AiM MXL to MXG, MXS, MXL2 Adapter Harness

For use when you upgrade from an AiM MXL Pista or Strada to the modern MXS, MXG, MXP or MXL2 dash. You could remove the MXL harness from the chassis and replace it with the supplied harness that comes with the MXS, MXG or MXL2 or use this adapter harness to make installation easy.

AiM AiM MXL to MXG, MXS, MXL2 Adapter Harness Details

• Manufacturer: AiM
• Manufacturer part number: V02573090
• Connector 1: 22 pin
• Connector 2: 37 pin
• 2 Speed inputs 2-4
• 3 CAN inputs
• CAN/K-line ECU wiring
• 12VDC+/-

This special harness has one 22-pin and one 37-pin Deutsch connector to plug into the back of the MXL 2 or MXG dash. The other end of the harness has female connectors designed to accept your current MXL wiring harness. You won't have to cut wires, re-run cables, or even unplug your sensors! Simply disconnect the two rectangular AMP connectors from the back of your MXL and plug them into this harness. Your lap timing receiver and anything plugged into the CAN port can be connected to the harness as well. This harness also provides connections for speed inputs 2-4, 3 CAN inputs, and CAN/K-line ECU wiring, for full access to all of the advanced features of the MXL 2 and MXG/MXS.

Not compatible with MXL Pro or MXL Pro05 wiring harnesses.

If you are unfamiliar with Bend Radius, Wikipedia saves us: Bend radius, which is measured to the inside curvature, is the minimum radius one can bend a pipe, tube, sheet, cable or hose without kinking it, damaging it, or shortening its life. The smaller the bend radius, the greater is the material flexibility (as the radius of curvature decreases, the curvature increases).