New products

Sparco EVO Carbon Fiber Racing Seats As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with pre-preg aerospace grade carbon fiber, also known as dry carbon. The Sparco EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover). The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. EVO QRT TECHNOLOGY Ultralight pre-preg carbon fiber shell Excellent fitment into small vehicle cockpits Three shell sizes: Medium, Large, or XL Excellent ergonomics Fire-retardant fabric Special non-slip fabric FIA 8859-1999 approved SPARCO EVO RACE SEAT SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment: EVO Carbon – Medium (up to 34” waist) EVO L Carbon – Large (up to 36” waist) EVO XL Carbon– X-Large (38” waist) DIMENSIONS

Chillout Carbon Top Air for Stilo Helmets Designed for performance, the Chillout Carbon Fiber Top Air for Stilo directs air its rear intake barb and into small holes located on top of all ST5 and ST6 racing helmets. Constructed from ultra lightweight, incredibly resilient pre-impregnated dry carbon fiber, the front deflector improves vision by directing air towards the visor and away from the eyes. Air exits out the rear holes and from the bottom of the helmet, forcing out hot air and CO2 build-up. FEATURES Constructed from 1 mm dry 3K 2x2 twill weave carbon fiber Connects directly to the Maglock or FluidLogic Helmet air system Compatible with most Stilo helmets Comes in two sizes: small for helmets up to 59 cm, and large for helmets 60 cm and bigger Ultra lightweight and durable One piece carbon fiber construction, no glue or plastic used. Maglock & helmet not included. Shown on helmet for reference only.

Complete Front AP Racing Competition Endurance Brake Kit Subaru BRZ, Scion FR-S, or Toyota GT86/GR86 (2013+) Clears Gen 2 (2022 and up) 17- and 18-inch wheels without need for a spacer Features AP Racing CP8350 four-piston calipers 325mm x32 mm, 70 vane AP Racing two-piece floating rotors Saves approximately 10 lbs. of unsprung weight from nose vs. OEM brakes Every component is designed to resist the heat of extended racing stints Pistons are sized to allow for seamless integration with OEM master cylinder and ABS system Designed to work with OEM rear brakes Brake Pads That Fit These Calipers: Carbotech CTW7420 Ferodo FRP3097 D50 PFC 7751.xx.20

Complete AP Racing Front Brake Kit for Sprint Races For the Subaru BRZ & Toyota GR86 (2022+) Newly designed caliper brackets and rotors accommodate the 2022+ BRZ aluminum spindles (old Gen 1 kits will not fit the Gen 2 cars) Clears Gen 2 (2022 and up) 17- and 18-inch wheels without need for spacers Features AP Racing CP8350 four-piston fixed calipers 299mm x 32mm 60-vane AP Racing two-piece floating rotors Saves 20 lbs. of unsprung weight from the nose of vs. OEM brakes Every component is designed to resist the heat of extended lapping on the race track Pistons are sized to allow for seamless integration with the OEM master cylinder and ABS system Designed to work with OEM rear brakes

BELL Cover plate & FORCED AIR low profile nozzle for HP6/GT6 helmet   Kit consist of:1 Pcs FORCED LOW PROFILE NOZZLE (Clear)1 Pcs COVER PLATE2 Sets* SEAL KIT *Each SEAL KIT set contains 2 pieces of 20 x 80mm and 2 pieces of 20 x 120mm.

Porsche Motorsport Daytona III Officially Licensed Porsche Motorsport Gear STAND21 PORSCHE MOTORSPORT DAYTONA III SHOE FEATURES Premium suede leather for high quality and durability Reinforced stiffer heel Shock-absorbing heel Ergonomic and tailored-sole to offer the perfect feeling Extra velcro-fastening strap offers firm hold by lacing up to ankle FIA 8856-2018 EU sizes from 40 to 47

Stand21 Porsche Motorsport Air-S Speed Racing Shoe Officially Licensed Porsche Motorsport Gear The Stand21 Air-S Speed is, without exception, the lightest, most breathable and most comfortable racing shoe we've ever worn. The uppers are supple and breathable without sacrificing safety or durability. The stiff, oil-resistant soles are amazingly responsive, transmitting pedal feel at an incredible level. These are the first racing shoes we didn't want to take off immediately after a long stint -- they're that comfortable. The premium materials and superior craftsmanship are what we've come to expect from a brand like Stand21. The Porsche Motorsport embroidery is spectacular, a must-have for any Porsche enthusiast. STAND21 PORSCHE MOTORSPORT AIR-S SPEED SHOE FEATURES FIA 8856-2018 approved Stretchable and breathable fire-retardant fabric Reinforced stiffened heel box Curved sole around the heel EVA Micro-Cellular material shock-absorbing heel Ergonomic, anti-vibration ATV hydrocarbon resistant sole Edge-to-edge assembly avoiding stuck shoes Firm hold by lacing up to the ankle US sizes 9.0 to 13.0

Forgeline Wheels Motorsport Series991 Porsche GT3 Track Package FITMENT 991.1 Porsche GT3 (2014-2016) 991.2 Porsche GT3 (2018-2019) Discovery Parts Makes Buying Forgeline Wheels Easy Over the years, we've sold hundreds of Forgeline racing wheels for the Porsche GT3. We've taken all we know about the right offsets, wheel sizes, brake and fender clearance, ABS and Traction Control functionality, etc., and created a simple Track Package to take the guesswork out of upgrading to Forgelines. Forgeline Motorsport Series lightweight forged racing wheels are engineered for race cars and dedicated track duty. They are machined from individual billets of forged 6061-T6 aluminum and include features like I-beamed spokes, deeply-machined centers, and aggressive load ratings to be extremely strong, stiff, and lightweight. Simply choose your wheel style and finish (standard or premium), and we'll get your Forgeline Motorsport wheels started.1 It's that easy! Forgeline Motorsports Series Center Lock wheels are engineered exclusively for Porsche center lock applications like the 991 GT3. Of course, if you prefer a wheel style that's not listed or you have any questions at all, talk to one of our Forgeline specialists at (888) 748-7223. They can answer any questions you have! Included in the GT3 Track Package Two front and two rear Forgeline Motorsports Series Porsche center lock wheels finished in any standard powder coat color with a knurled bead for maximum tire grip. You can upgrade to a premium finish and truly personalize your Forgeline Track Package. FORGELINE GE1R FOR PORSCHE GT3 (991) The eight-spoke center-locking Forgeline GE1R represents the absolute latest in advanced wheel technology, including one-piece forged monoblock construction, motorsport engineered design, and I-beamed spokes and spans. It combines head-turning good looks with race-ready strength and durability. Designed for the 991 GT3, the Forgeline GE1R is a fully-forged one-piece monoblock wheel that's 30% stiffer than Forgeline's popular GS1R racing wheel. The I-beamed design minimizing wheel deflection under load for incredibly precise feedback and control, while the concave eight-spoke design of the GE1R offers generous caliper clearance for large racing-brake fitments. Forgeline's computer-simulated FEA design process yields a wheel that is very lightweight and extremely stiff, with excellent fatigue strength. FORGELINE GS1R FOR PORSCHE GT3 (991) Originally designed for professional racing teams competing in the IMSA Continental Tire SportsCar Challenge Grand Sport (GS) class, the Forgeline GS1R combines the latest in advanced wheel technology, including one piece forged monoblock construction, with motorsport-engineered design and I-beamed spokes. This result is a wheel is fully engineered to withstand the rigors of top-level endurance racing. With a 2100-lbs. street tire load rating and exceptional deflection stiffness, the GS1R remains incredibly lightweight. Made from the same forgings and similar design as Forgeline's legendary GA1R wheel, the GS1R employs a new chamfered outer lip with fewer sharp edges for easier handling. FORGELINE NW105 FOR PORSCHE GT3 (991) The Forgeline NW105 is a one-piece forged monoblock wheel designed specifically for the Porsche 992 GT3 RS. The NW105 combines cutting-edge engineering and sleek aesthetics to enhance the overall performance and appearance of the GT3RS. A key aspect of the Forgeline NW105 is its bold, seven-spoke layout with tapered angular spokes strategically designed to optimize airflow and enhance brake cooling. FORGELINE VX1R FOR PORSCHE GT3 (991) With the striking good looks of Forgeline's popular VX1 street wheel, but with a load rating suitable for dedicated track duty, the VX1R was engineered for beauty and braun! It is a full track-ready competition wheel equal in strength to Forgeline's famous GA1R and GS1R Motorsports Series wheels. The VX1R features a sharp Y-spoke design with long spokes that flow into the center lock, striking sharp angles, a deep concave profile, and a chamfered outer edge. Beyond just beautiful style, the VX1R is engineered to allow plenty of room for caliper clearance and extreme brake fitment. And the one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is lightweight, stiff, and has excellent fatigue strength. Colors and Finishes Available for Forgeline Wheels Standard finishes for Forgeline Wheels include all of the most popular wheel colors in a durable powder coat finish. The Premium finishes include several machined or brushed finishes that can be combined with clear or tinted-clear powder coats for a truly amazing appearance. Forgeline is well-known for the flawless finish and machining details of their racing wheels. NOTES 1 Forgeline Motorsport Series wheels are custom made-to-order with lead times of three to five weeks. Discovery Parts is the only dealer in the country with inventory on hand of common Porsche fitments, designs, and colors for immediate shipping. Check with us today to see if we have what you are looking for in stock.2 Discovery Parts carefully selects tire compounds and sizes to maximize performance and grip while maintaining full functioning of your ABS and TC systems. Not all tires are available in all wheel sizes.

AiM Sports SmartyCam3 Corsa Introducing the upgraded SmartyCam3 Corsa, the newest iteration of the SmartyCam HD. This enhanced version takes the well-known design to new heights, featuring an improved Global Shutter and the ability to capture video at up to 60 frames per second. Unlike conventional action cameras that cater to various extreme activities like skydiving or riding monstrous waves, the SmartyCam3 Corsa is meticulously crafted by dedicated motorsports enthusiasts who live and breathe the racetrack. Its narrow angle lens is specifically tailored for seamless mounting in sedans and sports cars, neatly fitting within the A-pillars for optimal placement. LOADED WITH THE LATEST FEATURES Built-In ECU Bridge: AiM's SmartyCam engineers loaded the AiM SmartyCam3 Corsa with features racers have requested for years, like a built-in ECU bridge. If you have a factory race car, BMW M4 GT4, Porsche Clubsport, GT3 Cup or Aston Martin Vantage GT4, you can now use your AiM SmartyCam Corsa stand alone and piggyback your ECU inputs. No external modules or additional wiring needed. Simple, non-invasive perfection. Automatic On/Off: AiM SmartyCam3 Corsa can be switched on/off automatically by the dash/logger it is connected to: simply decide after what period of non-activity the camera will have to switch-off. Both operations can also be carried out using the front facing buttons also, if you prefer. Recording can also be started/stopped automatically or via keyboard: the camera will start recording when the speed or RPM threshold is exceeded. You simply decide how long after dropping below the selected threshold the video will automatically stop. DESIGNED FOR A BRUTAL RACING ENVIRONMENT Straight Cut Dog Box/Solid Motor Mounts/Engine HarmonicsEngine rumble causes vibrations, which are not a good thing for video recording. Never again will you experience that seasick "wave effect" you get when watching videos recorded by a generic camera, when the car rolls at 7000 RPM. The AiM SmartyCam3 Corsa has been designed for that environment and for those vibrations. "Wave effect" is just a memory. Generic action cameras are designed to record videos in many different situations, such as skiing or surfing, but in motorsports they tend to record misleading videos. Those cameras straighten out the view ahead: when on track, the corners simply disappear. So, when you wish to check your track performance, those videos are useless, because the images are distorted. Being a camera dedicated to motorsports, your AiM SmartyCam3 Corsa features lenses specifically designed to avoid distortion. The AiM SmartyCam3 Corsa is available in one of two fields-of-view: 67° or 84°. REAL-TIME DATA OVERLAY With no driver input, the AiM SmartyCam3 Corsa will automatically overlay on your videos all the data you need: speed, RPM, lap number, gear shifts and much more. Simply choose the data and the graphic layout you prefer in the huge selection of overlays available. What Kind of Data? AiM SmartyCam3 Corsa overlays data from different sources on the videos themselves. From GPS: track map and vehicle position, as well as speed, lap and split times. From AiM data-logger/ECU: RPM, throttle, engaged gear, acceleration, temperatures, pressures and in the presence of additional sensors, also their values. All this info will be overlayed on videos in each single point of the track. SMARTY MANAGER 3 SOFTWARE With SmartyManager 3, AiM SmartyCam3 Corsa dedicated software, you can add your logo and the track map on videos. The wide choice of graphic objects you can select allows you to choose from a list of pre-determined sets with the same layout or to choose single objects from different sets. Now, your videos will be truly “yours” in all details, from data to their graphic layouts. Video format H.264 1,920x1,080 pixels @ 60 fps Display resolution 128x128 pixels Lens Low distortion camera lens CMOS Sensor Global shutter Field of view 67° or 84° Internal battery Rechargeable lithium battery External power 9-15 V Supported MicroSD Card (not included) Up to 2 TB Connectors 3 Binder 712 female connectors + 1 USB-C Usage temperatures -10°C/+50°C Auto Power ON Yes Auto Power OFF Yes Auto Start/Stop Recording Yes Body Coated aluminum Dimensions 102.2 x 63 x 46.5 mm Weight 280 g, battery included Waterproof IP65

Red Line Power Steering Fluid  From Spec Iron to TA1 to GT1, Red Line Power steering fluid has less thermal expansion and foaming than any other racing power steering fluid we have raced with. A common problem for a NASA Spec Iron Mustang is the high RPM the power steering pump sees. Normal fluil foams, expands and starts to blow onto the header. Red Line Power Steering Fluid has cured this problem in our Spec Iron cars and is a great upgrade to any hi-performance or track car.  Red Line Power Steering Fluid Details: Manufacturer: Red Line Oil Manufacturer part number: 30404 Size: Quart Improved wear protection, resists thermal breakdown, evaporation and foaming Provides continued high pump output, suitable for most power steering units Lightweight fluid avoids power loss 50% greater high-temp viscosity and 1/5 of the high-temp evaporation Greater heat resistance helps to prevent boil-over Helps to prevent high-temp steering fade and difficult effort steering at low temps Compatible with petroleum's and synthetics 1/4 of the oxidation of petroleum power steering fluids Helps prevent leakage and squealing Red Line Power Steering Fluid Compatibility: Red Line Power Steering Fluid satisfies the service fill requirements of most auto manufacturers and can be used where the manufacturer calls for any automatic transmission fluid, including the following: Dexron, Dexron II, II-E, or Dexron III Ford Type-F, Mercon M2C138-CJ such as required by BMW, Ford, Infiniti, Jaguar, Lexus, Mazda, Mitsubishi, Nissan, Mercedes-Benz, Porsche, SAAB, Subaru, Toyota, VW, Volvo and many others. Red Line Power Steering fluid also satisfies power steering units requiring GM PN 1050017 or 1052884 (Spec Number 9985010), Chrysler Spec Number 5931, MS-11655 and MS-90030, and Ford Spec Number M2C33-F. It also satisfies the hydraulic specifications of Denison HF-O, Vickers vane pumps and Sundstrand piston pumps. Suitable replacement for Eaton Supercharger fluid, GM pt# 12345982, AC Delco pt# 10-4041, Ford pt# XL-4, Ford ESE-M99C115-A, Toyota pt# 08885-80108.

CMS Performance Bolt In Roll Bar For BMW G87 M2 (2023+) We now have an option for cars equipped with the factory sunroof THE PREMIUM ROLL BAR FOR THE INCREDIBLE NEW BMW M2 Introducing the CMS Performance Roll Bar for the all-new, amazing G87 M2!  The powerful new M2 promises to be a hoot on the track-day circuit, so we got to work right away engineering a bolt-in roll bar that lives up to Competition Motorsport's tradition of building the strongest, safest, most beautifully constructed roll bars on the market. The new CMS Performance roll bar for the G87 delivers on all points! AN M2 ROLL BAR ENGINEERED FOR SAFETY AND PERFORMANCE Conceived from the ground up with a premium on safety and structural rigidity, the exceptional design of the CMS Performance M2 roll bar integrates perfectly with the M2's luxury/sport interior. CMS uses advanced Docol R8 Advanced High-Strength Steel tubing throughout our roll bars, giving you unequalled tensile strength and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used in other bolt-in roll bars. It is superior in every way: resistance to deformation, weld strength, and energy dissipation. The one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the M2 chassis, forming the backbone of the CMS Performance roll bar. Rearward kicker supports are optimized for support in a roll-over event while maintaining an unobstructed rear view. The harness bar is specifically designed to locate racing harness shoulder straps at the proper angle (0° to -20°) to the driver's shoulders regardless of seat position. Click Here For Installation Instructions CUTTING-EDGE MATERIALS MEET AMERICAN MASTER CRAFTSMANSHIP The CMS Performance BMW M2 Roll Bar is designed to bolt directly to the M2 chassis strong points without the need for any modification of existing interior trim or use of backing plates. Adding a CMS custom designed rear seat delete gives the whole installation a clean, factory appearance. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched G87 M2 factory colors1. Or go with a custom technical color like the amazing Superchrome (check it out in the photos above!) We have access to over 5,000 powder coat colors, so if you need a color not on the list, just give us a call and we'll make sure your M2 roll bar has the look you like! A BEAUTIFUL BEAST OF AN M2 ROLL BAR! Our unwavering focus on using cutting-edge materials, unsurpassed design & construction, and premium fit & finish has taken CMS Performance roll bars to the top of the industry. The BMW G87 M2 roll bar is the latest addition to our growing catalog, bringing safety, integrity, and beauty to customers taking their new M2 to the track. CMS PERFORMANCE BMW G87 M2 ROLL BAR OPTIONS The optional CMS Performance Rear Seat Delete Kit is custom-designed for the G87 M2, giving your roll bar installation a factory-finished look. Add Schroth Profi II ASM or Sabelt Steel Series four-point harnesses give you increased on-track safety using your factory BMW seats. CMS Roll Bar Harness Collarshelp keep your harness shoulder straps located right where you want them. CMS PERFORMANCE BMW G87 M2 ROLL BAR DETAILS Materials: 1.75″ X .095" Docol R8 Advanced High Strength Steel throughout (stronger than 4130 CrMo) Construction: fully TIG welded one-piece main hoop and three-piece kickers ease installation while maintaining exceptional strength Precision-cut mounting plates Designed, manufactured, and finished in the USA CNC machined high-strength-steel interlocking joints Allows full seat travel with virtually any seat All USA-sourced Grade 8 hardware included Detailed installation instructions Installation requires removal of the factory rear seats. This product is intended for off-road race track use only. 1 Note: CMS Performance powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car.

Forgeline Motorsport Series 992 GT3 RS Track Package DISCOVERY PARTS MAKES BUYING FORGELINE WHEELS EASY Over the years, we've sold hundreds of Forgeline wheels for the various iterations of the Porsche GT3 RS. We took all of that accumulated experience (with offsets, wheel sizes, brake and fender clearance, ABS functionality, etc.) and created this Track Package to take the guesswork out of upgrading to Forgeline Motorsport Series wheels. Just choose your wheel style and finish (standard or premium), add tires and TPMS if you want, and we'll get your Forgeline Motorsport Series wheels rolling!1 If you have a Forgeline wheel in mind that's not listed, or if you just have questions, call us at (888) 748-7223 and talk to a Discovery Parts Forgeline expert. NOTE: 19" front wheels will require trimming of brake cooling ducts for additional clearance. FORGELINE MOTORSPORT SERIES Motorsport Series lightweight forged racing wheels are engineered for race cars, and they function especially well as dedicated track-duty wheels for your 992 GT3 RS. Each wheel is CNC-machined from an individual forged 6061-T6 aluminum billet, incorporating features like I-beamed spokes, chamfered edges, and deeply-machined centers to make them strong, light, and beautiful. Forgeline Motorsport Series wheels boast high load ratings, a testament to their extreme strength, deflection stiffness, and durability. Forgeline Center Lock wheels are engineered exclusively for Porsche center lock applications like the 992 GT3 RS. They can also be equipped with a special center lock to accommodate Porsche Cup Car and RSR hub assemblies. WHAT'S INCLUDED The package includes two front and two rear Forgeline Motorsport Series wheels for Porsche center lock, finished in any standard powder coat color. Knurled tire beads are included to prevent the tire rotating around the rim. (Tires get sticky; it happens!) Choose from 19" wheels all-around, a typical racing set-up; 19" fronts & 20" rears, giving you more tire choices and more performance than OEM sizes; or, 20" fronts & 21" rears, the OEM size if you want a second set of wheels that mirror the stock Porsche set-up. PREMIUM FINISHES AVAILABLE Several machined and brushed finishes are available, combined with clear or tinted-clear powder coats for a truly amazing appearance. If you want your Forgelines in a Premium Finish, please give us a call at (888) 748-7223. FORGELINE GE1R FOR PORSCHE GT3RS (992) The eight-spoke center-locking Forgeline GE1R represents the absolute latest in advanced wheel technology, including one-piece forged monoblock construction, motorsport engineered design, and I-beamed spokes and spans. It combines head-turning good looks with race-ready strength and durability. Forgeline's computer-simulated FEA design process yields a wheel that is very lightweight and extremely stiff, with excellent fatigue strength. FORGELINE GS1R FOR PORSCHE GT3RS (992) Originally designed for professional racing teams competing in the IMSA Continental Tire SportsCar Challenge Grand Sport (GS) class, the Forgeline GS1R combines the latest in advanced wheel technology, including one piece forged monoblock construction, with motorsport-engineered design and I-beamed spokes. This result is a wheel fully engineered to withstand the rigors of top-level endurance racing. With a 2100-lb. street tire load rating and exceptional deflection stiffness, the GS1R is still incredibly lightweight. FORGELINE NW105 FOR PORSCHE GT3RS (992) The Forgeline NW105 is a one-piece forged monoblock wheel designed specifically for the Porsche 992 GT3 RS. The NW105 combines cutting-edge engineering and sleek aesthetics to enhance the overall performance and appearance of the GT3RS. A key aspect is its bold, seven-spoke layout with tapered angular spokes strategically designed to optimize airflow and enhance brake cooling. FORGELINE SS1R FOR PORSCHE GT3RS (992) Forgeline's SS1R is derived directly from their SS1R-GT, a wheel engineered specifically for ultra-competitive IMSA and WEC GT3 racing, the Forgeline one-piece forged monoblock SS1R wheel is lightweight, strong, and incredibly stiff. The center-lock SS1R features a split six-spoke design, I-beamed spokes, a tapered outer edge, and aggressive machining details making it an ideal choice for the GT3 RS. NOTES: 1  Forgeline Motorsport Series wheels are typically custom made-to-order with typical lead times of four to eight weeks. However, we carry inventory of common Porsche fitments for immediate shipping, so your lead time could be much shorter.

Stilo ST6 FN ABP Helmet Shield Compatible only with Stilo ST6 FN FIA 8860-2018 and FIA 8859-2024 ABP helmets. Stilo offers a wide variety of shield colors and tint options, covering all racing conditions, for the Stilo ST6 FN FIA 8860-2018 ABP and FIA 8859-2024 helmets. These shields are made to fit your Stilo ST6 FN ABP helmet perfectly. Since 2019, the most stringent FIA 8860-2018 ABP (Advanced Ballistic Protection) helmet standard has been in effect for Formula 1. This latest standard builds frontal penetration protection into the helmet shell. The New FIA standard drove Stilo engineers to design and develop the Stilo ST6 FN helmet, along with this new shield design. While looking very similar to the standard Stilo ST6 shield, there is a slight shape difference and overall height difference. Stilo ST6 FN FIA 8860-2018 ABP FIA 8859-2024 Helmet Shield Details: Manufacturer: Stilo Qty in kit: one (1) shield Shield stocking bag included Fits Stilo ST5 FN FIA8860-2018 ABP and 8859-2024helmets Does not fit any other Stilo helmets ABP is an acronym for "Advanced Ballistic Protection" in the latest FIA standard

Stilo ST5 Carbon Peak Visors Introducing the Stilo ST5 8860 Carbon Peak, the perfect accessory to enhance your racing experience. Designed as an optional extra for FIA8860 ST5 helmets, this peak is FIA approved and offers both style and functionality on the track.  Similar to the bill of a ball cap, the ST5 Peak Visor by Stilo is effective at blocking the sunlight from your eyes. The peak visor can be adjusted to the angle of the sun throughout the day. Fitted for the SA2020 Stilo ST5 models, the ST5 peak is the perfect visor for keeping the sun out of your eyes.    Stilo ST5 Peak Visors Details: Manufacturer: Stilo Fits Stilo ST5: Yes Stilo SKU YA0862 Gloss Carbon Fiber (FIA 8859 weave) Stilo SKU YA0863 Gloss Carbon Fiber (FIA 8860 weave)

Garmin Catalyst Dash Cam Universal Suction Cup Mount To mount the camera for the award winning Garmin Catalyst to a race car, we prefer the Garmin Catalyst Camera Suction Cup Mounting Kit. It includes a Ball Joint mount with a suction cup base for quickly mounting your Garmin Catalyst Remote Camera. Garmin Catalyst Suction Cup Mounting Kit Details: Manufacturer: Garmin Manufacturer Part Number: 010-12530-25 Fits Garmin Catalyst Remote Camera: Yes We have many racers that also take their Garmin Catalyst from their track car to their DE car and the Garmin 010-12530-25 Suction Cup Mounting Kit is a track-worthy way of securing your Catalyst to your race car.