturer's guidelines for specific questions about your racing helmet.
Why do I need a racing helmet?
Auto racing helmets are designed to protect drivers from head injuries and fire during high-speed races and crashes. They are a crucial safety component in motorsports.
How do I choose the right size helmet? You should measure your head's circumference using a flexible tape measure, then refer to the manufacturer's sizing chart to select the appropriate size helmet. Please review our blog posting on how to properly fit your new auto racing helmet from Discovery Parts.
What safety standards should I look for in a racing helmet? Look for helmets that meet safety standards like Snell and FIA depending on your racing discipline. These standards ensure the helmet's safety and quality. DOT helmets are designed for street use and not for racing and track use.
What's the difference between full-face and open-face, and helmets? Full-face helmets provide the most protection with a complete face shield, while open-face helmets cover the top and sides of the head.
Can I use a motorcycle helmet for auto racing? No, motorcycle helmets do not provide the same level of protection as auto racing helmets, as they are designed for different purposes. It's recommended to use a helmet specifically designed for auto racing which includes fire protection in addition to impact protection.
How often should I replace my auto racing helmet? Auto racing helmets should be replaced every 5-10 years, depending on the manufacturer's recommendations and usage. If the helmet is involved in a crash, it should be replaced immediately.
Are expensive racing helmets safer than budget ones? Safety standards dictate the minimum safety requirements, so even budget-friendly helmets can offer protection. However it’s important to consider how lower-priced helmets are meeting the required testing standards. More expensive helmets are lighter, smaller, are constructed of superior materials, and often come with additional features then less expensive helmets.
How do I maintain and clean my racing helmet? Follow the manufacturer's instructions for cleaning and maintenance. You should clean the exterior, interior and shield with the Molecule Helmet Care Kit.
Do I need to wear a balaclava under my racing helmet? Balaclavas are typically not required for Driver's Education events, however they make wearing a helmet much, much more comfortable. Balaclavas will provide fire protection (if fire rated), help keep your helmet lining clean and order free by absorbing the majority of sweat while using it, and additionally balaclavas make putting your helmet on and taking it off by protecting your ears and keeping from from folding over when you helmet is worn. Discovery Parts recommends balaclavas from Alpinestars, OMP, Sabelt, Sparco, and Stand21. If you are entering sanctioned auto racing events, balaclavas will be required for fire protection.
Is the SNELL SA Rating important? The Snell SA2020 certification is a safety standard established by the Snell Memorial Foundation for auto racing helmets. It sets the criteria and requirements that helmets must meet to be considered safe and suitable for use in motorsport events. Snell SA2020 certification is highly regarded in the motorsports industry and is often required or recommended by racing organizations and events. It signifies that a helmet has passed rigorous testing to provide maximum safety for drivers in various motorsport disciplines, including road racing, NASCAR, Formula 1, drag racing, and more. It's essential for drivers to check the specific safety standards required by the racing organizations they participate in to ensure compliance.
Is the FIA helmet certification important? Yes, FIA (Fédération Internationale de l'Automobile) certification is crucial for auto racing helmets, especially in the context of international motorsport events and many national and regional racing series in the USA. The FIA 8859-2015 standard is commonly associated with racing helmets used in various motorsport disciplines. Helmets certified to FIA 8859-2015 met the safety requirements set by the FIA and were widely accepted in many racing series
Which helmet certification is the most stringent and the hardest to meet? The FIA 8860-2018 certification is considered the most stringent and advanced helmet certifications available for auto racing helmets, and it is often associated with top-tier motorsport categories like Formula 1. It's important to note that the FIA 8860-2018 helmets offer a high level of protection and their use is mandatory in many racing series. Drivers should always check the regulations of the racing series they intend to participate in to ensure compliance with helmet certification standards.
Can I wear glasses with my helmet? Most helmets have provisions for wearing glasses or goggles, but check the design to be sure. Most manufacturers feature helmet models with wider eye ports to better accommodate eye glasses.
Are carbon fiber helmets better? Carbon fiber helmets are lightweight and strong, a top choice for racers. But remember, certification matters most.
Can I use a used helmet for racing? It's best to buy a new helmet. Used helmets may have unseen damage or be out of date on safety standards.
Can I buy replacement parts for my helmet, like visors or padding? Many manufacturers offer replacement parts, including visors and padding, to extend your helmet's lifespan.
How can I prevent helmet fogging during races? Anti-fog sprays and inserts are available to help keep your visor clear during races.
What's the importance of proper helmet ventilation? Proper ventilation helps keep you cool and comfortable during races, reducing the risk of heat exhaustion.
How do I store my helmet between races? Keep it in a cool, dry place away from direct sunlight and chemicals in a bag designed to store your auto racing helmet, like the Discovery Parts Evo Helmet Bag.
Where can I buy a certified racing helmet? You should only buy from a professional authorized dealer who has sold thousands of helmets. You can find all the best brands at Discovery Parts online at www.discoveryparts.com or visit our retail store at Atlanta Motorsports park or at one of the hundreds of race and track day events we attend and support.
Remember, safety should always come first in auto racing. Choose a certified helmet that meets the necessary standards to protect yourself on the track.
We take immense pride in offering a wide selection of Stilo auto racing helmets, designed to meet the demands of professional racers and motorsports enthusiasts alike. Stilo has been at the forefront of helmet innovation and safety for decades, earning a reputation as a top-tier brand in the racing world.
Key Features of Stilo Racing Helmets:
Unparalleled Safety: Stilo racing helmets are engineered to the highest safety standards, including certifications like Snell and DOT approval, ensuring your head is well-protected in high-speed racing conditions.
Premium Materials: Crafted with precision, Stilo helmets feature carbon fiber construction, making them lightweight yet incredibly strong for maximum protection.
Comfort and Fit: Stilo's commitment to comfort is evident in the design of their helmets. They offer a range of sizes, and many models have customizable padding to ensure a snug fit.
Aerodynamic Design: Stilo helmets are designed with aerodynamics in mind, reducing wind resistance and enhancing performance on the track.
Frequently Asked Questions About Stilo Helmets:
Where are Stilo helmets made? Stilo helmets are proudly manufactured in Italy, maintaining the highest quality standards.
Is Stilo a good helmet brand? Yes, Stilo is renowned for its commitment to safety, innovation, and performance, making it a trusted choice among professional racers and enthusiasts.
Are Stilo helmets Snell approved? Yes, many Stilo helmets are Snell approved, meeting rigorous safety standards.
Are Stilo helmets FIA approved? Absolutely, several Stilo helmets are FIA 8860-2018 certified, ensuring they meet the most stringent safety requirements.
Do Stilo helmets run small? Stilo offers a variety of sizes and often provides sizing charts to help you choose the right fit. It's important to measure your head and refer to their guidelines for a proper fit.
For racers who demand the best in safety and performance, Stilo auto racing helmets are the ultimate choice. Explore our extensive collection to find the perfect helmet for your racing needs.
Stilo Racing Helmets: Stilo Racing Helmets are renowned for their exceptional quality and safety features. With a wide range of models to choose from, you can find the perfect Stilo Racing Helmet to suit your racing needs.
Stilo Racing Helmet: Each Stilo Racing Helmet is a product of meticulous craftsmanship and cutting-edge technology. When you wear a Stilo Racing Helmet, you're choosing a helmet that prioritizes your safety and performance on the track.
Stilo Race Helmets: Stilo Race Helmets come in various styles and designs to cater to different types of motorsports. Whether you're into karting, open-wheel racing, or stock car racing, Stilo has race helmets tailored for your specific discipline.
Stilo Race Helmet: Your Stilo Race Helmet is more than just protective gear; it's a crucial part of your racing ensemble. The aerodynamic design of a Stilo Race Helmet helps reduce wind resistance, giving you a competitive edge.
Stilo Helmet: A Stilo Helmet is a symbol of trust in motorsports. Professional racers and amateurs alike rely on the comfort, safety, and durability that Bell Helmets provide during intense racing conditions.
Stilo Helmets: Stilo Helmets have a rich history of innovation and excellence. The extensive range of Stilo Helmets ensures that there's a model suitable for every racer, whether you're a seasoned pro or just starting in the sport.
Stilo Carbon Fiber Helmet: Stilo Carbon Fiber Helmets combine the lightweight properties of carbon fiber with advanced safety features. These helmets are a top choice for racers seeking the ultimate in protection without sacrificing comfort.
Race Car Helmet: A race car helmet is a fundamental piece of safety gear for any racer. Stilo's race car helmets are engineered to meet the rigorous demands of motorsports, ensuring you stay safe on the track.
Racing Helmet: Your racing helmet is your shield against potential accidents. Stilo Racing Helmets are designed to offer superior impact protection while maintaining optimal visibility and ventilation.
Racing Helmets: Racing helmets are a racer's best friend. Stilo Racing Helmets, with their reputation for quality and safety, are the go-to choice for many professionals and enthusiasts in the racing community.
Stilo Racing: Stilo Racing is synonymous with excellence in the motorsports industry. Their commitment to research, development, and testing has solidified their position as a leader in racing helmet technology.
Auto Racing Helmet: When it comes to auto racing, your helmet is your first line of defense. Stilo Auto Racing Helmets are engineered to withstand the rigors of high-speed racing, ensuring your head is protected.
Auto Racing Helmets: Auto racing helmets from Stilo are designed to provide optimal head protection while maintaining lightweight and aerodynamic qualities, allowing you to perform at your best.