All

Professional Refill/Re-Certification of Electrically-Actuated Fire Bottle NOTE: Before you send us your SPA Technique fire suppression system bottle, please print, fill out, and submit this Discovery Parts SPA Technique Re-Certification Form. SPA AFFF systems must be inspected and re-certified every two years. This service includes inspection of the bottle, dip tube and firing head; refilling with SPA AFFF fluid; nitrogen pressurization to factory specification; and FIA recertification when applicable. Additional charges apply if replacement of the firing head or other parts is required. SPA AFFF Refill & Re-Certification Details: Bottles that are not more than two years past the service-due date can be serviced. Bottles that are more than two years past their service-due date cannot be serviced (SPA and FIA requirement). Bottles over five years old must be hydrostatically tested before service at an extra cost (DOT requirement). Bottles over ten years old cannot be serviced (SPA and FIA requirement). Bottles originally designed for gas (Halon / FE-36) or dry chem (powder) cannot be retrofitted with AFFF. Please print, fill out, and submit this Discovery Parts SPA Technique Re-Certification Form. Shipping Your Fire Bottle If your fire bottle has been completely discharged, you can ship it to us empty via overnight, two- or three-day air, or ground. Once your bottle is serviced by Discovery Parts, however, DOT regulations require that we return your fire bottle via ground shipping. It can not be returned via air transport. Return UPS or FedEx ground shipping is included with this service. In Store/Same Day Fire Bottle Service Fire suppression systems can be dropped off at our store at Atlanta Motorsports Park in Dawsonville, GA, or at our mobile trackside support vehicle at any race event our trackside support staff are attending. Same-day service maybe performed at our Dawsonville, GA, store for an additional $100 charge. Same-day service is sometime available during regular store hours, Tuesday through Friday. Please call ahead at (888) 748-7223 to inquire about same-day service availability. Our trackside support vehicles are not equipped to perform same-day fire suppression system service. Do Not Discharge An Intact Fire Bottle If your SPA Technique electrically-actuated fire system certification has expired and it needs to be re-certified, our refill and re-certification service is typically all you will need. Do not discharge your fire bottle if it is still charged. If you discharged your SPA electrical fire system, you will need to either replace or re-arm the electrically actuated firing head. You can re-arm the firing head with the SPA-SP-02-001. A Note About Old Fire Bottles Older bottles with a single welded seam around the middle fail the new hydrostatic test about 99% of the time. Newer bottles with welded seams at each end have a much higher passing rate. If you have an older bottle, it is likely that the DOT will not allow us to refill it. In that case, we usually have new replacement bottles in stock and ready to ship. Shipping Your Bottle To Discovery Parts Create an account at Discovery Parts Ship your bottle, insured and with tracking, to: Discovery Parts SPA Recharge20 Duck Thurmond RoadUnit B-2Dawsonville, GA  30534

0458.08.13.44 (08 Compound) One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range.   Fits Mazda Miata, 1990-93, Rear

Alpinestars Tech-1 ZX v3 Racing Gloves Alpinestars is always looking for new ways to improve driver safety and increase protection. This generation of ZX auto gloves provides nearly a 20% improvement in heat transmission via the new top layer of honeycomb NOMEX materials. This has been achieved while still offering the exceptional combination of fit, feel and grip for which our gloves are known. Developed with leading drivers in F1 and Endurance, with a new dual-sided honeycomb two-layer fabric, the Tech-1 ZX v3 Gloves offer exceptional protection while significantly improving breathability. The new 3D silicon print palm provides excellent levels of grip from a reduced print surface, giving more feel. The glove’s pre-curve shape has been increased from the previous version, resulting in better fit and less material bunching when holding the wheel. ALPINESTARS TECH 1-ZX V3 GLOVE CONSTRUCTION AND FEATURES Advanced, breathable, and flame-resistant honeycomb, aramidic fiber main assembly with bonded aramidic lining to ensure for optimal temperature control and maximum comfort and feel. External seams provide superior comfort and prevent any excessive pressure points from forming on the hands while driving. Pre-curved fingers and palm help improve fit and reduce fatigue while driving. Outer grip zones for superb control and feel on the cockpit’s controls. Ergonomically designed 3D grip technology on palm and fingers with strategically positioned silicon surface patterning for improved flexibility and control. Touchscreen compatible thumb and second fingertip. Certified to FIA 8856-2018 homologation standard ALPINESTARS TECH 1-ZX V3 GLOVE SIZE CHART

OMP One Evo X Nomex Race Gloves Closeout Savings on OMP One Evo X Nomex Gloves! The One Evo X Nomex Glove from OMP is a top-tier, extremely lightweight glove with pre-curved fingers for supreme comfort on your steering wheel. It's hard to describe just how amazingly lightweight and breathable these gloves are -- you have to feel them to believe it! The palm, ball and fingers have an ultra-grippy, raised triangular silicone pattern that's second to none when it comes to maintaining your grip under even the most intense conditions on track. COMFORTABLE, BREATHABLE, HIGH-TECH The One Evo X Nomex Glove upper is made from extremely breathable and comfortable material, with an exclusive high-tech palm in silicon rubber proven to give you optimal grip, dexterity and sensitivity. As a top-tier glove, it features external seams to minimize pressure points on your fingers and palm, with an elastic wrist stop for excellent fitting comfort. The OMP One Evo X glove has quickly become a staff favorite at Discovery Parts. It is a premium racing glove that truly delivers on all fronts! OMP ONE EVO X GLOVE DETAILS Homologation: FIA 8856-2018 Available Colors: Black; Black/Fluorescent Yellow; Navy Blue/Cyan; Red; White

Schuberth Visors For SF4/SP1/SK1 (Legacy Latch) These Schuberth Visors for SF4, SP1, and SK1 helmets are 3mm thick, 3D-injected replacement shields developed from Schuberth’s top-level motorsport experience. Available in twelve color and finish options, these legacy-latch visors let drivers tailor visibility for clear daylight, changing light, wet-weather use, or a more aggressive mirrored race look. Premium replacement visors for Schuberth SF4, SP1, and SK1 helmets Each standard visor is equipped with a Pinlock 120 fog-resistant lens, clear tear-off buttons, and a clear locking lever. The Clear Rain version uses an adhesive fog-resistant lens instead. Every visor also includes a soft visor pouch to help protect the lens when it is not mounted on the helmet. Features Fits Schuberth SF4, SP1, and SK1 helmets with the legacy latch visor system 3mm thick, 3D-injected visor construction Developed from Schuberth motorsport and F1 expertise Twelve visor color and coating options available Standard visors include Pinlock 120 fog-resistant lens Standard visors include clear tear-off buttons and clear locking lever Clear Rain visor uses an adhesive fog-resistant lens Soft visor pouch included with each visor Available Visor Colors Clear Clear Red Clear Blue Clear Silver Light Red Dark Red Light Blue Dark Blue Light Smoke Dark Smoke Clear Rain Light Silver Schuberth Visor FAQs: Which Schuberth helmets do these visors fit? These visors are listed for Schuberth SF4, SP1, and SK1 helmets using the legacy latch visor system. Do the visors include anti-fog protection? Yes. Standard visor options include a Pinlock 120 fog-resistant lens. The Clear Rain visor instead uses an adhesive fog-resistant lens. Are tear-off buttons included? Yes. HMS specifies clear tear-off buttons and a clear locking lever on the standard visor versions. What is the difference between the Clear Rain visor and the standard Clear visor? The Clear Rain visor is built for wet-weather use and uses an adhesive fog-resistant lens, while the standard clear visor uses the Pinlock 120 setup. Does each visor come with storage protection? Yes. Each visor includes a soft visor pouch to help protect it when not in use. Refresh your Schuberth helmet with a visor color and tint that matches your race-day visibility needs.

CMS Performance Sub Strap + Lap Belt Mount for Porsche This Mount Fits All Variants of the Following Cars: Porsche 911 (1997+) Porsche Boxster (1997+) Porsche Cayman (2006+) The Best Way to Mount Harness Lap and Sub Belts in Your Porsche The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Porsche seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original Porsche mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap Mount for Corvette C6 This Mount Fits All Variants of the Following Cars: Chevrolet Corvette C6 (All) The Best Way to Mount Harness Lap and Sub Belts in Your C6 Corvette The CMS Performance Sub Strap Mount is designed to be installed and used with your factory seats, giving you strong, secure mounting points for racing harness sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap Mount provides an extremely strong structure to which you can wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap Mount Details Manufacturer: CMS Performance Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap Mount for Corvette C7 This Mount Fits All Variants of the Following Cars: Chevrolet Corvette C7 (All) The Best Way to Mount Harness Lap and Sub Belts in Your C7 Corvette The CMS Performance Sub Strap Mount is designed to be installed and used with your factory seats, giving you strong, secure mounting points for racing harness sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap Mount provides an extremely strong structure to which you can wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap Mount Details Manufacturer: CMS Performance Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for GR Supra Fits the Following Vehicles: Toyota GR Supra, A90/91 (2020+) Toyota GR86 (2022+) Subaru BRZ, ZN8 (2022+) The Best Way to Mount Harness Lap and Sub Belts in Your Toyota/Subaru The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory seats, giving you strong, secure mounting points for your racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-001 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for Toyota GR Corolla Fits the Following Vehicles: Toyota GR Corolla (2023+) The Best Way to Mount Harness Lap and Sub Belts in Your GR86/BRZ The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Toyota GR seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original seat mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-005 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

OMP First Racing Gloves FIA 8856-2018 Homologated Sleek and lightweight, OMP's re-designed First Racing Gloves offer the comfortable design and features of top end models at a fraction of the price. External stitching (typically available only on the most expensive racing gloves) and a pre-curved shape vastly improve fit and comfort while reducing hand fatigue. The First printed silicon-rubber palms provide maximum grip with minimum bulk. An elastic wrist keeps the gloves fitted snug while being easy to put on/take off, and the straight cut gauntlet maintains a clean look. The OMP First Evo's combination of top-end features and budget friendliness has made these the new staff favorite racing gloves at any price! OMP First Auto Racing Glove Construction Palm has fire-retardant, silicon rubber inserts for optimal grip and sensitivity. Straight cut on the gauntlet and elastic band on the wrists. External seams for maximum comfort. Pre-curved design for optimal comfort. OMP First Auto Glove Protection Certified to the new FIA 8856-2018 homologation standard. Extended cuff length in accordance with new FIA homologation standards for maximum protection against fire and heat. OMP First Auto Racing Glove Size Chart

Sparco Gulf Racing Stage Rucksack Race-Ready Gig Bag for Gear-Heavy Drivers Sparco Gulf Racing Stage Rucksack give kart racers the grip, response, and comfort they need to perform at their best. Built to handle the rigors of competition, they deliver control and style in every lap. Sparco Gulf Racing Stage Rucksack Features Purpose-Built Helmet & Shoe Compartments: Keep your most important gear protected and separated with padded, designated zones. Reinforced Construction: Quilted padding lines the interior while a rugged under compartment gives structure and shock resistance on the go. Double Harness Straps: Two wide, adjustable straps cinch your load securely—perfect for race days when everything gets packed to the limit. Telescoping Pull Handle & Durable Wheels: Maneuver easily through pits, airports, or garages with reinforced wheels and a solid extending handle. Front Document Pocket: Ideal for quick-access items like tech sheets, schedules, or passports when traveling for events. Sparco Gulf Stage Rucksack FAQs: Will this rucksack fit a full-size racing helmet? Yes, it features a dedicated helmet compartment designed specifically for motorsport use. Is it suitable for air travel? Absolutely. It has reinforced wheels and a telescoping handle, making it ideal for travel to national or international events. How much gear can it carry? It’s built to hold your helmet, shoes, suit, accessories, and more—perfect for full track-day kits. Serious Protection, Iconic Style If you're serious about racing, your gear deserves serious protection. The Sparco Gulf Stage Rucksack brings premium materials, smart design, and iconic Gulf style to your travel setup—because a pro-level driver should never look like a rookie in the paddock.

OMP Summer-K Kart Racing Suit When the track heats up, the OMP Summer-K Overall Karting Suit steps in to keep you cool, fast, and looking like a true karting champion. Designed for warm-weather racing warriors, this one-piece suit combines lightweight performance with maximum comfort, ensuring you stay focused on shaving seconds off your lap time—not sweating through your gear. Features That'll Make You Smile One-Layer Wonder: The Summer-K’s single-layer design is light as a feather and just as breezy. Feel the airflow as you conquer those hairpin turns. Kart-Specific Fit: No bulk, no drag. This suit hugs where it counts and flexes where it needs to, giving you freedom to move without restriction. Breathable Panels: Strategically placed ventilation keeps you cooler than the other side of the pillow—even when the track temp skyrockets. Style Meets Performance: Sleek, race-ready aesthetics. OMP Summer-K Overall Karting Suit Specifications Material: Ultra-lightweight single-layer fabric Ventilation: Integrated breathable mesh panels Certification: Meets rigorous karting safety standards Fit: Ergonomic cut for optimal movement Weight: Super lightweight for hot-weather racing OMP Summer-K Kart Racing Suit Size Chart OMP Summer-K Kart Racing Suit FAQs Q: Is the Summer-K suit fireproof?A: Nope! This suit is designed specifically for karting, where fire resistance isn’t required. It focuses on breathability and lightweight performance. Q: Does it come in different sizes?A: Absolutely! From pint-sized racers to full-grown speed demons, we’ve got sizes to fit everyone. Q: Can I use this suit for outdoor karting in extreme heat?A: Yes! This suit was born for sunny, sweltering days on the track. The ventilation panels are a game changer. Q: Is it machine washable?A: Yes, just follow the care instructions. Keeping it fresh is as easy as conquering your next apex! Take the Lead Today Why settle for ordinary when you can race in extraordinary comfort? The OMP Summer-K Overall Karting Suit isn’t just a piece of gear; it’s your summer racing MVP. Get yours now and own the track in style, comfort, and total domination!

CMS Performance Sub Strap Mount for Corvette C8 This Mount Fits All Variants of the Following Cars: Chevrolet Corvette C8  Chevrolet Corvette C8 Z51 Chevrolet Corvette C8 Z06 Chevrolet Corvette C8 ZR-1 The Best Way to Mount Harness Lap and Sub Belts in Your C8 Corvette The CMS Performance Sub Strap Mount is designed to be installed and used with your factory seats, giving you strong, secure mounting points for racing harness sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap Mount provides an extremely strong structure to which you can wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap Mount Details Manufacturer: CMS Performance Manufacturer Part Number: Harninstall-C8 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for GT350/GT350R/S550 This Mount Fits All Variants of the Following Cars: Ford Performance Shelby GT350 (2015-2020) Ford Performance Shelby GT350R (2016-2020) Ford Performance Shelby GT500 (2021+) Ford S550 Mustang GT (2015-2023) The Best Way to Mount Harness Lap and Sub Belts in Your Shelby Mustang The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Ford Performance seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original Ford mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-003 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for BMW This Mount Fits All Sub-Models Of Current BMW Cars The Best Way to Mount Harness Lap and Sub Belts in Your BMW  The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory BMW seats, giving you strong, secure mounting points for your racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original BMW mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-001 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware