Clearance

Racetech RT4119 Racing Seat 2028 Expiry Building upon the successful 129-Series, the Racetech RT4119 offers the same ergonomic form and incredible features in a lighter and more affordable package. The RT4119 is used by many professional teams at both the national and international levels. There are four sizes available: Standard, Wide, Tall, and Wide & Tall. Customize your seat further by adding low-profile base cushions, or you can add side cushions for support in the thigh area. The 119-Series seats are compliant with FIA 8855-1999 standards. Racetech RT4119HRW Mounting: Racetech RTB1009M aluminum brackets (side mount to car floor) Optional: RTB2115B bracket + RTB2005C clamps (back mount to roll cage or roll bar) To comply with FIA 8855-1999, all RT4119 racing seats (except the RT4119HRW) must be back-mounted to the roll cage at shoulder level. Back-mounting can be achieved using parts RTB2115B and RTB2005C, see instructions here. Back-mounting improves seat strength and stability during an impact, increases driver feel and reduces driver fatigue. Check out this video for more great info. Racetech RT4119HRW Racing Seat Details: FIA 8855-1999 homologation Shell construction of Glass Reinforced Plastic (GRP) composite Shell weight from 16.8 lbs. (7.6 kg) Large harness guides Air ducting can be vented to the driver's lower back Back-mount compatible Racetech RT4119 Racing Seat Size Options: Standard (HRW) Tall (THR) Wide (WHR) Wide & Tall (WTHR)

Sparco EVO Performance Carbon Fiber Racing Seats 2029 Expiry   The Sparco Evo Performance Carbon Fiber Seat looks as good on the street and it does on the track.  Finished in soft and smooth leather with an alcantara center, this seat is at the Pinnacle of the Evo line.  As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover).  The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. SPARCO EVO RACE SEAT SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment:EVO CARBON – Medium (up to 34” waist)EVO L CARBON – Large (up to 36” waist)EVO XL CARBON – X-Large (38” waist) EVO QRT Racing Seat Technology Ultralight Pre-Preg Carbon Fiber shellExcellent fitment into small vehicle cockpits3 Sizes: Medium through XLExcellent ergonomicsLeather and Alcantara UpholsteryFIA 8859-1999 approved EVO Carbon Fiber Racing Seat Dimensions EVO Std Dimensions:   EVO L / XL Dimensions:

Sparco QRT-C Performance Carbon Fiber Racing Seat 2028 Expiry The Sparco QRT-C Performance Carbon seat represents the luxury evolution of the QRT-C race seat. The QRT-C Performance Carbon uses the same FIA approved light-weight all-carbon fiber race shell as the QRT-C race seat but is covered in Italian Leather and Alcantara. The QRT-C Performance Carbon is constructed from “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The seats are handstitched in the Sparco OEM factory in Torino Italy. The Sparco QRT-C Performance Carbon has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller cockpits. The QRT-C Performance can hold the driver during extreme lateral forces, but is also comfortable for long road trips. The QRT-C Performance Carbon seat is FIA Approved. Sparco QRT-C Performance Carbon Racing Seat Sizing Large – up to a 36” waist (pants size) WHAT IS  Sparco QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. Sparco QRT-C Performance Carbon Racing Seat Technology Ultralight Carbon Fiber Shell Excellent fitment into small cockpits Medium/Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved SPARCO QRT-C PERFORMANCE CARBON DIMENSIONS

Sparco EVO Performance Carbon Fiber Racing Seats 2028 Expiry   The Sparco Evo Performance Carbon Fiber Seat looks as good on the street and it does on the track.  Finished in soft and smooth leather with an alcantara center, this seat is at the Pinnacle of the Evo line.  As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover).  The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. SPARCO EVO RACE SEAT SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment:EVO CARBON – Medium (up to 34” waist)EVO L CARBON – Large (up to 36” waist)EVO XL CARBON – X-Large (38” waist) EVO QRT Racing Seat Technology Ultralight Pre-Preg Carbon Fiber shellExcellent fitment into small vehicle cockpits3 Sizes: Medium through XLExcellent ergonomicsLeather and Alcantara UpholsteryFIA 8859-1999 approved EVO Carbon Fiber Racing Seat Dimensions EVO Std Dimensions:   EVO L / XL Dimensions:

Sparco QRT-C Performance Carbon Fiber Racing Seat 2029 Expiry The Sparco QRT-C Performance Carbon seat represents the luxury evolution of the QRT-C race seat. The QRT-C Performance Carbon uses the same FIA approved light-weight all-carbon fiber race shell as the QRT-C race seat but is covered in Italian Leather and Alcantara. The QRT-C Performance Carbon is constructed from “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The seats are handstitched in the Sparco OEM factory in Torino Italy. The Sparco QRT-C Performance Carbon has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller cockpits. The QRT-C Performance can hold the driver during extreme lateral forces, but is also comfortable for long road trips. The QRT-C Performance Carbon seat is FIA Approved. Sparco QRT-C Performance Carbon Racing Seat Sizing Large – up to a 36” waist (pants size) WHAT IS  Sparco QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. Sparco QRT-C Performance Carbon Racing Seat Technology Ultralight Carbon Fiber Shell Excellent fitment into small cockpits Medium/Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved SPARCO QRT-C PERFORMANCE CARBON DIMENSIONS

Alpinestars Hypertech v2 Race Suit The Hypertech v2 is Alpinestars' top-of-the-line, super-lightweight and breathable two-layer Race suit. The Hypertech v2 race suit has an athletic fit, designed and developed for drivers wanting  professional-level racing suit performance. The Hypertech v2 race suit meets the much stricter requirements of the new FIA Standard 8856-2018 while still maintaining its incredibly light 265 g/m2 weight and premium material feel. The Hypertech v2 race suit outer shell is constructed from an aramidic Nomex anti-static material providing optimal heat- and flame-resistance despite the very light weight, while the new inner lining is an innovative aramidic knit that also meets the new FIA standard. The race suit incorporates thin, stretchable super-light panels developed exclusively for Alpinestars that maximize comfort and maneuverability, and also allow the suit to regulate body temperature. These F1-derived stretch panels are strategically placed at the elbow, lower back and sides, crotch and knees to give the driver excellent flexibility and freedom of movement in and out of the cockpit. ALPINESTARS HYPERTECH V2 RACE SUIT PROTECTION Certified to the latest FIA 8856-2018 homologation standard Includes laundry bag for convenience and to protect material fibers Nomex anti-static outer shell fabric offers exceptional heat and flame-resistant proprieties ALPINESTARS HYPERTECH V2 RACE SUIT TECHNOLOGY Super-lightweight and breathable two-layer suit incorporating thin stretchable panels for maximum comfort and effective regulation of body temperature Innovative soft lining material technology ensures breathability and comfort Strategically positioned Formula 1-derived stretch panels at lower back and sides, elbow, crotch and knees for enhanced flexibility in and out of the car Alpinestars fully-floating arm construction with stretchable knit fabric ensures minimal material resistance while driving Soft and thin wrist and ankle cuffs for maximum comfort and reduced weight Flat seam construction for reduced pressure points and improve strength Specially-designed soft collar incorporates details, knit fabric and secure hook-and-loop closures ALPINESTARS HYPERTECH V2 RACE SUIT DETAILS Alpinestars exclusive shoulder epaulette construction provides an effective feature for the extraction of the driver in the event of a crash Printed logos help maintain the suit material integrity and reduce overall weight Premium YKK thin lightweight zipper personalized with Alpinestars leather pull, plus double slider for a versatile and customizable fit Athletic fit design Ultra-light weight of 265g/m2

Sparco Circuit / Circuit II Carbon Fiber Racing Seat 2028 Expiry The Sparco Circuit Carbon is the carbon fiber version of the Circuit QRT which is a competition seat designed to provide additional head and neck protection. It is constructed with light weight “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The Circuit Carbon includes integrated bolsters to protect the head from lateral impacts. This seat can be used with an FHR (frontal head restraint) device for even greater protection. The ultra-light shell is features impact-absorbing material surround on the headrest. It has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The Circuit Carbon is FIA 8859-1999 approved. SPARCO CIRCUIT CARBON FIBER RACE SEAT TECHNOLOGY Ultralight Pre-Preg Carbon Fiber shellExcellent fitment (for a head restraint seat) into smaller cockpitsExcellent ergonomicsFire-retardant fabricSpecial non-slip fabricFIA 8859-1999 The Sparco Circuit Carbon Fiber is an ultra-light competition seat specifically designed for circuit use. Made from carbon fiber, the Sparco Circuit Carbon Fiber has an ultra-light shell. The Sparco Circuit Carbon Fiber includes integrated bolsters to protect the head. This seat can be used with a Hans device for even greater protection. The ultra-light shell is then wrapped in an impact-absorbing and fire retardant fabric that helps hold the body.  The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear. The Sparco Circuit Carbon Fiber is FIA approved and available in two sizes: Circuit (Standard) and Circuit II (Large). The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear.  SPARCO CIRCUIT CARBON FIBER RACE SEAT SIZING Small / Narrow – up to a 32” waist (pants size)  SPARCO CIRCUIT II CARBON FIBER RACE SEAT SIZING Medium – up to a 36” waist (pants size)  

Sparco EVO Carbon Fiber Racing Seats 2028 Expiry   As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover).  The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. SPARCO EVO RACE SEAT SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment:EVO CARBON – Medium (up to 34” waist)EVO L CARBON – Large (up to 36” waist)EVO XL CARBON – X-Large (38” waist) EVO QRT Racing Seat Technology Ultralight Pre-Preg Carbon Fiber shellExcellent fitment into small vehicle cockpits3 Sizes: Medium through XLExcellent ergonomicsFire retardant fabricSpecial non-slip fabricFIA 8859-1999 approved EVO Carbon Fiber Racing Seat Dimensions EVO Std Dimensions:   EVO L / XL Dimensions:

Sparco ULTRA Carbon Racing Seat 2029 Expiry The Sparco Ultra Carbon competition seat is the lightest FIA 8859-1999 approved seat in the Sparco range, weighing in at a featherweight 8.3 lbs. (3.8kg)! The Ultra Carbon racing seat is constructed with high-strength pre-preg aerospace grade carbon fiber (also known as dry carbon), giving it an optimal strength-to-weight ratio. The Sparco Ultra Carbon seat is a revolutionary design that is installed and used without a fabric cover or padding, minimizing weight and maximizing performance. This also allows for a lower seating position and more direct feedback from the chassis of your race car. The Sparco Ultra Carbon shell is the epitome of form following function. The lightweight monocoque design gives it an extremely comfortable shape that's contoured for a seated driver with the perfect amount of recline and lumbar support. The Sparco Ultra Carbon competition seat was designed to fit into very narrow cockpits wile still offering sizing that fits a standard- or larger-build driver. The Sparco Ultra Carbon is FIA 8859-1999 approved. The Sparco Ultra Carbon seat requires Sparco Aluminum Side Mounts 600W or 600W90 due to the shape of the seat. These mounts will allow the seat to be mounted in the lowest position. Sparco Ultra Carbon Fiber Race Seat Details Manufacturer: Sparco Manufacturer part no.: 008037ZNR Sizing: Medium/Large (up to 36” waist) Weight: 8.3 lbs. (3.8 kg) Homologation: FIA 8859-1999 approved Seat Shell: ultra-lightweight pre-preg carbon fiber Upholstery: none Excellent fitment into small narrow vehicle cockpits Supremely comfortable ergonomics and lower seating position Racing Seat Dimensions

Sparco Prime LT Race Suit (Limited Edition) The Sparco Prime LT race suit is a limited edition suit available only for the US market. The Prime LT design features two unique colorways. This limited edition suit was only made available for a single year in 2021. The Sparco Prime LT race suit is the same suit material developed for the McLaren F1 team and is one of the lightest FIA approved racing suit in the world. The Prime LT race suit has unparalleled technological features created in the Sparco R&D laboratories. This project involved optimizing every detail of the suit in terms of material and construction. Details such as an ultra slim zipper, soft & seamless Nomex/Vicosa wrist and ankle cuffs, neck and shoulder pads further reduced, thinner thread used and stitching flattened even more. The Sparco Prime LT race suit features a three-layer construction using proprietary Sparco technology. The third, outer layer is a double-faced mesh made from original DuPont Nomex Comfort, an innovative fabric that delivers both extreme protection and maximum comfort, woven using the Kompact® system. This material contains a high percentage of antistatic fibers, giving it extremely effective antistatic properties as well as exceptional breathability. The Sparco Prime LT race suit weighs from 240 to 270 grams per square meter (depending on size). SPARCO PRIME LT RACE SUIT TECHNOLOGY Lightest FIA approved suit in the world Exclusive DuPont Nomex Comfort fibers provide superior fire protection and comfort Pre-curved arms and legs Lightweight zipper and collar Breathable stretch panels FIA 8856-2000 approved SKU 001133U

Sparco Legend Kevlar Racing Seat  2029 Expiry Introducing the Sparco Legend Kevlar race seat – a timeless masterpiece inspired by the exhilarating world of 1980s rally racing. With an unmatched blend of heritage and innovation, this seat captures the essence of that golden era, providing rally enthusiasts with an authentic and immersive experience like no other. The Sparco Legend Kevlar race seat pays homage to the rugged spirit of 1980s rally racing, where drivers pushed the limits of their skills and machines across treacherous terrains and unforgiving conditions. Designed with meticulous attention to detail, this seat combines classic aesthetics with modern technology, delivering a fusion of vintage charm and contemporary performance. Sit in the Sparco Legend Kevlar race seat and be transported back in time to an era of iconic rally legends. Crafted from carbon/kevlar and other premium materials, this seat features a retro-inspired design that reflects the era's distinctive style. From the vintage-inspired stitching to the classic embroidered logos, every element has been carefully crafted to evoke nostalgia and celebrate the glory days of rally racing. But the Sparco Legend Kevlar race seat isn't just about looks – it's built to endure the demanding challenges of rally racing. With its reinforced kevlar structure and robust construction, this seat is engineered to withstand the rigors of auto racing. The specially designed padding offers optimal support and comfort, ensuring you stay focused and energized during those long and intense rally stages. In rally racing, safety is paramount, and the Sparco Legend Kevlar race seat excels in this aspect. Built to meet the highest safety standards, this seat provides superior protection in the event of a crash or sudden impact. The integrated headrest and side bolsters offer enhanced support and stability, keeping you securely in place, even during the most demanding maneuvers on unpredictable terrain. As you navigate through gravel, dirt, and mud, the Sparco Legend Kevlar race seat enhances your connection with the car and the road. Its ergonomic design promotes proper posture, allowing you to feel the subtle feedback and nuances of the vehicle's movements. With each twist and turn, the seat's firm yet comfortable grip ensures you maintain optimal control, empowering you to unleash your driving skills to their full potential. Whether you're recreating historic rally moments or embarking on new off-road adventures, the Sparco Legend Kevlar race seat is the perfect companion for your journey. Its universal fitment and compatibility with a wide range of rally cars from the 1980s ensure seamless integration and ease of installation, allowing you to relish the authentic rally experience in your cherished classic or modern rally machine. Embrace the spirit of 1980s rally racing with the Sparco Legend Kevlar race seat – where timeless design meets modern performance. Ignite your passion for rally, feel the adrenaline surge through your veins, and embark on an unforgettable adventure that honors the legacy of those iconic rally warriors. Sparco invites you to relive the glory days of rally racing and create your own legend behind the wheel. Sparco Legend Kevlar Race Seat Sizing Medium / Large (up to 36” waist) Sparco  Kevlar Race Seat Technology Ultra lightweight dry carbon/Kevlar shell Bottom mount only Excellent ergonomics FIA 8859-1999 approved

Sparco Superleggera Race Suit (DISCONTINUED COLORWAYS) The Sparco Superleggera race suit is the lightest FIA 8856-2018 approved suit on the market. The Superleggera is not only lightweight, it's also one of the most comfortable race suits available at any price. It features a special four-way stretch panel that runs from each underarm down to the hip. These side stretch panels, combined with a generous rear stretch panel, give the driver the ultimate in flexibility and range-of-motion when in a seated position. The Sparco Superleggera fire resistant auto race suit also has a breathable inner-thigh stretch panel, 360º floating arm gussets, and pre-curved arms and legs. The Sparco Superleggera auto race suit is both FIA and SFI homologated. SPARCO SUPERLEGGERA RACE SUIT TECHNOLOGY FIA 8856-2018 homologated SFI 3.2A/5 approved Lightest FIA suit on the market Pre-curved arms and legs Lightweight zipper and collar Inner-thigh stretch panel Four-way stretch panels strategically placed throughout SKU 001142

Sparco EVO QRT Performance Racing Seats 2028 Expiry The Performance version of the Evo brings the famous Sparco Seat to the top with leather and alcantara upholstery.  Looks as good on the street as on the track.  As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the  Sparco Evo QRT. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo QRT fits perfectly in a Miata!), the Sparco Evo QRT is sure be a mainstay at the track! The Sparco EVO QRT series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. Available in cloth or vinyl. The Sparco EVO QRT is FIA approved. The  Sparco EVO QRT Racing Seat SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment: EVO S – Small (up to 32” waist) EVO – Medium (up to 34” waist) EVO L – Large (up to 36” waist) EVO XL – Extra Large (38” waist) WHAT IS SPARCO QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. The  Sparco EVO QRT Racing Seat TECHNOLOGY QRT Ultralight fiberglass composite shell Excellent fitment into small cockpits 4 Sizes: Small through XL Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved The  Sparco EVO QRT Racing Seat DIMENSIONS EVO S Dimensions:     EVO Std Dimensions: EVO L / XL Dimensions:

Alpinestars GP Tech v3 Driver Race Suit The GP Tech v3 race suit features an outer shell twill material developed exclusively for Alpinestars which is combined with an innovative aramidic-based knit lining for optimum levels of comfort, fire protection, light weight and comfort. Thanks to the introduction of the aramidic base lining with an open weave structure, this race suit is superbly breathable, and these levels are further enhanced by the breathable panels on the side. The GP Tech v3 race suit also incorporates lightweight stretchable panels at the center back, lower back, elbow, crotch and knee zone to provide great flexibility both in and out of the car. ALPINESTARS GP TECH V3 RACE SUIT PROTECTION Certified to the FIA 8856-2018 homologation standard Super-lightweight and breathable multi-layer suit incorporating thin stretchable panels, for maximum comfort and effective regulation of body temperature Nomex® anti-static outer shell fabric for exceptional heat and flame-resistant proprieties Sold with laundry bag for convenience and effective material fiber protection ALPINESTARS GP TECH V3 RACE SUIT DETAILS Strategically positioned Formula One derived stretch panels at center back and spine, lower back, elbows, crotch and knees enhance flexibility Alpinestars fully-floating arm construction with stretchable knit fabric ensures minimal material resistance while driving Soft and thin wrist and ankle cuffs for maximum comfort and reduced weight Soft collar with knit fabric and secure hook and loop closure for improved comfort Alpinestars exclusive shoulder epaulette construction provides an effective feature for the extraction of the driver in the event of a crash Printed logos help maintain suit’s material integrity and reduce weight Premium YKK thin lightweight zipper with double slider Thigh pockets for convenient, unobtrusive storage Athletic fit Weight: 325g/m2

Sparco Eagle RS8.2 Driver Race Suit The Sparco Eagle RS-8.2 race suit uses a combination of HOCOTEX and Eagle fabrics to produce an ultra lightweight and breathable race suit. With the aim of obtaining a closer and more modern fit, preformed armholes have been used, and, in line with the requirements linked to driver mobility during a race, the elasticized panels have been optimized (armholes, sides and elasticized back). The main structure of the Sparco Eagle RS8.2 race suit, like in the previous version, is the tried and tested characteristic HOCOTEX, (single-layer weave of 0.6mm ultra-thin fabric), combined with other accessory fabrics like Sparco's Eagle elasticized fabric (well-known and used in various Sparco race suit models), and panels in contrast in flat, ultra-light cloth for anti-abrasion reinforcements on the legs and arms. Stitched quilting made with thin yarn, concealed pockets, a pre-formed neck, and belt with the characteristic Sparco logo round out the functional features of the Sparco Eagle RS8.2. SPARCO EAGLE RS 8.2 RACE SUIT DETAILS This suit weighs between 290 and 320 grams per square meter Pre-curved arms and legs prevent material bunching and pulling when in the driving position Strategic stretch panels throughout Available in sizes EU64 and EU66 only FIA 8856-2000 homologation

Sparco Prime Spec 1 Race Suit SAVE OVER $1,100 OFF THE ORIGINAL RETAIL PRICE! The Sparco Prime Spec 1 race suit is a USA-exclusive race suit that was designed to improve upon Sparco’s original top-of-the-line Prime SP-16 race suit. The first thing you'll notice is the new race suit's updated design. The Prime Spec 1 race suit adds two new multi-color options. In addition to the new design, the Sparco Prime Spec 1 race suit adds extra features like fully-floating sleeves, a waist belt, and internal pockets. THE LIGHTEST FIA-APPROVED SUIT ON THE MARKET The Sparco Prime Spec 1 race suit, made in collaboration with the McLaren Formula One team, is the lightest FIA-approved racing suit in the world. The Prime Spec 1 race suit boasts unparalleled technological features created in Sparco’s R&D laboratories. This project involved optimizing every detail in terms of materials and construction. This includes an ultra slim zipper, soft seamless Nomex/Vicosa® wrist and ankle cuffs, the neck and shoulder pads were further reduced, and thinner thread was used with flatter stitching throughout. The Sparco Prime Spec 1 race suit features three-layer construction using proprietary Sparco technology. The third outer layer is a double-faced mesh made from original DuPont Nomex Comfort® woven using the Kompact® system. This material contains a high percentage of antistatic fibers which provide extremely effective antistatic properties as well as breathability. The Sparco Prime Spec 1 race suit features pre-curved arms and legs as well as strategic stretch panels, giving the suit unbelievable comfort. The Sparco Prime Spec 1 race suit is available in two colorways. SPARCO PRIME SPEC 1 RACE SUIT TECHNOLOGY FIA 8856-2000 approved Lightest FIA approved suit in the world Exclusive DuPont Nomex® fibers provide superior fire protection and comfort Pre-curved arms and legs Strategic stretch panels Seamless arm and leg stitching