Cooling Accessories

FluidLogic Coaxial System (Forced Air) Forced-Air applications use our Maglock® Coaxial connector to provide air and water quickly and easily. The Pod & Coaxial kit is designed for users that have a pre-existing forced air setup for their vehicle and helmet. The Pod is the heart and brain of the Fluidlogic™ system that also connects to your IOS device via Bluetooth to allow the user to fully customize their hydration profile. Included with the Pod is the Microbutton used to visually communicate with the user and command the Fluidlogic™ system with the press of a button. All the necessary mounting, wiring and plumbing hardware is included to turn the existing fluid source into a smart hydration system with no helmet drilling or modifications. The Fluidlogic™ Pod paired with the Coaxial system allows forced air users to connect both air and water within the same Maglock® magnetic connection. The Coaxial kit includes everything needed to completely set up one helmet and one seat in the vehicle.

FluidLogic Flush 360 System (Non Forced Air) The Pod & Flush 360 Kit is designed for users that do not use forced air or simply chose not to build onto their existing forced air system. The kit comes with the Pod along with the Flush 360 assembly to allow the user to quickly connect/disconnect their hydration using the power of Maglock®.   The Flush 360 quickly and easily installs onto the helmet in minutes with no drilling or modifications required. The Flush 360 Kit comes with everything needed to connect the existing fluid source to set up one complete helmet and seat in the vehicle.

Chillout Systems Uber3 275 CFM Blower (3-Inch) Chillout Systems Uber3 blower fan is a hi-performance, ultra small, ultra lightweight blower with self-resetting overload protection. With 275 CFM of air flow coming from a scant 5.8A draw at 13.8VDC, the Uber3 is the highest performing blower in its class, with multiple applications. CHILLOUT SYSTEMS UBER3 275 CFM BLOWER DETAILS Manufacturer: Chillout Systems Manufacturer part number: B-250 CFM: 275 (can be configured to 295 CFM) Inlet pressure: -6.5 in. H2O Outlet pressure: +4.5 in. H2O Voltage: 13.8 VDC Amperage: 5.8 A Lead wire length: 8.5" Dimensions: 3.25"D x 5.25"L Duct fittings: 3.00"D x 1.00"L on each end Weight: 10.2 oz Overload protection: Trips @ 15A in 10 milliseconds or less; self-resets after 5 second delay The most common uses we have seen for the Uber3 are to assist in remote cooling of Chillout coolers, driver top and side air helmet air systems, and brake ducting when a small brake duct footprint is required.

Carbon TOP AIR APLLIQUÉ FOR STILO Designed for performance, the Chillout Carbon Fiber Top Air Aplliqué for Stilo directs air via the rear intake barb and through small holes located on all ST5 helmets.  Constructed from ultra light weight and incredibly resilient, pre-impregnated, dry carbon fiber, the front deflector improves vision by directing air towards the visor and away from the eyes. Old air flows out of the rear holes and from the bottom of the helmet, forcing out hot air and CO2 build-up.  Carbon TOP AIR APLLIQUÉ FOR STILO FEATURES Constructed from 1mm dry 3k 2x2 twill weave carbon fiber Connects directly to the Maglock or FluidLogic Helmet air system  Compatible with most Stilo helmets Ultra lightweight and durable  One piece carbon fiber construction, no glue or plastic used. 

Chillout Remote Control For AirCon Helmet Cooler **Designed for the AirCon Helmet Cooler System only** Featuring a 10-foot cord and color digital display, this dash-mountable Chillout Remote Control is designed to turn your AirCon Helmet Cooler on and off as well as adjust the temperature from anywhere in your vehicle. This is a must-have addition if you're mounting your Chillout AirCon System in an out-of-reach area of your vehicle like the trunk or rear seat area. CHILLOUT REMOTE CONTROL (AIRCON) DETAILS Manufacturer: Chillout Systems Manufacturer part no.: CO-RCAC1 Weight: 5 oz. Dimensions: 2.5"L x 1.5"W x 0.5"H Cord length: 10 feet REMOTE CONTROL INCLUDES Remote control unit 10 foot cord

Chillout Systems Pro/V3 Mountable Wired Remote Control Featuring a 10 ft. cord and color digital display, the dash-mountable Wired Remote Control is designed to turn your Chillout Quantum Pro/V3 on and off as well as adjust the temperature from anywhere in your vehicle. The compact design is 1.5 x 2.5 x 0.5 inches and weighs under 5 oz. This is a great addition if you are mounting your system in an out-of-reach area in your vehicle like the trunk or rear seat area. * This remote works with the Quantum Pro (any mfg date) and Quantum V3 (mfg date 5/1/21 or later).    

Chillout Systems Carbon Fiber Air Duct Plenum Forcing fresh air to your cooler is the most efficient way to increase cooling performance and reduce amp draw from your electrical system. This plenum fits perfectly to the intake side of your Quantum Cooler, allowing much cooler air to be forced through the system via any four-inch duct (cooler, ducting, and intake scoop not included). A minimum 150 CFM blower (sold separately) should be used in conjunction with the plenum in order to cool properly. This carbon fiber plenum attaches via automotive-grade adhesive tape, creating a firm seal to keep the cooler pressurized with incoming cool air. This forces cool air all the way through the system and back out the exhaust side of the cooler, the most efficient way to reach maximum cooling capacity. Coupling the Chillout Systems Air Duct Plenum with your Quantum Cooler ensures no cool air is wasted, maximizing the effectiveness of the system.  

Keep Your Stilo Helmet Ventilated With The Stilo Top Air 90 Degree Maglock Kit  The exclusive Stilo "Top Air System" for ST5 or ST6 helmets takes fresh air to the driver's head and is fitted with an outlet designed to work with a Maglock system. With the innovative 90 degree system you can now make quick air connection with your Stilo ST5. Does not come with a flow adjuster. Air enters in through four small ventilation holes molded into the top of every ST5 and ST6 helmet. Air fed into the Top Air is directed to the top of the head.  Old air flows out of the side holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Top Air 90 Degree Maglock System can be fitted to all Stilo ST5 and ST6 model helmets.  SKU: YA0892-90

Chillout Systems Carbon Fiber Air Duct Plenum Forcing fresh air to your cooler is the most efficient way to increase cooling performance and reduce amp draw from your electrical system. This plenum fits perfectly to the intake side of your Quantum Cooler, allowing much cooler air to be forced through the system via any three-inch duct (cooler, ducting, and intake scoop not included). A minimum Uber3 blower (sold separately) should be used in conjunction with the plenum in order to cool properly. This carbon fiber plenum attaches via automotive-grade adhesive tape, creating a firm seal to keep the cooler pressurized with incoming cool air. This forces cool air all the way through the system and back out the exhaust side of the cooler, the most efficient way to reach maximum cooling capacity. Coupling the Chillout Systems Air Duct Plenum with your Quantum Cooler ensures no cool air is wasted, maximizing the effectiveness of the system.  

Chillout Systems 4" Carbon Fiber Dual NACA Duct Ultra lightweight and wind tunnel tested, the Chillout 4" Carbon Fiber Dual NACA Duct provides over 55% more airflow than a standard 3" NACA duct. Used in conjunction with Chillout 4" Neoprene Air Duct Hose and a 4" plenum, the 4" Carbon Fiber Dual NACA Duct maximizes the cooling efficiency of your driver cooling system. WHY USE NACA DUCTS AT ALL? NACA ducts bring air into a vehicle with a minimal increase in drag. The purpose of a NACA duct is to increase the flow rate of air while not disturbing the boundary layer. When the cross-sectional flow area of the duct is increased, you decrease static pressure and make the duct into a vacuum cleaner, minus the drag effects of a traditional scoop. A NACA duct starts narrow then widens in a graceful arc to increase the cross-sectional area slowly, so exterior boundary air flow doesn’t separate to cause turbulence and drag. CHILLOUT SYSTEMS 4" CARBON FIBER DUAL NACA DUCT DETAILS Manufacturer: Chillout Systems Manufacturer Part Number: CO-NP-42 Material: carbon fiber Hose outlet diameter (each): 3.92" (100mm) O.D. Hose outlets: two

Keep Your Stilo Helmet Ventilated With The Stilo Top Air Kit For Maglock Systems Fresh air keeps you cool and keeps sweat from getting in your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This Top Air is designed to be used with a Maglock System. This unique cooling system feeds air from your car’s fresh air system to both the top of your head and to the front of your face, while at the same time helping keep the inside of your visor clear. This system integrates into the existing design of the ST5 & ST6 helmet and does not require any drilling of the shell or modifications to the internal EPS foam. There are six small ventilation holes molded into the top of every ST5 and ST6 helmet. Stilo's Top Air system fits over the center four holes and extends down the front of the helmet and just under the top of the visor. Air fed into the Top Air is directed both to the top of the head and down over the face. A small deflector just inside the visor area directs air towards the visor and away from the eyes. Old air flows out of the top side holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Top Air System can be fitted to all Stilo ST5 or ST6 model helmets. It comes in two sizes to best fit your helmet: SKU YA0893-S Non-Adjustable for helmets XS 54cm to L 59cm SKU YA0894-S Non-Adjustable for helmets L+ 60cm to 4XL 64cm      

Keep Your Stilo Helmet Ventilated With The Stilo Top Air Maglock Kit  The exclusive Stilo "Top Air System" for ST5 helmets takes fresh air to the driver's head and is fitted with an outlet designed to work with a Maglock system. With the new innovative Top Air outlet you can now make quick air connection with your Stilo ST5 & ST6. Does not come with a flow adjuster. Air enters in through four small ventilation holes molded into the top of every ST5 or ST6 helmet. Air fed into the Top Air is directed to the top of the head.  Old air flows out of the side holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Short Top Air Maglock System can be fitted to all Stilo ST5 or ST6 model helmets.    SKU: YA0892-S

Chillout Systems Insulated Coolant Y-Hose The Chillout Systems Insulated Coolant Y-Hose is made of insulated liquid-transfer tubes encased in an ultra-durable, tear-resistant fabric shield. The primary end of the hose is 10 feet long, branching off into dual 4-foot hose ends that enable two cooling garments to be connected to one driver cooling unit with 1/4" fittings. Hose too long for your set-up? It's easy to cut the hose to desired length and re-attach the end fittings. Chillout hoses comes with an extra supply of matching shrink wrap for a flawless, clean, and durable finish. CHILLOUT SYSTEMS INSULATED COOLANT Y-HOSE DETAILS Manufacturer: Chillout Systems Manufacturer part no.: HYA-1 Double-insulation: one layer protects hoses and insulation, the other keeps coolant cold Length: 14-feet overall Male connectors: four Female Dual-Prong connector: one Additional heat shrink tubing for custom sizing while maintaining a finished look Can be connected to other hoses including another Y-connector

FluidLogic Wave Hydration System The new WAVE of hydration is here! The Fluidlogic WAVE is a complete hydration system that keeps your drink of choice cold and secure for your entire ride. Magnetic nozzle dock ensures quick one handed hydration with the flick of the wrist.  FEATURES AND BENEFITS OF FLUIDLOGIC WAVE Kitchen grade stainless steel is roost and rust resistant.  Quick release bottle mount secures to any roll bar for convenient filling.  Available in 32oz and 64oz capacity for short and long rides  Keeps your drink cold for up to 8 hours  Keep your eyes on the road ahead with quick one-handed megentic operation  Stay hydrated outside your vehicle when parked at your favorite spot Dust resistant silicone bite valve prevents dust and sand from sticking to the bite-valve Insulated dairy-grade tubing keeps your drink cold in route to you     Wide mouth bottle opening makes it easy to add ice to keep your drink cold all day  FLUIDLOGIC WAVE HYDRATION SYSTEM INCLUDES 32oz or 64oz stainless steel bottle Roll bar quick release mount & hardware 7.5ft of Dairy grade insulated draw tube Magnetic draw hose dock Dust & drip resistant silicone bite valve Varying length straps for securing draw tube to roll bar

Paragon Guardian Water Y-Hose Set Paragon’s innovative Guardian Water Supply/Return Y-Hose Set is designed to simultaneously run cooling water to two separate cooling garments. At 8 feet in overall length, the Guardian Y-Hose is the ideal length to suit most applications, although each of the three "legs" can easily be shortened to customize fit. The Paragon Guardian Y-Hose is insulated to keep your cooling garments supplied with icy cold water from a Paragon Viking. Arctic Wolf, or Arctic Fox cooler. The supply side of the Paragon Guardian Water Supply Hose delivers cooling water to the tubing inlets of your garments, while the return side of the hose set returns water warmed by body heat back to the cooler to be re-chilled and recirculated. Foam insulation acts as a thermal barrier to properly maintain the temperature of the water being supplied to your cooling garments. Paragon Guardian male connectors at the cooler end of the hose set are designed for emergency release, allowing you to easily disconnect with a quick pull on the hose set or garment. Paragon Guardian Supply Y-Hose Details Manufacturer: Paragon Overall length: 8 feet (2.4 meters) "Y" length (each branch): 1.5 feet (0.5 meter) Weight: 2 lbs. (0.9 kg)

ChillOut Systems Dual Voltage AC Power Supply Enjoy your ChillOut Systems Quantum Cooler outside of the car! This ChillOut Systems AC power supply plugs into most standard 110-120V wall outlets to give you the same cooling comfort outside your car as you have on track. ChillOut Systems Dual Voltage AC Power Supply Details: Manufacturer: ChillOut Systems Manufacturer Part Number: PS-1 Input: 120V Output: ChillOut electrical connector Your ChillOut engine is very portable, thanks to the built in handle. By adding the ChillOut Systems AC Power Supply you now can not put the small and powerful ChillOut engine next to you as you relax in the pits. Powered by a standard US 120V wall outlet on one cable and the ChillOut connector on the other end, track side cooling out of the vehicle has never been easier.