Paragon
Paragon 1.5" Air Hose (10ft)
$54.99
Paragon 1.5" Air Supply Hose (10 Feet)
Paragon’s 1.5” diameter x 10’ length Air Hose is designed to work with Paragon Viking Pro coolers, Viking Pro Bundles, and Air Blower Bundles. At 1.5” diameter, the Paragon Air Hose is small and flexible enough to route to your helmet without any necessary weight, giving you great head cooling while aiding in keeping fog off your visor.
Paragon 1.5" Air Supply Hose Details
Manufacturer: Paragon
Manufacturer part no.: 02-45000
Hose OD: 1.5"
Hose length: 10 feet
Weight: 2 lbs.
Stilo
Stilo ST5 Top Ram Air Vent Kit
$53.00
Stilo ST5 Top Ram Air Vent Kit
Force cool air into your helmet with the Stilo ST5 Top Ram Air Vent Kit. Most formula car, open-wheel, and karting drivers use these high-impact ABS clear plastic ram air vents to keep cool. Do they work? They work amazingly well. Jump out of the draft and feel a rush of cool air as you make that offline, last-corner pass.
STILO ST5 TOP RAM AIR VENT KIT DETAILS
Manufacturer: Stilo
Manufacturer part number: YA0822
Qty in kit: two (sold as a pair)
Material: high-impact plastic
Attaches how: 3M VHB double-sided tape
Fits all Stilo ST5 helmets
Does not fit Stilo ST4 helmets; use Stilo YA0620 ST4 Ram Air Intake Kit
For those customers in open-cockpit cars, some additional aerodynamics may be desired. We offer a top-air vent to help move cooler air into the helmet, a rear spoiler for stability and slight downforce, and a vent block-off kit to allow for more control of the airflow inside the helmet.
All pieces are made of clear plastic, and easily adhere with pre-installed double-sided adhesive tape.
Stilo
Stilo ST5 Front Spoiler Kit
$53.00
Stilo ST5 Front Spoiler Kit
For Open Cockpit Racers, The Stilo ST5 Front Spoiler stabilizes your helmet and stops buffeting and lifting at high speeds. Used in WKA kart racing to compensate for the extreme upright seats some kart racers have.
For those customers in open cockpit cars, some additional aerodynamics may be desired by the driver. We offer a front spoiler to help split air around the helmet. No more helmet lifting and instability under the highest speeds in a car with questionable driver aero.
All pieces are made of clear plastic, and adhere with double-sided adhesive tape.
Stilo ST5 Front Spoiler Kit Details:
Manufacturer: Stilo
Manufacturer part number: YA0823
Reduce Helmet Buffeting
Removable
Fits All Stilo ST5 Models
Can be painted
Alpinestars
Alpinestars Race v4 Nomex Socks
$52.95
Alpinestars Race v4 Nomex Socks
Alpinestars Race v4 Socks are lightweight, durable and ergonomically designed to meet the demands of the world top drivers. Certified to FIA homologation standards, these socks offer excellent protection from heat transfer and flat seams for long-lasting comfort.
ALPINESTARS RACE V4 NOMEX SOCK PROTECTION
Certified to the new FIA 8856-2018 homologation standard.
Roux Helmets
Roux Peak Visor White Fits Roux R-1 Helmets
$50.00
Roux Peak Visor White Fits Roux R-1 Helmets
Analogous to the brim of a hat, peak visors are designed to keep the sun out of your eyes. Roux peak visors will fit your your Roux R-1 Helmet perfectly.
Roux Peak Visor White, Fits Roux R-1 Helmets Details:
Manufacturer: Roux
Manufacturer part number: RXHS05-15G00
Color: Gloss White
Roux hardware kit ROU-RXHS07-15D is required to install this peak visor
Roux Helmets
Roux Peak Visor Silver Fits Roux R-1 Helmets
$50.00
Roux Peak Visor Silver Fits Roux R-1 Helmets
Analogous to the brim of a hat, peak visors are designed to keep the sun out of your eyes. Roux peak visors will fit your your Roux R-1 Helmet perfectly.
Roux Peak Visor Silver, Fits Roux R-1 Helmets Details:
Manufacturer: Roux
Manufacturer part number: RXHS05-15444
Color: Silver
Roux hardware kit ROU-RXHS07-15D is required to install this peak visor
[img-6519-left-large_default]
Rental
Daily Rental of HANS Device at AMP
from $50.00
Rent An Up-To-Date HANS Device Right At AMP!
Discovery Parts store in the AMP paddock carries a full complement of HANS devices to make sure every driver is safe out on the race track.
You can rent a HANS device for up to four days. Your rental is due back to Discovery Parts by 5pm on the final day of your rental.
Rental
Daily Rental of One Piece Race Suit at AMP
from $50.00
No Fire Suit? No Problem, We'll Rent You One!
Rent a one-piece, multi-layer SFI rated fire suit at the Discovery Parts store right in the Atlanta Motorsports Park paddock. Clean, comfortable, and professionally-maintained, our rental suits will keep you safe while you're out on the AMP race track.
Stilo
Stilo ST5 Side Air Kit
$50.00
Stilo ST5 Side Air Kit
Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone.
This side air kit allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet.
MUST BE USED IN CONJUCTION WITH SIDE AIR ADAPTER HOSE YA0639.
Bell
BELL Cover plate & FORCED AIR low profile nozzle for HP6/GT6 helmet
$49.95
BELL Cover plate & FORCED AIR low profile nozzle for HP6/GT6 helmet
Kit consist of:1 Pcs FORCED LOW PROFILE NOZZLE (Clear)1 Pcs COVER PLATE2 Sets* SEAL KIT
*Each SEAL KIT set contains 2 pieces of 20 x 80mm and 2 pieces of 20 x 120mm.
Stilo
Stilo ST5 Side Air Adapter Hose
$49.95
Stilo ST5 Side Air Adapter Hose
Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone.
This adapter hose allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet.
MUST BE USED IN CONJUCTION WITH SIDE AIR KIT YA0653.
Roux Helmets
Roux Top Forced Air Adapter
$49.00
Roux Top Forced Air Adapter
Now you can easily attach your helmet blower to your Roux Helmet with the Roux Helmet Top Forced Air Adapter. Easily install your helmet top air adapter with the enclosed mini-screws and enjoy a shield that never fogs and keeps your head even cooler. Roux top forced air adapter the lightweight and the prefect addition to your Roux helmet.
Roux Top Forced Air Adapter Details:
Manufacturer: Roux
Manufacturer part number: RXHI01-15888
Color: Clear
Screws included: Yes
Hose barb shape: Oval
[img-6514-left-large_default]
[img-6513-left-large_default]
Chillout Systems
Chillout Systems 3" Air Duct Plenum
$48.00
Chillout Systems 3" Air Duct Plenum
Chillout Motorsports 3" Air Duct Plenum connects to your Cooling System, efficiently increasing cooling performance whilst simultaneously reducing amp draw from your electrical system.
The plenum is designed to fit the intake side of your Quantum Cooler, allowing for much cooler air to be forced through the system via the 3" duct. A 200 CFM blower (Minimum) is required in conjunction with the plenum for the best performance.The 3" Air Duct Plenum attaches via the plenum holder found on the front of the Quantum Cooler systems (V2 and above), creating a seal to keep the cooler pressurized with the cool air. Forcing cool air through the system and out through the exhaust side of the cooler is the most efficient way to reach maximum cooling - no wasted cool air, and the cooling shirt system appreciates every bit of cool air it can get.INCLUDED WITH THE CHILLOUT 3" PLENUM
3" Air Duct Plenum
Rental
Daily Rental of SA2020 Helmet at AMP
from $47.95
Daily rental of a racing helmet at the Discovery Parts store right in the paddock at Atlanta Motorsports Park. Discovery Parts keeps a full selection of full-face and open-face SA2020 rental helmets, making it easy for every driver to stay safe on the race track.
Helmets pictured are for illustrative purposes. Your rental helmet will be similar, but may not be exact.
Price includes a new balaclava for use during your rental. The balaclava is yours to keep after the rental period.
Racing Optics
Stilo Perimeter Seal Tearoff ST5 Thick 4mil
$46.95
Stilo ST5 Thick 4mil Perimeter Seal Tearoff Pack qty 9 (3 Sleeves of 3)
Protect Your Stilo ST5 Helmet Shield from rocks, dirt, and debris with these 4 mil thick tearoffs. Measuring 4 mil thickness (the most popular thickness for open cockpit and harsh environment racers), it is intended for road racing and/or dirt track use. The perimeter seal system used in these tearoffs provides a tighter fit against the visor, blocking out dirt, dust, and water from getting between the visor and tearoff stack. This package of 4 mil tear-offs are in 3 stacks of 3 per package (9 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches.
Stilo 4 mil Perimeter Seal Tearoff Pack Quantity 9 (3 Sleeves of 3) Details:
Manufacturer: Stilo
Manufacturer part numbers: 3459CP
Thickness each: 4 mil
Gradient: Clear
Fits All Stilo ST5 Helmets: Yes
Fits All Stilo ST4F and Stilo ST4W Helmets: No
3 Stacks of 3 each
Note: This is the thicker of tearoffs (4 mil) for your Stilo ST5 series helmets. It is used primarily in Road Racing Open Cockpit or other harsh environment race tracks
Sparco
Sparco Martini T-Shirt Big Logo
from $45.00
Sparco Martini T-Shirt Big Logo
Bold Martini Racing style meets premium stretch comfort
The Sparco Martini T-Shirt Big Logo is your go-to for trackside cool and casual style. Featuring a clean tone-on-tone Martini Racing logo, it blends iconic motorsport heritage with lightweight comfort. Whether you're fueling up in the paddock or kicking back post-session, this tee says you're here to win — even if it's just best-dressed in the pit lane.
Sparco Martini Racing Big Logo T-Shirt Details
Authentic Martini Racing branding: The iconic tone-on-tone logo across the chest keeps it clean and subtle but unmistakably race-inspired.
Tailored fit with stretch: Made from 95% cotton and 5% elastane for a jersey stretch feel that hugs in all the right places without restricting movement.
Track-day ready comfort: Lightweight 170gr/m² fabric keeps you cool whether you're on pit duty or spectating under the sun.
Color options: Available in sharp white or classic navy to match your garage vibes or Martini Racing cap.
Size range + fit tip: Offered in XS through 3XL, but heads-up — these run small. We recommend going one size up for best fit.
Sparco Martini T-Shirt Big Logo FAQs
Does the Sparco Martini T-Shirt run true to size? No — this shirt runs smaller than standard sizing. We recommend ordering one size larger than your usual for a proper fit.
What material is the shirt made from? It’s made from a soft jersey stretch blend: 95% cotton and 5% elastane at 170gr/m², ideal for warm weather and mobility.
Is the logo printed or embroidered? The Martini Racing logo is tone-on-tone and screen-printed for a sleek, modern finish.
Can I wear this under a race suit? Absolutely. It’s thin, breathable, and stretchy enough to work as a base layer during pre-grid prep or on the drive home.
Rep the legend of Martini Racing every day with the Sparco Big Logo T-Shirt — the perfect fusion of race-day cred and off-track comfort.
